In the XI Szenario i cannot assign Adapter Engine in Communicationchannel

Hi There,
i have a new problem. I imported now the whole Scenario from my XI Cons System into the XI Prod System.
After that i have to reconfigure the Communication Channels.
URL etc.. but in Prod System i cannot Assign Integration Server to Adapter Engine..
i maked a screenshot so you cann see what i mean:
(If you cannot see the screenshots.. please provide me a Mail Adress.. then i can send them to you)
This is our Consolidation System:
http://img16.imageshack.us/img16/7546/xik1.jpg
You see what i mean in the read mark.
And here you can see our Prod System.. i cannot Assign here the Integration Server...
http://img14.imageshack.us/img14/4581/xip1g.jpg
Can you tell me whats wrong here?
Thanks
Bjoern

Hi,
please check this threads, this may help you
Can not select Integration Server for Adapter Engine in File adapter
No Integration Server under Adapter Engine at Communication Channel config
Regards,
pradeep A.

Similar Messages

How to increase the waiting time for response in Adapter Engine not in IE

Hi Experts,
It is a SOAP to Proxy Synchronous interface. SOAP system is sending the request to PI, PI sending the same request to ECC system, After execution of some logic response back to PI in 7 minutes. In ABAP Stack(sxmb_moni) processing the response message also successfully with success flag after completion of these 7 minutes. But exactly 5 minutes later getting the error at Java Stack RWB- in communication channel monitoring i.e
com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.engine.interfaces.messaging.api.exception.MessageExpiredException: Message bd2bf8d0-b2c2-11e0-c383-001cc4fb5cb7(OUTBOUND) expired. We have set the "runtime-HTTP_TIMEOUT" parameter as 3600. thats why in Integration engine it is processing successfully.
kindly suggest me how to increase the waiting time for response in Adapter Engine. Exactly after 5 mins getting the above error in rwb, but in Integration Engine getting successful flag after 7 mins until then it is waiting for response with status flag Log version.
Thanks & Regards,
Srihari.

Hi,
Please see
How To... Investigate Timeouts In Synchronous XI/PI Scenarios
It will answer all your queries
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747?QuickLink=index&overridelayout=true

Cannot see adapter engine messages in message monitoring

hi guys,
i cannot see my adapter engine messages in message monitoring for my http to RFC syncronous scnenario.
i can however see the integration engine messages and can also see the receiver RFC channel in communication channel monitoring

Hi
this link ll help u in it -
Adapter Engine monitoring is provided in detail. Try as mentioned
http://help.sap.com/saphelp_nwpi71/helpdata/EN/7c/14b5765255e345a9e3f044f1e9bbbf/frameset.htm
Regards

What is the max file size that a Adapter Engine [J2SE] can handle ?

We are having a scenario where a 4 GB compressed file needs to be sent across without mapping, I'm trying to explore the possible options to tackle this scenario.
Some of the options, we are considering :
- Sending a file from one Adapter Engine [J2SE] to another Adapter Engine [J2SE] bypassing PI. Adapter Logs will be monitored. What is the maximum file size that can be then handled assuming a standard installation ?
- What is the max file size that Adapter Engine [J2SE] can send through PI without mapping?
Any help with the above options or with any other possible solutions to handle extremely large file transfers will be much appreciated.

Hi,
j2se is not a good option here
if you have 4gb then you need a copy solution
a) build an proxy that will just copy the file from sender dest to receiver
b) build an adapter that will do the same as proxy)
this way processing of this message will be controlled with SAP PI/XI
it will be as quick as copy & paste of the 4gb file
I did the a) for one of the flow for 300 mb and it works perfectly
Regards,
Michal Krawczyk

What are Task assignment adapter and Task Assignment Rule?

What are Task assignment adapter and Task Assignment Rule?

