In trying to transfer iWeb pages (not uploaded) to another computer I went into the library and transferred the domain onto the desktop. Disaster! On opening iWeb all previous (uploaded) sites have disappeared. Help!

In trying to transfer iWeb pages (not uploaded) to another computer I went into the Library and transferred the domain onto the desktop. Disaster! On opening iWeb all previous (uploaded) sites have disappeared. On opening the domain all I can recover is the many component parts, and when unzipped the code. Help! Mike

Code in a domain file - really? That is not possible because the domain.sites file does not contain any html or css code at all - the domain file is your iWeb data file and you won't see any code until you publish your website.
If you can see html code, then you have the wrong file and it is a published version of your site which iWeb can do nothing with - iWeb has no import facility so cannot open any html files.
Go back and ensure that you have the correct domain.sites files that can be found under your User Library/Application Support/iWeb/domain.sites and if you have Mavericks then you need to go to Go and press the alt key to reveal your hidden User Library, so that you can then get to Application Support and then iWeb and then your domain.sites file.
You will also need to go and download either DomainCracker or iWebSwitch which allows you to open individual domain files under Mavericks, because from Lion onwards, you cannot open individual domain files.
Also, it says that you are still using iWeb 08? If this is so, you'll either need to upgrade to iWeb 09 by going to Amazon and purchasing the iLife 09 or 11 boxed set, both of which contain iWeb 09 or you need to switch to newer software that is actively being supported and developed such as EverWeb (http://www.everwebapp.com).

Similar Messages

TS2518 I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

Every time since I upgraded this morning, attempting to open Aperture causes a crash. I upgraded to Aperture 3.4 this morning, and now it will not open at all! It crashes every time, and tries rebuilding the library and repairing most times. The Library open fine in Iphoto

If you do not have the original install DVDs, use the Aperture Trial installer instead:
Try if this download link for the trial version still works: if yes, you can unlock it with your serial number:
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Aperture/061-8328 .20101020.AprE3/ApertureTrial3.1.dmg
Regards
Léonie

Manage Sites - All my existing Sites have disappeared..?

I have recently recovered form a hard drive crash and set up a new home directory.
When I open the <Manage Sites> dialog box in Dreamweaver CS4 all of my existing sites have disappeared and the list is empty.'
If I track the path in Finder <username/library/Application Support/Adobe/Dreamweaver CS4/en-US/configuration.SiteCache> I can see that all of the sites are still listed in folders there.
Is there a way to redirect Dreamweaver to see these existing sites?
If not, can someone suggest the best way to recover from this/
Thanks

Correct - in order to keep those that are currently on the iPad they need to stay checked, and additional albums that you check will be added to those that are already on the iPad. Synced photos can't be deleted directly on the iPad, they can only be deleted by un-checking/de-selecting them on that tab.

I am using a late 2008 macbook and have recently purchased a WD Passport Ultra 1TB to use for storage. I have formatted the drive and successfully moved files onto the drive, however now I am unable to locate the drive within FINDER. Please HELP!

I am using a late 2008 macbook and have recently purchased a WD passport ultra 1TB drive to use as storage. I have successfully formatted the drive, and moved files from macbook onto it, however now I cannot locate the drive within FINDER, even though it is showing within disc utility. Please HELP!!!!

Welcome to Apple Support Communities
Open a Finder window, and your external drive should show up in the sidebar, under "Devices".
A different way is to go to Finder menu (in the menu bar) > Preferences > General, and tick "External disks". If your external drive is detected by OS X, it will show up at the top right corner of Desktop, so double-click it to access to the content.

Not only do web pages not load properly but we're doing calculus on-line and only 1 video can be viewed at a time. last week we didn't have problem. wish i could call someone. not getting any help.

a number of site say done and we see a blank page. on-line calculus class, last week could view more than 1 video at a time now only 1 can be viewed. this course need to be completed by may 3. career builders some of the drop downs aren't working. need to find a job. these are serious errors that we did not experience before. we haven't updated to 4.0. now i see the one's who have are having these problems. daughter can't gt to e-mail. wish i could talk to someone. i'm going to try the live session at 2 but i'm not a techy. can take care of most problems, but this seems beyond me. HELP
s

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

IWeb pages not updating correctly on .mac website.

I have changed one of my pages in iWeb. This page was a photos page. I tried to put a movie at the bottom of the page and it didn't work right. When you load up the page it looks like there to be a movie there but it doesn't play. So I decided to remove it. I removed it in iWeb and published the update to my .mac account. When I go to view it the movie is still posted on my website.
Anybody know how to fix this problem?

depending on which browser you use you will find it here:
SAFARI: Open Safari, then choose "Safari" from the silver-white bar at the top and choose to "Empty Cache..."
FIREFOX: Open FF, and then from the bar at the top choose "Extras" and then "Clear Private Files." then from the pop-up choose to to clear cache. do this twice.
max

All of my iWeb websites have disappeared, help please!!!

