In the summer of 2013 I updated my Macbook Air to Mavricks and my solid state hard drive crashed and had to be replaced. Has this issue been fixed and is it safe to upgrade?

Please help! I don't want to have to get a new hard drive. My warentee has now expired. Is it safe to upgrade? The service person I talked to said that it had happened to quite a few MacBook Airs.

MacBook Air Flash Storage Drive Replacement Program
It's unrelated to Mavericks.

Similar Messages

  • We run an iMac 3.4 GHz I7 for our church worship service; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing.  Has this issue been resolved?  Thank you!

    We run an iMac 3.4 GHz I7 in our church worship service; we have front screens and a stage display monitor ; we haven't upgraded to Mavericks because we heard about issues with multiple screens crashing.  Has this issue been resolved?  Now that we are 2 upgrades behind, I'm getting little concerned.  Thank you!

    Oh, well that was a whole other kettle of fish:
    Oh the G4 I attempted to install iLife '08 before Lepoard was available. About the only thing that installed cleanly was iPhoto. I ended up reinstalling everything back to iLife '06, and then upgrading back to the current stable version of the iLife '06 version. I didn't attempt a reinstall until after I upgraded to Leopard.
    When I did reinstall, I made a iLife '06 folder, copied all iLife apps into it, and upgraded. Seemed to work, except for the part where iMovie gets left behind and iDVD is only mostly functional.
    When I installed on the other 2 machines, it was after installing Leopard and all upgrades. On those 2 machines, I didn't bother with the copy, I just moved everything to the iLife '06 folder I created, and did a fresh install.
    I didn't have to do anything with the iPhoto Libraries, that I can recall.
    I always do an upgrade, never an archive and install. I've never had a problem with this back to 10.1 or 10.2.

  • Recounting My Successful Experience Upgrading My Solid State Hard Drive

    I just successfully upgraded my solid state hard drive from
    60 gigabytes to 256 ; the machine is a Lenovo T400s - while the upgrade is
    still fairly fresh, I thought I’d share my experience – maybe someone else will
    benefit – most of what I’m about to relay was provided by Zoltanthegypsy and
    GMAC-R60 – I thank them again for their advice - but I will try to add some
    additional thoughts based on my experience – for the most part I was able to
    use the tools provided by Lenovo – my original hard drive had 3 partitions, S
    (system), C ( windows + my programs & data), & Q ( Lenovo stuff like
    backup and restore, the factory copy, etc.) :
    Create a “factory state” copy of the machine to
    DVD or CD soon after purchase – I say soon after purchase because it appears that
    a minimum amount of hard disk space is required – my 60 gig was almost full and
    I got a message that there wasn’t enough space – I can still make the copy but
    I’ll have to move some things off temporarily – this step isn’t really related
    to the upgrade but it is a good idea –  Start/Lenovo ThinkVantage Tools and you’ll see
    the option – and as Zoltanthegypsy has pointed out you will most likely not be
    able to do this from the new hard drive after the restore operation covered
    below – I haven’t proven this out but I do know that my Q space on the new
    drive is smaller than before – something was lost and it’s most likely the
    factory state – and so keep the old hard drive long enough to make that factory
    state copy to DVD or CD.
    The next step was a full backup to a Lenovo
    external hard drive – it came with one partition - the external that I got from
    Lenovo has a small keypad and is password enabled – this fact will come into
    play further on – as GMAC-R60 noted a pop-up will appear giving the option to
    create rescue media – you want to select this option so that the external will be
    bootable.
    When the backup is complete you want to swap hard
    drives making sure to first unplug & remove the battery .
    There may be other ways to do this next step but
    here’s what I did – I powered on the machine and let it go through what
    appeared to be a BIOS routine – note that my external was attached to the
    laptop but it wasn’t activated by keying in the password – after the BIOS
    routine was finished I activated the external by typing in the password and then
    did a Control/Alt/Delete – the machine restarted and booted from the external –
    with hindsight I probably could have connected & activated the external
    before powering on but the instructions that came with the external suggested
    something different which didn’t work for me .
    I was now able to go into rescue and recovery
    and do a complete restore to the new drive – but to my surprise the extra space
    that I bought with the new drive ended up all in the Q partition – and Windows
    Disk Management didn’t enable me to reallocate the space to C.
    And so I purchased Disk Director 11 Home by
    Acronis – a $50.00 investment in a tool that I’ll probably never use again but
    I’m now able to use an $800 solid state drive rather than trying to recoup some
    money via Ebay -– within minutes I was able to reclaim the space and I now have
    enough C space to last the lifetime of the laptop – especially since all
    pictures go on a stick & my demographic isn’t into video games .
    One useful piece of information that I got from
    a user on the Acronis forum was that all of the Lenovo tools like rescue and
    recovery, etc. are available for download from the Lenovo website – and so if worse
    came to worse I could have deleted that Q partition, stretched C using Windows
    Disk Management , and then downloaded the Lenovo tools into C.
    One thing I’d like to learn to do would be to
    perform all the steps outlined above but without using the Lenovo tools – using
    Windows 7 tools instead but not having a Windows CD , i.e. how do you boot

