In version 31.2.0 have error in console " Error: Please do not load stuff in the multimessage browser directly" is this causing poor performance?
Windows 8.1
Error message at startup
Timestamp: 26/11/2014 21:33:29
Error: Please do not load stuff in the multimessage browser directly, use the SummaryFrameManager instead.
Source File: resource://gre/modules/summaryFrameManager.js
Line: 85
What does this mean?
If you keep getting a 'red' message it means that the HDD is faulty and will have to be replaced. You will have to format the new HDD in Disk Utility>Erase and then install the OSX and your data from Time Machine.
Ciao.
Similar Messages
-
Trouble getting QuickTime to run on Windows 7.Installation seems to finish successfully. When can try to open it I get the following error message:
Error 46: Could not load or find the Quick Time Active X control. I have reinstalled QuickTime and itunes several times but with no luck. Any suggestions?Hi Pedro d,
Yes but no! I have tried everything step by step several times. Researching Error 46 on the web is scary business!! The gangsters are out in force on this one, begging to take your money! From a couple of trusted sites I have been able to make this much clear at least for Vista users, I'm using Windows 7 but I think they relate:
"Since the issue causing the Error 46 is that QuickTime registry entries don't have the correct permissions set, the repair is to go and reset all the incorrect permissions. However, this is a long and tedious process. The SubInACL tool from Microsoft (see the link in Resources) can change the permissions as a batch. The batch is defined by a CMD file that lists all of the registry keys to be changed. Once SubInACL is installed on your computer, move the CMD file with all the registry changes into the same folder, typically C:\Program Files\Windows Resource Kits\Tools. Right-click the CMD file, choose "Properties," check "Run this Program in Compatibility Mode" and select "Windows Vista (Service Pack 2)" from the drop-down menu. Click "OK." Do the same for SubInACL. When you're done, double-click on the CMD file and it will run. Your error should be gone."
I don't have the expertise to do this, do you? I wish that Apple or someone would take the bull by the horns and fix this because what I've read their are a lot of people having this problem. Any thoughts on this matter would be greatly appreciated.
Kindly,
pappy01545 -
Error 46: Could not load or find the QuickTime ActiveX control
Bought QuickTime pro, and this is the only thing that happens when i try to open the player. Any assistance for me would be appreciated. I'm quite sure these others in the following posts would like an answer as well.
On Apple Forums: posted Posted: Oct 23, 2007 4:22 PM -yes, 6 weeks ago
http://discussions.apple.com/thread.jspa?threadID=1191626&tstart=60
Off Apple Forums:
http://forums.afterdawn.com/thread_view.cfm/332545
http://www.rllmukforum.com/index.php?showtopic=105657
http://forums.anandtech.com/messageview.aspx?catid=32&threadid=2051213&enterthre ad=y
http://salvius23.blogspot.com/2005/11/for-crying-out-loud.html
http://forums.techarena.in/showthread.php?t=540521
http://www.devhardware.com/forums/apple-hardware-70/error-46-when-installing-itu nes-quicktime-95113.html
http://www.webuser.co.uk/forums/showflat.php/Cat/0/Number/231410/an/0/page/25
http://forum.pcmech.com/showthread.php?t=152917
...and about 400 other hits on just Google alone
Now please...I paid for this software.
I expect it to work
I expect someone who claims to care about their customers to provide information after such a long period of time, even if it is just, "We are looking into it"
Message was edited by: Redmace
Message was edited by: RedmaceI thought ActiveX was only used by the plug-in.
With three other users it seems the app was only installed for the Administrator account. They will have to change the permissions so other users can use the QT Player.
How? I don't know because I've never had more than one user on my PC computer. -
Getting this error on iPhoto open it refers to iLifeSlideShow and iPhoto quits - or doesn't open.
