In urgent need of a clear casing for 17" MBP

Hi,
After browsing the net for a while i found nothing useful so i turn here...
I have a 17" MacBook Pro (no unibody) and i need a very slim hard plastic casing i can click around it and found a few for 15" MBP's but nothing for 17".
I am about to travel soon and last time at the airport they made me take out the mac (also out of the sleeve) and scratched it up pretty bad while it went through the scanner banging around in a plastic tray :/
If anyone can suggest a brand that would be appreciated.
Thanks alot!
Jay
(I know this is probably not the right place to ask but i need it asap)

This is the actual product website. I don't know if they ship to holland. Good Luck
http://www.speckproducts.com/products/bydevice?deviceid=70

Similar Messages

  • Urgently need a Technical Specification Document for any java development

    hi friends,
    I urgently need a tech spec doc for any java developments , wanted to refer for creating templates for a product . Please help its very urgent.
    Thanks

    Here are a couple of hundred technical specifications for a wide variety of Java development projects:
    http://jcp.org/en/jsr/all

  • Urgent -Need to Add new values for the LOV field in forms

    HI,
    I am customizing an existing form. In that i need to add some values for the LOV fied which can be used during run time.
    Please Can some one help me in doing this?
    Thanks
    Suresh P

    Go to Navigator and edit the LOV or create a new one.
    hope that helps!

  • URGENT - need to compress a file for the web

    I need to do something IMMEDIATELY that I've never done before, and I simply don't have time to read the manuals to tell me how to do this.
    I have a 2 and a half minute video segment in FCP that I need to export for use on a web site. The main objective is to make this a smaller file size so it won't take up too much band width. We can sacrifice quality in order to make this a smaller file size.
    Do I Export by using Compressor? What settings do I use?
    We're in the middle of an intense political battle and I need to get this on our web site today. Please help!
    Bryce Inman

    We're in the middle of an intense political battle and I need to get this on our web site today. Please help!< </div>
    Consider hiring a consultant?
    right under the EXPORT command, you will find Quicktime Conversion.
    Use that and select Sorenson (or Sorenson 3). Leave all the defaults set as they are.
    Once you've finished that and mounted it on your site, you can go back and try other settings. But I think you will understand very soon why your question cannot be answered easily. There are literally thousands of combinations of settings that will affect the quality of your movie and the viewing experience of your visitors. There are no easy solutions for downloadable or hinted movies except to hire an expert.
    bogiesan

  • Urgently required Crystal Reports 2008 FixPack_03 for SAP B1 8.8

    Dear All,
    I Urgently need Crystal Reports 2008 FixPack_03 for SAP B1 8.8. It is unavailable on the following link:
    Crystal Reports 2008 Reference [original link is broken]
    I have also searched it but unable to find it. If anyone has this, kindly share it.

    Hi Iqbal,
    There is a service pack in the following link
    https://www.sdn.sap.com/irj/sdn/businessone?rid=/webcontent/uuid/807d22cb-cb1d-2b10-8794-fb76d7feca88 [original link is broken]
    There is a fix pack 03 included in the folder, I don't know if this is relevant.
    Cheers

  • Urgent,need for code in bdc for co02

    hi all,
    im in urgent need of code for developing bdc tcode co02.
    Thanks for your help..

