In the middle of updating the database, everything died...
I was launching A3 after the upgrade from 2.0 installation and the database update was going on. Then it hung at 3% and everything just froze.
I had to force a restart.
Then when I tried to start A3 again, I got the following error message "There was an error opening the database for the library “~/Pictures/Aperture Library.aplibrary”. "
Please help ASAP!!! I need all of this info!
I did try that and it allowed me to try again. BUT, I started the process over and let it start to run overnight. I just woke up to see how far the system had progressed and the computer would not respond to anything at all. The screen had dimmed, but it wasn't in sleep mode (I disabled that before). I pressed the space bar. I clicked the mouse. Nothing. I tried to press the power button on the back of the iMac briefly...nothing.
I had to hold the power button down to shut down the computer and then restart. Now I'm back to square one!
What on Earth is going on?
Similar Messages
-
hi, updated my iphone where in the middle of updated the screen showed i must connect to itunes. after connecting to itunes my iphone was updated but everything was deleted. was first time on itunes , so have no backup. can i recover my pics and contacts? please help
If this has happened more than once the problem is likely on your PC.
See here: http://www.apple.com/support/iphone/assistant/itunes/ -
Hi! I'm in the middle of updating the softwear and its not moved and it's been over half an hour. Will it load as I need it for work! Please help!
hold down the home/sleep button together until you see the apple logo and then releaswe.
-
My Iphone4S was in the middle of updating its latest software then suddenly it switched off, it hasnt turned on since and I've tried to reset it but only the apple sign appears then the plug into ittnes symbol. I've tried to plug it into itunes but it says my phone is on repair mode which is why it needs to be restored first in order to connect to itunes. I have also then tried to restore it but the error sign appears.
http://support.apple.com/kb/HT1808
-
my iphone 5 screen has gone black in the middle of updating a app. i have tried to back it up using itunes and restore it however it will not restore my phone as i have got the app find my iphone switched on. i cannot turn it off as the screen is black. can anyone help me please??
christobell86 wrote:
... it will not restore my phone as i have got the app find my iphone switched on.
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702 -
I was in the middle of updated iOS7 onto my 4s then it crashed, tried to restore and backup and it wont power off restart it just shows a black screen.
Tried the tips
Does not recognise my phone as I updated Itunes to see if this would work and I have lost all my back ups and every thing,
when i try the power on butter and the home button I get the apple icon, then it shows power cord and itunes logo and then returns to a black screen, I can hear it beeping like when you put it on the charge each time this happens on my PC.
please can anyone else help me???Unable to Update or Restore..?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Take your time... Pay particular attention to Steps 3 and 4
Note:
Some users have reported as many as 8 or 9 attempts were necessary before success. -
Ok. so I updated to iOS 5. Downloaded it from iTunes and all. But in the middle of installing the iOS, i fell asleep. not knowing my computer was at a low battery charge my computer shut down. I did a DFU already and it worked but i'm not sure if it the os is complete. Is It??
Restore to factory settings. That will use the latest iOS and then restore from a backup.
Never, never, never attempt an update/upgrade on any portable computer device without plugging it into its AC charger. -
so i was updating my ipod touch (4g) to ios 6 and i needed to stop it in the middle of updating. so i held the home button and the lock button at the same time for it to restart. It started turning on with the apple symbol and then the screen went white. I kept trying to do the same thing but it wouldnt work. Eace time i did that the screen was a different color. I was yellow/white at one point, blue at another time and sometimes the color behind the apple symbol. It got really HOT and i just let it die. When it was dead i put it on a charger. once it got charged up it started turning on with the apple symbol. then it turned white again and then restarted without me touching anything. When it restarted it turned the blue again. i took it off the charger immediantly because i didnt want it getting as hot as it was before. ive tried every way i know how to fix it but not putting it in the computer because i dont want it to ruin the computer. Please help because i really dont want to get a new ipod. Ive read a lot about how to fix it here on apple but there all the same answer and it still doesnt work. Please respond ASAP! thank you! i could really use your help right now!
First see if placing the iPod in Recovery Mode will allow a restore.
