In the Production Order, Sales Quotation is displayed not the Sales Order

Hello to All,
I need a kind help from you.
My scenario is as follows
There is a Configurable Material (Finished Product)
Sales quotation (VA21/2/3) were made for this material.
Sales Order (VA01/2/3) with reference from the Sales Quotation were made for this same material.
Now when I run the MRP (MD02) for this material, Planned Orders were created.
Planned orders were converted to the Production Order.
In the Production Order (say in Display mode), under the 'General' tab, there is a segment called 'Sales order'. In this segment, the sales order is being displayed if the Production Order is created for a sales order (MTO scenario).
But, in my case, the Sales Quotation number is being displayed instead of the Sales order.
My Issue which need your answers:
Is it a standard SAP scenario?? I mean, if the production order is created for a sales order and again if the sales order is created earlier with reference to a sales quotation, then in the production order, the Sales quotation is displayed. Is it a standard?? Or it is showing wrongly? I mean, is it like that, always the sales order should be displayed in the Production order and not the sales quotation??
Please suggest so that I can overcome this problem, if at all it is a problem.
Some More Inputs (For your analysis/research):
1. After the MRP run of the material the Planned Order is created. I have checked the planned order, and found tha the assignment of sales document (in this case Quotation) is done in the Planned order itslef. It is visible wthin the "Assigmnet" tab of the Planned Order.
2. For the analysis purpose, I created one stand-alone Sales Order for the same material. I mean, without reference from any Sales Quotation. Then, when I run the MRP (md02), the Planned Order and then production order were created normally, with reference to the Sales order. This just for your kind information.
3. I have checked the pegged requirement of the Production order in the MD04. It is showing the Sales order itself. But, if I see the production order (CO02/O03), it shows sales quotation.
User Requirement:
Evenif, the sales order is created with reference to a Sales Quotation, after MRP run, in the Planned and thereby subsequent production order, the Sales Order should display and not the Sales quotation.
Please suggest.
Thanks and Regards,
Supriyo

Hi
Since your scenario is configurable material, the system takes the reference of sales quotation only. Because the in case of configurable materials the sales quotation is the base and based on the sales quotation the sales order is created and subsequent production order.
This is std SAP and for configurable materials the sales quotation is deciding factor
Krishna

Similar Messages

My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young

Is it possible to change the number of weeks to be displayed in the month view in calendar (mavericks)?

I'd like to know if it's possible to change the number of weeks to be displayed in the month view in calendar? Thanks!

No.
There are up to six calendar weeks that might be used to display the 31 possible days in a month.
So the month view displays six weeks.

I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be

I have a Windows copy of Photoshop Elements 11, but the serial number has been lost. I didn't buy the product and I am unable to find the box. As far as I know, it's never been used so has not been registered. Does anyone know how the serial number can be recovered under these circumstances?

If you never bought the product then you cannot get the serial number.

Why does moving the mouse over an IMAQ image display slow the GUI down so much?

I have a large application with several vi's running simultaneously under labview 8.6.1. When I mouse over an image display control in one of the vi's, everything slows down a shocking amount in all the other vi's. The windows task manager does not show a large increase in CPU use. My pc is has a quad cpu with 4GB of RAM, and the CPU and memory loads do not appear to be terribly taxing to the system. However, many of my vi's apparently come almost to a standstill if I just move the mouse in a circle around my image control.
This looks like it is largely a GUI display issue. If I make a new vi and put a while loop in it that only displays the iteration loop number to an indicator, I can see the iterating occurring, then stopping totally when I mouse inside the image display control. When I stop moving the mouse inside the control, or when I move it outside the control, the interation loop number jumps up, as if it had been incrementing behind the scenes the whole time. So only display of the interating was halted.
This problem occurs even if the vi with the image control is not executing. If the vi with the image control is open but not running, and I mouse over the image on it, the other guis all come to a screeching halt.
Does mousing in the image display control really utterly crush all other guis in all other labview windows? Is this an issue inherent to the image display control? If so, is there anything I can do about this?
Also, this issue is not entirely limited to display. I started looking at it in greater detail because this issue also exposed what I think is a race condition in my code. I have a vi that acquires an image from a ccd and puts it into an IMAQ image.ctl. This image then gets passed up to a vi up the call chain, and is put on a queue and sent over to be de-queued by a vi that has the image display control. Here's the kicker: when I mouse over the image display control, the image successfully gets acquired inside the subvi, and if I probe the wire leading to the output IMAQ image display.ctl, I see the image. If I simultaneously probe the wire coming out of the subvi one level up the call chain, the image gets lost about half the time. This only happens if I am mousing in the image display control IN A TOTALLY DIFFERENT AND SEPARATE VI. If I bump up the priority of the ccd image acquisition vi to 'highest priority', the problem only happens about 1% of the time, and I really have to mouse around to make it happen. Still, it's disturbing that mousing in the GUI in one window results in a failure of a separate subvi to simply pass an image up the call chain. I understand that IMAQ images are referenced rather than passed by value, but I don't see why there should be a failure to pass the image up the call chain. I've looked for a race condition, but can't find one.
Eric