    1. Please record the transaction which you need to change the data in Co02 (Shop Order/Prod. Order)
    2. Create BDC program as normally you do it for normal BDC programs..
    Smaple Code with Recording.
    clear: bdcdata,messtab.
      perform bdc_dynpro using: 'SAPLCOKO1' '0110'.
      perform bdc_field using: 'CAUFVD-AUFNR' t_aufk-aufnr.
      perform bdc_field using: 'R62CLORD-FLG_OVIEW' 'X'.
      perform bdc_field using: 'BDC_OKCODE' '/00'.
      perform bdc_dynpro using: 'SAPLCOKO1' '0115'.
      perform bdc_field using: 'BDC_SUBSCR' 'SAPLCOKO1'.
      perform bdc_field using: 'BDC_OKCODE' '=KOWE'.
      perform bdc_dynpro using: 'SAPLCOKO1' '0115'.
      perform bdc_field using: 'BDC_SUBSCR' 'SAPLCOKO1'.
      perform bdc_field using: 'BDC_CURSOR' 'AFPOD-INSMK'.
       perform bdc_field using: 'AFPOD-INSMK' 'S'.
      perform bdc_field using: 'BDC_OKCODE' '=BU'.
      call transaction 'CO02' using bdcdata mode 'A'
                                            update 'S'
                                            messages into messtab.
    Thanks,

  • Urgent Need in Dallas Texas for a Sr. Oracle BPEL Developer

    $$$$$$$$$$$$
    I have an urgent need for a Sr, Oracle BPEL Developer in the Dallas Texas area. With this position, you can interview and start immediately. If you are interested or know of anyone looking please send my way. Or know of companies that use BPEL would be helpful too.
    Warm regards,
    Kim Dobson
    Sr. Account Manager
    Eventus Group Technology Resources
    10100 N. Central Expressway
    Suite 150
    Dallas, TX 75231
    Office 469.916.4857
    Mobile 214.277.2097
    Fax 469.916.3861
    [email protected]

    I was told by Dave Shaffer, Director Product Management, Oracle BPEL Process Manager to do this posting here. I am sorry but this is a critical need for me and was just looking for help.
    Kim Dobson

  • HELP urgently needed: My Sandberg FireWire for Laptop will not start on my T60

    Let me start with information on my T60:
    OS information: Microsoft Windows XP
    OS version: 5.10.2600   Service Pack 2
    Processor: x86 Family 6 Model 14 Stepping 8
    Memory: 3.135.856 kb
    BIOS version: 2.09  (79ETC9WW)
    Machine type-Model: 1951A47
    I have just got a new Sandberg FireWire for Laptop, a PC Card with 3 6-pins connectiont. After inserting the card in the PC Card slot, the Windows Device Manager tells me that there are problems with the card. Looking at the 1394 Card Properties the status says:
    "This device cannot start. (Code 10) - Click Troubleshoot to start the troubleshooter for this device."
    The troubleshooter did not solve my problem. I have tried disconnecting, re-connection, shut down Windows and start again etc.
    At Sandberg Help Desk they tell me that I have two slots in my laptop, one with a 16 bits bus and another with a 32 bits slots, and I should use the latter. It seems that I can use the lower slide only in my laptop and I cannot push the card into the upper slide. There is not enough room for it.
    Here is what I found on Lenovo's support site on my type & model:
     PC Card
    Conforms to the PC Card Standard 95
    Type II slot
    Both the 16-bit Release 2.1 card standard and the 32-bit CardBus card are supported.
    Have a look at these screen captures.
    What should I do to solve my urgent problem!? 
    Message Edited by pbl_ibm on 10-09-2008 05:10 AM
    Message Edited by pbl_ibm on 10-09-2008 07:27 AM
    Message Edited by pbl_ibm on 10-09-2008 07:45 AM
    Message Edited by pbl_ibm on 10-09-2008 07:45 AM

    garytr23 wrote:
    Sounds to me like a driver configuration problem.  Maybe something bad happened during driver install.  I would recommend uninstalling the device from device manager by right clicking on it and hitting uninstall.  Reboot the computer.  Have a go at it again.  Also, test your pcmcia port functionality by finding and plugging in a different card.  See if that works.  It might need repair.
    Message Edited by garytr23 on 10-09-2008 09:41 AM
    The status right now is:
    The PC Card reader works on my T60
    If I use a Firewire PC Card it will not start - as described above (on T60)
    The PC Card work properly on my T61P - and I succeeded importing a video file from a digital camera using the Fireswire PC Card.
    So what does a wise man do in this situation??
    Please help me as I urgently need to know how to solve this serious issue!! 
    Have you got an idea? Can I import the video in another way??
    Message Edited by perbuch on 10-12-2008 07:55 AM

  • Urgently  need help for parsing IP header

    Hi, could anyone tell which class I should use to parsing the IP header of a packet?
    Thanks many many times!

