In the projectfolder a project of 27 Gig. possible??

In my opinion the eventfolder stores the raw data (footage) what means (of course) me by a big numbre of Gig's, but the projectmap stores just the information "where and what to find to play a movie" and therefore is it a small map. (like iMovie, FCE4, etc.)
In my projectfolder I discoverd a numbre of 27 Gig. for only an movie of 8 min.
What is wrong because I am permenty told by FCPX "the memory is to low". (and still prox. 8 Gig free)
bruce

Thanks, this explanes. But if the total of render files is about 4 times the real movie (in QT 9 GIg) what to say? Bying 500 Gig ext. drive? I get more and more less positive about this slow running and clips losing program...

Similar Messages

How do you send more than 1 iMovie project to the same iDVD project???

I have 3 separate movie projects in iMovie with chapter markers and am trying to send them over to ONE iDVD project. Every time I send a movie over, it creates a new iDVD project and I can't get all 3 movies in the same project.
I'm trying to put each movies as a submenu under the main menu in iDVD.
Any help would be appreciated!
iMac G5 Mac OS X (10.4.8)
iMac G5 Mac OS X (10.4.8)

Thanks for the help Karsten...
OK, after a long night of trial and error, I've figured it out...
Issue 1: Files not showing up in the media pane--- miraculously after shutting down all open apps and then restarting the computer, my iMovie projects are now showing up in the movie pane of the media panel in iDVD...
Issue 2: Getting more than one movie project into iDVD with all the chapter settings--- a little more complicated!
In iMovie: SHARE > iDVD gives you a new iDVD project with 2 submenus: 1 with the entire movie, and 1 with "scene selections"
If you try to add a second iMovie project to the same iDVD project; it's not possible from within iMovie (at least not that I can figure out!).
You can add this second iMovie project to the same iDVD project by adding it to the project within iDVD from the MEDIA > MOVIES pane. This, however, will only add the movie and not give you the second submenu with scene selections.
To get the 2nd iMovie project into iDVD, I dragged the 2nd movie project from a finder window into the opened iDVD project. This adds the 2 submenus (1 with the movie and 1 with the scene selections) to the iDVD project.
Hope this is useful to someone else, too.
Thanks!

How to transfer the stock form Project stock to Sale order stock

Hi
How to transfer the stock form Project stock to Sale order stock
I tried to do this with movement type 413Q
System is giving me error
Valuated project stock not allowed with customer stock.
Message no. KI346
How to do this
Thanks
NK

You can use Mov Type 412-Q
412 Q Transfer posting project to own - reversal
Thanks
Rajesh

Multiple developers working on the same application/project

Hi All,
We have multiple developers working differnt components of the same application/project. As most of them are working on their local systems within their local projects which later has to be integrated as one application project I am afraid the integration would be a big challenge.
Can someone suggest a way this can achieved without much additional effort and code/ functionality loss.
Best regards,
Divya Rao

Hi Divya,
I this can be accomplished by using JDI.This helps in easy integration ,version and change management.
For more details refer to:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/03/f6bc3d42f46c33e10000000a11405a/frameset.htm">SAP Help</a>

How to connect two iMacs to the same FCE project?

Hello All,
Right now I have an iMac that is about 1 year old. I'm about to purchase another iMac. What I want to do is run FCE on both and work on the same video project on both. Is this possible?
So the idea would be that I one person A could color correct and person B could edit and perform other functions on the second iMac. Can you hook them up by firewire and do this or is this beyond what you can do with FCE and two iMacs?
Thanks for your help.
Mike

Hello Michael,
First, you will need two fully licensed copies of FCE, one for each iMac. Each license allows you to install FCE on 1 Apple desktop + 1 Apple laptop as long as you own both computers and do not use FCE on both at the same time. But it *does not* allow you to install it on 2 Apple desktop computers (eg iMacs).
Second, in order for two people on different computers to access the same project, you would have to store all the media & scratch files in a common location, and set up each copy of FCE to access the files from that location. The problems with this approach are 1) FCE cannot do this over a network, 2) you cannot connect an external FW drive to both computers at the same time, 3) FCE prefers that your FCE Project file(s) be on your system HD.
You could use an external FW drive to store your media & scratch files; then connect the FW drive to the computer that is going to work on the project - but not to 2 computers at the same time. You will still have to copy the FCE project file between the two iMacs each time you swap from one to the other for editing.

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share form

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

How to stop the spinning ball/pizza that is stalling repairs to project on imovie 09? on macosx10.5.8 using iomega and superspeed ext h.d. as storage for the events and projects archive of a wedding video that has had audio sync problems on all share formats (iDVD, mp4, and last of all iTunes). The project label now carries signal with yellow triangled exclamation “i tunes out of date”.
To solve the sync problem I’m following advice and detaching sound from all of the 100 or so short clips. This operation has been stalled by the spinning ball. Shut down restart has not helped.
The Project is mounted from Iomega and superspeed ext hd connected to imovie09 on macosx 10.5.8.
What to do to resume repairs to the audio sync problem and so successfully share for youtube upload?

