In the top right corner it says not charging

what dos it meen

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Similar Messages

  • Can anyone help me sync my iPad to the mp3 CDs that I loaded to my computer? The only thing that happens when I plug my iPad to my computer is a message in the upper right corner that says "nnot charging".

    I am having a problem getting my iPad to sync to my iTunes account on my computer. Any suggestions?

    you will need to open up itunes and then select your iPad to pull up your iPad summary, at the top you will see the different catergories for syncing content to your iPad just check the box for what you want to sync to your iPad then hit apply or sync. Here are the step by step instructions for syncing iOS devices, http://support.apple.com/kb/HT1296

  • HT1386 I have iTunes (up to date) and an iPhone 4s. When I connect it using the USB cable it does not appear in the top right corner. Other devices do and also the cable is fine as it charges and the PC sees it as a device. I've looked online and have no

    I'm new to this and I think I typed a long heading!
    Anyway the issue is I have iTunes and just updated it to the latest. I also have various Apple devices however my iPhone won't sync with iTunes. When I connect it using the USB cable it does not appear in the top right corner as does other devices. The cable is fine as it charges and also my PC sees the device. However it does not appear in iTunes so I can't sync music to it.
    I've searched the web but all asume iTunes can see the device.
    Help!?

    Hi David,
    If you are having issues with your iPhone not being recognized by iTunes on your Windows machine, you may find the troubleshooting steps in the following article helpful:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Regards,
    - Brenden

  • How can I get rid of the "E" signal on the top right corner of my iphone? It's suppose to say 3G.

    What does E means on the top right corner of my iphone?...how can I remove it & replace with 3G.

    EDGE is an earlier technogy for cell data that is still used. If you are in an area with no 3G available or a very weak signal it will switch to E. you can try Resetting your device by holding down the sleep and home buttons, ignoring the red Off slider, waiting for the Apple logo then let go of the buttons. If that does not work you will need to relocate to an area with a stronger signal.

  • Macbook air 2012 not displaying icon on the top right corner

    hi guys
    as the title, my macbook air isn't displaying icon on the top right corner. for instance, my volume icon and wifi icon disappear. furthermore, ocaasionally there some flashes on my screen. this never happen to me before and i am reinstalling my OS 10.8 right now. Anyone know what is wrong with my laptop?

    Hi Matze_Moto,
    It should not be an issue. What you are seeing is the ability to Mirror your display to an Apple TV. If you feel that there is an issue, click on the menu to see if it is actually connected to another display. Check out the article below for more information. 
    About AirPlay Mirroring in OS X
    http://support.apple.com/en-us/HT201343
    Take it easy,
    -Norm G. 

  • HT201412 My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

    My iPhone will not respond even once it is hooked to iTunes nor will it respond when I hit the power (reset) button. The screen mentions that the system is checking for "borrowed blocks" (small writing in the top right corner).

    Are you using the charger and cable that came with the phone?
    Are you using an unauthorized third party charger?

  • Images have ? symbol on the top right corner of the thumbnail

    Lightroom 2 crashed and now the RAW images I was processing have ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
    The FAQ relating to this problem by Ian Lyons is dated - 03:39am Jun 9, 2007 Pacific refers to Lightroom and when I click on the ? no file or folder appears in red text.
    I am on a PC with XP Pro (Update pack #3)
    Any help in locating my files is greatly appreciated.
    Thank You,
    Hersul

    I've had these problems on my mac and pc.
    The ? mark appeared in the LR 2.0 Beta on some photos, and was still there in the latest Lr 2.0(bugga rather than beta). However LR found the photos and I was able to use the develop module to edit the photos.
    I am going to be really un helpful and say just ignore it and they WILL go away - to quote JL "its all fine in my system."
    The question marks have now gone. I tried the reboot, the delete plists and all the previews, I've rebooted, I compacted and relaunched the catalogs then went away for a couple of days leaving the mac on and LR running.
    into PC land.
    I frequently have missing thumbnails on my pc as well, this is usually after I have imported a chip full of photos and the pc has finished importing. Unlike my mac, the pc laptop does not tell me its finding / creating the previews.
    If I start to do other things straight after import, ie goto develop or scroll thru photos, I get the missing thumbnails and then LR2 hangs.
    It always looks good for clients when you say, hang on just gotta CTRL - ALT - DELETE and restart my expensive new program.
    I have found, as several people have commented, that being patient with lightroom does work. Allowing LR to background process the thumbnails, the previews and the like does seem to make things more smooth - ie all the ?'s gone in macland and no more blank thumbnails in pcland. Maybe Lightroom is just a sulky 4yr old that we have to feed, and wait for it to digest, then it is happy. It does seem like the database needs to process to work properly, Hey adobe, if this is the case, can we have a progress meter for this please.
    It seems that LR just needs to think about our photos... for a few days... i've only got 44,000 on my server so importing catalogs of the days work from the pc or chips does mean the "dreaded whirly umbrella of impatience" that spins when I select 3 photos or press Develop or bakc to Grid or Export or Stack or .... and it often spins for a long while.
    So the ? on thumbnails and the photos actually being found and able to be edited is just an annoyance, another annoyance, especially after spending more than the US citizens on an upgrade and there being more bugs than the beta.
    The blank thumbnails on a pc is just as frustrating, at least the database seems to be robust enough to allow CTRL- ALT - DELETE several times an hour.
    Still, i like LR, though bibble 5.0 pro looks interesting, bloody messy interface though....
    Maybe this version of lightroom is the bugga, the previous was the beta and we will get a LR2.23 which will be LR 2.23 brilliant.

