In the Graphic Tab and Work Center Error The Page Cannot be displayed

Hi In the Solar01 and also in the Solman_Workcenter I am getting error "The Page Cannot be displayed"
In the Solar01 - I have Business Processes save and under the Graphic Tab when I am clicking on the correct Business Scenario Node. I am expected Graph to display. But Showing error
In the Solman_Workcenter - I set up the added the Starndard Role Busing Solaman Basic Role and + implementation role. When i go under Solman_workcenter transaction I am getting the same prolbem i.e "The Page Cannot be displayed"
Any Idea friends.
Appreciate your help
-Santh

Hi,
Refer note 834832. Check activation of services in transaction SICF and the patch level of your SAP GUI.
Thanks.
Kathir

Similar Messages

Customer self service form gives the error of "Page cannot be displayed"

Hi All,
Customer self service form from Navigation: Recievables -> Customers --> Standard gives the error of "Page cannot be displayed" but the same form gets opened when i navigate that from Order Management responsibility
Thanks&Regards,
APPS DBA

Hi All,
I have been trying to install the EBS 11i in configured system core 2 duo with 1 gb ram and 250 gb HDD,
have been following the below steps to install the EBS 11i,
1.installed Win20003 server edition
2.VC++ and copyind the link file into windows\system32,
3.GNU make done the path set everything,
4.MKS tool kit,
5IP config and installing MS loopback,
started the installtion direct from the DVDs,
Pre-Installtion everything was OK,
but after done everything I got struck last min, where the popup window appeared as login page responding but i did wait for 30 min and nothing has happened.
So closed and I restarted the System and I have restarted process putting 1st DVD and given the command rapidwiz -restart.from command prompt.
and Again its started as a new installtion, and preinstatltion wizard has came.
where I haeve commited the mistake i did not understand...?
Please guide me
regards
Satya

E-Recruitment error message :Page cannot be displayed

Hi E u2013Recruitment Experts,
While testing the E rec BSP pages from SE80 I am getting the error message:
Page cannot be displayed.
What I have done is as follows:
Step 1:defined the context in table V77RCF_CONTEXT
Step 2:defined the element of container sequence in table V77RCF_CS_ITEMC by copyin the data from table V77RCF_CS_ITEM
Step3. defined the container sequence in table V77RCF_CS_SEQC and defined the element.
Step 4.defined link for start pages in table V77RCF_SP_LINKC while copying the data from table V77RCF_SP_LINK
Step 5.Define Start page groups in table V77RCF_SP_GROUPC while copying the enteries from V77RCF_SP_GROUP
Step 6;Defined Start pages in table V77RCF_SP_ASIDC while copying enteries from table V77RCF_SP_ASID
Step 8:I generated the url using the program RCF_GENERATE_URLS using Https protocol
Apart from above setting I have also made entries in the following customer tables:
T77RCF_SP_ID(C) - Startpages
T77RCF_SP_ID(C)T - Startpages texttable
T77RCF_SP_GROUP(C) - Startpage groups (the blocks with a number of links)
T77RCF_SP_GROUPT/GRPCT - Startpage groups texttable
T77RCF_SP_LINK(C) - Links
T77RCF_SP_LINK(C)T - Links texttable
T77RCF_SP_ASID(C) - assignment of groups to startpages
T77RCF_SP_ASGRP(C)
But still I am getting the error message that the page cannot be displayed
Can any body tell me where I have missed out
Thanks and best regards
Rajeev chhabra

Hi Naddy,
I could not find the error log in the given T code.Is there anything else where I should look at.
Cheers
Rajeev

Has version 4 eliminated the save tabs and quit when closing the browser?

I had the beta version of firefox 4, but now that i got the latest version 4.0, I no longer receive the option of saving my open tabs when I close the browser window. I am only warned that I am going to close them or I can cancel. I there any way I can save the open tabs?

You can set the warn prefs on the about:config page to true via the right-click context menu or toggle with a double left-click.
* browser.showQuitWarning, see http://blog.zpao.com/post/3174360617/about-that-quit-dialog
* browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
* browser.warnOnQuit , see http://kb.mozillazine.org/browser.warnOnQuit
* browser.warnOnRestart , see http://kb.mozillazine.org/browser.warnOnRestart
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
You can use Firefox > History > Restore Previous Session to get back the previous session.
There is also a "Restore Previous Session" button on the default about:home Home page.
Another possibility is to use:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