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/iLifeSlid eshow
Referenced from: /Applications/iPhoto.app/Contents/MacOS/iPhoto
Reason: image not foundYes, some perople have seen this. Options:
1. Try reinstall iPhoto. (see below)
2. If you have access to another Mac with the same version of the OS, try and copy that framework over
3. Reinstall the OS.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List.
Regards
TD -
Dear All,
I have installed Sharepoint Foundation 2010 in my server 2012 R2 machine. and I restore my existing content database backup into new site collections. and I'm trying to browse the site collection in window, the below error shown..
Parser Error
Message: Could not load file or assembly 'Microsoft.Office.Access.Server.UI, Version=14.0.0.0,
Culture=neutral, PublicKeyToken=71e9bce111e9429c' or one of its dependencies.
<add assembly="Microsoft.Office.Access.Server.UI, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c" />
I tried to checked the assembly folder having the DLL or not. but its
not available in the C:\Windows\assembly location. and I'm tried to resolved this issue by HOTFIX. but unfortunately, I can't find out the patch file for MOSF 2010 in server 2012 r2.
Please help me on this issue. I'm very new to sharepoint...
Any help will be more appreciated.
Thanks,
MubarakHi Mubarak,
Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]> -
I'm on the latest version and on many websites that have links to others those links will not load.
I'm on the latest version and on many websites that have links to others those links will not load. Links within a site work but anything that sends me elsewhere will no longer load in a new tab. I'm on a mac running Lion.
It means what the message says. The format of the song can't be converted to a format compatible with the iPod.
Does it play in iTunes?
Where id the song come form?
Try deleting and reimporting into iTunes. -
how can i activate my ipad mini? every time the error message is not going there. and the version has expired.
Try this link for activation problems ...
http://support.apple.com/kb/ts3424
If you had iOS 7 BETA installed, just go to developer.apple.com and log in using your developer account. There are discussions about this issue. Otherwise... for non-developers, I'm afraid you're on your on. Use Google. -
how do i repair this?
Dyld Error Message:
Library not loaded: @rpath/MAAudioUnitSupport.framework/Versions/A/MAAudioUnitSupport
Referenced from: /Applications/GarageBand.app/Contents/MacOS/GarageBand
Reason: image not foundI just tryed it and this what i get now,
Thread 0:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x933efb7a __sem_wait_nocancel + 10
1 com.celemony.MelodyneEssentialRewireDevice 0x0c9211b4 GNCondition::waitForSignal() + 32
2 com.celemony.MelodyneEssentialRewireDevice 0x0c920d4f GNMessagePort::registerMessagePortWithName(GNString*, GNData* (*)(GNMessagePort*, GNData*), int, int, GNDictionary*) + 315
3 com.celemony.MelodyneEssentialRewireDevice 0x0c8c2dbe GNReWire2AudioDeviceHost::create() + 172
4 com.celemony.MelodyneEssentialRewireDevice 0x0c8c0f3f RWDEFOpenDevice + 89
5 se.propellerheads.rewire.library 0x0c84584e 0xc841000 + 18510
6 se.propellerheads.rewire.library 0x0c8459b8 0xc841000 + 18872
7 se.propellerheads.rewire.library 0x0c8488e0 RWPUnregisterDeviceImp + 5438
8 se.propellerheads.rewire.library 0x0c846689 RWM2OpenDeviceImp + 57
9 com.apple.music.apps.MAAudioEngine 0x02b1ac13 ReWireUpdateMIDIInfos() + 3427
10 com.apple.music.apps.MAAudioEngine 0x02b02e9f MD::Init(int, bool) + 2367
11 com.apple.music.apps.MAAudioEngine 0x02b0c852 GetCurrentCoreAudioDeviceNameFromUserDefaults(signed char) + 10514
12 com.apple.music.apps.Logic 0x00a7d59e CSong::GetAuConfPoint(TGInstID, SAUCONF**) const + 384926
13 com.apple.music.apps.Logic 0x00a7f5ac CSong::GetAuConfPoint(TGInstID, SAUCONF**) const + 393132
14 com.apple.music.apps.Logic 0x00cb7530 TaskCompleted() + 366032
15 com.apple.music.apps.Logic 0x009fe61b LgApplicationInit + 379
16 com.apple.garageband 0x00067621 0x1000 + 419361
17 com.apple.garageband 0x000667c2 0x1000 + 415682
