In View, I want Bookmarks to be the default not History which is what is happening

In View, I want Bookmarks to be the default not History which is what is happening. I don't know why but I like using History but I primarily use Bookmarks.

Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro.  If I want to read on my mac I have to use Kindle or Nook.  Which means any book I've already purchased through iBooks has to be read on my iPad.  Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

Similar Messages

  • How can I link to a chapter in iBooks Author? I just want a link to the chapter, not to a bookmark

    How can I link to a chapter in iBooks Author? I just want a link to the chapter, not to a bookmark.
    But something like: "This was explained in Chapter 5." Where "Chapter 5" is a clickable hyperlink.
    Also, when I add a new chapter before chapter 5 this should automatically change to:
    "This was explained in Chapter 6."
    I could use a bookmark (e.g. to the first word in Chapter 5) but this would be not right.
    Gerriet.

    Use "Link to: A file" in the link inspector.

  • I am confused about something.  How do I read a book on my MacBook Pro?  I can't find the iBook app anywhere, which is what I use on my iPad.  The book I want to read is in my iTunes but I can't click on it.  My iBook library does not show up in iTunes.

    I am confused about something.  How do I read a book on my MacBook Pro?  I can't find the iBook app anywhere, which is what I use on my iPad.  The book I want to read is in my iTunes but I can't click on it.  Some of my iBooks show up in my iTunes but they are "grayed" out.  The only books that respond in iTunes are audiobooks and that's not what I'm looking for.  Is this a stupid question?

    Nevermind - I answered my own question, which is I CAN"T READ ANY BOOKS I purchased in iBooks on my MacBook Pro.  If I want to read on my mac I have to use Kindle or Nook.  Which means any book I've already purchased through iBooks has to be read on my iPad.  Kind of a drag because there are times when it's more convenient for me to read while I'm sitting with my Mac.

  • MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

    MY hard drive crashed and I had to replace it. Now when I try to sync my iPod with iTunes it says that I have to replace the old library (that is lost forever) with the new library to sync. I do not want to lose all the songs on my iPod! What can I do?

    Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • I do not want Bridge to be the default program for opening folders.

    I have recently upgraded from CS5.5 to CS6 Design and Web Premium. Since my upgrade, when I click on any “folder” IExplorer no longer is my default browser for my folders. Bridge now opens all my folders. This is very annoying. I DO NOT want Bridge to be default. I tried uninstalling Bridge and it did not work, Bridge must have corrupted my registry.
    When I tried to open a folder it warns me there is no program associated with this file. This is unbelievable that Adobe would do this. Why would you not give the user a chance to choose if they wanted Bridge to be the default folder browser. Or at least have an easy way to revert it back to IE.

    I HATE that every time I try to open a “FOLDER” Bridge opens.
    It seems the Adobe Forums are unreachable due to an update but using email I do respond nevertheless.
    To be Honest, I don't understand how you are able at all to start Bridge when opening a folder?? Can you report back with details of System and version info of Bridge and maybe explain your workflow?
    And Bridge is only slow for the first time, it needs to cache files first. Which brings me to the point that Bridge is a file browser and not so much as a folder browser. You can use the folder panel for an overview of the system content and folder structure and for fast and easy navigating.

  • Do not want launchpad to be the default import on images

    I have the new mac pro (late 2013) and lightrrom 5 on os 10.10.2 .  i import a lot of raw image files but when i do this on the new mac the launchpad wants to improt the files.  I want LR to be the default software to import the files ( Like my old mac did!) can anybody help to turn off  the launchpad prefreance and add Lr?
    tahnsk
    john

    I HATE that every time I try to open a “FOLDER” Bridge opens.
    It seems the Adobe Forums are unreachable due to an update but using email I do respond nevertheless.
    To be Honest, I don't understand how you are able at all to start Bridge when opening a folder?? Can you report back with details of System and version info of Bridge and maybe explain your workflow?
    And Bridge is only slow for the first time, it needs to cache files first. Which brings me to the point that Bridge is a file browser and not so much as a folder browser. You can use the folder panel for an overview of the system content and folder structure and for fast and easy navigating.

  • Firefox by default opens the last used profile. I want it to open the default profile always unless specified with -P option

    To make it more clear. If I use the following command
    firefox -P profileRare
    and then close the firefox, When I open the firefox again with by giving
    firefox
    It opens the profileRare again. Is there anyway to override this behaviour and open default profile when I call firefox without -P option?

    Make sure that the profile that you want to use as the default is set as Default=1 in the file [http://kb.mozillazine.org/profiles.ini_file profiles.ini]
    If you use -P "profile_name" then the selected profile shouldn't change. Only if you use the profile manager and select a new profile then that profile will become the last selected profile, so make sure that "Don't ask at startup" is selected.

  • My iMac doesnt want to read/run the Mac OS X Install DVD, what can I do?

    My iMac doesnt want to read/run the Mac OS X Install DVD, what can I do? What I want to do is format my mac, so I need to run de DVD Installer when the Mac start up holding C buttom. Is there any other way to do it?

