In the second step of bootcamp, I am supposed to either check the box where it says create a windows install disk, what exactly is this? Do I need to do this?
In the second step of bootcamp, I am supposed to either check the box where it says create a windows install disk, what exactly is this? Do I need to do this? I have a windows 7 install disk, but I don't know what this means.
If you already have Windows on a DVD or USB drive, you don't have to tick that option. That's only for people who have Windows on a ISO file and have to burn it into a USB drive
Similar Messages
-
Process Chains Always Hangs at the second step waiting for an event
Gents;
all BI process chains created in Production system are always hanging in the second step waiting for an event RSPROCESS with a certain parameter. This issue is happening for all process chains in Production system and it is not happening for the same in other systems in the landscape (development, Copy of porudction, quality and so on). I tried to trigger the event manually using SM62 but the job is always stick to status " released". the same thing was replicated in other systems and the job status has changed and the process was completed.
Any idea what might cause this issue??
Thanks.Hi,
You said that this thing is happening only in production system.Try doing the following checks :
1.Check SM21to see if there are any red entries.It can be possible that there is some data base RFC connection failure.While checking SM21, make sure you give proper selection condition.If there are any red entries, you may take the help of basis guys to understand the type of failure.May be file system has got some problems.
2.Check St22 and try to analyse if any short dumps.
3.Try to check Connection with the source system ( Goto RSA1->source system tab->right click on the source system and select check option to find if any errors in the connection.
4.If possible, try to load manually in some other info provider.
Thanks,
Tarun Brijwani. -
I was going to set up iMessage and when I pressed next on the second step I went back to the start help
Maybe:
iOS: Troubleshooting FaceTime and iMessage activation -
Hi, I am trying to install Windows on my MacBook Pro with bootcamp. Every time I open bootcamp I am only able to check the first two boxes but not the third one saying "install or remove Windows 7". I did this before using the same computer and the same hard drive so I am not sure why this is happening now but did´t happen then. Any solutions ?
Was your Bootcamp info.plist manipulated to change any options?
-
I cannot get the new mac mini to wake from sleep and trigger the displays - this is the second mac mini I have had and both have had the same issues. It worked before on my macbook extremely well...
Using 2 displays, connected via HDMI and thunderbolt
Been on to support a number of times now - is anyone experiencing the same issues?BUMP.
I actually showed this to Apple geniuses when I took my computer to the apple store, and it's still here. In console it says:
kernel[0]: Previous Shutdown Cause: -128
I don't know if that's related or not, but maybe helps? -
I have two problems. The first one: when I conect my iphone 5 on the pc appears "-42110" and the version of itunes is the last one. The second is that I am not conectin itunes store fron the iphone appears"couldn´t conect to itunes store". I need help. Tk
First problem first
As your iTunes is up to date, remove the SC Info folder. -
I am trying to sync a playlist to my Nano, but when I click on the Music tab at the top,
it will not allow me to select the option Selected Playlist, Artists, etc. I cannot un-check the Entire Music library
option and check the Selected Artist … one.
I have changed the Sync option to Manually sync, but that does not help.
How can I change this to the second option?
Thanks.There is a checkbox above those two options for how to sync. It says Sync Music; it enables automatic syncing. That box needs to be checked before you can select from the two options for how automatic syncing is performed.
NOTE: If the iPod is current set up to Manually manage music [and videos], checking that Sync Music box replaces its current content with content from your iTunes library, based on how automatic syncing is set up on that screen.
So, if your goal is to add ONE playlist to an iPod that is managed manually, you do not want to do this because iTunes will erase the iPod's current content and replace it with just that ONE selected playlist (and whatever else you select on that Music settings screen).
Instead, if the iPod currently uses the manual setting, you need to add playlists manually to the iPod (not use the automatic syncing setting). Please post back with more details about your situation. -
can bootcamp be used with Windows install disk on an external drive (internal is broken) ?
With Boot Camp, you must install Windows onto in internal HDD (or SSD). If you are referring that your internal Optical drive is broken, you might be able to install Windows from an external drive, but you might not. I have heard varying levels of success with that. I'm not sure what the official stance is, but I do know that if youe machine shipped with an internal optical drive, then you must use that to install Windows using Boot Camp and not swap it out for a "data doubler" and try to install from an external optical drive.