Task assignment adapter lets you return a value to the type and assignee values in the adapter. You can use these to dynamically assigned to users or groups.
Task assignment rules let you specific the priority in which the assignment rules are done. If you go to any process task adapter and open it. Go to the assignemnt tab. Here is where you can specifiy your rules to create an order of determination. You can have multiple entries with rules determining organization and then have them assigned to appropriate groups in each assignemt rule entry. Or you can dynamically assign by using the default and a task assignment adapter to figure that out.
-Kevin

How to set main host for Adapter Engine in the HA enviroment

Hi, all.
Our XI env. is like the following.
XI 3.0 SP11 on Windows 2003 + SQL Server.
Central Instance(ABAP + J2EE Addon) is running on Host A,
Dialog Instances(ABAP + J2EE Addon) are running on Host B and Host C.
Our design was to have J2EE Adapter engine mainly running on Host A(CI). But after installation, Adapter Engine is running on Host C(one of DIs). When we check from the Runtime WorkBench. It shows Adapter Engine is running on Host C while IS is running on the Host A(CI).
Where can we change this configuration? We want the J2EE AE running on the Central Instance Host.
Any advice appreciated.
Best Regards.

Hi Sejoon,
when we changed the host of XI server in one of our projects one of the things we had to change was the exchange profile entries
http://server:port/exchangeProfile/index.html
to see how your adapter engine is configured
http://server:port/sld
SLD -> Content Maintenance
then
Subset: landscape description
Class: XI Adapter Framework
buth check the exchange profile entries first
Regards,
michal

XI 3.0 -- Local Adapter Engine

Hi all,
I can sent the file of my local PC to the XI 3.0 by using the local adapter engine of XI 2.0. But I can't do it by using the File Adapter Communication Channel in XI 3.0.
In my XI 2.0 local adapter engine, I startup the RUN_ADAPTER.BAT in my local adapter engine folder. And create the file_inbound adapter: File_2_M47 as:
## file adapter java class
classname=com.sap.aii.messaging.adapter.ModuleFile2XMB
mode=FILE2XMB
Integration Engine address and document settings (example, see docu)
XMB.TargetURL=http://10.37.217.65:8000/sap/xi/engine?type=entry
XMB.User=xiuser
XMB.Password=xipass
XMB.SenderBusinessSystem=FILE_SYSTEM
XMB.SenderInterfaceNamespace=http://trevorecc5.com/xi/file
XMB.SenderInterfaceName=ZMI_SO_IDOC
XMB.ContentKind=B
#XMB.ContentKind=T
XMB.ContentType=application/xml
#XMB.ContentType=text/xml
#XMB.ContentType=text/plain
XMB.QualityOfService=EO
##File Adapter specific parameters (example, see docu)
file.sourceDir=C:/filetoidoc
file.sourceFilename=.
file.processingMode=setAttribute
#file.processingMode=delete
#file.processingMode=archive
#file.archiveDir=c:/temp_archive
file.pollInterval=20
##xml conversion properties if mode FILE2XMBWITHROWCONVERSION specified (example, see docu)
#xml.fieldFixedLengths=15,25
xml.processFieldNames=notAvailable
xml.fieldSeparator=;
Note: The IP address (10.37.217.65 ) is my XI 3.0 server.
I can send the file of my folder - C:/filetoidoc.
I have configured the Comunication Channel in XI 3.0.
And the related parameters like as:
Comunication Channel: CC_FILE_IDOC
Service : FILE_SYSTEM
Adapter type : File
 : Sender
Transport Protocol : File System(NFS)
Message Protocol : File
Adapter Engine : Integration Server
Source Directory : C:/filetoidoc
File Name : .
Quality Service : Exactly Once
Poll Interval : 20
Processing Mode : Set to Read-Only
Empty-File Handling : Do Not Create Message
Process Sequence : By Name
File Type : Binary
Status : Active
The sender comunication channel CC_FILE_IDOC has been assigned to the sender aggreement /File_System/ZMI_SO_IDOC/ of namespaces: http://trevorecc5.com/xi/file
But it can't work!
I don't know how to configure the file adapter Comunication Channel for my sending in XI 3.0.
Any help is appreciated.
Regards,
Trevor
Message was edited by:
 Trevor Zhang

