In the right and wrong place.

I know this thread belongs in another forum. I actually placed it in another forum and received next-to-no response. I guess those guys aren't you guys.
Here it is:
"Amplification without iTunes."
Volume's become a serious issue. My sound is uneven. Music I uploaded months/years ago is fine, the new stuff is far below it. If I'm jogging, some albums near inaudibility amid background noise. I've had this problem since I upgraded from Photo to Video, I'm not sure exactly when, I'm not sure why.
Why is this?
I've trying tinkering with the volume through iTunes. No avail whatsoever. My volume limit is at maximum. It's driving me mad.
I'm looking for an external program to amplify mp3's before I upload them. Or, some solution.
Any ideas? Much appreciated.
...I received one response mentioning iVolume and MacMP3Gain. They're two programs I'm kind of dubious on. I don't just want to level my volume. I want to make that average level louder.
Thank in advance.

tinker with the applicatio audio MIDI setup located in our utilities folder(preinstalled)

Similar Messages

HT201269 Is there a right, and wrong way to plug the lightning connector into the phone?

The lightning connector dosen't want to plug into the slot and I don't want to force it, ... is there a right and wrong way to do this bisic and simple step? Thanks

No, it is a reversible plug. Either way is fine.
Just make sure you plug it in straight until it "clicks" into place. It may take a bit of force if new, but check there's nothing in the port first.

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

How do I share / unlink the right and left channel, so I can work with them individually ?

I use "Adobe Sound Booster CS5"
I have a stereo soundtrack, which I only want to remove noise in only one channel (right).
How do I share / unlink the right and left channel, so I can work with them individually ?

When Soundbooth was first developed, it had a few extra things than what were not available in Audition. However, Audition remained the more high end sound editing tool. Soundbooth was locked to a multiple channel editing approach. In Audition, single editing is easy - you simply click the L or R at the right end of the sound channel to lock it and then you can edit the other channel only.
Soundbooth has been discontinued and Audition now has taken its place from CS6 to the Creative Cloud.
The above is some background info. To your current situation, you can use a workaround like:
* Export your audio file to separate channels by File > Export > Channels to mono files.
You will get 2 files with _L and _R suffix.
You can then edit them separately. You can go from Mono to Stereo by the following step.
Or
* Choose - Edit > Insert > Channels into New Multitrack file.
That will separate the Left and Right Channels and add them to a new multitrack file.
You can then click the Edit link at the top right of the channel to edit it.
You can then save that file as a new audio file.
Dean

I'm trying to mix a guitar track so it is heard in the right and left ear and not in the center

I'm trying to mix a guitar track in GarageBand. I'd like to have the same guitar track heard in the right and left ear. When I mix it that way, the guitar comes from the center. Is there a way to place this track so that it appears to come from both the left and right side?

Mr. Snook wrote:
If my finger picked guitar track is doubled and pasted slightly ahead or behind, the guitars will be out of sync, I think, and sound off in mix.
emphasis on "tiny amount"
TINY fractions of a second. this is how you get the "full sound"
zoom in as far as you can, and make sure the "snap to grid" and "alignment guides" menuItems are not checked.

When i take a picture with my ipad 2 lets say im looking to the right and i take the picture and when i go to the gallery my face is looking the other way(left)

when i take a picture with my ipad 2 lets say im looking to the right and i take the picture and when i go to the gallery my face is looking the other way(left)

The picture in the gallery is correct. The picture you are looking at before you capture it is a mirror image such as you are used to looking at, otherwise you would not be able to handle it. Look at More Like This >>>>>>>

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

My macbook keeps freezing with the left side of the screen on the right and the right side of the screen on the left. Help

My 17-inch early 2011 macbook pro keeps freezing on me. The freeze usually occurs when I'm importing or exporting pictures, when I stream anything, or If I am watching a dvd. The left side of the screen shifts to the right and the right side of the screen shifts to the left. lines also appear on my screen and I can not force quit any open application. I have not dropped my laptop at all.
Mac OSX Lion version 10.7.5
2.2 Ghz Intel Core i7
I would like to avoid going to the an apple store to fix this problem if possible. The closest one to me is 40 miles away.
Help : )

If you don't have the Applecare extended warranty then you will need to pay for the fix. The fix is a New Logic Board. It seems as your Graphics card is failing in some way. No there is no software fix for this.
The Graphic chip is soldered to the logic board and the only way to change/fix it is to replace the complete logic board.
Good Luck and Best Wishes

TS1702 In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

In pages, when I get to the end of a line, the text refuses to start again in the left, it continues on the right and goes down the page, anyone know a solution?