-
I am trying to move my itunes library from my old pc to my new imac, home sharing is on and I can see the shared library. My problem is that when I check the shared library to import it to my imac I cannot import it. Can anyone help me?
You need to transfer the iTunes Library from the most recent backup you made before the hard drive was replaced.
You can't transfer the full iTunes Library from the iPad back to iTunes.
There are third-party Windows applications that will transfer data from an iOS device, but they don't re-create the iTunes Library exactly as it was before. -
I sent in my iPod nano to the replacement program about two weeks back. However, I checked the status of the repair and it still says it has not been received yet. However, my boyfriend sent in his the same time I did and his repair status says repair being diagnosed. I still have the "receipt" of the package when they first sent it to me. I sent it via FedEx. Is there any way to follow up on where the nano could be or maybe find out if I can still get a replacement even though my nano might be lost in transit?
I sent it via FedEx.
Call FedEx. They will be able to track their own packages. They will let you know if your iPod Nano was delivered and to who! -
After updating to 8.1.2 my iPad continues to restart. I tried resetting all the settings and this didn't work. I tried rebooting by holding the start button & power button and it didnt work either. The problem has actually worsened. I can no longer use my iPad.
You need to restore the iPad.
Use iTunes to restore your iOS device to factory settings - Apple Support
If that will not work, you will need to use Recovery Mode to restore.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support -
I purchased OS X Lion on my laptop and if I use the same username on my desktop it should just download not make me pay again, yet it is still saying "BUY APP" not "INSTALL." What do I do?
Hi...
How to re download apps from the Mac App Store:
Open the App Store. From the menu bar click Store > Sign In
Click Purchases from the top of the App Store window.
Select which apps you want to re download. Then right or control click where you see Installed then click Install.
Make sure and use the same Apple ID used for the original purchase.
Mac App Store: Backing up your app purchases -
I recently uploaded the Maverick operating system. I wanted to scan some things on my HP Printer/Scanner and could not . This is the error message I received: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. I am a novice with the computer and have no one to help. I hope someone knows an easy fix.
Thank youThis worked for me:
"Although it is not a 'fix' for the HP issue, I did find a workaround that helped me. In the Preferences Panel in MacOS X you can pull up the Printer/Scanner preferences and scan directly from OS X. I'd not known of this prior to posting here and it worked like a charm."
"Of course, HP should still update their software, but it's good to know that Apple has it covered for them."
I found it here:
http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/MAVERICKS-WONT-SCAN-HP-C3 09A/td-p/3052105 -
I have Maverick 10.9.1 installed I scanned a photo on my HP D 110 series but it won't let me print or save it: An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.
Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software -
In iphoto how to get the gold you delete a photo warning message when you check the box not ask
in iphoto how to get the gold you delete a photo warning message when you check the box not ask
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7 or later: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
Maybe you are looking for
-
I would post this in the compressor forum but its a ghost town. I have started a new project for a client in which I am to deliver my finished product as a program stream Mpeg2. My frame size is 1280x720 and I am being asked to keep the bit rate belo
-
I just realized that no tags are being displayed on Kuler. This includes tags that I only now entered for a theme. Hopefully this is just a problem with displaying them, and that all tags have not been lost. (*gasp*) --Bill
-
Here's a question that's plaguing me. What should I do if I wanted to draw a component(either applet or Swing and maybe both) differently from what it used to be? For example, I want my button not to be rectangular but circular(doesn't have a rectang
-
Safari won't load Java applet? (latest Java 7 update 51)
Hello, I am trying to use the following website: http://kidsnvue.com It is a portal that allows me to watch my child at daycare over the internet with a password. The trouble is that the video works with Java 7. So every since I downloaded Java 7 u
-
Hi, I recently updated to OS 10.4.10 and lost all sound playthrough from devices plugged in through the mini-plug (microphone) input on the side. I have an external speaker set plugged in to the mini-plug (headphone) output on the side (doesn't work