In vl71, i can't find the DN which i picked

Hi,guys. I'm a fresher in Logistics.
I picked a DN, and confirmed the status is fully picked. And i check the document flow, it told me like this :
Document                                                   Date                                  Overall processing status
. Liquid sales order 40110530                   10.06.02                            Completed
Outbound delivery 200345696                   10.06.02                            Being processed
. Handling unit 1000636137                        10.06.02
. Picking request 20100602                        10.06.02                            Completed
. GD goods issue:delvy 4900734190         10.06.02                            complete
So i want to print the DN: 200345696, but get the message: No messages for initial (& repeat ) processing exist. That means i can't find this DN in VL71. What can i do to fix it?

Hello Cui
First you need to establish if an output was determined for the delivery. To do that, go into the Delivery in change mode and using menu path Extras/Delivery Output/Header, go into the output screen. There see if you have any output/s in Red/Yellow status. If you see any such, check the processing log using the square icon. This means an output was determined but was not successfully processed. If you see no outputs listed, using menu path Go To/Determination Analysis, get into a screen from which you can determine why no output could be found. But you should know which output type you are dealing with to check all these pieces. If you are stuck anywhere down the path, let me know. Good luck.

Similar Messages

Please help, I can't find the pictures which I took with my camera. Its like I never took them

I can't find the pictures which I took on my camera, I still have lots of memory left, they are hidden or something . Oh and the other thing is that when I'm trying to save a picture as something that I like its say the the directory is full even when I put a single letter. I have a huge space on my memory card, I don't know what's wrong . Please help. Thanks

See if you can boot into safe mode by holding down the shift key immediately after pressing the start button. Keep holding the shift key till a loading progress bar appears on the lower part of the screen. It will take a lot longer than normal to start this way. If you have Lion 10.7 installed you can try holding command-R keys to get intto recovery mode and run disk utility.
If you want some great tips on trouble shooting go to this link to frequent poster ds store's page.
ds store's User Tips https://discussions.apple.com/people/ds%20store?view=documents
This one covers your problem https://discussions.apple.com/docs/DOC-3392

How can I find the program which is calling my SAPscript??

How can I find the program(std/Custom) which is calling my SAPscript form??
Regards,
Shashank.

Hi
check in NACE transaction or TNAPR table
reward points to all helpful answers
kiran.M

How can i find the tables which dont contain any data under my database ?

Can you please suggest me a way to find the tables which dont contain any data under my database ?
Regards,
Renu

Can you please suggest me a way to find the tables which dont contain any data under my database ?
For the schema that you've logged in to, you could do something like this:
test@XE>
test@XE> @test
test@XE> --
test@XE> set serveroutput on size 1000000
test@XE>
test@XE> declare
2    n_count number;
3 begin
4    for rec in (select object_name from user_objects
5                where object_type = 'TABLE')
6    loop
7      execute immediate 'select count(*) from '||rec.object_name
8      into n_count;
9      if (n_count = 0) then
10        dbms_output.put_line(rec.object_name);
11      end if;
12    end loop;
13 end;
14 /
BONUS
RUN_STATS
PL/SQL procedure successfully completed.
test@XE>
test@XE>For the other schemas, you could query from dba_objects and probably display the owner as well.
HTH
isotope

How can I find the profiles which are not in a role

Hi all,
how can I find all profiles which are not used in a role. Its important for a security check.

Hi Stefan,
you do one thing use the transaction SUIM
SUIM>>Profile>>By Roles
give all the role name and execute you will get roles with profiles
and extract to excel sheet
to get only profiles
suim>>profile>>by profile name or text give * and execute
and extract in excel sheet no compate profile coloumns get the profiles which does not there in any roles
hope ds helps
thanks
kishore

Can't find the bean which was just created??

Hi all.
I am completely stuck at this problem. I'll try to explain it as briefly as possible. (Btw I use Weblogic 8.1 and Oracle 10g DB).
I create an entity bean (it has a String as a primary key). It has some relationships, everything is set up nicely. Upon creation I put the Id in a JMS message, the message in a JMS queue and finish the method.
From the MDB that gets this message I do findByPrimaryKey(id) and it complains it cannot find my bean. Why? I can see it in the database. Also if I send to the MDB an ID from a bean that was created earlier, it works. It just can't find the bean that was just created, as if it wasn't "commited".
What could be the cause of this? Is there an easy way to explain/solve it?
I appreciate any kind of help. Thanks in advance. Cheers!

