In the middle of a clip, the audio starts playing from another part.... Help?

So, I'm a bit of a technological noob, so I will describe this the best I can. I have a clip (mp4) that runs about 1 hour 30 min long. About 30 minutes into the clip, the audio from the beginning of the clip randomly starts playing, yet the video continues as it should, just the audio randomly swapped itself somehow?
I have not cut or edited the clip in any way, I simply imported it in, and put it on the timeline and no matter what I tried (restarting, clearing cache, reimporting, etc) nothing seems to fix the problem. The weirder part is, if I watch the raw file using something like Windows Media Player, the clip is just fine, no problems at all. So something must be going wrong when it's imported into Adobe Premiere.
Has anyone had this issue or know what may be causing this? I'm at a loss and it's keeping me from continuing a series I'm working on that I need to release.
As I said before, I'm a bit noobish, and this is my first time posting, so please feel free to respond with any additional info you need me to supply, and try to explain things in a noob friendly way, as I may not understand super technical jargon.
Edit: A little bit of info to help possibly... I'm using Windows 7 and Adobe Premiere Pro CS6

Hmmm okay. I've been using PP for 2 years now with the same type of "non-camera media" and never had a problem til now. But since then I've edited hours and hours of similar footage with no problem, so I may just suck it up and use something like Windows Movie Maker to edit the one clip that is messing up. Thanks for the help, and if anyone else has other suggestions, please feel free to post them

Similar Messages

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help!

I've upgraded to OS 10.8.2 and my Bowers and Wilkins MM-1 Speakers were working fine until today, and now they won't play any sound at all, even though iTunes shows the audio is playing. I've tried both the headphone jack and the USB port. Please help! I don't want to have to be stuck using my internal speakers!
Thank you,
Chris

Michael,
Thanks. I haven't mixed down the audio or checked the number of tracks in Prefs. Good points.
As far as a mixdown goes, I'll definitely give it a try, though I wonder whether or not the tracks will be recognized during mix down recording - given that you can't hear either of those segments in playback. Just have to try.
Re the preferred number of allowed tracks - I'll go check as soon as I send this off, but I'm not sure that applies in this case, since the two Channels containing the segments that are pinked out are not in additional tracks. I should have mentioned that other audio clips and segments on the same Channels in the SAME tracks ARE heard in playback. As are two additional track in the 2nd Sequence. It's only when the two sequences are joined that the pink tinted segments can't be heard. Within the sequence the same audio cuts playback as they should. Thanks again &
Best regards,
David

I am importing a video and in iMovie the video is now white. the audio still plays and I can play the video properly outside of iMovie so any help is good?

I am importing a video and in iMovie the video is now white. the audio still plays and I can play the video properly outside of iMovie so any help is good?

I going to recommend again, downloading and installing some video helper applications.
1. http://perian.org/ (this will add a number of different file types to the ones QuickTime already plays)
2. http://www.divx.com/en/software/mac (will add more file types to what QuickTime can play)
Either one of these might be necessary to get MPEG Streamclip to export the video. Failing that the only other thing I have found is an obscurve discussion thread on Avid.com:
http://duc.avid.com/archive/index.php/t-277791.html
I've figured out what the problem is on my end. The video came from Avid on a Windows machine and was encoded with Squeeze. I found out that the 2 seconds of black at the top of the video were at a different frame rate than the rest of the video. I chopped off the 2 seconds of black and started at the first frame of video, exported it with Quicktime Pro and was able successfully view the video in ProTools. Apparently Squeeze will let you create a movie file that has different frame rates within the same movie... This fixed my issue that was exactly as you describe, hopefully it might work for you.
Lastly, you could try converting the video clip using HandBrake

How to make the audio track independent from the video track?

Can someone remind me how to make the audio track independent from the video track? My memory just went blank. Must be the age.
Thanks

Hi -
Select the clip in the timeline.
Type Command + L or go to the menu Modify > Link to toggle it off.
MtD

Start playing from the middle of a playlist?

Hi all,
I was wondering how to start playing from an arbitray song in a playlist on iTunes. When you go to a playlist, you see a play button next to the title of the playlist on the upper left corner of the playlist pane. If you press it, iTunes starts from the first song of the playlist. What do you do when you want to start from a song in the middle and continue to play songs in the order of the playlist?
I selected the song from which I want to start and pressed the play button on the upper-left corner, but iTunes started to play from the top of the list. When I double-clicked on the song, iTunes started to play the song but it stopped at the end of the album, not at the end of the playlist.
iTunes 11.1.3 (8).
Regards,
Ryo

Oh hi... seemed like I've got the problem fixed. :") For this particular case, just get the server side to stream the video to the clients (possibly one instance is created for each IP address, if resources allow). The server can quickly seek to any particular position within the media clip, and start streaming from there. The clients' players just need to listen to the stream from the appropriate instance on the server.
JMF can do the streaming just fine. I've switched to VLC before I knew that, so now I'm having problem making the JMF on the client work with the VLC streaming. This is weird, considering the streaming protocol to be identical. But I should get that fixed soon.
Thanks anyway! Hope this helps someone.

HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

After installing windows 7 on my hp pavilion dv4000, the audio and vga caase to work. help me

after installing windows 7 on my hp pavilion dv4000, the audio and vga case to work. help me with a recommended sound and audio drivers for windows 7 operational system. Please
This question was solved.
View Solution.

