In the process of installing OS X Maverick on mac mini; got error "Filesystem verify or Repair failed"

Hi,
I am in the process of installing Maverick on my Mac Mini.  I got an error: "Filesystem verify or Repair failed".
Most threads suggest that I either:
1. restart process,
2. install disk and try again,
3. recover disk
Since I am in the middle of installing, I cannot seem to go back to my working OS to restart the process.  Since Maverick is available in the App Store, i cannot use a disk for it.  That leaves me with recovering the disk.  Can anyone suggest how I can do this without destroying all my files on the computer?
Thanks,

Thanks for your advice.
I do have a backup, but I can't access it right now.  I tried the OS X Recovery, but when I try the "Command-R" option, it just goes right back into the install.  I have used the "Command-R" option before, so I know when and how long to hold it for.  I just couldn't get it to not enter the install.  I did manage to at one point get a prompt where it asked me if I wanted to install from Macintosh HD (main partition) or Backup (secondary partition), but I chose Macintosh HD, and it went back into the install.  I couldn't get that option again for whatever reason.
Is there a way I can just start from scratch?  Both Snow Leopard and Mavericks are online only.  Is there a way to pause the install, connect to the internet and install a brand new (wipe out all files - I can always use by backup to restore my important files later) copy of the OS?
Thanks,

Similar Messages

  • TS1367 I have MacOS 10.5.8. It is not booting. It stops at the blue screen. I used the disc utility - verify disc. I get the following message - Invalid sibling link. Volume check failed. Error: Filesystem verify or repair failed. Please give a solution a

    I have MacOS 10.5.8. It is not booting. It stops at the blue screen. I used the disc utility - verify disc. I get the following message - Invalid sibling link. Volume check failed. Error: Filesystem verify or repair failed. Please give a solution anybody?

    Many times I tried to simply update from 10.5.8 without any success. It starts and after few minutes ...
    I used many different install disks (I bought ofiicial release from Mac seller), so I think this is not a problem with wrong version or bad install disk. A few days ago I've got back my computer from Apple  technical support and technician told me he had this same problem with system installation

  • Question about installing Snow Leopard on a Mac Mini

    I'm in the process of installing Snow Leopard on a Mac Mini, but it's taking forever. It's been installing for well over 2 hours now and still indicates an hour left to install. Is this unusual? I'm getting a little concerned. What do I do if I have to cancel the install? Do I have to start from scratch again?

    How about this:
    1. If necessary start up from the external HD & verify that everything is working right & all your files are intact on it.
    2. Clone from the external to internal HD.
    3. Start up from the internal HD & verify as in #1 that everything works as expected.
    4. Install Snow Leopard on the external HD. If that completes successfully, restart from it & verify as above.
    5.a. If that all checks out, clone the external back to the internal HD & you are done.
    5.b. If that fails, you still have the internal HD with your working copy of 10.5.8 to use while you try to figure out what is going wrong.
    The main benefit of this is you always have one working installation to fall back on no matter what happens.

  • Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow which point to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing

    Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow pointing to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing appearing again. what sholud I do?

    This is the solution to your issue.
    I wish you the best of luck. 
    http://support.apple.com/kb/ht1808?locale=en_AU&viewlocale=en_AU

  • I have installed Adobe Lightroom CC.  In the process of launching, a popup appears, that says:  "AN INTERNAL ERROR HAS OCCURRED.  Cannot create the required folder:  /Users/(my user name)/Library/Application Support/Adobe/Lightroom/Develop Presets."  So e

    I have installed Adobe Lightroom CC.  In the process of launching, a popup appears, that says:  "AN INTERNAL ERROR HAS OCCURRED.  Cannot create the required folder:  /Users/(my user name)/Library/Application Support/Adobe/Lightroom/Develop Presets."  So even though Lightroom CC is installed, it will not launch.  What do I need to do to allow it to launch?