Does the database insertion and the JMS publish occur in the same XA
transaction? It sounds like the JMS commit happens (sometimes) quick
enough that the other resource (the database) has not finished commit
processing yet. So you don't find your key.
-- Rob
Baba Baba wrote:
Hi all.
I am completely stuck at this problem. I'll try to explain it as briefly as possible. (Btw I use Weblogic 8.1 and Oracle 10g DB).
I create an entity bean (it has a String as a primary key). It has some relationships, everything is set up nicely. Upon creation I put the Id in a JMS message, the message in a JMS queue and finish the method.
From the MDB that gets this message I do findByPrimaryKey(id) and it complains it cannot find my bean. Why? I can see it in the database. Also if I send to the MDB an ID from a bean that was created earlier, it works. It just can't find the bean that was just created, as if it wasn't "commited".
What could be the cause of this? Is there an easy way to explain/solve it?
I appreciate any kind of help. Thanks in advance. Cheers!

When create heirarchy, can not find the entry which is in master data

Hi, SDNs
When create a heirarchy for a char , click this char button to add a fields to a node, i can't search the value which is actually in the master data.
Thansk for your time

If you go to create hierararchy or change mode of hierarchy
3 types of nodes you can create
1)Text node
2)Charecteristic node
3)Infoobject values node
text node - is simple any text node you can create
infoobject values node - if the master data is loaded you can create it
if master data is loaded make sure its activated and no master data is under "M" version.
charecteristic node - only if particular infoobject node is included in the tab "external chars in hierarchies" in RSD1 of that particular infoobject
Hope it Helps
Chetan
@CP..

How can I find the words which spans across end of line to next line in pdf ?

I am using Acrobat Adobe X Pro version for our form development and maintanence. I am writting a Acrobat JAVA batch script which reads through all the words and execute spell check and reports the mispelled words in a excel sheet. Since I am running this script in batch mode for more than 1000 pdfs - I am getting many words joined together. When I looked in to those pdfs all such words are looking okay because it is appearing in end of right margin and the next word is in the next line. Since there was no space between them it was extracted as a single word. Hence the failure.
I used wordf = this.getPageNthWordQuads(i,j) to get the word begin and end coordinates. when I closely observe the values are creating a rectangle and that doesnt span across lines. I got the coordinates for the regular word and the word which span acoross two lines. both of the coordinates are same.
I think I am screwed - I have 8000 such words and no clue of how to get rid of them from the actual misspelled words.
please help. let me know if any class /method if I call will give me the end of line or do I need to go to next layer to find this split.
the addnot is somehow marking the words using this coordinates - please hellp me understand how this works. Thanks.
// for all pages
for (var i = 0; i < this.numPages; i++ )
// For all the words
pg += 1;
numWords = this.getPageNumWords(i);
for ( j = 0; j < numWords; j++)
//get the spell check
ckWord = spell.checkWord(this.getPageNthWord(i,j))
if ( ckWord != null )
jn=0
ml=0
// if mispelled word found.
wordf = this.getPageNthWordQuads(i,j)
swordf = wordf.toString()
var st = swordf.split(",")
var diffx0 = parseInt(st[0])-8
var diffx1 = parseInt(st[1])-8
var diffx2 = parseInt(st[2])-8
var diffx3 = parseInt(st[3])-8
var diffx4 = parseInt(st[4])-8
var diffx5 = parseInt(st[5])-8
var diffx6 = parseInt(st[6])-8
var diffx7 = parseInt(st[7])-8
if (cWord == csword)
jn = 1
if ( st[1] != st[3] )
ml = 1
//dataLine += "\r\n write "
else
ml=2
dataLine += "\r\n"+this.documentFileName
+ "\t" + this.getPageNthWord(i,j)
+ "\t" + pg
+ "\t" + j
+ "\t" + ml
+ "\t" + jn
+ "\t st[0] " + diffx0 + "\t st[1] " + diffx1 + "\t st[2] " + diffx2 + "\t st[3] " + diffx3
+ "\t st[4] " + diffx4 + "\t st[5] " + diffx5 + "\t st[6] " + diffx6 + "\t st[7] " + diffx7
ck=1

If Acrobat is reading each word part as separate words, you have a problem.
The way I approached it in some of my tools was to check if a word ends
with a hyphen, and if so, to check if it's the last on the line. If both
conditions are true, combine with the next word on the next line. This is
not fool proof, of course, as there are documents with columns are other
structural elements that prevent this from working. Better than nothing,
though...
However, it is also possible that Acrobat does see both parts as parts of
the same word. In that case, getPageNthWordQuads() will return multiple
quads arrays. As you know, that method returns an array of quad arrays.
There's usually only one, but in principle there could be more... Something
to check before giving up.

In iPhoto, how can I find the videos which are used in iMovie?

