In UCSD custom script, how to get information on POD and LOVs ?

Hello
I am new in this community and I am not sure that it is the good place to post this.
We are searching information / examples for UCSD custom tasks scripts and mainly on following topics:
how to get data displayed in converged view starting with name of the POD ?
how to get data in LOV starting with the name of LOV ?
Any help / example / document will be welcome.
Many thanks

Hi Denis,
Take a look at the man page for proc. This describes the API to obtain such information.
Hope that helps,
Ralph
SUN DTS

Similar Messages

  • How to get information about connections and calls?

    Hi everyone,
    I would like to know if there's a way to get informations like time spent and bytes transfered from connections* and callings made from the cellphone, not just from a midlet application?
    * Any type of connections like WAP, SMS, GPRS.
    tks

    As far as getting the time it takes, as i've previously seen responded to this type of problem you can get the time before and after the event that took place and do a subtraction to calculate the time it took.

  • How can get Information of Exfect in Illustrator by Script?

    Illustrator can setting Effect: Illustrator Effect, Photoshop Effect to Object,
    But i find in document not exist attributes can get their information.
    How can get Information of Exfect in Illustrator by Script?

     

  • SAP Cloud for customer how to get the Account ID and UUID from cloud

    Hi Experts,
    I have small requirement in cloud for customer.
    How to get all the account id with UUID in excel sheet using any SDK or other ways?
    Any way to get this information because i have tried using "Mass Data Maintenance" but not getting any information. 
    anyone know how can i get this information in cloud system?
    Many thanks,
    Mithun

    Hi Mithun,
    In my understanding there SAP will not share IP address of tenant. If this is really urgent you should discuss to SAP Partner coach or any other representative. SAP network team will not directly communicate with you, this will require numerous approval inside SAP itself.
    Thanks
    Sunil Maurya

  • How to get information about creation of a virtual machine on a Hyper-v host.

    Hi,
    How to get information about creation of a virtual machine on a Hyper-v host?
    I need: host name, time created, creator user.
    I saw in Hyper-V-VMMS but I found info about movements of VM between hosts.
    Thank's in advance.
    Denius Valiant

    For Host Name * Created Time Use This Command In PowerShell 
    Get-VM -Name (Read-Host "Type Your Vm Name") |select CreationTime , ComputerName
    and for Create User , As i know you should see on Event Log . 
    Go To Event Log Viewer--->Applications And Services Logs--->Microsoft--->Windows--->Hyper-V-VMMS--->Operational 
    You can see in Event Log who create the Vm.
    Whenever you see a helpful reply, click on Vote As Helpful & click on
    Mark As Answer if a post answers your question.
    LinkedIn:
      Facebook:
      

  • HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL

    HOW TO GET INFORMATION ABOUT THE CLIENT MACHINE AT DATABASE LEVEL USING 10g Database and 10g Application Server
    we have developed an application using oracle forms 10g with
    oracle database 10g and Application server 10g
    Application uses a single Oracle User name to connect to database
    where as at Application level there are different users (these are not database users)
    Now how can we get the information about the user/his machine etc. at database level. earlier in 6i/8i we use to get by using
    USERENV('TERMINAL')
    we had written a triggers on tables on Insert/Update where we used to update a database field Last user terminal with USERENV('TERMINAL')
    but not this information is comming to be the machine name of application server where as we wish this to be the machine name of Client. Any Way outs
    thanks
    Chaand Kackria

    hi, you can use the sys_context function, like this:
    select sys_context('userenv','current_user'),
         sys_context('userenv','os_user'),
         sys_context('userenv','host'),
         sys_context('userenv','ip_address'),
         sys_context('userenv','instance'),
         sys_context('userenv','sessionid'),
         sys_context('userenv','terminal')
    from dual;
    Is this what you 're looking for?

  • How to get information about cursor? I had only a reference on it.

    Hello
    How to get information about cursor, that I receive in my procedure as a reference. For example I need to know, a number of columns. I know nothing about this cursor, except the link on it.
    Best Regards, Kostya Proskudin!

