In the next version, could you let the user decide which websites to allow to redirect?

In the current version (7.0.1), you can only check or uncheck the box that says "Warn me when web sites try to redirect or reload the page" under Tools menu / Options /Advanced / General.
Most of the time this is what I want, but when I go to access my banking - Wells Fargo - it wants to redirect every time I sign in. It would be nice not to have to do this, as I access my online banking every day. This problem could be solved by unchecking the box, I know, but then that would allow EVERY web site to redirect, and I don't want that either. Thank you.

The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
*Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
*http://kb.mozillazine.org/accessibility.blockautorefresh
*http://kb.mozillazine.org/Accessibility_features_of_Firefox

Similar Messages

Why GWt suggest box is not working in the latest versions of Firefox ? It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

Why GWt suggest box is not working in the latest versions of Firefox ?
It was working only in Firefox 3 and not other versions. could you please assist in this regards.,

jbren wrote:
I repeatedly have problems with playback on my STB's. Go thru all the motions, inhouse agent, fix multi room dvr problems. Unplug unit, unplug dvr, etc. etc. etc. The DVR'd show will play on the DVR but not on the STB's. What's up with that?
Sorry to hear the auto fix suggested early did not fix your problem. So we can get more information from you, I have copied your post to our private support board. Please refer all correspondences to there from here on out. You can easily get to the private support one of two ways. In the email you signed up for the forums with, you will receive a link to click on. Make sure you are already signed into the forums before clicking on this link. Another way of getting there is by clicking on your username anywhere you see it in the forums. This brings you to your account profile. Scroll down to the section labeled "My Support Cases" . In there you will see the link to your case.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

I am having problems transefering contacts to my I pod when syncing the message comes back with contact in use by I pod please close and try again, please could you let me know how to close contacts on the pod or is there a setting that is wrong etc,

I am having problems transfering contacts to my I pod when syncing the message comes back with contacts in use by I pod please close and try again, please could you let me know how to close contacts on the pod or is there a setting that is wrong etc, i have restored the device. if i go to contact via settings the screen comes on for about 2 seconds and then goes off - Help

Single click on the Home button. Then double click on the Home button. In the recently used row, touch and hold the Contact app till they start to wiggle and then tap the minus sing by the contacts app.
Also make sure the Contact program on your computer is closed.

HT201320 I have an Apple Ipad. I was having problems receiving and sending emails via my yahoo email account. I deleted the account and then tried to install it but it won't connect to server. Could you let me know what I do please?

I have an Apple Ipad. I was having problems receiving and sending emails via my yahoo email account. I deleted the account and then tried to install it but it won't connect to server. Could you let me know what I do please?

I think you have to turn off Private Browsing.
Tap "Private" on Safari Screen to disable Private Browsing. When top of screen is white, Private Browsing is off.
http://i1224.photobucket.com/albums/ee374/Diavonex/547958b4a8c01ac084dd6649e8386 a0f_zps12fa0cca.jpg

Could you let me know how to enable and use ITS on SAP ECC5 and ECC6

Could you let me know how to enable and use ITS on SAP ECC5 and ECC6

Hello Tina,
please see here
in tree select "Installation and Activation"
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/4f/2e6a52c3cdc44d83169b181a9c62ba/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/b8/2a8d65be7eee4eb66067f8a33d1c8b/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/b8/2a8d65be7eee4eb66067f8a33d1c8b/frameset.htm</a>
best regards

Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file...Now I've got a new iPad and need the User Guide which is only available inPDF

Have been here before but still have not resolved a fix for a black screen when I try to access a PDF file using Safari...Now I've got a new iPad and need the User Guide which is only available in PDF and FireFox will not work.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Error: "The user for which we are checking a privilege should be in the same org as the context provided"