    You must be using the original grey OS X discs that shipped with the machine or a retail OS X installation disc.
    If you are attempting to use a grey OS X disc that did not ship with your iMac, it will not work since they are machine-specific.
    Other than those reasons, it is possible the disc is dirty or scratched, or your optical drive has simply failed. In the latter event you need to replace it or use an external optical disc drive, or boot your iMac in FireWire Target Disk Mode and use another Mac to read the disc.

  • I bought Adobe Creative Suite 6 and downloaded it a few months ago. But I never installed it. Now I want to install it but can not download it again, what should I do?

    I bought Adobe Creative Suite 6 and downloaded it a few months ago. But I never installed it. Now I want to install it but can not download it again, what should I do?

    There should not be any reason you cannot download it, unless you are referring to not having a link in your account for it.
    CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
    You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

  • Once I downloaded the new IOS 5.0 I've lost all of my photos that were stored on my PC, and I no longer have access to them on the IPOD.  Cannot figure out what has happened.  Please help.

    Once I downloaded the new IOS 5.0 I've lost all of my photos that were stored on my PC, and I no longer have access to them on the IPOD.  Cannot figure out what has happened.  Please help.

    Thanks lllaass, but I am not computer literate and do not understand exactly what it is I am supposed to do.  All of my photos were stored on Microsoft Windows Live Photo Gallery.  When I now access the gallery the only thing that is there are the folders with the title of the folders.  The pictures that were in those folders are now gone. I can no longer access them on my IPOD either.  My photo library on my IPOD is now empty. 
    Thanks again for your help.

  • HT1338 When I email an attachment with "Always Sent Windows-Friendly Attachments" checked, the result is a picture embedded in the body of the email, not a attachment.  What am I doing wrong.

    When I email an attachment (a .jpg file) with "Always Send Windows-Friendly Attachments" checked, the result is a picture embedded in the body of the email, not a attachment.  What am I doing wrong.

    1. "Always Send Windows-Friendly Attachments" has nothing to do with the display of attachments on either your machine or other ones. It's an esoteric setting that strips the resource fork from Mac files (that might have them) which could apper as a duplicate file on the Windows machine.
    2. Send Plain Text emails. Then it will always be received as an attachment.

  • HT1320 My Ipod classic is frozen with the "do not disconnect" logo on what can I do to un freeze it?

    Hi my ipod classic is frozen with the "Do Not Disconnect" sign on what can I do to unfreeze it ?

    I plugged my ipod video into my xBox 360 and
    disconnected it. My ipod froze with the do not
    disconnect sign on it, i tried to unfreeze it(I read
    the support section) but it won't do
    anything.
    Dell Optiplex
    GX1p   Windows XP  
    This happened to me aswell, but it happened to me when I plugged it into the PC but same problem. what you have to do is move the 'Hold Switch' to put it on hold and then move it back again and then hold both the 'Menu button' and button in the middle of the click wheel. then it will turn off and then come up with the Apple logo and then it will work fine and you can try again. (P.S: If it doesnt show the Apple logo just try pressing any button
      Windows XP  

  • How can I change the default note in adobe reader

    How can I change the default note in adobe reader

    Can you please explain your issue in detail? Are you talking about sticky notes? What 'default' state would you like to change?

  • When trying to up date firefox it tells me just to save the file not to run t, what do I need to do?

    when trying to up date firefox it tells me just to save the file not to run t, what do I need to do?
    == This happened ==
    Every time Firefox opened

    Download the latest version from here: [http://www.mozilla.com/en-US/]
    Then run the installer and it'll update you to the latest version.

  • After repairing permissions, in Mac OS X, I ask the utility to verify permissions again and the same problems are shown, as if I had not repaired anything. What's happening?

    After repairing permissions, in Mac OS X, I ask the utility to verify permissions again and the same problems are shown, as if I had not repaired anything. What's happening?

    What you are seeing are messages. It's ok.. it won't do any good to repeatedly repair permissions. As long as you see Repair Permissions Complete when it's finished, you are good to go.
    Also, if you see any messages that say: SUID: That can be ignored.
    Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
    Keep in mind, the only time you need to repair permissions is for troubleshooting.

Maybe you are looking for

  • Network shared printers stop working; default printer changes

    Hello, Have an odd printing issue that seems to be ongoing and am trying to come up with a good solution or fix for it. We have an environment that has a Windows 2012R2 Print Server, that is sharing various printers which are also set to List in Dire

  • Inactive status  - v$session  users list over WEB application

    Hi all When user connect through asp or asp.net, we create a connection in the session object. New sid gets created with each session. When user normally logs out the application, his sid gets finished in the v$session users list. But when he dees no

  • 8100 turning on then off repeatedly

    I have a Blackberry Pearl 8100 that started turning off and on today and is not stopping.  When it turns on you see the hour glass for about 20 secs and then it turns off and starts again.  Everything was working fine earlier today and then suddenly

  • Where is the serial number?

    i just downloaded a free trial of photoshop and have been prompted to enter the serial number.  I never received it.  where do i go from here?

  • Mac OS X Leopard Desktop

    Hi, I'm trying to find out if it is possible to somehow generate a floating layer (shape) which can sit on my desktop as a method of distinguishing between some icons and other icons. When I am working I generate alot of files (graphics, data etc) wh