    However, I would seriously reconsider what you are trying to achieve.
    It looks like you are trying to write some ultimately generic cursor processor. i.e. pass any cursor and process it in some generic way.
    Good design should include knowledge of what is expected to be passed and that knowledge can be put into the code.
    Generic code is inherently difficult to maintain and debug and will never 100% deal with all possible situations e.g. even if you know the table being queried in the cursor you can't rely on the data dictionary to give you all the returned columns if some of the returned columns of the cursor are computed columns.
    Be careful you aren't writing something that's going to cause problems later.

  • How to get information about limitation Internal Memory on device

    hallo ..
    have some question here, so please some person able to answer my questions 
    1. How to get Information about limitation internal memory on device 
    2. is possible to improve internal memory on Blackberry ( move apps on external memory )
    3. any tools to get internal memory activity ?
    thanks for this people who joins here, hope we can share more information about blackberry .. 

    In addition...
    There are three types of potential memory on a BB: 1) Application Memory, 2) Device Memory, and 3) Media/SD Card Memory.
    Application Memory -- This is the most crucial; it is the protected (not user accessible), dedicated, and fixed (in size) space that is available as the destination for the installation of applications (plus some application storage, overhead and such). You cannot touch AppMemory. You cannot improve the maximum AppMemory that your BB has. It is what it is. Applications can only install here...there is no option.
    Device Memory -- This is space on your BB that you can touch to store files, pictures, media, etc. Typically, it is not terribly large, but it is available to you.
    SD/Media Card Memory-- This is what it says...your SD card, for you to store files, media, pictures, etc. It can be as large as your BB OS can support...see this KB:
    KB05461MicroSD card sizes supported by the BlackBerry device software
    On some devices/OS levels, you can only see "File Free" (Options > Status), which I think is equivalent to AppMemory. On other devices, you can see all three memory usage levels (Options > Memory). Here are some guidelines to use:
    KB02843What is the Low Memory Manager feature on the BlackBerry smartphone
    KB14320How to maximize free space and battery power on the BlackBerry smartphone
    KB14213Call logs, SMS text messages, and email messages are deleted from the BlackBerry smartphone
    Lastly, it is always important to properly close applications when you are done with them. Using the Back or the Red key will not do this -- those leave it to the app to decide what to do...and some will leave themselves resident in memory, consuming resources on your BB, slowing the overall performance. Rather, to close an app, press and select "Close" or "Exit"...that will force the application to be closed, freeing up for your new use the resources it was consuming. Some apps will always remain running (typically -- BBMessenger, Browser, Homescreen, Phone, and Messages)...but, you should still close them properly - especially the Browser...if it is left on an active web page, it will not only consume extra resources but battery power as well.
    Further, anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure. Some have taken to doing this on a regular basis as a preventive measure...some as frequently as once per day. Others have obtained the QuickPull app to automate a simulated Batt-Pull.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to get information about file owner in UNIX

    Dear all
    I would like to write a file management program in Solaris 8 using Java.
    However, I don't know how to get the file owner and file permission information
    by any Java class. Please advise.
    Sincerely Yours
    Mr. Voravit H.

    I fear there will be no pure java solution, because file owner and file permissions are platform-dependent issues, especially about the gory details (groups, executable / sticky / setuid-bits, ACL etc.)
    AFAIK java supports only the notion of a file's being readable or writeable but nothing further.
    On the other hand, some (even popular and wide-sprread) platforms / file systems do not have the notion of the owner of a file.
    So you will need some platform-specific solution like running an external command or calling the C function "stat".

  • How to get informed by email about changes on service messages of the servi

    How to get informed by email about changes on service messages of the service desk.
    I need a kind of overview
    functional details
    and a very good guideline to do the implementation
    Does anyone know how to do it?

    Hi,
    Go throw this
    Note  691303, Note 1041455
    you will find each and every thing abt  implementation .
    Send mail to Message Processor in Service Desk
    Points if helpfull
    Regards,
    Neni

  • How to get the kerning value and set it to back use script?

    hi,guys
    I come back again.
    I encountered a kerning problem.
    how to get the kerning value and set it to back use script?
    Thanks very much!

    For both cases, the filename can be found on the FILE.ReceivedFileName Context Property.  You can access this Property in a Pipeline Component or Orchestration and take any action you want, such as apply to a database.
    The value is accessed by: MyReceivedMessage(FILE.ReceivedFileName)
    In the case of a duplicate EDI Interchange, you would use the Failed Message Routing feature to capture the error message with either an Orchestration or Send Port.