Does this occur in all of your Pages documents? Are you certain that you haven't formatted the type to run flush right? (Align right I mean - sorry old typographer lingo). Look at the ruler at the top and check the Align setting.
Have you tried quitting Pages completely and the restart the iPad?
Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Restart the iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

When I open a Bookmark folder , the contents appear to the right and I prefer they appear to the left as they did until I was organizing some folders ?

I recently updated FF and then spent some time organizing and how the dontents of the folders appear to the right and I want them to go back to the left as they have been for as long as I have been using FF

I do not use a Mac, but will try to provide some information.
There is a ''List all tabs'' arrowhead that by default is on the right hand side, and appears once the number of tabs overflows the visible bookmarks toolbar. that may be repositioned, if you customise the toolbars.
There is the bookmarks menu, on my lynux system that drops down left of centre.
There is a sidebar, that I believe is available in all desktop OS s an is on the Left Hand SIde. Finally there is the bookmark library, which effectively is its own window and may be placed as required.
I am wondering if it is the bookmarks sidebar that you normally use, and have lost the option for ?
(Or are you talking about [[Use Tab Groups to organize a lot of tabs|tab groups]] ? or the drop down menu from the [[Bookmarks Toolbar - Display your favorite websites at the top of the Firefox window| Bookmarks toolbar]] ? )

TS3274 my ipad is locked. im trying to unlock by sliding to the right and will not unlock. what can i do?

trying to unlock by sliding my finger to the right and will not unlock

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414

When I expand a photo it will slide off screen to the right and won't stay centered

When I expand a photo it will slide of the screen to the right and won't stay centered. It also very hard to get to the close button when this happens which is bottom right of picture.

Hello MCoyne50,
Thank you for using Apple Support Communities!
It sounds like when you are viewing a photo in the Safari app and you zoom in on it, the photo moves to the right on its own and it cannot be moved back.
I would try a couple of things here.
First quit all the apps that art running and then restart the phone to test the issue again.
From the Home screen, click the Home button twice.
Tap and hold on the app.
When it starts to jiggle, tap the - to close it.
Double-click the Home button and try opening the app again.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
Then
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
From: iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Take care,
Sterling

Can I shrink the iTunes webpage on my PC monitor so it does not cut off the right and left margins?

Can I shrink the iTunes webpage on my PC monitor slightly so it does not cut off the right and left margins?

Can you? Are you capable of resizing the window?
Only you can answer that question.
If you want to know if it is possible, yes, it is possible.

Help! Saving a PDF out of Illustrator and the PDF is cropped on the right and bottom. Artboard size is fine.

We're having a weird issue with Illustrator that rarely can be replicated. When we're saving a file as a PDF, sometimes the PDF gets cropped to the right and bottom and we're not quite sure why it's happening. Sometimes we'll just go an open the Illustrator file again and re-save and it's fine. Other times we may need to re-start the computer or re-start Illustrator and it's fine. Other times when we do all of the above, it still crops the PDF. I'm baffled as to what's happening.
We're running 10.6.8 OS X and this is Illustrator CC.

This is in Illustrator CC Version 17. It is fine when you open them back in Illustrator. I have also noticed that from Illustrator if you do a 'Save As', select PDF, then select one of the PDF presets (I use 'Press Quality) the resulting PDF when opened in Reader displays how I want it, with the artwork as it was positioned on the Illustrator artboard (not cropped). If I then open in Illustrator again, make a change to the artwork, and select 'Save' (not 'Save As') when opened back in Reader the file is cropped again.

I need to know how to "compress" the Folder Tree. The File folders are moving to the right and out of sight in Lightroom 5.

I need to know how to "compress" the Folder Tree. The File folders are moving to the right and out of sight in Lightroom 5.

A couple of suggestions that may help:
- Make sure you've made the left-hand column as wide as possible by grabbing the divider between the column and the Library grid view.
- You can hide a parent folder from the display by right-clicking it and selecting Hide This Parent. This will shift all the child folders to the left.

In the right and wrong place.

Similar Messages

Maybe you are looking for