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot

I have a project that crashed on me when I was about to finish it. When I try to reopen Final Cut Pro it wouldn't open until I took the project out of the Final Cut Project folder. Can somebody tell me if this is a problem that has a solution? I cannot go back to the project at all.

If you are using 10.0.3 or above Apple added a backups folder that for a little extra protection in cases like this. If you quite FCPX go to your Final Cut Pro Projects folder. Find the folder that has the project in question. If it has a backups folder there should be a file with a date stamp and .fcpproject extention, that is your back-up. Just move the back-up from that folder one folder up to the place where you deleted CurrentVersion.fcpproject from. When I have had to do this I haven't renamed the backup but some people to recomend that you rename it to CurrentVersion.fcpproject and it seems to work both ways. Ofcourse it wont work if there is already a CurrenVersion file there you will need to delete that one first.
If you don't have the backups folder or there is nothing in it I am not sure if there is anything that can be done.

How to upload many Files in the table of Project Document (Solution Man) ?

I have generate some hundreed PDF-Files and I want to upload this PDF files in the table of Project Documentation in the Solution Manager.
In the Solution Manager is it only possible to upload this files single.
My intention is to write an abap program that upload all files automatically in this Project Documentation and assign this documents in the right project.
Which tables are used in this context ?
Where I can find the assignment between documents and projects in se16, in wich table ?
Is existing an introduction document to this topic, where i can get more information ?
Thank you in advance.

GerdW wrote:
Hi dimitriev,
Target: I have a array of cluster in my project in main VI and have lots of VIs which uses this array via reference as global variable.
When accessing that array from a lot of locations simultanously you will get RACE CONDITIONS. Easily and fast…
Use a FGV aka AE instead to encapsulate your "data object"!
Another good option sounds like the Data Value Reference. Those work really well if you want to keep a reference to pass around to everybody.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Guidance on the structuring of Projects in OWB

Dear all i am after some guidance / best practice for the use of projects within OWB and how best to structure to gain the best benifit within the warehouse environment.
We have decided to apply a staging area becuase we pull data from around eight systems, we had also thought about creating projects that link back to business fuctions to aid in segregating data. Having looked at this further we feel that this could cause duplication of effort and a more complicated structure. What i am after is a bit of the lessons learned from others in how to approach this and pit falls to avoid so would be grateful from any advice you may have in this area.
Regards Kevin

I would point out that this strategy may depend a bit on your project.
For example, we are on phase three of a loooooooong project that is slowly building up the enterprise warehouse as legacy (60s-era) Cobol systems are each being dragged kicking and screaming into the 21st century.
Because of our need to balance ongoing development with support for what is deployed currently, we are creating each of our major releases as a separate project.
This allows us to more easily do things like major rework of our standard libraries of common public transformations, rework of conformed dimmensions, etc without worrying about having to possibly hold up new development to revert to old common code in order to perform ongoing maintenance. It also made it easier to segregate support teams from new development teams without having to put in place too onerous a management oversight system to ensure that no-one steps on anyone elses toes.
Then again, this project is definitely a special case from the security point of view....heck, most of the developers here will never even see live data due to security restrictions.
Mike

How can i change the class in the Class Library project to be static or public so i can use it from the windows application project ?

First i know that when i make any changes to the class library project i need to rebuild the project then to remove the Capture.dll from the TestScreenshot project and then to add again the updated Capture.dll
The problem for example in this case i'm trying to use a public static variable i add in the DXHookD3D9.
In the DXHookD3D9 i added this public static variable:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
//using SlimDX.Direct3D9;
using EasyHook;
using System.Runtime.InteropServices;
using System.IO;
using System.Threading;
using System.Drawing;
using Capture.Interface;
using SharpDX.Direct3D9;
namespace Capture.Hook
internal class DXHookD3D9: BaseDXHook
public DXHookD3D9(CaptureInterface ssInterface)
: base(ssInterface)
LocalHook Direct3DDevice_EndSceneHook = null;
LocalHook Direct3DDevice_ResetHook = null;
LocalHook Direct3DDevice_PresentHook = null;
LocalHook Direct3DDeviceEx_PresentExHook = null;
object _lockRenderTarget = new object();
Surface _renderTarget;
public static decimal framesperhourtodisplay = 0;
protected override string HookName
get
return "DXHookD3D9";
List<IntPtr> id3dDeviceFunctionAddresses = new List<IntPtr>(
framesperhourtodisplay
The problem is i can't even get to the Capture.Hook namespace and not to the DXHookD3D9 from the TestScreenshot application window project.
This is a screenshot:
For example fro the FramesPerSecond class i can use it get to it from the windows forms application.
namespace Capture.Hook
/// <summary>
/// Used to determine the FPS
/// </summary>
public class FramesPerSecond
int _frames = 0;
int _lastTickCount = 0;
float _lastFrameRate = 0;
Since it's public i guess.
But if i will change the DXHookD3D9 class from internal to public:
public class DXHookD3D9: BaseDXHook
I will get error on the DXHookD3D9:
Error 1
Inconsistent accessibility: base class 'Capture.Hook.BaseDXHook' is less accessible than class 'Capture.Hook.DXHookD3D9'
And the BaseDXHook class:
namespace Capture.Hook
internal abstract class BaseDXHook: IDXHook
protected readonly ClientCaptureInterfaceEventProxy InterfaceEventProxy = new ClientCaptureInterfaceEventProxy();
public BaseDXHook(CaptureInterface ssInterface)
this.Interface = ssInterface;
this.Timer = new Stopwatch();
this.Timer.Start();
this.FPS = new FramesPerSecond();
Interface.ScreenshotRequested += InterfaceEventProxy.ScreenshotRequestedProxyHandler;
Interface.DisplayText += InterfaceEventProxy.DisplayTextProxyHandler;
InterfaceEventProxy.ScreenshotRequested += new ScreenshotRequestedEvent(InterfaceEventProxy_ScreenshotRequested);
InterfaceEventProxy.DisplayText += new DisplayTextEvent(InterfaceEventProxy_DisplayText);
~BaseDXHook()
Dispose(false);
How can i solve it so i can use the variable framesperhourtodisplay in the DXHookD3D9 class with the TestScreenshot windows forms application ?