I have finally been able to replicate the behavior that you are seeing on another computer once the image was large enough. Here are a few notes about this behavior:
First. The UI only slows down when the images are large, 16 bit images. The reason why this is unique to 16 bit images is that they can only be displayed on the front panel as 8 bit images. The workaround that Weiyuan suggested to change the 16 bit display mapping hints towards the root of the problem...that any time a mouse runs over the indicator, Windows asks the entire image to re-draw (having a separate indicator overlapping the image will create the same behavior). With a 16 bit image, not only does the image have to re-draw on the screen but the 16 bit pixels need to be mapped to 8 bits. When setting the 16 bit display mapping to Full Dynamic, this requires mor computation/pixel than 90% dynamic or one of the other mapping schemes.
This is expected behavior if your program is running and you're trying to display a large 16 bit image. To fix this behavior there are a couple options:
Change the 16 bit display mapping to something other than full dynamic. You can choose which 8 bits to display or if you want to map the bits.
Resize the image just for viewing purposes on your front panel (since you aren't going to view every single pixel of you image on the screen). You can use the IMAQ Resample.vi to do this. This will allow you to take your 1500x1500 pixel image and only display a 500x500 pixel version.
If you are interested in viewing small details of the large image, consider just displaying a smaller region of interest at a time.
Let me know if any of these solutions work for you. Good luck on your application.
Zach C.
Field Engineer
Greater Los Angeles

0 down vote favorite share [fb] share [tw] How to hide cut/copy/paste/Replace- menu on the UIWebView when it is being displayed over the keyboard. Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text b

How to hide cut/copy/paste/Replace… menu on the UIWebView when it is being displayed over the keyboard.
Detail: I am having a HTML from, having text box, displayed using UIWebView. If user types in text box it shows the keyboard. Now If user tap and hold on text box it shows a popup menu. Now while keyboard and pop up are being displayed user scrolls the view. At this time it shows pop up over the keyboard which I need to hide.
I tried setMenuVisible of UIMenuController when popup rect and keyboard rect intersects each other on viewDidScroll but it didn't help me.
Any clues will help a lot.
Thanks.

You are more likely to get an answer if you post programming problems to the Developer forum. This forum is intended for normal user level problems.

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. Help

I have a 27" thunderbolt display NOT the iMac, and I'm trying to connect my xbox 360 to it via the Belkin AV360. I plug everything in and it does not work? I check all the power cables and and connections and still not he issue. Iv'e tried C-F2 also. has anyone used this devive (AV360) on there own 27" thunderbolt display (not the imac) and gotten it to work? If so I'd appreciate the help.

There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

I had a hard disc failure and had to reload Design suite 6 from disc. The program is now telling me I have 7 days to register the product or it will quit working. The serial number is already registered. It won't connect to the adobe site from the popu

I had a hard disc failure and had to reload Design suite 6 from disc. The program is now telling me I have 7 days to register the product or it will quit working. The serial number is already registered. It won't connect to the adobe site from the popup screen that comes up telling me I only have 7 days to register. What do I do?

