In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?
In the garage I have a Netgear Router. it is connected by a ethernet cable, I have a 1tb drive that I want to use there. On the drive there is only a USB port. on the Netgear there is only ethernet ports. is there an adapter that will work for that?
It's not that simple. You need a "smart" device to connect a hard drive to, like a Time Capsule, or another computer, or an Airport Extreme/Express that was made to share a drive, or some other brand router that has a USB port for sharing a drive, etc.
Similar Messages
-
I have a Macbook, 13" screen, purchased in 2007. I want to hook it up to my HDTV; I purchased a mini display port to hdmi adapter but it does not fit. Any suggestions?
If you connect yourMacBook using a MiniDVI/HDMI adapter you will need to use external speakers for audio since the pre-2010 MacBooks will only send video through the MiniDVI or MiniDisplay Port . The MiniDVI/HDMI doesn't carry audio and there's no audio plugs on the TV to work with HDMI since it's expecting audio with the HDMI.
If your TV has a DVI input plug you can use a MiniDisplayPort/DVI adapter. Then a DVI cable to the DVI input plug on the TV. The TV will have RCA audio plugs for use with the DVI. Plus DVI gives a sharper image than HDMI. -
i have att u verse modem and it wi fi was not working. So i got net gear wi fi and connected to att modem . i connected my apple TV via Ethernet cable to att uverse modem . i did not want slow down my wi fi speed. My Apple phone is on Netgear wifi .Now airplay is not working .
Make sure that the Att Modem goes to the netgear router via ethernet cable. Then connect your Apple Tv with a ethernet cable to the back of the net gear router. Airplay wants it to both be connected to the same device, usually.
-
Any suggestions on how to get wifi to work? I have a multitech router and can connect with a computer wirelessly but not the ipad.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398 -
Is there such a modle of iPhone 4S, that will work for the following?
I have read a couple discussions here, yet 99% of them are talking about using Verizon / Sprint's iPhone 4S on AT&T, or another way. I'm not finding an answer of my simple question, that is, I want to get an iPhone 4S, which works for CDMA (if not both, at least Verizon), AT&T, T-Mobile, and GSM outside the US.
What would be the right way to get one? I ran into problem because I know:
- An iP4S obtinaed from CDMA (Verizon / Sprint) could be SIM unlocked but only works for GSM carrier outside the US. WIll not work for AT&T or T-Mobile.
- An iP4S purchased contract-free will work for AT&T, T-Mobile, and GSM outside the US, but not CDMA.
- An iP4S obtinaed from AT&T, works in AT&T only, the SIM and CDMA cannot be unlocked.Thanks for you all above to clarify my question. One last question here.
Taking GSM out of the discussion, can a Verizon iPhone 4S be used in Sprint? Or if I switch from Verizon to Sprint, I simply have to sell my Verizon iPhone 4S and buy another 4S under Sprint, even they are mechanically identical and the only difference is how software profile is applied? -
One of the features that I miss since uploading 7 is the ability to "Move and Scale" a photo that I want to use as wallpaper. Techie I spoke with said that I should post this on Product Feedback, but I can't find that.
Sorry.
Try this: http://www.apple.com/feedback/iphone.html -
How do I set up my air port extreme to do port forwarding? Running 10.7.4 I have a IP camera on my local wireless net work that I want to use from my iPhone 4s and other computers.
In most cable systems, the router you have will plug into your modem and just work automatically. A NAT (Network Address Translation) router takes your external IP and hands out LAN (Local Area Network) based IPs. All of the devices you are working with right now should handle the change automatically unless you've changed from the default automatic configuration.
The problem with your wireless end of this is that the iPhone is not yet 802.11n, only 802.11g. Because that router is not dual band, all of your wifi devices will be forced to slow down to 802.11g speeds. This won't matter much for each device that's connecting to the internet, as your bottleneck is still going to be there. Where you will see slowdowns is device to device connections, like transferring data between the devices. -
I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?
Welcome to Apple Support Communities
Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html -
My PowerBook G4 says that it's connected to wifi, but it still no internet connection. The connection will work for a while, and then I'll have to run diagnostics and it will work again for a few minutes and then stop working again. What's going on??
Basic troubleshooting techniques for any problem
Restart the computer = joy?