Hi All,
Recently, we've encountered some weird error for some users when trying to assign records to them through both the CRM UI and CRM SDK Call.
The error message saying: "The user for which we are checking a privilege should be in the same org as the context provided".
Here is the trace log for assigning a lead for one of those users (same error for other records):
[2010-08-09 13:58:06.0] Process: w3wp |Organization:d905ae4d-8d9f-df11-a1b0-00237df0351e |Thread: 22 |Category: Exception |User: fb56b107-949f-df11-a1b0-00237df0351e |Level: Error | CrmArgumentException..ctor
at CrmArgumentException..ctor(String message)
at SecurityLibrary.TryCheckPrivilege(Guid user, Guid privilege, ExecutionContext context)
at SecurityLibrary.CheckPrivilege(Guid user, Guid privilege, ExecutionContext context)
at SecurityLibrary.CheckPrivilege(Guid user, EntityMetadata metadata, PrivilegeType type, ExecutionContext context)
at CascadeEngine.AssignDB(BusinessEntityMoniker moniker, SecurityPrincipal assignee, ExecutionContext context)
at RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at LogicalMethodInfo.Invoke(Object target, Object[] values)
at InternalOperationPlugin.Execute(IPluginExecutionContext context)
at PluginStep.Execute(PipelineExecutionContext context)
at Pipeline.Execute(PipelineExecutionContext context)
at MessageProcessor.Execute(PipelineExecutionContext context)
at InternalMessageDispatcher.Execute(PipelineExecutionContext context)
at ExternalMessageDispatcher.Execute(String messageName, Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode, PropertyBag fields, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId)
at RequestBase.Process(Int32 primaryObjectTypeCode, Int32 secondaryObjectTypeCode, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId)
at RequestBase.Process(CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId)
at CrmServiceInternal.Execute(RequestBase request, CorrelationToken correlationToken, CallerOriginToken originToken, UserAuth userAuth, Guid callerId)
at InProcessCrmService.Execute(Object request)
at PlatformCommand.ExecuteInternal()
at AssignRouteOnCreateUpdateListener.AssignEntity(Entity entity, LookupValue owner)
at CommunicationListener.HandlePostEvent(PlatformCommand command, Response response)
at PlatformCommand.ExecuteInternal()
at UpdateCommand.Execute()
at EntityProxy.Update(Boolean performDuplicateCheck)
at AppForm.HandleFormEventAssign(Boolean gridRefreshCallbackAdded)
at AppForm.RaiseDataEvent(FormEventId eventId)
at EndUserForm.Initialize(Entity entity)
at CustomizableForm.Execute(Entity entity, String formType)
at LeadDetailPage.ConfigureForm()
at AppUIPage.OnPreRender(EventArgs e)
at Control.PreRenderRecursiveInternal()
at Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
at Page.ProcessRequest()
at Page.ProcessRequest(HttpContext context)
at sfa_leads_edit_aspx.ProcessRequest(HttpContext context)
at CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at ApplicationStepManager.ResumeSteps(Exception error)
at HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr)
at ISAPIRuntime.ProcessRequest(IntPtr ecb, Int32 iWRType)
>Crm Exception: Message: The user for which we are checking a privilege should be in the same org as the context provided, ErrorCode: -2147220989, InnerException: System.ArgumentException: The user for which we are checking a privilege should be in the same
org as the context provided
I checked the user id and the organization id, and there are both correct (in the database). The user id "fb56b107-949f-df11-a1b0-00237df0351e " is actually the internal CRM System User.
What could the issue be?
Can anyone help, please. Thanks

Are you sure, the User which you are assigning is in the same organisaion. It seems that the Orgname which you are specifying is not correct. and the web service is pointing to other user which is not the current ms crm organisaion.
Could you please paste your code here for more details.?
Thanks, Ranjitsingh R | http://mscrm-developer.blogspot.com/ | MS CRM Consultant

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

How do I see the users/roles which have quota access to a Tablespace?

How do I see the users/roles which have quota access to a Tablespace?
Thanks

Thank you very much.
select username from dba_ts_quotas where tablespace_name='&tablespacename';
did the job!
regards

How to override the onTouchUp in the user control which can be used to fire the event not only on this user control, but whole application

I am a new to the C# and WPF. Right now, I want to override onTouchUp event in my user control. Then I can add user control in
the references for reuse. The problem is each time I want to test this event on the application, the event only fire at area of user control, not whole screen. Anyone has solution for this?