    It went something like this:
    (On the stock drive)
    Plugged in a blank USB HDD, and a blank USB flash drive.
    - HDD formatted in NTFS, flash drive in FAT16.
    Ran the recovery media creator.
    - Created bootable media on flash drive, and put the recovery image on the HDD.
    Once done, shutdown, removed the battery, swapped the drive for a 500GB Scorpio Black (freshly NTFS quick-formatted). USB HDD and flash drive were still attached.
    Booted, and used F12 to select the flash drive for booting.
    It booted into the Windows Recovery Environment and I chose the Lenovo restore factory image option at the bottom of the list.
    From there on out, I just clicked through the wizard, and it restored.
    Upon finishing, I unplugged all of the external media, and had it restart. It then booted into OOBE as expected.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • I am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

    i am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

    yes you can do it and not void the warranty.  Those are the only hardware changes that Apple permits.  Instructions on how to upgrade the ram and remove and replace the hard drive are even included in the owners manuals for MacBook Pros.

  • Solid State Hard Drive Upgrade - Anyone?

    Has anyone upgraded their original MacBook Pro to a Solid State Hard Drive? If so, how time consuming was it and what equipment did you use?
    Thanks!

    Hi Robert
    I was able to find the Video for you please find the link given below.
    http://www.youtube.com/watch?v=_4n78ipOeLs
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • I am replacing my existing SATA hard drive to a Solid State hard drive and want to image the drive, is this possible?

    I am replacing my existing 320 GB SATA hard drive that clicks and makes weird noises to a Solid State hard drive and want to image the drive, is this possible?  I then want to replace the DVD with a secondary large drive for storage.
    So I am looking for any "gotchas" that I may be unaware of.
    Thanks!

    Put the Old drive in an external notebook drive enclosure. Install the SSD in your computer. Boot from your Old drive's Recovery HD:
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Clone Lion/Mountain Lion using Restore Option of Disk Utility
         1. Select Disk Utility from the main menu then press the Continue
             button.
         2. Select the destination volume from the left side list.
         3. Click on the Restore tab in the DU main window.
         4. Select the destination volume from the left side list and drag it
             to the Destination entry field.
         5. Select the source volume from the left side list and drag it to
             the Source entry field.
         6. Double-check you got it right, then click on the Restore button.
    Destination means the New SSD. Source means the external Old hard drive.
    Set the new Startup Disk to the SSD and restart the computer.
    This process clones both your old OS X volume and the Recovery HD volume to the SSD. You can use a similar process to clone the SSD to the new hard drive you will install.

  • I have a 2007 20" iMac. Can I get a solid state hard drive installed?  Can the Apple store do it?  How long?  What cost?

    I have a 2007 20" iMac. Can I get a solid state hard drive installed?  Can the Apple store do it?  How long?  What cost?

    Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac.  You should be able to set a password for it. Save it.  Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer,  I suppose,  back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity.  As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
    you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
    This handy article from Apple explains how
    How to move your iTunes library to a new computer - Apple Support''
    don't forget to de-authorize your iMac if you don't want to play purchased stuff there
    and re-authorize your new macBook Pro
    time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine  and go for it.  You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups  of your stuff.

  • I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

    I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

    Many thanks lllaass,
    The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
    Cheers
    http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

  • Mac mini solid state hard drive does that replace the 2 by 1T hard drive

    mac mini solid state hard drive does that replace the 2 by 1T hard drive

    There wouldn't be enough room in the Mac Mini enclosure for 2 Fusion Drives since they are really just a SSD and a Platter HD working in conjunction. Could really be smoking in a 4 Drive RAID box though. I am speculating here but there is only 1 additional partition allowed in the Fusion Drive. My thought is that the current Management Software would get thoroughly confused with multiple partitions probably due to mount points not being able to register in a normal manner. IMHO the Fusion Drive is another crutch for the normal/average user that doesn't want to be bothered with file management protocols.

  • Disk Drive Full. Whats the best way to transfer operating system to larger non solid state hard drive .