    > Hi, could anyone tell which class I should use to
    parsing the IP header of a packet?
    DatagramPacket?
    > Urgently need help for parsing IP header
    Don't flag your question as urgent, even if it is for you.
    * We all answer questions here voluntarily, in our leisure time. We do that because doing so is fun for us, because we enjoy helping people and having interesting discussions. Guess what, it is much less fun if it gets stressful. So the last thing you want to do to get us to answer your question is to pass your stress over to us.
    * People who are stressed and want a fast answer often don't even find the time to do the necessary research or to formulate their question in an easy to comprehend way. That's even less fun to work with. So you really don't want us to feel your stress. Instead you want to take your time to write a well formulated post that is fun to answer. The less likely it is for us to know that your question is urgent, the more likely you are to get a fast answer!
    * The simple notion that you want your post to be answered faster than those of the other members might feel rather unfair to some of us. Doubly so because often "urgent" questions actually are homework questions. Yours might be different, but someone who had bad experiences with this type of question might not read far enough to notice.

  • I urgently need a contact email for the sales team can anybody help me with this

    I urgently need a contact email for the sales team regarding an outstanding query, can anybody help me with this please? Thanks in advance.

    Hello 
    Welcome to the EE Community! I'm afraid there isn't an e-mail you can contact the EE Mobile Sales team on, but here's how you can get in touch with them:
    If you're on Twitter, you can tweet them @EE, however If you'd prefer to talk to someone, you can dial:
    150 from your EE mobile phone
    If you're ringing from another phone, it's 01707 315000
    For handy text codes & more, check out this page: http://ee.co.uk/help/get-in-touch Cheers,
    Titanium
    Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

  • Clearing date for the payment invoice through APP

    Hi All,
    I have some payment invoice which falls net due date on sunday so i can't able to run app on sunday(holiday)  so i use to run on saturday for getting the discount before the net due date.  While paying like this the system is taking clearing date and value date as sunday as per the net due date of the invoice, which is on holiday for the banks instead of what i have given in the payment parameters as saturday.
    what can i do for this to get payment parameters date as clearing date for the invoice.
    In the payment method for this invoices the payment per due date check box is unchecked in the configuration.  If i select this check box is it works for payment parameters date as clearing date.
    Please help me on this issue urgent.
    Thanks @ Regards
    Nandha

    Hi Jigar,
    Thanks for ther reply,
    that all different issues,
    My issue is the user run the payment run on saturday  with posting date as saturday which the invoice are  due on sunday in the clearing invoice they are getting the clearing date as sunday which is holiday for banks. 
    So I need to get clearing date as saturday for that net due date as sunday invoices why because i giving the posting date as saturday.
    Please suggest me what should i do for this issue.
    Thanks & Regards
    Nandha

  • I m in urgent need of sme alv reports in sd module so plz hlp me out.

    i m in urgent need of sme alv reports in sd module so plz hlp me out.
    if possible plz provide explanation so tht i can understand it fast and well.