    The problem was solved today.  Here's the full story.  I'm a Mac user.  At first I installed Lightroom CC on my iMac (desktop).  I had this problem so I called Adobe, and was referred to a "special unit" .  After about an hour the tech solved it for me ... we did a screen sharing and she took control of my computer for a loooong time.  Because of language difficulties, at first I wondered if she knew what she was doing but she eventually solved it.  Although she couldn't explain exactly what she was doing, she summarized it by saying "it was a permissions problem."  I asked if I would have the same issue later when I installed it on my laptop (Macbook Air).  She said probably not.
    But I did.  The same internal error popup arose on launch and launch did not complete on my laptop.  I tried chat but no joy so I eventually called Apple Care.  I had noticed that on my laptop (and the iMac for that matter), that there was no Library folder after my user name.  The Apple tech explained that the Library folder is actually there but it is hidden because it's very easy for users to do some very nasty things to their computer by going astray while in the Library folder.  The folder is actually there, but they hide it.  I did remember seeing that the tech helping me with my iMac had typed the work "Library" while she was controlling my computer.  Basically she had activated the hidden Library folder so she could open the path that Lightroom was trying to follow to create that "Develop Presets" folder.  For some reason, the inability to create that folder in the launch process was preventing launch from being completed.  The Apple tech said she didn't actually have to do that and activated the Library folder by use of the Go selection on the menu bar.  Anyway, once that complete path was replicated and opened, the next step was to go to the Lightroom Permissions field and add my user name to the user categories already there and enable "read and write" permissions to my user name.  Once done, I shut down my laptop, and then rebooted.  I launched Lightroom and then boom, voila, heavens to betsy, etc. it launched and suddenly a dismal weekend turned into a great one. 
    I am not a geek, so I hope this makes some sense.  I also hope Lightroom launches again tomorrow and beyond! 

  • I have a problem in the process of installing iTunes

    Hello
      I have a problem in the process of installing iTunes and stops in the middle and show me this message
    http://dl.dropbox.com/u/22061660/sads.jpg
    Do any of you has a solution

    From last picture looks like your user is administrator and it should have administation privileges.
    But picture with error message says you doesn't.
    The things I would do:
    1. Reboot or Log out and log in
    2. Try to change location where iTunes will be installed (ex. C:/iTunes)
    3. Try to create test user also with admin priviledges and then try to install on another accaunt.
    That's my thoughts for now...
    Regards,
    Mirek

  • Hi, I have a refurbished upgraded macbook with 320 GB Disk, 4GB Memory and running Lion OS v 10.7.5.  This satisfies the second part of the requirement for installing OS X Mavericks (10.9) but happens to be an early 2008 piece.  Can I somehow install 10.9

    Hi, I have a refurbished upgraded macbook with 320 GB Disk, 4GB Memory and running Lion OS v 10.7.5.  This satisfies the second part of the requirement for installing OS X Mavericks (10.9) but happens to be an early 2008 piece.  Can I somehow install 10.9?  And why is apple not allowing people like me to try out this installation?  Any reason that are too technical that people like me cannot upgrade and handle?
    This would solve many apps to run on this.

    It's mainly the video card. The Models 2,1 through 4,1 have video cards with non-upgradeable 32bit drivers. The model 5,1 Late 2008 and newer have at least the NVIDIA GeForce 9400M with 64bit drivers. Mountain Lion and Mavericks require 64bit native drivers. Mountain Lion and Mavericks no longer support Intel's GMA 950 or GMA X3100 graphics processors.
    While Lion used some 32 bit and a lot of 64 bit code, Mountain Lion and Mavericks are pure 64 bit, which excludes more systems than Lion did. It's not something you can add memory to, for example, as it involves the base architecture.
    http://reviews.cnet.com/8301-13727_7-57470261-263/older-64-bit-macs-out-of-the-p icture-for-mountain-lion/?tag=mncol;txt
      http://reviews.cnet.com/8301-13727_7-57387846-263/will-your-mac-run-mountain-lio n/   

  • I'm in the process of installing ios 7.1 update in my  5s and it took too long. Can i stop its installation?  Great thanks.

    Hello everyone! I'm in the process of installing ios 7.1 update in my  5s and it took too long. Can i stop its installation? Can't open my phone.. what shoudl I do?  to Great thanks.

    Help pls... thank you.

  • I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

    I have acrobat pro on my lap top and recently installed acrobat pro on my Mac Mini, but the text recognition function is not working, does anyone have any advice on how to remedy this problem?

    On my laptop when I open up a pdf file and do a search for a particular
    text phrase it prompts me to run a character analysis.  Whereas on my mac
    mini, when I try to engage the same process it just says it couldn't find
    the phrase and doesn't even try and run a character analysis. I tried
    clicking on the tool bar and the recognize text tab but nothing there seems
    to do anything.
    In trying to figure out the issue on my own I noticed one thing.  I run a
    small law firm in St. Louis and I scan in all my files to which are
    subsequently emailed to my outlook account where I will save them as pdf's
    to their respective folders.  On my laptop when I open up an email from my
    scanner I see the image of a acrobat document next to the attachment
    paperclip symbol.  However, when I open up the same email on my mac mini I
    notice instead of an acrobat file image it shows a Preview file image (the
    program used to open up pdf's before I installed acrobat).
    Hope this helps!
    Sincerely,
    Jonathan McAllister

  • How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way?