Webgui Error SRM Page cannot be displayed

Hi,
I a m getting the following error in the SRM portal screen.
The following is the my URL link
*http://orange.dht.com:8000/sap/bc/gui/sap/its/bbpstart?sap-client=001*
The page cannot be displayed. Error displayed as below in browser.
The page you are looking for is currently unavailable. The Web site might be experiencing technical difficulties, or you may need to adjust your browser settings.
Please try the following:
Click the Refresh button, or try again later.
If you typed the page address in the Address bar, make sure that it is spelled correctly.
To check your connection settings, click the Tools menu, and then click Internet Options. On the Connections tab, click Settings. The settings should match those provided by your local area network (LAN) administrator or Internet service provider (ISP).
See if your Internet connection settings are being detected. You can set Microsoft Windows to examine your network and automatically discover network connection settings (if your network administrator has enabled this setting).
Click the Tools menu, and then click Internet Options.
On the Connections tab, click LAN Settings.
Select Automatically detect settings, and then click OK.
Some sites require 128-bit connection security. Click the Help menu and then click About Internet Explorer to determine what strength security you have installed.
If you are trying to reach a secure site, make sure your Security settings can support it. Click the Tools menu, and then click Internet Options. On the Advanced tab, scroll to the Security section and check settings for SSL 2.0, SSL 3.0, TLS 1.0, PCT 1.0.
Click the Back button to try another link.
Cannot find server or DNS Error
Internet Explorer
I have publised all the templates. Main page of the SRM is opened .entered the user Id & pwd.
Screen appears . If i press on Click SHOP -I am getting Page cannot be displayed. We areusing IE 6.0
Any Confign is missed . I have entered the URL in table also
Can you tell what is the error.
Regards
G.Ganesh Kuamr

Hi,
I have checked the view source code. It is having correct details
for eg..
SAP Integrated ITS, WebAS: C11, workprocess: 0
All rights reserved.
Creation time: Thu Dec 03 11:10:16 2009
Charset: utf-8
Template: bbpstart/99/bbpglobal_800.html -->

I published the Template again for BBPGLOBAL.
Only page cannot be displayed is coming.
There is some link missing between the SRM server and the ITS.
Can you figure out what it is ? We are stuck
Regards
G.Ganesh Kumar

LYNC 2013 control panel error: this page cannot be displayed

Dear sir,
Now i am suffering with the lync 2013 control panel problem, i cannot open it and got the error "This page can't be displayed" as below screenshot shows,
I've tried some ways, but still same problem
1. Reflush the dns, checked the A record and SRV record of the FE are normally.
2. checked the IIS and also cannot find any problem.
3, reboot the FE server/IIS, and AD.
4. i can open the console page normally via web :https://localhost/cscp
5. i can ping the FE server domain name and return the right IP info.

Hi TECH-Tommy,
The certificate is under “Personal” store.
In addition, can you open the page via
https://admin.domain.com ?
Also please try to clear IE cache and treat the FQDNs for admin, pool or FE server name as trusted zone.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

CNR2-assign person to work center error: the cost center is deleted

Hi guys,
i have a problem with assigning a person to a work center using CNR2.
i select the person and i add it but when i hit SAVE i get this warning message:
"RP718: a segment could not be derived". the person will then be allocated to the work center BUT when i check in PA30 i can see that the persons cost center is DELETED :O.
could you please help me with this? i tried a lot of scenarios but i could still not find the answer.
thanks,
emi

Hi
Cost Center must be maintained for that person in HR master data. Please have your HR person look into this and maintain the data and try again. Cost center and Atype of that person would bring in actual costs (equivalent of hours) on the receiving objects when time sheet is being recorded.
Regards,
PSR

Install of Firebug causes: Two title bars, inability to open the addons tab, and inability to use the Feedback feature, etc.

After further research, I feel this should be categorized as a plugin issue...
Firebug 1.7X A10 causes two Title bars (the standard windows bar, and a second just inside with the new orange Firefox tab...both with minimize/maximize/close buttons), plus other odd behavior listed below:
Any saved tabs from before the install/enable are gone.
Choosing Addons from the menu does nothing. After opening a new empty tab the Addons manager does load.
Choosing Feedback->Makes me xxxx, does nothing.
Hitting reload button does nothing
URL bar (page address) stays the same between tabs (though the loaded page changes)
Firebug addon works fine.
After getting to the Addon Manager (this took a bit of work to do), and disabling Firebug, all problems disappeared. My previous tab history also returned.
This seems to be unique to WinXP. I have installed this Firebug version with Win7 successfully.

The two titlebars is a known bug - http://code.google.com/p/fbug/issues/detail?id=4012

When clicking on a link on a web page it would go to that page in the same tab and you could use the GO BACK button to bring up the previous page? Now clicking the link always goes to a new tab, can this be fixed.

Tried to change tab options and it didn't help.

It's a good idea to try disabling Flash completely and see whether the problem continues. If it does, then my guess is incorrect. To test that, open this tab:
orange Firefox button (or Tools menu) > Add-ons > Plugins category
Here you can locate Shockwave Flash and use the Disable button. Keep this tab open for easy access when doing your test.
''If your test confirms that Flash is causing the problem,'' then the other thread has two suggested workarounds. The first is simple to understand (keep some Flash running at all times) but may be inconvenient to do all the time. The second is trickier because it requires editing a file in (or creating and then dragging a file into) a system folder. Fortunately you only need to do it once.

Cannot download adobe pg..error "this page cannot be displayed" --web address is somehow wrong

company adobe endst cannot be printed....keep getting "this page cannot be displayed"
trouble shooting show connection problem ..with no details
we have reloaded adobe reader....still cannot print adobe page...kick out for address?