My overall goal is to split my iPhoto library, because it's taking up half my HD. (Proud dad, taking too many burst photos and videos of the little guys). I'll put the videos and older-year photos onto an external drive.
Problem is - I can't figure out which iPhoto video clips are in my Huge Home Movie, which has about 5 minutes from every month from 2008-2011.
Is there a way that I can find them? Perhaps I can flag or rate them in iMovie? Perhaps a smart album in iPhoto?
Details:
iMovie '11 (9.0.9)
iPhoto '11 (9.4.3)
Willing to upgrade to newer versions if they solve the problem.

Restore solved it!

HT1848 I can't find the "Authorize Computer" button on the Itunes Store menu

I am trying to give my computer the ability to access the music I buy with my Iphone. Yet, I can not find the button which was said to be in the Store menu.

Authorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
Also see, iTunes Store- Authorize or deauthorize your Mac or PC

Where can i find the link to Ordering Apple Product Professional certificate and pin?

I have registered in apple sales training online,i work in reliance digital and i had completed my apple product professional level in last few days but i can't find the link which can order the ASTO app kit link....please suggest me.

PSE 10, 11, 12 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

I have bought a film from itunes and the credit has come out of my account, but i can't find the film anywhere, it said it was downloading, then i left the laptop and on return i couldn't find the film. how do i find the film?

i have bought a film from itunes and the credit has come out of my account, but i can't find the film anywhere, it said it was downloading, then i left the laptop and on return i couldn't find the film. how do i find the film?

Maybe it is in the Purchased category of iTunes,
Try going there

My external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive. Same thing has happened with Final Cut Express.

My new LaCie external hard drive is 'seen' by my iMac and I can go into the Finder and open files and folders. I am using the hard drive for Time Machine back up. However Time Machine says it can't find the drive.
The same thing happened recently between Final Cut Express and my other LaCie external hard drive used as the Scratch disk. It fixed itself.
I've run out of ideas. Help would be very much appreciated. Thanks.

have you done some searches on FCPx and time machine? Is there a known issue with using a TM drive with FCPx? dunno but ...wait...I'll take 60 sec for you cause I'm just that kind of guy.... google...." fcpx time machine problem" Frist page link
http://www.premiumbeat.com/blog/fcpx-bug-best-practices-for-using-external-hard- drives-and-final-cut-pro-x/
You cannot have time machine backups on your hard drive if you intend to use it in FCPX.
booya!

Fire Fox sent not all the data in text form. Reached only piece of information. Where can I find the cache of sent text?

Fire Fox sent not all the data in text form. Reached only piece of information. Where can I find the cache sent the text?
For example, I posted an article on a news site, but found that only a small part of my article was posted.

I'm not sure whether Firefox saved that information. There is a chance that it is in the session history file, especially if you haven't closed that tab yet. To check that:
Open your currently active Firefox settings folder (AKA your Firefox profile folder) using
Help > Troubleshooting Information > "Show Folder" button
Find all files starting with the name sessionstore and copy them to a safe working location (e.g., your documents folder). In order to read a .js file, it is useful to rename it to a .txt file. Or you could drag it to Wordpad or your favorite word processing software.
The script will look somewhat like gibberish, but if you search for a word in your article that doesn't normally appear in web pages, you may be able to find your data.
Any luck?
For the future, you might want to consider this add-on, although I don't know how long it saves data after you submit a form: [https://addons.mozilla.org/en-US/firefox/addon/lazarus-form-recovery/].

Help:Can not find the file in jar!

Hello everyone:
I build a project using Netbeans 5.0 and make a jar file with it...
The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
String dataFilePath = getClass().getResource(dataFile).getPath();
//System.out.println("filepath:"+dataFilePath);
InputStream input = new FileInputStream(dataFilePath);
when I run the project with the main() function as an entry it works perfectly and output:
filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
But when I compressed the project with jar and run it , it will show:
filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
there is a (!) between search.jar and /com/cn/wxjt...
I dont know why I generate a ! symbol in the file path... Is it cause the exception->
java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
If you have any idea, plz tell me.
Thank you and best wishes to you !
:)

If the file you want to read is in your jar file, use
getClass ().getResourceAsStream
(relative_path_file_name)Hope that help,
Jackhey jack i want to open the file as new File
i m using this.getClass().getResource("resource/backend.xml");
the resource is the directory inside the jar file.
when i prints the url it shows:
the jar file is in the WORK directory
URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
now when i creates new File using the url.getFile() method the file does not exist.
although the same programs runs well when i uses the InputStream
so plz tell me cant I create a new File from the above method????
thanks in advance
with regards
neeraj

In vl71, i can't find the DN which i picked

Similar Messages

Maybe you are looking for