  • Does a sports camera positioned beside the top right corner of iPhone4 cause interference to GPS?

    I rarely experience inaccurate tracking on Sports Tracker app though I did experience it the other day.
    Since buying my HRM2 (for iPhone 4) I no longer run the myriad other GPS tracking apps on my iPhone. However, while out on a ride I discovered ST was not tracking well, so decided to simultaneously run a couple of apps. Another also experienced tracking problems.
    I decided to remove the iPhone from the ST bike mount and put it in my back pack. The tracking issue resolved itself.
    I was operating a sports camera on my bike at the time. It was located right beside the top right corner of the iPhone. On another bike, the sports camera is positioned differently (forward and lower of the top left corner) and I have experienced no problems with tracking. Could it have been causing interference on this ride due to its position?

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • Images have ? symbol on the top right corner of the thumbnail  what does this mean and how do I remove it?

    Q - My images have a
    ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
    A - The
    ? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
    Click the
    ? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
    As you'll quickly realise, clicking the
    ? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
    Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
    On the Mac you should
    Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
    Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
    Choose button and allow Lightroom to do its stuff.
    The method described above also applies to the PC version although the dialog is called
    Browse for Folder and the
    Choose button is replaced by
    OK.
    You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
    A tutorial demonstrating above can be found
    Here

    Q - My images have a
    ? symbol on the top right corner of the thumbnail what does this mean and how do I remove it?
    A - The
    ? symbol is used to identify a file that Lightroom can no longer access; probably because it has been moved using OS drag/drop or Move command rather than Lightroom.
    Click the
    ? symbol will cause a small dialog will appear. This dialog will provide information as to where the file was originally located along with an option to find (Locate) it again.
    As you'll quickly realise, clicking the
    ? symbol is fine for finding individual files that may have been relocated, but not for large numbers. There must be a better way
    Look at the Folder panel (left side of Library module) and you should find that the folder/subfolder containing the files that Lightroom can no longer find are shown in Red text. It is the red text that Lightroom uses to help you identify a folder/subfolder that contains files that it has lost track off.
    On the Mac you should
    Ctrl-click (right-click when using two button mouse) the folder/subfolder, a pop-up menu will appear. From the pop-up menu choose the command
    Locate Missing Folder, a dialog should appear. The dialog gives you access to every hard disk connected to your computer or CD/DVDs if they're in the tray. Use this dialog to navigate to the location where the folder is now located, then select this folder (not the files). Finally, press the
    Choose button and allow Lightroom to do its stuff.
    The method described above also applies to the PC version although the dialog is called
    Browse for Folder and the
    Choose button is replaced by
    OK.
    You can avoid getting into a situation were Lightroom looses track of your folders/subfolders by using a variation of above.
    A tutorial demonstrating above can be found
    Here

  • Shift icon in the top right corner of screen? Help please

    Hey everybody, I have a question here. I've been getting a random problem on my curve 9310, and was wondering if anyone else had the problem or knows how to fix it. In the top right corner of my screen there's an icon, and it looks like its the shift/caps key icon, just aA^ (up arrow). The touchpad works, and I can scroll around, but the touchpad button or the enter button to open an application does not work, nor do any of the other keys. If I pull the battery and restart the phone, its still been doing that, and if I don't touch it and the screen fades to black, when I touch the buttons, its like the phone is off. I had this problem earlier in the week and it fixed itself, but its been doing it again. Any ideas on whats causing this, or how to fix it? Any help would be greatly appreciated.

    Hi chris644 and welcome to the BlackBerry Support Community Forums!
    This icon in the top right corner you are seeing indicates that the caps lock has been enabled. If you press the shift button again, this should remove the icon from the top of the screen.
    Thanks.
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • HT1491 icon "store" in the top right corner... please help !

    when I open settings-sounds, I don't have icon "store" in the top right corner... can someone give me a hint about this? I am from Croatia, can this maybe be the reason? I updated to the last iOS 6.1.3.
    Thanks in advance

    Thank you for your help, I tried this, but it is not showing up there any other suggestion? maybe in some other settings somewhere?

  • Why do the minimize, maximize, & close buttons in the top right corner disappear (turn to a black void) unless FF is maximized?