Reset the router = joy?
Restart the computer in Safe Mode = joy?
ask yourself "What changed immediately preceding the onset of the problem?" = Anything... hardware, software, cabling, environment (interference source)
ÇÇÇ -
I decide to use Business Catalyst for hosting because it came with my CC membership, However it seems that some of the main things I wanted to do might not be available or can only be used for additional membership fees. I wish that this was more clear beforehand! I am happy with the built in things but I am a little disappointed in finding out some of the features that I wanted to use, such as in browser editing might not even be available at all as long as I use MUSE. Managing customers using secure zones, and some other page level sign in forms seem to be not available also
Is this correct, if so what other limits can I expect?People do fumble their way through going into the BC developer code editor online to do layouts etc and then to Muse and back but Muse only covers basic modules and templates. Not all the tag's, layouts, tag features and the guts of what being a web developer/designer is.
So you can go so far, but then you will hit a wall like everyone does with Muse.
Muse is not designed to do everything out there to make a site, it Cant, those sorts of tools from frontpage to Muse can only take you so far.
I can not just go build a house with the tools from the big depot. They may all do the job, but I do not have the knowledge or the plans to do so. -
The cc on my acct doesn't have the $ to buy an app that I want but my account has $50.00 credit. Why can't I purchase the app with gift card?
It says there is a problem with my payment information and prompts me to change payment info but I am only able to change it to another type of cc not gift card balance
-
HT1588 when i play a movie in itunes the audio will work for a little bit then stop
when i play a movie in itunes the audio will work for a little bit then stop
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Troubleshooting iTunes for Windows Vista or Windows 7 video playback performance issues
http://support.apple.com/kb/TS1718
-Griff W. -
Have 2 iPads and 2 i phones and a late 2006 Mac with 2G dual port processors and 3 G RAM, Need lion to utilize features of iCloud linking all devices. Currently running 10.6.8 with no problem. Is it likely that Lion will work for me or am I asking to much from the Mac?
Jimboastrojimbo wrote:
Is it likely that Lion will work for me or am I asking to much from the Mac?
As long as it meets the minimum technical specifications, although the more above the minimum you have, the better the experience. -
I have an old iphone 3G that I want to use as an ipod touch. It does have a sim card in it and it has been reset. For some reason it will not pick up my wireless network in my house, or any other wireless network. What could be the problem?
Is this the problem:
iOS: Wi-Fi or Bluetooth settings grayed out or dim -
My TV is mounted on a wall so I can't connect the Apple TV device. Is it possible to connect to an HD Cable Box and send signal to TV that way? Other problem is that Box only has one HDMI socket so would also have to use a splitter. Tried Apple Support but couldn't offer a solution. I can't be the only person with this issue surely?
Help!No, unless you are using a home theatre system already, your only option is to connect to the TV.
Maybe you are looking for
-
Interactive Report Column Heading Filters using LIKE instead of =
Still on APEX 3.1 I have an inter active report with a column Like Below select case when trunc(c.resp_contact_dt, 'MM') = trunc(sysdate, 'MM') or trunc(c.oth_contact_dt, 'MM') = trunc(sysdate, 'MM') then '<img src="/i/contact_2_green.png" alt="RESP
-
How to install My forms and reports in IAS?
Hi Gurus, I installed database 10g,IAS10g,forms and reports10g separately. now i want to configure my forms and reports in IAS 10g.i can run the form from formbuilder after started the oc4j.but i am not able to run in ias . anybody know the link" how
-
Configuration steps for Resource Related Billing from both SD and CS perspe
I need to configure RRB for my customer. I require config steps and transaction steps for the same. Your mail on [email protected] will be highly appreciated. Thanks in advance Regards, Bobby
-
To remove Acknowledgement status in Async scenario.
Hi All, I have a async scenario where in Sender is Business System and Receiver is a Business Component(Business Service). Sender - FTP Receiver - Http I tested using the given payload in RWB. The message reached successfully and target confirms it.
-
Default Apache Indexes: add "mail to" button
Howdy, I run a LAMP server and I am currently hosting some .pdf's for college, being shown using the default apache Indexes option (with some .css I found) I would like to add a button, visible when hovering, to mail each file to an email address (to