18 com.apple.Foundation 0x9b887df1 __-[NSNotificationCenter addObserver:selector:name:object:]_block_invoke_1 + 49
19 com.apple.CoreFoundation 0x95311903 ___CFXNotificationPost_block_invoke_1 + 275
20 com.apple.CoreFoundation 0x952dc688 _CFXNotificationPost + 2776
21 com.apple.Foundation 0x9b872fde -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
22 com.apple.Foundation 0x9b888272 -[NSNotificationCenter postNotificationName:object:] + 55
23 com.apple.AppKit 0x98ab9df0 -[NSApplication finishLaunching] + 554
24 com.apple.AppKit 0x98ab97c0 -[NSApplication run] + 142
25 com.apple.AppKit 0x98d4aac5 NSApplicationMain + 1054
26 com.apple.garageband 0x0019cae0 0x1000 + 1686240
27 com.apple.garageband 0x0000311a 0x1000 + 8474 -
I tried to pen iwork but i keep getting this message... Any help please?
Dyld Error Message:
Library not loaded: @rpath/SFBlocks.framework/Versions/A/SFBlocks
Referenced from: /Applications/iWork '09/Keynote.app/Contents/MacOS/Keynote
Reason: image not foundMaybe this will help you, too.
-
An error occurred while trying to communicate with the web browser.
I have opened a PDF in the Acrobat reader V 8.2.4. It has live links.
Only the FF browser is open.
When I click a link in the PDF, I successfully get the message 'The document is trying to connect to...' which I allow and then successfully hyperlink to the web page displayed in FF.
When I click an image in the PDF, which has a url attached to it, I get the message 'An error occurred while trying to communicate with the web browser.'
[Sorry to say in IE7 when I click the image, I hyperlink to the web page like I do when I click the link.]
Question is: What setting or other step do I need to take with FF so when I click the image in the PDF I link to a web page like I do when I click the link in the PDF?
Thank you!Your above posted system details show outdated plugin(s) with known security and stability risks.
# Adobe Shockwave for Director Netscape plug-in, version 10.2
# Adobe PDF Plug-In For Firefox and Netscape 8.2.4
# Shockwave Flash 10.0 r22
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Adobe Reader]] plugin to the latest version.
*http://get.adobe.com/reader/otherversions/ -
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, V
I'm working on a 64 bit windows 7 ultimate system and I can't get the Oracle.DataAccess and Oracle.Web to load on the helloworld web page
See error below. At the very end i have the gacutil output. Also, the same dll's work on a 32 bit windows 7 system. I've also tried to load the beta version of the odac 64 bit
but it it gets a "java stopped working error"
Thanks in advance
WEB PAGE ERRORVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
Server Error in '/test/helloworld' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: Could not load file or assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 37: <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
Line 38: <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
Line 39: <add assembly="Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/>
Line 40: <add assembly="Oracle.Web, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89B483F429C47342"/></assemblies>
Line 41: </compilation>
Source File: C:\inetpub\wwwroot\test\helloworld\web.config Line: 39
Assembly Load Trace: The following information can be helpful to determine why the assembly 'Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342' could not be loaded.
=== Pre-bind state information ===
LOG: User = IIS APPPOOL\DefaultAppPool
LOG: DisplayName = Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
(Fully-specified)
LOG: Appbase = file:///C:/inetpub/wwwroot/test/helloworld/
LOG: Initial PrivatePath = C:\inetpub\wwwroot\test\helloworld\bin
Calling assembly : (Unknown).
===
LOG: This bind starts in default load context.
LOG: Using application configuration file: C:\inetpub\wwwroot\test\helloworld\web.config
LOG: Using host configuration file: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\Aspnet.config
LOG: Using machine configuration file from C:\Windows\Microsoft.NET\Framework64\v2.0.50727\config\machine.config.