  • How to get information from my laptop to my ipad

    I`m new on I-pad
    How to get information from my laptop to my ipad
    Saludos
    Josè Montero

    Heres some Apple Support tips on the subject.
    How to transfer and sync content to your computer:
    http://support.apple.com/kb/ht1296
    How to transfer files between your computer and mobile apps:
    http://support.apple.com/kb/PH1693
    How to do file transfers:
    http://support.apple.com/kb/HT4094

  • How to get all paragraphs style and their fonts of a  indesign file and write all info with para info into txt file with scripting

    how to get all how to get all paragraphs style and their fonts of a  indesign file and write all info with para info into txt file with scriptingstyle and their fonts of a  indesign file and write all info with para info into txt file with scripting

    I write the script this one works
              var par=doc.stories.everyItem().paragraphs.everyItem().getElements();
      for(var i=par.length-1;i>=0;i--)
           var font=par[i].appliedParagraphStyle.name;
            var font1=par[i].appliedFont.name;
             var size=par[i].pointSize;
            WriteToFile (par[i].contents  +   "\r" +  "Style  : " + font  + "\r" +  "FONT1  : " + font1  + "\r" +  "Size  : " + size  + "\r", reportFilePath);
                            function WriteToFile(text, reportFilePath) { 
        file = new File(reportFilePath); 
        file.encoding = "UTF-8"; 
        if (file.exists) { 
            file.open("e"); 
            file.seek(0, 2); 
        else { 
            file.open("w"); 
          file.writeln(text);  
        file.close(); 
    Thanks for all your support

  • I've used iMessage for abit now and latly my step dad has got an ipad that is now joint to the same computer and on his ipad is my number and the email for imessage and i want to no how to get it of fully and not just untick it?

    I've used iMessage for abit now and latly my step dad has got an ipad that is now joint to the same computer and on his ipad is my number and the email for imessage and i want to no how to get it of fully and not just untick it?

    Hi barryfromwarrington,
    Welcome to the Support Communities!  There are two things I can think of to keep your Stepdad's information separate from yours on the computer and the iPad.   On the computer, he should have his own administrative account, and on the iPad he needs his own Apple ID for iTunes and iCloud services.  Here is some basic information to get started.  I don't know if you have a Mac or Windows computer, so I'll include info for both.)
    OS X Yosemite: Set up users on your Mac
    http://support.apple.com/kb/PH18891
    OS X Yosemite: Set up users on your Mac
    If your Mac has multiple users, you should set up an account for each person so he or she can personalize settings and options without affecting other users. 
    Add a user
    Choose Apple menu > System Preferences, then click Users & Groups.
    Click the lock icon  to unlock it, then enter an administrator name and password. 
    Click Add  below the list of users. 
    Click the New Account pop-up menu, then choose a type of user.
    administrator: An administrator can add and manage other users, install apps, and change settings. 
    Enter a full name for the new user. An account name is generated automatically. To use a different account name, enter it now—you can’t change it later. 
    Enter a password for the user, then enter it again to verify. Using a password hint is recommended to help the user remember his or her password. 
    Click Create User.
    For an administrator, select “Allow user to administer this computer.”
    Last Modified: Nov 18, 2014
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    http://support.apple.com/en-us/HT203206
    Follow the steps below to create a new user account in Windows Vista or Windows 7:
    Choose Start > Control Panel.
    Open "Add or remove user accounts." (If you're using the Classic view in Windows Vista, open "User Accounts," and then open "Manage another account.")
    Select "Create a new account" and follow the instructions to set up the account.
    Once you create the new account, choose Start > Log Off.
    Log in to the new user account.
    Open iTunes and see if the issue you're experiencing persists in this new user account.
    Frequently asked questions about Apple ID - Apple Support
    http://support.apple.com/en-us/HT204161
    iCloud: Set up iCloud
    http://support.apple.com/kb/PH2609
    Cheers,
    - Judy

  • I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on.  The Tech told me to

    I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion.  Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine.  Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer.  I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs.  Also the computer keeps freezing up when it is in the sleep mode, etc.
    When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it.  Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

    Go to the  menu/About This Mac - what OS version shows there?
    Do a backup, preferably 2 separate ones on 2 separate drives.
    Revert to a Previous OS X
    Revert to Snow Leopard
    If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

Maybe you are looking for