Someone please help!!
I have created some very complex websites using iWeb that took a lot of time. I turned my mac on yesterday and started iWeb in the same way that I always do and a pop up box came up saying that iWeb couldn't find the domain file. I wasn't sure what this meant at the time and hit cancel and now all of my sites have been wiped from iWeb.
After doing a bit of research I found out about the domain file. I tried to look for it on my Mac but at first it was no where to be seen. To start iWeb again I had to start a new website. It was only after this that a new domain file popped up, but it only had information regarding the new site on.
I have the sites I created published, backed up and saved. So a few questions,
1. Does anyone know why this has happened?
2. Is it possible to import my iWeb published websites back into iWeb?
3. Why is this program so under-developed, it has so much potential?!!? (You don't need to answer that one, just me venting a bit of frustration )

When you say that you have the sites you create "Published, backed up and saved" do you have your domain.sites files backed up and saved?
If not, then you are out of luck. No it is not possible for iWeb to import published websites back into iWeb. iWeb has no import facility and creates html upon publishing.
Your domain files cannot just be deleted like this, especially from iWeb, not unless you physically trash it or delete your sites from your domain file.
All your domain files are stored under User/Library/Application Support/iWeb/domain.sites. Look here and your domain files should be there - be careful to look under your User/Library as iWeb is not found under your System Library.
The only drawback that I can see with iWeb is the inability to import published sites. Anything else that you want to do can be worked around with the use of either html code and the html snippet or javascript code etc.
What you have to remember is that iWeb was originally developed for personal websites and nothing else - people without that much technical knowledge of web design who just wanted to get some kind of good looking site up and published with a few photos etc. This is why .Mac and now MobileMe was created so that you have ease of one click publishing.
Apple have improved it with each subsequent version, by including certain extra features with iWeb 09, however, it is still primarily meant to be for personal sites.
iWeb can be used to make some very good looking business sites too and you don't have to host on MobileMe.
iWeb is due another upgrade soon and there is some speculation that as 2010 was missed out as an upgrade the next version might be iWeb 11, so we'll all just have to wait and see what happens. Perhaps January next year and there are rumours that it was undergoing a complete overhaul.

WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click o

WHen I choose an album, upload a file(s), just as the file(s) is uploaded the file I have chosen disappears and I am asked to choose album again. If I ignore this and drag a file onto the sceneline, I get the "where is the file " message" and when click on the file it is looking for I get the message "This type of file is not supported, or the required codec is not installed". I have made many little films before but always have this problem now. Any suggestions?

Margaret
Although we are continents apart - Australia (Perth) vs North America (US), we will not let time zones interfere with getting your Premiere Elements 8.0/8.0.1 working.
1. The usual Premiere Elements 8 drill.
a. Are the automatic features of Background Rendering and AutoAnalzyer turned Off?
For Background Rendering, see Premiere Elements workspace Edit Menu/Preferences/General. For AutoAnalzyer, see Elements Organizer workspace Edit Menu/Preferences/AutoAnalyzer Options.
b. Are you running the program from the 8.0.1 Update? If not, see Help Menu/Update?
c. Do you have the latest version of QuickTime installed on your computer with Premiere Elements 8.0/8.0.1?
Apple - QuickTime - Download
2. The usual computer drill....for your Windows XP 32 bit (SP3, I presume)
a. Is computer opitimized, defragmented, etc.
CCleaner - PC Optimization and Cleaning - Free Download
b. Are you running your computer from a User Account with Administrative Privileges? That is important for Premiere Elements 8 as well as for its
required QuickTime. In addition, right click the computer desktop icon for Premiere Elements 8 and select and apply Run As Administrator.
3. Project Specifics
For now, import your source media into the project from the computer hard drive using the project's Get Media/Files and Folders. Leave the Elements Organizer and Albums out of the equation for now. We will circle back to it soon after we decide everything else is working as it should be.
a. You need to set a project preset. And, that project preset should match the properties of your source media. So important to know properties of source media.
b. When you import your source media into a project you will get a red line over its content if the project preset is not a match - either because you set the wrong one or the program does not have a match for your particular video. That red line means that you are not seeing the best possible preview of what is being played back in the Edit area monitor. To get the best possible preview, you hit the Enter key of the computer main keyboard to get a rendered Timeline (red line goes from red to green after this type of rendering). That green line over your rendered Timeline indicates that you are now getting the best possible preview. This is solely a preview thing. Longer story, but I will leave it at that for now.
c. Check Edit Menu/Preferences/Scratch Disks to assure that those Scratch Disks are being saved to a computer hard drive location with enough free space to accept them. Make sure that you do not have pile ups of previews files, conformed audio files, and conformed video files.
See Local Disk C\Documents and Settings\Owner\My Documents\Adobe\Premiere Elements\9.0
Never move, delete, or rename source files after they have been imported into a project which has been saved/closed. Otherwise, nasty media disconnect problems. You have only copies of media in Premiere Elements. The originals are on the hard drive, and the project must trace back to the originals where they were at import.
Based on the above, try to start a new project. But, let me know ahead of time what you will be importing into the project. I am looking for
Video
video compression
audio compression
frame size
frame rate
interlaced or progressive
pixel aspect ratio
If you do not know, we could try to get that type of information from knowing the brand/model/settings for the camera that recorded the video.
Photos
Pixel dimensions and how many photos?
Lots and lots of details, but eventually they all mellow into one workflow that you can customize for your projects.
Please do not hesitate to ask questions or to ask for clarification. We can go at whatever pace you feel comfortable with.
ATR