Go to the Help menu in Photoshop and choose Activate. It should open a wizard allowing you to do this.
If that fails, Contact Customer Care after clicking on one of the activation links. The more information you give them, the easier it will be for them to help you.
Gene

HT201401 I had restored my iPhone 4 but after restore my camera can't function well after take picture from the camera it's didn't display in the Photo Gallery even can't take a video record,how to solve this?and i had tried to restore again,still the sam

I had restored my iPhone 4 but after restore my camera can't function well after take picture from the camera it's didn't display in the Photo Gallery even can't take a video record,how to solve this?and i had tried to restore again,still the same
kindly reply and fix this for me
reply to my email,tq

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

Photomerge interactive is no longer available in 12. I wasted 4 hours trying to find the option. Then read in a forum that the feature had been discontinued. Interactive is the primary reason that I keep the product up-to-date. When will the feature b

Photomerge interactive is no longer available in 12. I wasted 4 hours trying to find the option. Then read in a forum that the feature had been discontinued. Interactive is the primary reason that I keep the product up-to-date. When will the feature be returned?

No one knows if the interactive dialog will return, except adobe and adobe is not saying.
What operating system are you using?
On windows there is a way to get it back, but not if your using a mac.

The product version and database version are not compatible

The following simple program gets an exception {The product version and database version are not compatible} its very hard to proceed from here. Does anybody know what cause this?
Best Regards
Jan Isacsson
using System.Collections.ObjectModel;
using Microsoft.MasterDataServices.Deployment;
using Microsoft.MasterDataServices.Services.DataContracts;
namespace MdsDeploy
    class Program
        static void Main(string[] args)
            try
                ModelReader reader = new ModelReader();
                Collection<Identifier> models = reader.GetModels();
                foreach (Identifier modelId in models)
                    Console.WriteLine(modelId.Name);
            catch (System.Exception ex)
                Console.WriteLine("Error: " + ex.Message);
            Console.ReadKey();

Hi Jan,
For the error "The product version and database version are not compatible", as Emma said, the version number of the Service does not match the database schema version.
In your scenario, which version of database are you using? Please note that MDS update required after SQL 2012 SP1 installation, please refer to the links below to see the details.
http://byobi.com/blog/2012/11/mds-update-required-after-sql-2012-sp1-installation/
http://msdn.microsoft.com/en-IN/library/gg488708.aspx
Regards,
Charlie Liao
TechNet Community Support

After several years, suddenly my Photoshop CS wants me to reactivate or else the product is worthless. Fine, I have the activation code, but nowhere to put it! HELP!!!

After several years, suddenly my Photoshop CS wants me to reactivate or else the product is worthless. Fine, I have the activation code, but nowhere to put it! HELP!!!

Activation for CS has been retired. You won't be able to reactivate it, so Adobe has provided a free non activated Photoshop CS2.
Download Acrobat 7 and CS2 products
Gene

The image on my mac wont display on the tv with the firewire

the image on my mac wont display on the tv with the firewire

There's no such thing a a FireWire to HDMI converter. Do you mean Mini DisplayPort?
Are you trying to extend your desktop onto the TV or mirror it? Have you gone to System Preferences, Displays, and either clicked the Mirror Displays option, or used the Arrangement tab to move the two screens into the correct alignment? There should also be a Detect Displays button somewhere in the Displays panel.
Matt

While i was updating it was failed for 3 times and then i started to update it again and then it was showing as the product verification could not be verified and the product verification may be damaged or not signed

while i was updating it was failed for 3 times and then i started to update it again and then it was showing as the product verification could not be verified and the product verification may be damaged or not signed

Mavericks installer can’t be verified
Mavericks Installer can’t be verified (2)
Try running the combo update.
10.9.2

When I look up the creation date for files on my Macbook I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

When I look up the creation date for files on my Macbook (using "get info", or the information window in Iphoto) I get the date and month in brackets, but not the year. Why is this and how can I look up the year?

Does the Date Modified column in a window set to List view show the date correctly, or does it also display it incorrectly?
To add additional columns to a Finder (folder) window, with that window open and active open the View Options for it. You can do that by pressing Command-J or by selecting View Options from the View menu in the main menubar.

In the Production Order, Sales Quotation is displayed not the Sales Order

Similar Messages

Maybe you are looking for