You cannot just add a UserControl to a window and expect its OnTouchUp method to get invoked when a TouchUp event occurs outside of the user control. That is not how routed events work.
The OnTouchUp method of the UserControl will only be invoked when a TouchUp event occurs from within the UserControl.
The event will indeed bubble up to the parent elements of the UserControl and you could for example handle the event in the parent window:
<Window x:Class="WpfApplicationSlider.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="MainWindow" Height="350" Width="525" TouchUp="Window_TouchUp">
The OnTouchUp method of the UserControl will however never get invoked when you touch an element outside of the UserControl because an event only travels between the source element and the handler(s). This is how routed events work.
If you want a "global" TouchUp event handler you should override the OnTouchUp of the top-level
window:
public partial class MainWindow : Window
public MainWindow()
InitializeComponent();
protected override void OnTouchUp(TouchEventArgs e)
base.OnTouchUp(e);
//do your thing...
If you want to be able to reuse the functionality across all of your windows in case you have several you could for example create an abstract window class and make all your windows inherit from this one:
namespace WpfApplication1
public abstract class BaseWindow : System.Windows.Window
protected override void OnTouchUp(System.Windows.Input.TouchEventArgs e)
base.OnTouchUp(e);
//do your thing...
MainWindow:
public partial class MainWindow : BaseWindow
public MainWindow()
InitializeComponent();
<local:BaseWindow x:Class="WpfApplicationSlider.MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:local="clr-namespace:WpfApplication1"
Title="MainWindow" Height="350" Width="525">
</local:BaseWindow>
Hope that helps.
Please remember to mark helpful posts as answer to close your threads and please start a new thread if you have a new question.

How does the query decide which Infoprovider to fetch data from

Hi,
Could somebody please explain what steps go on in background to enable the query to decide which Infoproviders it should fetch data from in a multiprovider.Assuming that in the multprovider we have some infocubes that are logically partitioned by Fiscal Year and other cubes that are not.
Thanks VK..

Does the RRKMULTIPROVHINT technique work in case of a multiprovider that is not homogenous... Also in case there are 5 infocubes, does the select query run on fact table of all infocubes or are select queries run initially on the dimension tables and based upon which infocube has the required data for the query the fact table is queried..
Thanks

Solaris: How do I specify the user under which the WLS runs?

I just upgraded from WLS 5 to 8. OS is Solaris 8.
Configuration is one single admin server which also acts as the only managed server.
The admin server must start up as root so that the users don't have to specify the port :443 at the URL (don't ask me why, but it seems to be the fact on Solaris).
After starting, I want the server java process to actually run as another user than root. How to I do this?
It worked on the old Solaris server with WLS 5.1, and I have an idea that it had something to do with the command line option -Dweblogic.system.user=. That option has no effect when trying it with WLS 8.1.
This must be a common task when running WLS on Solaris. But I cannot figure it out, and a thousand users are waiting for the application to start up. Can anyone tell me how to do this?
Regards,
Anders.

If you logged in as userx and started server, the weblogic server process will be started as userx.
If you want usery to start server, then you need to give permissions accordingly, though you have installed the weblogic as root.
-Dweblogic.system.user=, option works only when this user has rwx permissions to various files under weblogic dir (log files, applications, .....).
Regards
Sree

Can i know the user exits which should trigger while saving billing docu

hi,
please can u help me to find out user exits which should trigger while saving billing documents.