Hi,
I dont know if it will work here, since I dont know the complete structure, but the base call must be public, if the derived class is public, so the base class is at least as accessible as the derived class.
Try make the base class public. (And maybe the base-class IDXHook of the base also...)
Or use a different approach and make only the properties public that are needed to be public by adding an extra class...
A structure could look like:(you need to create a class thats public in your dll and expose a property, and set this property in the internal class...)
In the Accessing class (here Form1)
public partial class Form1 : Form
public Form1()
InitializeComponent();
private void Form1_Load(object sender, EventArgs e)
C c = new C();
MessageBox.Show(B.F.ToString());
and in the class Lib:
internal class A
public A()
B.F = DateTime.Now.Millisecond;
public class B
public static int F { get; set; }
public class C
public C()
A a = new A();
(add a referenc to the class lib from the accessing project)
Regards,
Thorsten

How to assign project specific task with the newly created projects ?

Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

Can we use the AdventureWorks2008R2 data for the real time project.

Hi,
In our project we are trying to do the data scrambling on First name, last name and middle name...
In the regular practice we use to update the names as
First Name = FN+<PERSON_SNO>
Last Name = LN+<PERSON_SNO>
Middle Name = MN+<PERSON_SNO>
The Problem is the names are not looking realistic, so I thought of applying some logic and updating our PERSON table names based on Person.Person table in adventure works.
My question is can we use the AdventureWorks2008R2 data for the real time project. Is there any cop right issue.
Someone please help me solve this issue.
Thanks
Karthikeyan Jothi.

Please read this link content:
Adventure Works Sample Site
sqldevelop.wordpress.com

Using my MacBook Pro as the host for projection to my TV via AppleTV?

Can I subscribe to HBOGO thru Apple TV and avoid cable service using my MacBook Pro as the host for projecting to my TV via AppleTV?S

Possibly.
Some sites such as TMN GO which is similar will not allow mirroring to take place.
It works for about a minute then shuts down... Security settings from the site.

Unable to launch project schedule in project pro 2010 via the icon in project center on project server 2010

Unable to launch a project in project pro 2010 via the icon in project server 2010 project center. Nothing happens. The pull down "open" menu doesn't do anything either. Can't open the schedule in project pro in read-only or edit mode.
This is happens to a handful of project managers. Can't find a common thread.
Janice Weaver

Hi Brian - the latest 'weight on my shoulders' was vacation :) - so just catching up - first day back. We do have a fix coming in August CU for a problem that sounds very similar - but we would need to see your data to confirm if this is the case
or not. So the choices at the moment are to wait until we release the week after next, or open a support incident - but we would likely need assistance from your DBA to either run some queries or get us a copy of the DBs.
Best regards,
Brian.
Blog |
Facebook | Twitter | Posting is provided "AS IS" with no warranties, and confers no rights.
Project Server TechCenter |
Project Developer Center |
Project Server Help | Project Product Page

How to define the OSB Configuration Project that an OSB Project uses?

Hello,
I'm using the Workshop bundled with "Oracle Service Bus 10gR1" (Oracle Workshop for WebLogic, Version: 10.3, Build id: 1137967).
Where does one define the OSB Configuration Project that an OSB Project should use?
I deleted an OSB Configuration Project. Now, all the OSB projects that were associated with it are in error stating "This project is not associated with an Oracle Service Bus Configuration". I created a new OSB configuration project so that I may re-associate the "orphan" projects with it. However, I can't seem to find a way to do that.

You can create a new osb configuration project and drag the other osb projects on this projects.
then i will link them to it. (make sure you use the oracle service bus perspective at the top right of the eclipse ide)

In the projectfolder a project of 27 Gig. possible??

Similar Messages

Maybe you are looking for