Hi,
>I think the XI 2.0 local adapter engine is more useful than the XI 3.0 comunication channel.
I ve never had the opportunity to work on XI 2.0 but the difference lies in the entire architecture of the Adapter Engine in XI 2.0 and XI 3.0
While XI 2.0 had the adapter Engine as a J2SE based engine, XI 3.0 is based on the J2EE framework and thereby allows more features including modules , and also supports different types of adapters and custom developed adapters as well.
There is no real difficulty in configuring an adapter in XI 3.0 but ofcourse one should take in mind that the network level details should be beyong an XI developers job role.
You need to look at the fact that the problem you are facing is not because XI 3.0 adapter has some problem, but rather because you seem to have network restrictions!!
Regards,
Bhavesh

Alert for adapter engine error

Hello experts
We have configured the alerts for the adapter engine errors .We have configured the variable &SXMS_TO_ADAPTER_ERRTXT& element which is having the CHAR70 type for getting the adapter engine error text in the alert inbox.so for any adapter engine error greater than 70 chracters ,it is getting truncated to 70 chracters only.but we want to have the whole adapter error log text.
Can anyone please throw some light on this.
Thanks
sabyasachi

Moha,
It seems that it cannot support more than that.
Problem with Alert Text
Re: Message Size in ALERTS
It is worth taking a look at this blog:
/people/community.user/blog/2006/10/16/simple-steps-to-get-descriptive-alerts-from-bpm-in-xi
Regards,
---Satish

Multiple adapter engine URL's found

Hello,
In the integration directory, when we tried to add a communication channel or change a currently existing communication channel we get an error " Attempt to determine which Adapter Engines are affected by data changes failed". We did a cache refresh and in AE runtime cache we find the AE name changed to "CA" with a new adapter engine name. The default was "AE" with the adpater name blank. Also in the cache notification of ID there is an "Unknown error" in red and in the cache instance we find 2 adapter engine instances.
Where can we find the actual adapter engine set up for the integration server ?? and How can we revert back to the original settings??
Any help is appreciated.
-krishnan

Hi Murugadass,
This link provides all details pertaining to adapter engines, expand them further to get information
http://help.sap.com/saphelp_nw04/helpdata/en/8f/d906d01f77fa40a4c84683c3f8326f/frameset.htm
Also have a look at this thread:
No adapter engine when Adapter type as File
Hope these help and do not forget to assign points for helpful answers!
Cheers,
Chandra

Use Adapter Engine of another XI system (Decentralised Adapter Engine)

In order to create a workaround for a specific problem, I'm investigating the possibility to attach the Adapter Engine of a second XI system to a productive XI system. The outcome should be that the productive XI system has access to two Adapter Engines: one central and one decentral.
1. is this possible at all?
2. if yes, can you provide some pointers on how to proceed?

Hi Iddo,
Adding a "new" decentral adapter engine on a separate hardware to an existing central PI system is not that hard, but as Stephan said, you cannot do that with an adapter engine of a different full XI installation.
I assume you want to use the decentral adapter engine, while upgrading/patching the decentral one? One customer of mine does that kind of switching of scenarios regularly when applying patches to one of their adapter engines (set up central integration engine with one central and 2 decentral adapter engine). It's possible, but a little bumpy sometimes.
Anyway be aware that in case of an update/patch of the central integration server your decentral adapter engine cannot make any cache refreshes to any adapter engine.
Best regards
Sebastian

PIRWBUSER / not enough Permissions / SLD Registration / Adapter Engine / PI

Hi Community,
i have a Problem. I go to the SLD Registration in the RWB
When i click on Adapter Engine and Register i become the Message
Adapter Engine P11 (HOST): Unable to get Adapter Engine instance and read the data from SLD; details: Cannot connect to component Adapter Engine P11 (HOST); user PIRWBUSER does not have sufficient authorization to call servlet at URL http://HOST:50000/AdapterFramework/regtest.
My PIRWBUSER has the following Roles:
SAP_SLD_CONFIGURATOR
SAP_XI_RWB_SERV_USER
SAP_XI_RWB_SERV_USER_MAIN
Can someone help here?
Regards
Bjoern