    How can I erase the data on my 2009 macbook pro that won't turn on because of a faulty motherboard? Do I just remove the hard drive, install it in a working mac, and erase it that way? Thanks.

    You put the internal drive in an enclosure. If you choose to keep the drive, you don't need to erase it.
    (110687)

  • HT2518 I'm in the process of transferring files fm pc to mac, all connections verified and migration asst is working. HW, my outlook contacts nor email are listed as an option for transfer.  Any1 else have such a plm?  If so, how did you resolve?

    I'm in the process of transferring files fm pc to mac, all connections verified and migration asst is working. HW, my outlook contacts nor email are listed as an option for transfer.  Any1 else have such a plm?  If so, how did you resolve?

    I used O2M from http://www.littlemachines.com to move from Outlook to Apple Mail.
    Richard

  • My iPad keeps showing my inactive email as my apple ID instead of the current email. I have gone through the process of managing my account ....it has all been verified yet I cannot access my updates. What do I do?

    My iPad keeps showing my inactive email as my apple ID instead of the current email. I have gone through the process of managing my account ....it has all been verified yet I cannot access my updates. What do I do?

    - Have you went to Settings>Store and signed out and then signed back in?
    - Did you by chance create a new account? Apps are locked to the account that purchased them and you have to sign into that account to update apps purchased with that account.

  • Hi, since installing mountain lion on my macbook, it wont download pdf files from internet sites, the same problem does not exist on my mac mini, i am using firefox on both macs, please help!

    Hi, since installing mountain lion on my macbook, it wont download pdf files from internet sites, the same problem does not exist on my mac mini, i am using firefox on both macs, please help!

    Back up all data.
    Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
    /Library/Internet Plug-ins
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • 2011 macbook pro OSX maverick, error: storage system verify or repair failed

    Hi there,
    My 2011 Macbook pro which came with Lion but now upgraded to Maverick 10.9.5 has just crashed. It will start up in recovery mode but when I've gone to the apple logo to start up from disk, it shows the disk but doesn't start up from it I just get a grey screen.
    I'ved tried to verify and repair the disk and get message: 'The partition map needs to be repaired because there's a problem with the EFI system partitions file system'
    I also get: error, storage system verify or repair failed.
    S.M.A.R.T staus is verified
    None of the key commands for start up seem to work, ie - option - shift - command P,R etc.
    I can't re-install operating system as it is an older version, ie Lion and have updated to Maverick via APP store so no way of re-installing OSX.
    Any ideas???

    I have the same issue. Not able to fix it.

  • OS X could not be installed on your computer File system verify or repair failed

    Downloaded OS X Yosemite update through Apple Store and attempted to install it on my mom's 2013 21" iMac running OS X 10.9.5.
    However, a few minutes into the process I received this message:
    OS X could not be installed on your computer
    File system verify or repair failed. Quit the installer to restart your computer and try again.
    Tried restarting several times to no avail. Ran disk utility and saw:
    Invalid node structure.
    File system check exit code is 8.
    Error: This disk needs to be repaired.
    Repair disk button not available for Mac HD, but is available for 1TB Apple HDD. Is there any way to abort the OS X Yosemite installation?

    TThe Disk Utility cannot repair the disk it resides on. The way I get around this is to use an external hard disk as my startup disk and run did utility from that. Most time then the primary disk on your iMac can be repaired.

Maybe you are looking for

  • Substitution error

    Dear All We are not able to create new substitution step through T. Code GGB1/OBBH in Dev. 500 / 400. While inserting step, system gives ABAP dump. Same error comes in Dev. 200 also. Please look into this. This has happened due to some updation on 06

  • Read and write data from / to cube in CUSTOM_LOGIC BADI

    Here are the details: BPC displays a set of details - with 5 rows and 5 columns. There are 50 additional rows for the 5 columns which are blank to start with. User changes a cell. BPC 10 only sends that cell which is changed by the user in CUSTOM_LOG

  • Create Widget Test Reports.vi

    Someone please Help!! Please see the attached file. Download that file and see how it works. I am developing an application similar to the same example,however, I want to append more data to the word document. Also, I want to format it the same way a

  • OU Group Policy over-riding User Group Policy

    I'm using ZfD 4.01 ir7 and have a restrictive Group Policy applied at the OU level. I've created a less restrictive Group Policy and assigned it to a user within the above mentioned OU but the settings are not taking...the OU Group Policy is over-rid

  • Won't remember media folder on NAS

    Greetings, I moved my iTunes to my NAS without issue, but one has shown up... Each time I reboot my iMac, iTunes cannot find the library and I go through the procedure of choosing another library....wherein I get it connected to iTunes library folder