"In transit to final destination" - Can anyone define?

I ordered my 21.5" iMac on the 10th and as of today, my order status reads: "In transit to final destination. Carrier details will be updated shortly"
Can anyone define that for me and roughly where in the process it is?

Your question could be easily answered by Apple, you can find the phone number for the online store in the upper left corner of the store's home page. I suspect the information means it's in transit to the final destination which means once it arrives there (which is probably a local distribution facility) it will go out for delivery to you. However to be sure you need to call Apple. Then you will see the status change again. We know you're excited to receive your new iMac however this is a technical forum.

Similar Messages

IDVD keeps ejecting my disc before final burn can anyone help

My iDVD movie keeps ejecting the disc before the final burn what can I do

• Material used: Video-Codec and Photo file format and Audio file format - matters too. I use
- Video - StreamingDV .dv or AIC
- Photos as .jpg (only)
- Audio as .aiff 16bit 44.1kHz or 48kHz (ONLY - never .mp3 or directly from iTunes - all converted to .aiff first)
With this I do not mean any setting in iDVD - BUT the raw material used in iMovie / FinalCut / Avid 100 / Adobe Premiere
As this usually matters - later in iDVD
How did You Export from Video-editing program used ? I prefer
• iMovie HD6 - just drop the movie project icon (NOT iMovie Icon - the PROJECT one) over into iDVD big menu window (avoiding - drop-zones as they are for other tasks)
• iMovie'08 to '11 - Share to MEDIA BROWSER - AND AS MEDIUM - not HD or other resolution as iDVD does a bad downscaling job.
• iMovie'13 (version 10.0.x) - Share as 480p - Import this into iDVD
• FinalCut (Pro or Express) - Export as QuickTime .mov - NO QUICKTIME CONVERSION - IMPORTANT
• Adobe Premiere - I don't know - not tested Yet
• Avid 100 - I don't know - not tested Yet
Cleaning the DVD-burner - If it Burns DVDs OK then that's may be not the problem - But if it only burns CDs OK then either the DVD-burning-laser is dirty or broken.
It is very easy to kill this DVD-laser as it over-heats if one burns several DVDs in a row. I only burn three at a time - then let it cool down for 30 minutes till next batch of three DVDs.
Yours Bengt W

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please?

I am new to Final Cut Express and don't understand why I am unable to drag transitions into Canvas? Something wrong in my setup? It's not the overlays they are "on" so can anyone advise me please, by the way the "L" doesn't appear in the bottom left hand corner either? and by the way how can I get rid of that irritating Blue badge saying "AutoFill your contact details" all mine are in "address book" already!

You can't drag a transition into the canvas. If you're dragginmg a transition from the effects tab you drag it between the edit point of two clips in the timeline.
Make sure show edit overlays is turned on in the Canvas view popup.

HT4061 good morning! I just did a software update on my phone (finally) last night and now my phone will not come on. All it keeps showing is the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYone please expl

Good Morning,
I just did a software update on my phone (finally) last night and now my phone will not come on. It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further. Can ANYONE help me please???

The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.

I have finally set up a group in my contacts. Can anyone please tell me how to send an email to the entire group? running Mavericks on iMac

I have finally set up a group in my contacts. Can anyone please tell me how to send an email to the entire group? running Mavericks on iMac

Drag the entire group into the To: field of a new message. The group is in your Address Book. You've used a name for it, like My Group. You can simply start typing "My Group" in that To: field and it should appear in a context menu.

Can anyone tell me from where origin and destination countries be picked

Can anyone tell me from where origin and destination countries be picked for a vendor a having scheduling agreement
Please consider the following points.
1. I need the table names
2. Table having combination plant and vendor
Please help me on this

Hi
Originating country is vendor country , found in LFA1 table.
Destination country is the country of plant if the delivery address has not been changed manually or storage location address if storage location address is maintained.
For plant country you can get it from T001W & for storage location you will get the address number from TWLAD table for plant & storage location combination & then you can get the country from table ADRC using this address number.
Regards
Prasad

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

I am putting together a proposal for a Final Cut Pro Workstation to use with a tapeless HD camera. Can anyone suggest the best camera (in the 5-10,000 dollar range) ? What hardware and software should I include in the package?