LOG: Post-policy reference: Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f429c47342
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.DLL.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/Temporary ASP.NET Files/test_helloworld/480589f5/895d06ab/Oracle.DataAccess/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess.EXE.
LOG: Attempting download of new URL file:///C:/inetpub/wwwroot/test/helloworld/bin/Oracle.DataAccess/Oracle.DataAccess.EXE.
Version Information: Microsoft .NET Framework Version:2.0.50727.4927; ASP.NET Version:2.0.50727.4927
gacuil output
VVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVVV
C:\Users\Administrator>C:\"Program Files"\"Microsoft SDKs"\Windows\v6.0A\Bin\x64
\gacutil.exe /l Oracle.DataAccess
Microsoft (R) .NET Global Assembly Cache Utility. Version 3.5.21022.8
Copyright (c) Microsoft Corporation. All rights reserved.
The Global Assembly Cache contains the following assemblies:
Oracle.DataAccess, Version=2.112.1.1, Culture=neutral, PublicKeyToken=89b483f4
29c47342, processorArchitecture=x86
Edited by: burk_s on Jun 6, 2010 2:42 PMHi Mubarak,
Please firstly make sure you installed SharePoint Foundation 2010 with SP2 in a Windows Server 2012 R2. Since only SP2 slipstream installations are supported on Windows Server 2012 R2
http://blogs.technet.com/b/stefan_gossner/archive/2014/05/03/sharepoint-2010-sp2-and-windows-server-2012-r2.aspx
http://blogs.technet.com/b/stefan_gossner/archive/2013/09/19/slipstream-version-of-sharepoint-foundation-2010-with-sp2-included.aspx
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
How to fix CUPS corrupted (Dyld Error Message: Library not loaded: /usr/lib/libcups.2.dylib)?
Hello,
After trying to change my printer settings on CUPS administrator area to allow to share my wirelless printer to my VirtualBox environment (somehow virtualbox doesn't detect my wirelless printer) I notice that this area stop to work. After it I try to update the CUPS by installing a new version. I admint that I am a newby in unix environment and I downloaded the CUPS v1.6.1 and installed through the terminal,
./configure
sudo make
make install
After restarting apple site no longer opened like also my home page. Other programs also stopped working and always warn about the same error described bellow. I posted my last try which was reinstall my system Snow Leopard (Mac OS X 10.6.8). Does anyone deal with this problem before? How can I reinstall at least the operation system or just fixing this library will solve the problem?
Note: The reason of using virtualbox is that I need to use a prescribed software that only works in windows environment and since I need to make work in other places the wireless printing is the only viable way to do this.
Process:
Install Mac OS X [58962]
Path:
/Volumes/Mac OS X Install DVD/Install Mac OS
X.app/Contents/MacOS/Install Mac OS X
Identifier:
com.apple.installassistant
Version:
Build Info:
InstallAssistant-480000~1
Code Type:
X86 (Native)
Parent Process: launchd [207]
Date/Time:
2013-02-11 01:18:18.198 +0000
OS Version:
Mac OS X 10.6.8 (10K549)
Report Version: 6
Interval Since Last Report:
48784 sec
Crashes Since Last Report:
10094
Per-App Crashes Since Last Report: 9
Anonymous UUID:
D1A4D697-3F20-4799-9396-A5CEDA61BC62
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: /usr/lib/libcups.2.dylib
Referenced from:
/System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/P rintCore.framework/Versions/A/PrintCore
Reason: no suitable image found. Did find:
/usr/lib/libcups.2.dylib: mach-o, but wrong architecture
/usr/lib/libcups.2.dylib: mach-o, but wrong architecture
Binary Images:
0x8fe00000 - 0x8fe4163b dyld 132.1 (???)