    Heres the Lowdown,
    I have a Desktop that has a 250 G Solid state hard drive , and a secondary 750 G Hard drive.
    My OS is installed on the solid state , and also a lot of my audio software which needs to also be on the same disk drive as the operating system ;
    Problem is I've run out of room and continually get DISK FULL error messages , which stop me from doing any real time audio tracking and recording.
    I've backed up all files to an airport drive ( I'm a bit paranoid about losing vital info) .
    Is there a way to reinstall the OS onto the second larger drive and just transfer the remaining software across
    Will I have to reinstall all previous versions of software if I do this?
    Will The processing slow down if the OS is run on the Standard drive rather than the Solid State drive ?
    Last time I tried to clear some space on the OS drive I accidentally deleted vital information, so I wanna make sure I do this properly.
    Any advice would be much appreciated.

    Carbon Copy Cloner (1 Month Demo with full capabilities).  Because CCC also has the ability to transfer your Recovery Partition
    SuperDuper (Free for a full clone).  Recovery partition will not be transferred
    Applications -> Utilities -> Disk Utility -> Restore (from SSD to 750 hard disk).  Recovery partition will not be transferred.
    Or install the OS on the 750 hard disk (with will install a recovery partition), then use migration assistant to move your files over.  Or you could then use one of the above utilities to overwrite the just installed OS without messing with the recovery partition.

  • I have a late model mac book air 11 inch can i upgrade to a solid state hard drive

    i have a late model mac book air 11 inch can i upgrade to a solid state hard drive

    If you're looking to get an SSD with increased capacity, they can be purchased from OWC:
    http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Express
    They are very easy to install.
    Note that I'm not sure on how this may impact your warranty.  Nothing in an Air is considered user upgradable.  Therefore there would be no reason for a consumer to open it up.  As Apple does not consider the SSD as user replacable, it may cause warranty issues.  I have not seen any comments from anyone who has upgraded their SSD and subsequently had to have service.

  • My hard drive crashed! How do I replace the hard drive?

    My mid 2010 MacBook Pro 13" started making a horrible skipping/clicking noise when I insterted a disk. It wouldn't eject the disk so I powered it down to restart it, but when it came back on, all that appeared was a grey screen with a flashing file folder and a question mark in the folder. I read that this means my hard drive crashed (I tried holding C upon restart and the 2 or 3 other tips they gave me with no luck.) I having been looking through the forums to see what type of hard drive I need to replace it with, and found my answer...but, I am wondering if those hard drives come with the operating system? Do I need to purchase one and put it onto the new hard drive BEFORE installing it in the computer? Sorry if these are silly ?'s I am not technologically savvy at all!

    It seems your had drive has passed away too.. It means you loose all your data  you haven´t backed-up.
    Chaging the hard drive is very simple, all you need is a new hard drive, internet connection for download the system again, and two types of screw drivers: A very small Philips and a very small Star screw.
    The how to you find in page 37 of the manual:
    http://manuals.info.apple.com/MANUALS/1000/MA1528/en_US/MacBook_Pro_13inch_Mid20 10.pdf
    After you install the new SSD or Hard Drive you have to install the system. To do that push the power button and hold the "OPTION" key on until a small menu to connect wireless network is shown.
    Log on your wi-fi and it will start download the installer of the system. All you need is install the system again, and re-download all your apps even ones you boght in APP Store.
    Hope it helps.!

  • Which is the best operating system to update my MacBook Air?

    I've just invested in a brand new MacBook Air, and I'm wanting to get the best out of it, so is it worth updating my OS? and if so which is the best to buy? Thanks

    Apple products always come with the latest. Just set up yopur system, and the run software updates to get any late changes from Apple. iLife 2011 is also included with your MBA. If the question you are actually asking has to do with other software versus OS, that is a much bigger question, and would be dependent on what you intend to do with the system.
    On January 6th, the Mac App Store will go live, and make it very easy to find and load software.

  • Can I upgrade my solid state hard drive on an air?

    I have a 128 Gig Air. Can I swap out the solid state drive and increase storage to 256 Gigs?

    When you are interested in actually doing it, you can buy from OWC, Here.
    They also have videos that guide the installation of such.
    Understand that it is an unanswered question as to whether the upgrade might violate Apple's warranty policies on your machine.

  • Can I update my 2009 iMac to solid state hard drive?

    I have a 2009 version iMac and am thinking about replacing its hard drive with solid state drive. Inspired by my new MacBook Pro with solid state drive.

    I am assuming that your backup is the one provided by Time Machine to an external USB HDD that is attached to an AirPort Extreme base station. If that is the case, then yes, you can restore your data from this Time Machine backup. The easiest way to do so is to use OS X's Migration Assistant, and then, choose the Time Machine option.

Maybe you are looking for