Hello!
Apply the note below according to your system version:
999962 - PI 7.10: Change passwords of PI service users
936093 - XI 7.0: Changing the passwords of XI service users
721548 - XI 3.0: Changing the passwords of the XI service users
If not worked, try working with the SAP_ALL and check if works.
Regards,
Caio Cagnani

Help!Cache status of object for Central Adapter Engine is incorrect

this problem cconfused me several days!
version:PI 7.1
after i activate the communication channel, the cache not update for central adapter engine
problem: in cache status overview, the update for central adapter engine not yet started, but notification is ok.
the update for integration server and mapping run time are all correct.
then when i display wsdl for sender agreement(SOAP sender), show message:Cache status of object abcd123 for Central Adapter Engine is incorrect
if i ignore this message, error message popup:dapter Engine af.xid.sapittest for communication channel abcd123 not registered in SLD
who can help me solve this problem.
thank you in advance.

Hi cheng,
Kindly check if you have set theparameter 'com.sap.aii.connect.integrationserver.sld.name' in your
Exchange Profile, since it's not set by default. Open note #1278563 and follow the procedures.
And you may check the following notes:
#1031321 - Self-Registration of Adapter Engine and RWB fails
#1334053 - No automatic PI 7.10 SLD Registration (Here you'll see the note 764176 which you have already applied and also the note #1117249).
In RWB, is the adapter Engine "red light"? If yes, what is the specific error?
Regards,
Caio Cagnani

Shutdown of XI 3.0 Plain J2SE Adapter Engine.

How do I shutdown the XI 3.0 Plain J2SE Adapter Engine? Where should I go to do this?
Regards,
N.S

Hi N.S. -
If I recall correctly, you open a browser to http://<host>:8200 . 8200 is the default port. If not using the default port, you may need to investigate what that port is. Delivered initial user/pwd is sap/init.
There's a Shutdown Adapter Engine option once you get in. Of course, the j2se adapter engine must be running in order for you to do this.
Regards,
Jin

Archiving message in Adapter Engine in XI 3.0

Dear all,
Could you please explain the procedure of Archiving Messages in Adapter Engine in XI 3.0.
I have read many blogs regarding deleting messages in Adapter Engine, but nowhere i can see about Archiving.
I have been told that activating and scheduling "Default Version Archive Job" in RWB->Components->Adapter Engine->Background Processing would solve the purpose.
But while activating, i am unale to set rules, as it gives error " Rules are not allowed for jobs with set 'archive edited messages only' flag."
Thanks and regards

Hi,
Please check the [link|http://www.****************/Tutorials/XI/Archiving/Index.htm]
Also check this
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50?quicklink=index&overridelayout=true
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=147266890
Regards,
Naveen.

Error in Local J2EE Adapter Engine

Hi All,
We configured the J2ee Adapter engine and did the design and Configuration part also.but while testing the scenario it's giving error in SXMB_MONI as
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=BS_LAE;TS=BS_LAE;AN=MI_PPS_IB;ANS=urn:pps.com;</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anyone suggest me?
Thanks,
Kalyan.

Hi kalyan,
If the error still says that, "Failed to determine a receiver agreement for the given message" - could you please compare the Sender/Receiver party/service determined in the XI message header and that in the Receiver Agreement in ID? Also please check the same for the Receiver Interface and Namespace. receiver agreement not found means any of these values doesn't match. If these look fine.............can you provide us with few more extra information...........like at which pipeline step in MONI you getting the error - the message hasn't yet reach Adapter Engine. So I don't think it's a problem in AE.
Regards,
Suddha

In the XI Szenario i cannot assign Adapter Engine in Communicationchannel

Similar Messages

Maybe you are looking for