This is quite an open suggestion, but here are some ideas which might get you started. There are good HD cameras in your price range from Sony, Panasonic and Canon (and maybe other manufacturers). Tapeless formats vary. I have only worked with Sony XDCAM which seems pretty good to me. File sizes for material shot at 35MBS are not too huge and, with the free Sony transfer and conversion programme, are easy to bring into the computer via USB direct from the camera or from a fairly inexpensive converter. The Sony XDCAM EX3 can produce results well up to broadcast quality.
As to hardware, you'll need a powerful MAC - iMac, Macbook Pro or MacPro with 4GB or more of RAM and a good video card. Softwarewise, FCPX is quite a bit cheaper than FC Studio 3 and of course it's 64bit and can make better use of multi-core machines than FCP7. It's also designed to handle HD formats with less hassle than FCP7 and is matched to the latest versions of Motion and Compressor. But you'd probably be wise to search reviews of FCPX before you make your choice - it has some issues.
A good HD monitor will be essential and, for colour correction etc, you may want to consider a second monitor or HD TV foe editing. ( A MacPro is generally the best machine to connect a second monitor to).
This should give you a good editing system, but there are many other things you could add (Photoshop, professional sound monitors, etc)
Hope this helps a bit.
Jonathan

Strange NUMC, Can anyone please Define NUMC.

Hi Experts,
I have experienced a Strange things with NUMC.
How ever you define your Numc (straight or dictionary ref like "DATA: value1 TYPE pa0000-pernr) or what ever.
I have seen different results different scenarios as shown in below example.
REPORT znumc_test.
DATA : value1 TYPE n LENGTH 6.
DATA : value2(15) TYPE n.
DATA : value3 TYPE numc10.
DATA : ltext(40) TYPE c VALUE '0##010,SHOCKING-RIGHT,02 000'.
WRITE:/ 'Test1'.
WRITE:/ value1, value2, value3.
SPLIT ltext AT ',' INTO value1 value2 value3.
WRITE:/ value1, value2, value3.
CLEAR : value1, value2, value3.
WRITE:/ value1, value2, value3.
MOVE 'Can it be done?' TO value2.
WRITE:/ value2.
CONCATENATE 'It' 'Can' 'be' 'done.' INTO value2 SEPARATED BY space.
WRITE:/ value2.
value1 = value3 = value2.
WRITE:/ value1, value2, value3.
SPLIT 'Is This Possible?' at space INTO value1 value2 value3.
WRITE:/ value1, value2, value3.
I encounter this behavior when I was uploading my CSV file using split.
Can anyone please Define NUMC exactly for me.
Output of above in my system is show below
Test1
000000 000000000000000 0000000000
0##010 SHOCKING-RIGHT 02 000
000000 000000000000000 0000000000
000000000000000
It Can be done.
done. It Can be done. n be done.
Is This Possible?
Thanks & Regards,
Dileep .C

Hi Suhas,
Thanks for your information. I did went to through F1 before posting here. But I am not impressed with explanation.
I think I might missing something, Thats why I was looking for some valuable answers from experts here.
Properties
Type = n
Length = 1 to 262,143 characters
Standard Length = 1 characters
Name = Numeric text field
Numeric text
Character string consisting only of the digits 0 through 9. Valid content of a numeric text field.
Value Ranges and Initial Values
Type = n
Value Range = Any alphanumeric characters; only valid values are the digits 0 to 9, however
Initial Value = "0" for every position
Can you explain difference in below,
DATA : value(20) TYPE n.
MOVE 'Can it be moved?' TO value. "its not working or cant be moved
WRITE:/ value.
CONCATENATE 'It' 'Can' 'be' 'moved.' INTO value SEPARATED BY space. "its working perfect
WRITE:/ value.
My Point is pretty simple, Does NUMC allows characters in it. If yes, what are the scenario's.
Please shed some light on me.
Thanks & Regards
Dileep .C

Can anyone explain origination/destination on the billing summary?

can anyone explain origination/destination on the billing summary?