A couple years ago I downloaded this program, I think from SAPFANS. I don't take any credit for it...Not sure who originally wrote it. Just type in the t-code and hit execute.
*& Report name          : Identify and Drill-Down to SAP User Exits.   *
*& Program name         : ZZ_FIND_USER_EXITS                           *
REPORT ZZ_FIND_USER_EXITS
NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65
MESSAGE-ID MM.
D A T A   D E F I N I T I O N                                        *
TABLES : TSTC,      " SAP Transaction Codes
         TADIR,     " Directory of Repository Objects
         MODSAPT,   " SAP Enhancements - Short Texts
         MODACT,    " Modifications
         TRDIR,     " System Table TRDIR
         TFDIR,     " Function Module
         ENLFDIR,   " Additional Attributes for Function Modules
         TSTCT.     " Transaction Code Texts
S E L E C T I O N   S C R E E N                                      *
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
I N T E R N A L   S T R U C T U R E S   &   T A B L E S              *
DATA : GT_TADIR LIKE TADIR OCCURS 0 WITH HEADER LINE.
V A R I A B L E S                                                    *
DATA :
       GV_FIELD1(30) TYPE C,
       GV_DEVCLASS    LIKE TADIR-DEVCLASS.
C O N S T A N T S                                                    *
CONSTANTS:
           GC_F     LIKE TRDIR-SUBC   VALUE 'F',
           GC_R3TR LIKE TADIR-PGMID VALUE 'R3TR',
           GC_FUGR LIKE TADIR-OBJECT VALUE 'FUGR',
           GC_SMOD LIKE TADIR-OBJECT VALUE 'SMOD',
           GC_PROG LIKE TADIR-OBJECT VALUE 'PROG'.
R A N G E S                                                          *
RANGES:
GR_VKORK      FOR WKBP-VKORG.
E V E N T   P R O C E S S I N G                                      *
INITIALIZATION.
AT SELECTION-SCREEN.
SELECT SINGLE PGMNA
    INTO TSTC-PGMNA
    FROM TSTC
    WHERE TCODE = P_TCODE.
IF SY-SUBRC <> 0.
    MESSAGE E899(MM)
      WITH TEXT-E01    " Input Transaction Code is Invalid.
           TEXT-E02.   " Please Correct !!
ENDIF.
SELECT SINGLE TTEXT
    INTO TSTCT-TTEXT
    FROM TSTCT
    WHERE SPRSL = SY-LANGU
      AND TCODE = P_TCODE.
START-OF-SELECTION.
CLEAR GV_DEVCLASS.
SELECT SINGLE DEVCLASS
    INTO GV_DEVCLASS
    FROM TADIR
    WHERE PGMID = GC_R3TR
      AND OBJECT = GC_PROG
      AND OBJ_NAME = TSTC-PGMNA.
IF SY-SUBRC <> 0.
    SELECT SINGLE SUBC
      INTO TRDIR-SUBC
      FROM TRDIR
      WHERE NAME = TSTC-PGMNA.
    IF TRDIR-SUBC = GC_F.         " Function Group
      SELECT SINGLE FUNCNAME
        INTO TFDIR-FUNCNAME
        FROM TFDIR
        WHERE PNAME = TSTC-PGMNA.
      SELECT SINGLE AREA
        INTO ENLFDIR-AREA
        FROM ENLFDIR
        WHERE FUNCNAME = TFDIR-FUNCNAME.
      CLEAR GV_DEVCLASS.
      SELECT SINGLE DEVCLASS
        INTO GV_DEVCLASS
        FROM TADIR
        WHERE PGMID    = GC_R3TR
          AND OBJECT   = GC_FUGR
          AND OBJ_NAME = ENLFDIR-AREA.
    ENDIF.
ENDIF.
SELECT *
    FROM TADIR
    INTO TABLE GT_TADIR
    WHERE PGMID = GC_R3TR
      AND OBJECT = GC_SMOD
      AND DEVCLASS = GV_DEVCLASS.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
          20(20) P_TCODE,
          45(36) TSTCT-TTEXT.
SKIP.
IF NOT GT_TADIR[] IS INITIAL.
    WRITE:/(95) SY-ULINE.
    FORMAT COLOR COL_HEADING INTENSIFIED ON.
    WRITE:/1 SY-VLINE,
           2 'Exit Name',
          21 SY-VLINE ,
          24 'Description',
          95 SY-VLINE.
    WRITE:/(95) SY-ULINE.
    SORT GT_TADIR BY OBJ_NAME.
    LOOP AT GT_TADIR.
      SELECT SINGLE MODTEXT
        INTO MODSAPT-MODTEXT
        FROM MODSAPT
        WHERE SPRSL = SY-LANGU
          AND NAME = GT_TADIR-OBJ_NAME.
      FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
      WRITE:/01 SY-VLINE,
             02 GT_TADIR-OBJ_NAME HOTSPOT ON,
             21 SY-VLINE,
             22 MODSAPT-MODTEXT,
             95 SY-VLINE.
    ENDLOOP.
    WRITE:/(95) SY-ULINE.
    DESCRIBE TABLE GT_TADIR.
    SKIP.
    FORMAT COLOR COL_TOTAL INTENSIFIED ON.
    WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'No User Exit exists'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD GV_FIELD1.
IF GV_FIELD1(8) = 'GT_TADIR'.
    SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
    CALL TRANSACTION 'SMOD' AND SKIP FIRST   SCREEN.
ELSE.
    MESSAGE I899(MM)
      WITH TEXT-I01    " Click on the Exit Name to Drill-Down
           TEXT-I02.   " to SAP Enhancement Information.
ENDIF.
END-OF-SELECTION.
TOP-OF-PAGE.
S U B R O U T I N E S                                                *
E N D   O F   R E P O R T ****************************************