    check with below standard reports :
    Sales summary - VC/2
    Display Customer Hierarchy - VDH2
    Display Condition record report - V/I6
    Pricing Report - V/LD
    Create Net Price List - V_NL
    List customer material info - VD59
    List of sales order - VA05
    List of Billing documents - VF05
    Inquiries list - VA15
    Quotation List - VA25
    Incomplete Sales orders - V.02
    Backorders - V.15
    <b>Outbound Delivery Monitor - VL06o
    Incomplete delivery - V_UC</b>Customer
    Returns-Analysis - MC+A
    Customer Analysis- Sales - MC+E
    Customer Analysis- Cr. Memo - MC+I
    Deliveries-Due list - VL04
    Billing due list - VF04
    Incomplete Billing documents - MCV9
    Customer Analysis-Basic List - MCTA
    Material Analysis(SIS) - MCTC
    Sales org analysis - MCTE
    Sales org analysis-Invoiced sales - MC+2
    Material Analysis-Incoming orders - MC(E
    General- List of Outbound deliveries - VL06f
    Material Returns-Analysis - MC+M
    Material Analysis- Invoiced Sales - MC+Q
    Variant configuration Analysis - MC(B
    Sales org analysis-Incoming orders - MC(I
    Sales org analysis-Returns - MC+Y
    Sales office Analysis- Invoiced Sales - MC-E
    Sales office Analysis- Returns - MC-A
    Shipping point Analysis - MC(U
    Shipping point Analysis-Returns - MC-O
    <b>Blocked orders - V.14</b>
    Order Within time period - SD01
    Duplicate Sales orders in period - SDD1
    Display Delivery Changes - VL22
    Simple example what  i did - Monthly Sales Report
    TYPE-POOLS
    type-pools : slis.
    Tables
    tables : VBAK,
             VBAP.
    Internal table for VBAK Table
    data : begin of i_vbak occurs 0,
           vbeln like vbak-vbeln,
           bstnk like vbak-bstnk,
           vdatu like vbak-vdatu,
           end of i_vbak.
    Internal table for VBAP and MATNR
    data : begin of i_vbap occurs 0,
           vbeln like vbap-vbeln,
           matnr like vbap-matnr,
           kdmat like vbap-kdmat,
           kwmeng like vbap-kwmeng,
           netpr like vbap-netpr,
           maktx like makt-maktx,
           end of i_vbap.
    Internal tables
    data : begin of i_sales occurs 0,
           vdatu like vbak-vdatu,
           bstnk like vbak-bstnk,
           matnr like vbap-matnr,
           maktx like makt-maktx,
           kdmat like vbap-kdmat,
           kwmeng like vbap-kwmeng,
           netpr  like vbap-netpr,
           end of i_sales.
    Variable for ALV
    data : v_repid like sy-repid,
           gt_fieldcat    type slis_t_fieldcat_alv.
    Selection-screen
    selection-screen : begin of block blk with frame title text-001.
    select-options : s_vbeln for vbak-vbeln,
                     s_erdat for vbak-erdat,
                     s_ernam for vbak-ernam,
                     s_vdatu for vbak-vdatu obligatory,
                     s_BSTNK for vbak-BSTNK,
                     s_KUNNR for vbak-kunnr,
                     s_matnr for vbap-matnr,
                     s_KDMAT for vbap-KDMAT.
    selection-screen : end of block blk.
    Initilization
    initialization.
      v_repid = sy-repid.
    S T A R T  -  O F  -  S E L E C T I O N ****************
    start-of-selection.
    Get the data from VBAK and VBAP Tables
      perform get_vbak_vbap.
    E N D  -  O F  -  S E L E C T I O N *****************
    end-of-selection.
    Display the data
      perform dispolay_data.
    *&      Form  get_vbak_vbap
          Get the data from VBAK and VBAP Table
    FORM get_vbak_vbap.
    Get the data from VBAK Table
      select vbeln bstnk vdatu from vbak into table i_vbak
                         where vbeln in s_vbeln
                         and   bstnk in s_bstnk
                         and   vdatu in s_vdatu
                         and   kunnr in s_kunnr
                         and   erdat in s_erdat
                         and   ernam in s_ernam.
      if sy-subrc ne 0.
        message e000(zwave) with 'No data found for given selection'.
      endif.
    Get the data from VBAP Table
      select avbeln amatnr akdmat akwmeng a~netpr
             b~maktx into table i_vbap
             from vbap as a inner join makt as b on bmatnr = amatnr
             for all entries in i_vbak
             where a~vbeln in s_vbeln
             and   a~kdmat in s_kdmat
             and   a~abgru = space
             and   a~matnr in s_matnr
             and   a~matnr ne '000000000000009999'
             and   a~matnr ne '000000000000004444'
             and   a~matnr ne '000000000000008888'
             and   a~matnr ne '000000000000001111'
             and   a~werks = '1000'
             and   b~spras = 'E'
             and   a~vbeln = i_vbak-vbeln.
      if sy-subrc ne 0.
        message e000(zwave) with 'No data found for given selection'.
      endif.
      sort i_vbak by vbeln.
      sort i_vbap by vbeln matnr.
      loop at i_vbap.