I cannot understand a word of what you are writing; can you explain that a little bit more clearly?

Page cannot be displayed error in Jdev 10.1.2

I am new to jdeveloper and have just installed oracle8i and jdev 10.1.2. on my home pc.Also i have a broadband internet connection. When i am connected to the network my project runs but when i switch off the internet then i get an error saying page cannot be displayed becoz it still tries to access my internet IP.Is there any way i can change the target URL point my local PC?

If you are just starting out with JDeveloper - start with the latest version 10.1.3 not with an olde version.
To fix your problem change the URL in the browser to have 127.0.0.1 instead of the computer name: http://127.0.0.1
You can change this also under the tools->embedded OC4J preferences.

Confirmation of a formula in work center in the confirmation

Hi All,
          I want a result of a formula of work center of particular operation in confirmation. Can any body guide the steps

Hi Vachanala,
                       1. You create a standard value parameter in OP7B which is to be used in the formula.
                       2. Your standard value key created through OP19 should be containing this parameter which you have created and this key should be assigned in the basic data in the work center. Check generate box before saving the SVK.
                       3. You define the formula which uses this parameter through OP21. You should check allowed for calculation box.
                       4. In the costing tab of work center you maintain the formula against this parameter. If you want to cost it In that case and should also maintain an activity through KL01 and maintain a price for it through KP26. This activity should also then be maintained against the parameter in the costing tab of work center. Also check the reference indicator against the parameter.
                       5. Assign this work center to the operation in routing.
                       6. Create order, release and do confirmation, if you click actual data system should propose you the quantity as per calculation. Cost will be calculated if you maintained as per point 4, in the planned cost against the order.
                           Please check and revert.
Regards
Sm.

Not able to browse to the CRS Administration URL and "Page Cannot be Displayed error appears"

I have installed IPCCX 7.0 in VMware
I have finished the installation without any error.But after installation when I tried to open the Admin page from
Start > Programs > Cisco Unified CCX Administrator > Application Administration
Getting error message "Page Cannot be displayed".
From troubleShooting Guide found that these services should be running
Check that the CRSJavaAdmin.exe is running (in Windows Task Manager).
World Wide Web Publishing service.IIS Admin service
Can anyone tell me How to run CRSJavaAdmin.exe ??
Thanks in advance.
Reena

Hi RAdha,
CRSJavaAdmin.exe is controlled by UCCX node manage servicer, Can you go to the serviceability tool (start - programs - Cisco unified CCX administrator - Cisco Unified CCX serviceability ) and in process ACtivation tab make sure all the services aren enabled specialy "cisco unified CCX administrator" if not enable it and restart the node manager service from the services menu
Hope this helps
Thank you
Anuj

"Page cannot be displayed" error when attempting to download large dataset.

In the following code, can anybody please tell me at what point the data actually starts to get transferred and the popup "download file" box appears? I'm thinking that the dialog box should appear on the first outputstream.write and start transferring data. However, I think it's not transferring the data until the while loop has finished! That's bad because this is a real long process and I eventually get "Page cannot be displayed" error. On a smaller dataset (shorter while loop) everything seems to work correctly. Is there some sort of a web server configuration that tells it to write out the data ONLY if outputstream closes? I really need it to write out the data as it's coming in. Code is below and thanks in advance.
response.setHeader("Expires", "0");
response.setHeader("Content-disposition","inline;filename=Download.csv");
response.setContentType("application/x-msdownload");
outputStream = response.getOutputStream();
bufferInBytes = this.getData();
while (bufferInBytes != null)
outputStream.write(bufferInBytes, 0, bufferInBytes.length);
outputStream.flush();
bufferInBytes = this.getData();
outputStream.close();

Hi All,
Thanks for all your help.
Seems I already found out the issue.
Since we are using "Personal Home Page" for the system profile option "Self Service Personal Home Page Mode" I checked oracle note and found out
that 11i did not support this mode. Maybe this is the problem that is why we are getting page cannot be displayed error when only 1 responsibility is active.
The way to fix this, is to use mode 'Framework Only' instead of 'Personal Home Page' as Oracle are phasing out mod_plsql based UI and it will not be present in future releases. No maintenance is being performed (i.e. bug fixes) to the mod_plsql based UI technology.
Please check this note for more clearer explanation:
Is The 'Personal Home Page' Mode Supported In Oracle 11i Applications? [ID 368628.1]
Again, thank you for your help!

Error while executing WAD: " Page cannot be displayed"

Hi All,
I am facing an error while i am executing the WAD template.As soon i execute the template it gives an error as " Page Cannot Be Displayed".
I have just used one table in my template.
Is this some setting issue??
Please give your valuable inputs.
Regards,
Kshitij Mathur-

Kshitij,
Check out the serivces are activated or not?
U can check this Tcode SICF
Select Default host->sap->bw right clik and check if its in deactive mode then activate it and save.
Hope it helps.
Urs,
Rakesh.

In the Graphic Tab and Work Center Error The Page Cannot be displayed

Similar Messages

Maybe you are looking for