Why won't you let PC users view HDV?

I'm a film student in New York who can't afford to buy a Macbook Pro when I've had the same PC laptop for so many years. I've been given an assignment that requires me to shoot on HDV, and I spent the time and money on HDV tapes and filming this shoot using HD cameras. Our lab (with very strict openings with only 2 HDV decks) uses Final Cut Pro - so I spent my time logging and capturing about 8 tapes of footage.
So I went home and went through the trouble of getting the Mac data system to communicate with my PC data system so my hard drive would even let me see that I HAD the footage - now that I finally do, I see that only my DV footage works! (one tape)
Now, I know you'll tell me to export it in H.264, but I simply do not have the time now nor would I have had the time to do so in the short hours of lab availability - not to mention it's something I wouldn't (and didn't) think of since captured DV footage works with no problem!
This is a widespread problem - not all people don't have the luxury of Final Cut Pro and a Macbook Pro. Why can't I edit the footage I shot?
So I ask:
PLEASE MAKE THIS CODEC AVAILABLE (FOR PURCHASE, IF YOU'RE SO INCLINED)
Thanks.

NoveltyMC, try not to get too upset with Kirk. He knows more about QuickTime than probably the rest of us in this forum put together, but I'm pretty sure he's not a video production guy, and he probably misunderstood what you're really doing...
Again, the real question is, what codec is it?
Experimentally, have you tried downloading VLC (http://www.videolan.org) on the Windows side to see if it can handle the HDV material? Internally, HDV is, if I remember correctly, MPEG-2 based, so an MPEG-2 codec ought to be able to handle it, provided that Final Cut did not transcode the file into ProRes or Intermediate.
If you open the file using QuickTime, and do a Get Info on it, what is the listed codec? Is it listed as HDV, or as Intermediate or ProRes?
If VLC can handle the files, then I expect it might be as simple as installing the MPEG-2 component for QuickTime, but I hate to recommend that without knowing for certain that it will actually work.
--Dave Althoff, Jr.

When i try to set a folder, it does not show up on the far left which doesn't allow me to enter any projects in the folder..

In trying to set up a folder, it doesn't appear on the far left but it shows up directly under other projects. Because it doesn't set up on the far left I can't put any projects in the folder.

Currently what I'm doing to set up a folder is go to "new" to create a folder but what I get is a folder that is directly positioned under a symbol such as a project and not out to the left of the other symbols.
Probably you get a folder directly beneath a project, because you have selected that project. But still you should be able to drag the folder to a higher level so that you can move projects into it.
If nothing else helps, switch to "Projects" View (by clicking on the prject icon on top of the Library Inspector) before you select "File -> New -> Folder" . That should create the new Folder at the bottom of your folder list, far to the left, and you should be able to drag projects to it.

In the next version, could you let the user decide which websites to allow to redirect?

Similar Messages

Maybe you are looking for