ITunes on one computer is not accessible on another computer, but the reverse is true -- help, troubleshoot

My 2009 iMac can connect to my 2013 iMac, but not the reverse. My 2009 can play anything from the 2013 iTunes, but not the reverse.
When this problem happened there was also a problem of the sound not working on the 2013 iMac. I went through all the standard procedures for both issues eventually resetting PRAM and finally reinstalling Yosemite, which did not fix either problem.
Next, I found an article that had me go into the Audio MDMI app to fix the sound. Perfect. Now the 2013 has sound but still can not connect to the 2009; however, the 2013 can connect to the Macbook and Apple TV. Since I've reinstalled the OS and it can connect to the network and other devices I'm assuming that there is a setting someplace which is set to not connect with the 2009. Is there anything I can check, either an app or through Terminal?
I've looked online for over an hour but I can't find anything to help in this particular situation.

Both computers are logged into the same iTunes account and are on the home sharing network. All of the correct settings have been selected. The problem is intermittent. Sometimes they connect, sometimes they don't. It's not consistent.
Just a few hours ago I connected the two via Ethernet to transfer files. They worked fine, 60 GB in 19 minutes. Later I went back to transfer about 10GB and they wouldn't connected except through Wi-Fi. Once again, 2009 can get into 2013 but not the other way around. It's driving me nuts.
At present 2013 is only showing a wi-fi connection to the Time Machine, not the other two computers.
Any more things to look for?

HT2518 When I try using Migration Assistant an error appears on my pc... "An error occurred while preparing your information for transfer." My mac just continues searching for the pc and yet both are on the same wifi. Please help!!!

When I try using Migration Assistant an error appears on my pc... "An error occurred while preparing your information for transfer." My mac just continues searching for the pc and yet both are on the same wifi. I'm not getting anywhere! Please help!!!

Simple...
http://www.apple.com/uk/support/mac/app-store/contact/

I tried to load the new 7.2 update and all of my settings have been restored. I did the back up to last restore which was on 20th September but all of my Apps have disappeared. please help

Hi there, I have tried to update 7.2 and all of my Apps have disappeared. I was advised to restore so not sure what is going on?

Just re-download them, or sync them back to your phone:
http://support.apple.com/kb/HT2519

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

My new purchases will not sync into my playlist and get and will not show up on my iphone playlist of the same name, and I just tried to sync a new cd into my library and it is not showing up on my iphone.

Hello there, Capricious13.
There are great pointers in the following Knowledge Base article. Depending on where you see the content and where you want to get it to, this should guide you to putting it in the right place:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/ht2519
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

TS1363 Ipod does not appear in my computer or recognized in itunes. When ipod is connected a window pos up aking to import photos off the device and when this is closed the ipod cannot be recognized. Any Help?

Ipod does not appear in my computer or recognized in itunes. When ipod is connected a window pos up aking to import photos off the device and when this is closed the ipod cannot be recognized. Any Help?

Which OS are you using?
In the meantime, research your problem in Knowledge Base.

HT201441 Hello , my name bonilla astrid buy an iphone from a vendor and I forgot the key put it 10 times and I did not realize I had icloud account of the seller and is no longer in the country nose to do would help me please await your response thank you

Hello , my name bonilla astrid buy an iphone 5 from a seller and I forgot the key put it 10 times and I did not realize I had icloud account of the seller and is no longer in the country nose to do would help me please await your response thank you very much .

Sorry, without knowing the Apple ID/Password that was originally used to activate this phone, then there is no way to re-activate it, as you've found out.
Apple can't/won't help you. Your choice is to get this info, or you simply won't be able to re-activate this phone.
If you ex won't give it to you, then consult a lawyer.

In trying to transfer iWeb pages (not uploaded) to another computer I went into the library and transferred the domain onto the desktop. Disaster! On opening iWeb all previous (uploaded) sites have disappeared. Help!

Similar Messages

Maybe you are looking for