Next try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
If not successful then time for an appointment at the Genius Bar of an Apple store. You are not alone with this problem. -
I accidently disconnected to cord in the middle of updating software on my iphone4. it now has apple logo and blank loading line below. it will not do anything else. can't even switch off please help
Connect the iPhone to the compter you usually sync with
and use iTunes on that computer to do the restore. -
IPhone 5
I have an app that appeared to need to be updated. I clicked to update three days ago. It has started to update and will not finish. How can I delete the app while its in the middle of updating?Locked on an update can mean a couple of different things. So there are a number of things to try, but start with these.
If you have a "waiting" icon, try tapping on the icon and see if you can pause the update/download. Of it pauses, tap on it again and see if it will resume.
Try holding down on the icon until all of the icons on the screen wiggle. If the X to delete pops up on the waiting/stalled app - tap the X to delete the app. Tao,the home button and the apps will stop wiggling.
You can also try this and see if the downloads will resume. Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
I was in the middle of updating to 7.0.3 and Itunes stopped working. Now my phone is stuck in limbo (apple logo with status bar under) My power button doesnt work (of course) How do I get it back to normal?
I have same issue. I click on the home button and Wake/sleep at the same time for 30 seconds or more and then the phone entered in Recovery mode. It is erasing my content now and installing the update. Let´s see how this ends. I have iCloud, iTunes match, and backups from previos versions, hope I can restore all my content.
Otherwise I´ll go to the Genius Bar to do a checkup.
Good luck!
It did not work the first time... The iPhone4 kept in limbo. Then I did disconnect as suggested above and tried again to enter in Recovery mode. This second time it works. And after restoring the iPhone4 with 7.0.3, it asked me if I want to recover from backup. I did recover from my latest back up and now it is syncing the content. -
My ipad white-screened in the middle of updating ios 5.1...any ideas?
Its been on white screen for a day, its not recognised on iTunes anymore and iTunes says its in recovery mode and that I need to restore. Ive tried the restore 4 times and it doesnt do it, says there is an error....Help!
-
I cancelled my iOS6 update in the middle of updating. now it will not turn on it will either remain black or white on the screen. What do i Do? PLEASE HELP!!
Connect it to iTunes and then put the device in DFU mode by holding the power button and home button for 10 seconds, then release the power button only while still holing the home button.
iTunes will prompt you to restore, try that and it should work.
~Lt. Leviathan -
My laptop died in the middle of updating my iPhone 4 and now my phone is frozen. What do I do?
First try forcing it to shut down: Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds.
If you don't get anywhere, restoring it is the next step:
Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end of the cable connected to your computer's USB port.
Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.
Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector)release the Home button.
If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
Use iTunes to restore the device.
If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links. -
plz help me,after instuling the last software update,the programs and games and everything i have download it can't open!
Have you tried the basics from the manual?
restart, reset, restore.
iPod touch User Guide (For iOS 4.3 Software)
Maybe you are looking for
-
OS 10.4.6 and Extensis X1 problem
I have a new G5 OS 10.4.6 and I loaded Extensis X1 version 11.0.2 on it. But when I try to add/transfer some fonts from the hard drive into Extensis it won't do it. It show the fonts on the right-hand frame, but they are 'shaded' and not bold, so I c
-
Pl/sql boolean expression short circuit behavior and the 10g optimizer
Oracle documents that a PL/SQL IF condition such as IF p OR q will always short circuit if p is TRUE. The documents confirm that this is also true for CASE and for COALESCE and DECODE (although DECODE is not available in PL/SQL). Charles Wetherell, i
-
Set "Contractual User Type" when creating user in AS ABAP
Hello For our productive landscape we use "mySAP ESS" user-types, see "Licence Data" in SU01 or table TUTYP. In IdM 7.1 SP3 I have not seen any option for reading or setting these kind of values. Is there any way to use this parameter in IdM? How? Wi
-
Adobe Flash Player 10 failed to register
Hello, I don't know much about how Adobe Flash Player works or how to fix this issue. I have a XP Pro SP3 and my flash player worked fine when I first installed it. Then one day, I turned on my laptop and let it load and suddenly my flash player woul
-
Possibility of individual V2 postings for depreciation
Dear experts, We have implemented parallel accounting using account method for company code 3DEM. Thus, for depreciation area 10 we have configured it to do a V2 update posting. While posting depreciation, the system generates two accounting document