Hi:
Please click on the devices in the device manager. Then click on the details tab. In the properties drop down list, select the second item (Hardware ID's). Post the top string of characters you see for each device.
Those will identify the model devices you have and I can try and find the drivers for them. Is it Windows 7 32 or 64 bit you have installed?
Paul

HT204370 What do I do if the audio is off from the picture, during the movie that I downloaded from Itunes?

What do I do if the audio is off from the picture, during the movie that I downloaded from Itune

Depending upon what country that you are in (films can't be re-downloaded in all countries) then try deleting the film from your iTunes library and redownload it via the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes.
If you aren't in a country where you can re-download films or if it re-downloads with the same problem then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

The audio is played through the tv, but the picture plays the first still shot of the moment it is connected then says a message saying "we're sorry" then something about the network provider.

The audio is played through the tv, but the picture plays the first still shot of the moment it is connected then says a message saying "we're sorry" then something about the network provider.

Welcome to the Apple Community.
Please provide a little more detail, such as what you are trying to do when this occurs and exactly what the message says.

VoIP Phone Call from mobile to PC - Streaming the audio and playing it back

In short:
How can I stream the audio captured from a mobile to PC and play it back.
In brief:
I am trying to develope an application to chat(voice) between a J2ME program and a Java program which is running in a PC.
Currently I am able to send and receive the text message by using SIP protocol after establishing session by using SIP protocol.
As a next step, I want to capture the audio and play back in PC and Mobile.
Now, I am able to capture audio from the microphone of the mobile.
Player p =Manager.createPlayer("capture://audio?rate=8000&bits=8&Channels=1");
                p.realize();
                // get the RecordControl over this Player
                RecordControl rc = (RecordControl)p.getControl("RecordControl");
                // create an OutputStream which the RecordControl will use
                // to write write the recorded data.
                ByteArrayOutputStream output = new ByteArrayOutputStream();
                rc.setRecordStream(output);
                // start the recording
                rc.startRecord();
                p.start();How can I stream it to PC and play it back? Also, I need to send audio captured from PC to mobile and have to play it back.
Pl. do reply.

now I am able to play the stream (with some delay),
while(inputStream.read(buf)!=-1) {
                    try {
                        ByteArrayInputStream recordedInputStream = new ByteArrayInputStream(buf);
                        play2 = Manager.createPlayer(recordedInputStream, "audio/x-wav");
                        System.out.println("Playback player created...");
                        play2.prefetch();
                        System.out.println("Playback player prefetched...");
                        play2.realize();
                        System.out.println("Playback player realized...");
                        play2.start();
                        System.out.println("Playback player started...");
                    } catch (MediaException ex) {
                        ex.printStackTrace();
                    } catch(Exception e) {
                        e.printStackTrace();
                    }But, the problem is , I have to play the audio, as well as capture the audio to create the duplex communication.
Is it possible to do the audio capture and playback simultaneously? If it is not possible, pl suggest an idea to achieve this.
null

The next screen's audio starts playing when the current screens audio has finished

So I've added audio to a few screens and on the first couple it works fine. I have added a mute button and that's all, I just want the audio to play to the end then stop on each screen. It does that perfectly on the first few screens and then at a certain point, when the audio for that screen has finished, it plays the audio for the next screen, and the next, and so on even though I haven't moved on. I can't work out why it's doing this! Sure someone can explain what I've done wrong. Using Captivate 8.0.1...

I adjusted them on one screen and it worked - you've solved my problem again - Thank you!
Is there a way I can make my audio files load up like this automatically?

How do I use cookies to control which part of the timeline to play from?

Hi there,
I have created an animation with Adobe Edge. My site uses Concrete5 and I am pulling in the Edge content into an IFRAME on my home page (there my be a better way to do this and I'm open to suggestions). I want the animation to play from the start when someone first visits the site, but if during their browser session they navigate back to the home page, I want the animation to only play a shorter segment of frames near the end.
My question is, how do I use cookies to acheive this? I'm new to javascript/jquery.
I've included the following code on compositionReady, (found in another post on this forum) but don't have a clue how to continue...
// insert code to be run when the composition is fully loaded here yepnope( { nope:[ '/js/jquery.cookie.js' ], complete: init } ); function init() { //create your cookie's initial values here }
My temp site is here - http://79.170.40.43/nutcrackerdesign.co.uk/
On revisting the homepage, I only want to play from when the green 'How can we help?' button drops in.
Many thanks!
Russ

Hi, Russ-
I found this article, which seemed really helpful in describing how cookies work in JavaScript:
http://www.quirksmode.org/js/cookies.html
Remember that JS works just fine within Animate, so on your compositionReady, you can read your cookie and then set the play based on that. You should probably uncheck the autoplay for your Stage and control the play of your Stage from the compositionReady.
Good luck!
-Elaine

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

When i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place

when i play back an mp3 dj mix i,ve burn,t to cd in my car when i turn the engine of and then restart the car the cd starts back from the beginning how do i solve this problem so that when i turn the engine on end off the cd plays from the same place it did before i turned the engine off

It could be that the CD player will only playback "Redbook" CD's from the previous position.
And starts mp3 type CD's from the beginnig.
However.. it's not Logic related.
pancenter-

In the middle of a clip, the audio starts playing from another part.... Help?

Similar Messages

Maybe you are looking for