In Thunderbird while trying to move conversation results to an archive folder; if some of the results are already in the folder it will not move any.

Hi. I often use the conversation search option when archiving my emails from inbox. I find this a very useful method of finding trails where I and multiple people have responded to each other. However If I have already moved one or more of these emails into the archive folder and select all to move, Thunderbird will not move any. I then need to individually select those that need to be moved.
Although not a major issue I use this regularly and often come across the problem. a recent fix which allows location tab to remain on in search helps but does not resolve this issue. A slightly annoying problem and I was wondering if any one else has this issue. Also is anyone looking into a solution?

FCPx answer: At least the answer that worked for me...
I had the same problem, as I believe many others had.
In my case the problem was with one of OSX Mavericks' new features: APP NAP.
It looks like this is ON by DEFAULT for ALL Applications and that FCPx, or Compressor for that matter, will not work if this is enabled on them.
I just disabled App Napp on FCPx and now it works, again, like a charm.
This is how you disable App Nap: http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/
I hope this helps,
Mariano

Similar Messages

I have made an imovie on my ipad and for some reason the final edit will not keep. When I open the actual projct to edit, it is the way I want it, but when I look at the actual movie

I have made an imovie on my ipad and for some reason the final edit will not keep. When I open the actual projct to edit, it is the way I want it, but when I look at the actual movie and what loads up to youtube is the version prior to this final fix. I have tried fixing it at least twenty times. The open to edit version has the video the way I want but when I upload it to youtube, its not the version I want to show.

Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do.

DVD Drive will not recognize any movie DVD disk in the drive - thus will not play any dvd movies.

HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there. It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies. I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive. Computer is out of warranty.

Hello crollinsphoto1, welcome to the HP Forums.
It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
I'd recommend starting with this document:
Resolving DVD and Blu-ray Movie Problems (Windows 7).
Also, are these purchased DVD's or burnt DVD's?
Do the movies play in other sources? (DVD player, other PC)
Let me know how this goes.
Thanks.
I worked on behalf of HP.

Acer Aspire E5-511. touchpad/mouse move cursor but will not open any programmes other than McAfee,

Just purchased this laptop, initial thought it was a great improvement on my 3 year old Aspire!!! Latest problem after doing a complete scan with McAfee is the touchpad or remote will move the cursor but will not open any programmes other than McAfee. The Windows symbol (bottom left hand corner) does not light up when the cursor is over it and I am unable to use windows key + C to get charms bar. For background I have been unable to install windows updates since I have had this computer, two days, hence doing a scan to look for reasons.

Thanks for your suggestion Acer-Justin. Sorted it by a switching off/reset using keyboard. Sorted update problem using Microsoft who found a problem with update system then installed Windows 10 - all appears ok for now.

I got the Mac error code -36 while trying to move a backup file

I got the Mac error code -36 while trying to move a backup file (made by Time Machine) to another drive. The full text of the error message is:
The Finder can’t complete the operation because some data in “boot.efi” can’t be read or written. (Error code -36)

It's a disk error. Although Apple documentation says you should be able to copy Time Machine backups in the FInder, that doesn't necessarily mean it will work. I suggest that, instead of copying the existing backup, you start a new one on the other drive, and keep the old one. You need more than one backup anyway.

Error -36 while trying to move files on SMB mounted NAS

Hey,
I have been experiencing an error -36 while trying to move files around on my NAS.
I have the feeling it has something to do with insufficient privileges that are being acquired.
When mounting in windows explorer no problems arise.
When using the mac mounted disk in Parallels same problem.
Mounting disk in mac as following:
smb://login:password@ip-address/NAS-mount
or
smb://ip-address/NAS-mount (after which login details are prompted)
Any help or suggestions are welcome,
Jan

Hey,
I tried CIFS but that is giving me the same error -36.
I think it must have something to do with finder permissions as windows explorer is handeling it just fine.
Any more suggestions?
Tried:
cifs://login:password@ipaddress/share
cifs://ipaddress/share

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store

While trying to instal Mountain Lion OS on my macbook pro, I got the error message that my HD was damaged and it reverted to my Lion OS. Why does this happen? I bought the OS online through the app store.