The destination of a call made by the cell phone is where billing is based, if you are calling them.
For example, if I call my friend who has a NYC number and she is standing next to me here in GA and I have a MI number, The origination will show Podunk GA, but the destination will still show NYC.
Now if she calls me from GA, on my bill it will Destination, Incoming Call
Whether incoming or outgoing, on the bill, you, the line holder, are always the Origination. Look at the pic below and look at the calls from 8.5. my friend from NYC, visiting Hiram, when calling her shows NYC. Yet when she called me, it is Incoming Call
So basically, you never know WHERE the person on the other end actually is.
Hoped this helps

Can anyone explain me abt Defining Celleditor /cell exceptions?

hi all,
Can anyone send me some screen shots abt cell editor / cell exceptions ? what is it significance to my email id [email protected] can anyone explain me with an example.
regds
hari

Hi Hari,
We use <b>Cell Editor</b> when we have Complex query with two structure used to avoid the results getting collapsed,
It is very useful to resolve complex scenarios. For example, using it in aging analysis report which supports three different periods (aging by key date, aging as of last month and aging as of last year). For each row, the calculation is different based on key date, last month and last year.
How to document on Cell Editor(E.g),
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce496e17-0301-0010-e0b4-b8ca8b4588ac
URL for <b>Defining Exception Cells,</b>
http://help.sap.com/saphelp_nw04/helpdata/en/cb/89fa3a0376a51fe10000000a114084/frameset.htm
Regards,
Mani
Message was edited by:
Manikandan A

I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?

ladislavfromcygnet wrote:
Thank you Shootist007. I cannot do even Update now. I probably should have spent the same amount of money on a new IMac!
No not really. If this is a brand new Macbook Pro take it back for a refund. Apple has a 14 day No Questions Asked return policy for Full refund.
Take it back, get the Full Refund (DO NOT LET THEM TRY TO FIX IT. YOU BOUGHT A NEW COMPUTER NOT ONE THAT HAS BEEN WORKED ON OR NEEDS TO BE FIXED) and then decide whether to buy another Macbook Pro or the iMac. Or you could return it, get the Full refund and buy some other brand computer.

As i was installing Final Cut Studio i cancelled it while entering the details, to go to bed. I tried to reopen the installer window and it just comes up with a Terminal Text Window, can anyone help?

As i was installing Final Cut Studio i cancelled it while entering the details, to go to bed. I tried to reopen the installer window and it just comes up with a Terminal Text Window, can anyone help?
It may have half installed the software so dose anyone know if i can reinstall or delete what it has installed?

after using FCS remover run disc repair:
shut down the Mac
Hold the Shift key on keyboard and start up the Mac
The Mac will run the repair tasks it takes 10- 30 minutes, then it will boot up normally
insert the FCS DVD in the drive and install FCS again.

Can anyone recommend personal or class training, for Final Cut Pro in NYC?

Can anyone recommend personal or class training, for Final Cut Pro in NYC?

Try starting with the free online tutorials like Izzy, http://www.izzyvideo.com/final-cut-pro-x-tutorial/, or Final Cut Pro X TV, http://fcpx.tv/. I got started on theose a few months ago.

Can anyone give me a lit of ALL the final cut pro's in chronological order?

Can anyone give me a lit of ALL the final cut pro's in chronological order?
Thank-you

Everything you need is here:-
http://en.wikipedia.org/wiki/Final_Cut_Pro_X

Can anyone please help? Final cut Pro problem

Hi I am trying to up load video to Youtube and keep getting the following message:
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
I am no Einstein when it comes to computers. Can anyone please help? Thank you Yarders1

Can you render your project to a local folder on your computer? If you cannot, try this:
File > Delete Project Render Files
Turn off FCP, start it up again.
Try to render again. Works almost every time for me.

"In transit to final destination" - Can anyone define?

Similar Messages

Maybe you are looking for