        read table i_vbak with key vbeln = i_vbap-vbeln
                                binary search.
        if sy-subrc eq 0.
          i_sales-bstnk = i_vbak-bstnk.
          i_sales-vdatu = i_vbak-vdatu.
          i_sales-matnr = i_vbap-matnr.
          i_sales-kdmat = i_vbap-kdmat.
          i_sales-maktx = i_vbap-maktx.
          i_sales-netpr = i_vbap-netpr.
          i_sales-kwmeng = i_vbap-kwmeng.
          append i_sales.
        else.
          continue.
        endif.
        clear : i_sales,
                i_vbap,
                i_vbak.
      endloop.
      sort i_sales by vdatu bstnk matnr.
      refresh : i_vbap,
                i_vbak.
    ENDFORM.                    " get_vbak_vbap
    *&      Form  dispolay_data
          Display the data
    FORM dispolay_data.
    Fill the Fiedlcat
      PERFORM fieldcat_init  using gt_fieldcat[].
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
      I_INTERFACE_CHECK                 = ' '
      I_BYPASSING_BUFFER                =
      I_BUFFER_ACTIVE                   = ' '
          I_CALLBACK_PROGRAM                = v_repid
      I_CALLBACK_PF_STATUS_SET          = ' '
      I_CALLBACK_USER_COMMAND           = ' '
      I_CALLBACK_TOP_OF_PAGE            = ' '
      I_CALLBACK_HTML_TOP_OF_PAGE       = ' '
      I_CALLBACK_HTML_END_OF_LIST       = ' '
      I_STRUCTURE_NAME                  =
      I_BACKGROUND_ID                   = ' '
      I_GRID_TITLE                      =
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         =
          IT_FIELDCAT                       = gt_fieldcat[]
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
      IT_SORT                           =
      IT_FILTER                         =
      IS_SEL_HIDE                       =
      I_DEFAULT                         = 'X'
      I_SAVE                            = ' '
      IS_VARIANT                        =
      IT_EVENTS                         =
      IT_EVENT_EXIT                     =
      IS_PRINT                          =
      IS_REPREP_ID                      =
      I_SCREEN_START_COLUMN             = 0
      I_SCREEN_START_LINE               = 0
      I_SCREEN_END_COLUMN               = 0
      I_SCREEN_END_LINE                 = 0
      IT_ALV_GRAPHICS                   =
      IT_ADD_FIELDCAT                   =
      IT_HYPERLINK                      =
      I_HTML_HEIGHT_TOP                 =
      I_HTML_HEIGHT_END                 =
      IT_EXCEPT_QINFO                   =
    IMPORTING
      E_EXIT_CAUSED_BY_CALLER           =
      ES_EXIT_CAUSED_BY_USER            =
        TABLES
          T_OUTTAB                          = i_sales
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
    ENDFORM.                    " dispolay_data
    *&      Form  fieldcat_init
          text
         -->P_GT_FIELDCAT[]  text
    FORM fieldcat_init USING  e01_lt_fieldcat type slis_t_fieldcat_alv.
      DATA: LS_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
    Delivery Date
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'VDATU'.
      LS_FIELDCAT-OUTPUTLEN    = 12.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Delivery Date'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Purchase Order #Material Description
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'BSTNK'.
      LS_FIELDCAT-OUTPUTLEN    = 25.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Purchase Order #'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Material
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-REF_FIELDNAME    = 'MATNR'.
      LS_FIELDCAT-REF_TABNAME    = 'MARA'.
      LS_FIELDCAT-FIELDNAME    = 'MATNR'.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Material #'.
      ls_fieldcat-seltext_M = 'Material #'.
      ls_fieldcat-seltext_S = 'Material #'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Material Description
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'MAKTX'.
      LS_FIELDCAT-OUTPUTLEN    = 40.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Material Description'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Customer Material #
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'KDMAT'.
      LS_FIELDCAT-OUTPUTLEN    = 35.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Customer material no.'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Quantity
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'KWMENG'.
      LS_FIELDCAT-OUTPUTLEN    = 15.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Quantity'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    Net Price
      CLEAR LS_FIELDCAT.
      LS_FIELDCAT-FIELDNAME    = 'NETPR'.
      LS_FIELDCAT-OUTPUTLEN    = 15.
      LS_FIELDCAT-TABNAME    = 'I_SALES'.
      ls_fieldcat-seltext_L = 'Net Price'.
      APPEND LS_FIELDCAT TO E01_LT_FIELDCAT.
    ENDFORM.                    " fieldcat_init
    Thanks
    Seshu