    I am running Windows 7 on my new laptop. When I bought it back in August, I installed Firefox version 5 (I think) Now that I have updated to version 6, the minimize, maximize, & close buttons in the top right corner disappear when the window is not maximized. It becomes a black space where the buttons should be.

    Hi Kossa,
    You can also check if the issue occurs in
    Clean Boot. If the issue disappears in the Clean Boot environment, you can continue to narrow down which entry is causing the issue.
    Besides, uninstall it and re-download
    a fresh copy of FireFox to check the result. If the issue still exists, create a new user account to see if it occurs.
    If the issue persists, you can contact Mozilla Support directly and use Internet Explorer (IE) during the time.
    J
    Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise,
    regarding this product's performance or reliability.
    Regards,
    Linda

  • Quicktime seems to be showing FPS in to the top right corner of any media

    Glitchy stuff happening last couple of days.
    Any files I play in Quicktime are showing a yellow/red number in the top right corner while I play them. I assume this is frames per second display. The question is: Why the heck is this happening?
    The same thing is happening in Safari Top Sites. This is very weird and something is not right.

    I have discovered the culprit. I use an app called ATI Tray Tools to enable some functionality on the card (that I think Apple should be including..). For some reason this app enabled an FPS display for media. I have it disabled now.

  • My imovie app has disapeared towards the top right corner of my desktop screen and I don't know how to get it back?

    I don't know why but somehow my imovie has dissapraed off my desktop when I want to be working on it. When I click new project at the top of the screen the file then reappears from the top right corner of my creen but does not fill my whole desktop. I then click on a name for a new project and then the app just disspears again inot the top right corner of my screen and I do not know how to get it back? This is is the first time this has happened.

    Your's may look more like this...
    ...if you're running Mountain Lion. I'm in clamshell mode right now, so I don't have any mirroring options. AFAIK, there's no more "Show displays in menu bar" in Mountain Lion.
    Clinton

  • Errors (-50) occured when i was using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in my iTunes application on my computer.

    errors (-50) occured when i was using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in my iTunes application on my computer.
    what is it?

    Quoted from the link I provided you with, in your other post.
    These alerts occur due to timeouts or conflicts trying to write a file during download.
    If you encounter this issue while accessing iTunes Store:
    See iTunes 9: "One Moment Please" or "Error (-50)" message when accessing iTunes Store
    If you encounter this issue while while downloading something from the iTunes Store:
    Delete your iTunes Downloads folder, located in:
    Mac OS X:
  ~/Music/iTunes/iTunes Media/Downloads   Note: "iTunes Media" may appear as "iTunes Music. Also, the tilde (~) refers to your Home directory.
    Windows Vista:
  \Users\username\Music\iTunes\iTunes Media\Downloads\
    Windows 7:
  \Users\username\My Music\iTunes\iTunes Media\Downloads\
    Windows XP:
  \Documents and Settings\username\My Documents\My Music\iTunes\iTunes Media\Downloads\
    After locating your iTunes Downloads folder:
    Quit iTunes.
    Delete the Downloads folder on your computer.
    Open iTunes.
    Choose Store > Check for Available Downloads.
    Enter your account name and password.
    If you encounter this issue while while downloading Digital Copies using Windows:
    Use MSCONFIG (directions for Windows XP and Windows Vista/Windows 7) to disable conflicting software.
    If using MSCONFIG steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict.
    You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to reoccur.
    If you are able to isolate the issue to a particular third-party software, you may wish to contact them to let them know of the conflict.

Maybe you are looking for

  • TO run a program everyday.....

    Gurus, I have created a simple program and now want to execute that everyday at a particular time. What is the best option for doing that? This program inturn triggers the process chain at specific days. When I am trying to create a variant it says t

  • SMD Tool. No change pointers log on table CDHDR nor CDPOS.

    Hi everyone. I'm trying to use the SMD tool. I've created my Message Type, and my Change Document Object(Tcode SCDO). Priorly, I've tested the ALE Layer configuration, by sending iDocs of my message type directly with the MASTER_IDOC_DISTRIBUTE Funct

  • Calender: How to remove time tags?

    Since Mavericks, Calender automatically adds a time tag to individual events in the "Week" view - this is annoying because it uses up a precious line.... How can I remove this? Thanks for ideas....

  • Runtime error while add .Controls.Add("AcroPDF.PDF.1", "AcroPDF1", since update to 11.0.07

    Hello, since I update Adobe Reader from 10.1.9 to 11.0.07 my old little vb6 PDF-Viewer get an Runtime error by add .Controls.Add("AcroPDF.PDF.1", "AcroPDF1", frmMain) Error -2147417848 (80010108). What is change in the Reader-installation or what is

  • Photo info

    Aloha, I maintain an online photo album of pictures from hikes that my friends & I go on. Last weekend, a friend gave me some pictures that he took with his new iPhone 3Gs. When I put them into my software (Jalbum.net), all of the technical informati