The Mountain Lion installer looks at your internal drive to make certain that it's error-free before continuing installation. You should have an application named "Install OS X Mountain Lion.app" in your Applications folder now so you shouldn't have to download it again. Do this...
Boot to your Lion recovery partition by holding down both the Command and the R keys while booting. Open Disk Utility from the Recovery partition and select your hard drive (usually named "Macintosh HD" unless you've renamed it) and click on Verify Disk. If you come up with any errors, click on Repair Disk. At the end of the cycle you will get a message that the disk was successfully repaired or a message that the hard drive could not be repaired.
If you're able to repair the disk, just reboot as normal and open the "Install OS X Mountain Lion.app" and the installation will proceed. If Disk Utility was unable to repair the disk, you need to get to your local Apple Store as soon as possible so that they can see if the disk is salvageable or beyond repair.
Good luck,
Clinton

TS2972 I have 46 movies downloaded from apple on my windows 7 PC I can only see 32 of them on my apple tv, I keep trying to share on my computer but they will not connect, any ideas?

I have 46 movies downloaded from apple on my windows 7 PC I can only see 32 of them on my apple tv, I keep trying to share on my computer but they will not connect, any ideas? Sometimes I can connect though computer and get all my movies but usually I can not connect though the network.

thank you Diesel vdub this helps but I just need to clarify - I understand about copying the intire folder ( cool thanks ) for the second part though, you are saying I can not do this if the 2nd computer does not have internet access? ( which you seem to be saying - bother! )
many thanks
Glenda

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

I have 2 ipod touches. I backed up the new one with old's info. The old one will not unlock with the password I had wrote down and I tried my new ones password. How can I reset the old ipod without affecting the new one and how can I unlock the old one?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

DVD Drive will not play ANY movies

I seem to have the standard drive for the 15 inch MacBook Pro (bought less than one year ago), but it simply will not play ANY movie DVD I've tried. It whirrs and whirrs but nothing happens. I've tried multiple movies and none have worked. Yet it works fine with software cd's and loading on of new programs, and burned CDs with pictures display just fine. I checked the System info on the drive and notice that the last line - which is media - had a 'no' next to it. Is it not turned on or programmed to play movies??? If so, how do I activate it? Thanks for any help.

My MBP plays DVD and says no also, so that is not it. Sounds broken to me. Call Applecare and I do hope you paid for the 3 year Applecare. Did it EVER play DVDs?

I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen. The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

I am trying to download a video from the BBC iplayer and the downloader helper will not start. How can I solve this problem

I am trying to download video from the BBC iplayer and the download helper will not start. How do I get it to start?

No, this reply is not helpful. It simply generates this little gem:
"This service requires the conversion feature to be enabled.
Configure conversion ?"
And the same clicking on buttons that makes nothing happen and going around in circles with the escape key.

Hello I have 2 seperate airport express systems on my network, each connecting to a stereo in a different room. suddenly, the one in the living room will not stop flashing amber, but the one in the bedroom works fine. I have already tried resetting it

Hello
I have 2 seperate airport express systems on my network, each connecting to a stereo in a different room. suddenly, the one in the living room will not stop flashing amber, but the one in the bedroom works fine. I have already tried resetting it with a pin, resetting it while plugging it in, and trying to find it in airport express setup (the setup assistant can't find it at all).
What am i doing wrong?

How do I configure the AX to connect to the hub's wireless network? It will only scan one base station Airport Express at a time in the Airport Utility. I think what I am trying to do is use the hub as a router to the two AX's. Is there a specific way to set this up?
To set up the AX to join a wireless network as a "Wireless Client," using the AirPort Utility, either connect to the AX's wireless network or temporarily connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
Launch the AirPort Utility.
Select the AX.
If not already connected to the AX's wireless network, go ahead and switch to it when prompted.
AirPort Utility > Select the AX > Manual Setup > AirPort > Wireless
Wireless Mode: Join a wireless network
Network Name: <type in the network name/SSID of the wireless network that you want to join or select it from the pop-up menu>
Wireless Security: None OR, if you are using security on your wireless network:
Wireless Security: <Select the appropriate level of security for the existing wireless network: WPA/WPA2 Personal | WPA2 Personal>
Password: <enter your wireless network security password>
Verify Password: <re-enter the same security password>
Click Update to write the new settings to the AX.

HT1430 my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

my iPhone4 will not turn on or show that is working at all, i have tried to charge it so that the screen will light up but it won't work, when plugged into the computer iTunes does not show any sign it is plugged in, what do i do?

There is a hardware problem. Whether it's worth it to you to have no working phone for 2 months until you can update vs paying for replacement/repair now is a question only you can answer.

In Thunderbird while trying to move conversation results to an archive folder; if some of the results are already in the folder it will not move any.

Similar Messages

Maybe you are looking for