  • Urgent :need help to setup Master to snapshot(read only) environement

    Hi,
    I need your help urgently. I don't know much about master to Snapshot configuration. I need to do prototype of master to snapshot(read only) as soon as possible. I need replication setup/configuration scripts.
    DB1 is master database (8i) and DB1 is Snapshot site db.
    both dbs are identical except they have different Global_name.
    I want to replicate table from DB1---> DB2 unidirectional.
    Global name for DB1 is DB1.world and for DB2 is DB2.world
    TNS names are DB1 and DB2 respectively and TNSNAMES.ORA file is same on both server.
    Schema owner of Mster site (who owns the tables that I want to replicate) is user 'SYNAPSE'. On DB2 I have also same schema with same tables. Lets say table called 'TEST' that I want to replicate from DB1 to DB2.
    for simplicity I want to have only one account(user) on both site who can do administration and take care of all other task including replication.
    I need scripts to do setup for the replication environment described above.
    In short please provide me script to replicate DB1 to DB2 (Master to snapshot).
    I appreciate your help very much.
    You can reach me at [email protected] as well.
    Thank you.
    Pravin

    Finally I figured out how to setup/configure master to Snapshot environment but I have to say that Oracle documents are very confusing.
    The problems I ran into are:
    User Repadamin can't create MV in schema owner other than repadmin. Work arround I used is let that schemema owner allow to create MV.
    Other proble ran in is Constraint(FK) violation when trying to do using refresh group. To resolve this problem either disable constraints on snapshot site or create constraints usinf deferred option.
    Pravin

  • GR/IR Clearing Account for Material & Asset

    Hi,
    We want to maintain different GR/IR Clearing Account for Materials & Assets.
    Pls. guide.
    Regards,

    Hi
    In case of asset - we define account determination in asset master which is like stock account for material. But if you use purchase order then for asset you use account assignment category as A - it means it is like account assigned purchase order. So all goods reciept credit on these POs will go to GR/IR account created without valuation class. Same time if you donot maintain service masters then goods receipt will go to same account (no valuation class). So either you need to define service materials or use same account for both.
    Thanks

  • Why we use different clearing account for GR/IR and planned cost clearing a

    My client ask for using same account for GR/IR account and all planned cost clearing account.
    i try to convince it should be different accounts but he needs a logical answer.
    Why we use different clearing account for GR/IR and planned cost clearing accounts?

    Dear friend.
    u just tell him while doing GR it will debited n  while doing IR it should get credited.hence we  need to take diff G/L account or same account.
    regds
    nasir

Maybe you are looking for