<4CDE4F04-0DD6-224E-ACE5-3C06E169A801> /usr/lib/dyld
Model: MacBookPro5,5, BootROM MBP55.00AC.B03, 2 processors, Intel Core
2 Duo, 2.26 GHz, 2 GB, SMC 1.47f2
Graphics: NVIDIA GeForce 9400M, NVIDIA GeForce 9400M, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8D),
Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: FUJITSU MJA2160BH FFS G1, 149,05 GB
Serial ATA Device: HL-DT-ST DVDRW GS23N, 7,24 GB
USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8507, 0x24400000 / 2
USB Device: Internal Memory Card Reader, 0x05ac (Apple Inc.), 0x8403,
0x26500000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.),
0x8213, 0x06110000 / 4
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.),
0x0237, 0x04600000 / 3
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 2andHere is another option.
I had the same problem with my Mac OSX System 10.8.4 after update cups from 1.6.2 to 1.6.3.
I have a MacBookPro with the same system version and copy the libcups.2.dylib file form /usr/lib/ then replace the error file in my other Mac.
1. Install cups 1.6.2 again
2. Replace the file libcups.2.dylib in /usr/lib/ directory with this one libcups.2.dylib
Note: I added the link if you dont have an other mac in the same version available.
This works for me. -
HELP! I had iPhoto on my mac, for some reason it was not responding or damaged. down loaded a new version but can't find my photos. any ideas please. I thought once on the mac always on the mac.
Sorry but we need details to help
What version of the OS do you have? What has changed since iPhtoo worked?
What exactly is the problem - you say "it was not responding" - You downloaded a new version (what version)" -you can't find yoru photos" none of which is helpful
look in your applications folder - is there an Iphoto application there? If so get info and report the version
Look in the picures folder - is there an iPhoto library there? If so exactly (including exact error messages) happens if you double click on it?
what else can you tell us that might help us assist you?
LN -
My latest MVC 5 project built with VS 2013 compiled and works fine on my PC but can not be published to server using command line aspnet_compiler. I kept getting the web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'
In my web.config file, I have the following as suggested by many for solution:
<add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
<add assembly="System.Data.Entity.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
However, the error is persisting. I have no clue how to fix this. Hope someone can help.Hello FredVanc,
As you mentions, it could work with your develop environment, so I am wondering it is that on the server machine, the assembly is not there actually. Here are some information I found which might be helpful:
https://support.microsoft.com/en-gb/kb/958975?wa=wsignin1.0
https://social.msdn.microsoft.com/Forums/en-US/1295cfa8-751b-4e9b-a7a7-14e1ad1393b6/compiling-error?forum=adodotnetentityframework
By the way, since this issue is related with ASP.ENT project, I suggest that you could post it to the ASP.NET forum, there are web experts will help you:
http://forums.asp.net/
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
Hello, (Bit of a long one but please read) We have 3 servers in same physical location and server OU etc that are exhibiting the exact same behaviors (we have server servers in this location that are not), as above theyt are all W2008 R2 SP1 and all
-
Oracle 10.1.0.4 SDO_GEOMETRY and ArcSDE 9.1 SP1
We are having a few of issues that I'm hoping someone can shed some light on. 1) In SDE.SPATIAL_REFERENCES table when using SDO_GEOMETRY is it normal to get two instances of a spatial reference one with the ESRI coord sys string and one with the Orac
-
All Those out there Running V12 on the unlocked Vodaphone N97. That are now on 02 V20 is now ready for download on the Nokia updater Suite Or Ovi Suite In the UK Ps don't forget to backup all the stuff on your N97 first on Nokia suite. The update
-
Hi experts, In a sales order we have four materials, say material A, material B, material C, material D and we delivered only three materials due to lack of stock of material D.We delivered the goods to customer. Here customer is asking for Material
-
Has anyone run the 64-bit JVM (-d64) on Solaris 8 or 9? 1.4.1 http://java.sun.com/products/archive/j2se/1.4.1_05/index.html 1.4.2 http://java.sun.com/j2se/1.4.2/install-solaris-64.html Support tells me BEA has not certified WLS for use with the 64-bi