In what order what components needed to be configured in ODI?

I will be migrating data from TXT files to Oracle 10g.
In what order what components/objects (e.g. Project, Models, topology, data store, metadata, schema etc) needed to be configured in ODI?
This will help me go through ODI manual in a logical order.

Hi,
Have a look as a kick off,
http://www.oracle.com/technology/obe/fusion_middleware/odi/ODIproject_flatfile-to-table/ODIproject_flatfile-to-table.htm
Thanks,
Guru

Similar Messages

ICSS components need to be activated

Hi,
We are implementing ICSS B2C scenario for Complaints.
What are the Components need to activate in the CRM server for ICSS process.
Regards,
Pavan.

Hello,
Please see http://help.sap.com/saphelp_crm50/helpdata/en/b4/39f1bc39dce34a85fbe0965c8bd0f8/frameset.htm this should assist you on this matter.
Mark

Components need to be installed for AII

what are the components need to be installed for AII ,to access remotely located AII server. Requirement is for RFID implementation.

Hi
Refer this thread on RFID implementation if it helps u RFID Std content
Message was edited by:
Anusha Ramsiva

HP 15-d030nr: What Upgrades Do I Need To Make In Order To Be Able To Use Adobe After Effects CS6?

HP 15-d030nr, what upgrades do I need to make in order to be able to use adobe after effects cs6?
I installed Adobe After Effectss CS6 because I was told by HP Support that it would still work; it doesnt. It is very slow, and locks up bad. What upgrades do I need to do, or am I looking at having to go buy another labtop? Also, can I do these upgrades myself - at what cost?
**HP 15-d030nr**
Hardware
Product Name 15-d030nr
Product Number F5X99UA
Microprocessor 2.0GHz Intel Pentium N3510 Processor
Microprocessor Cache 2MB L2 Cache
Memory 4GB DDR3L SDRAM (1 DIMM)
Memory Slots 2 user accessible
Video Graphics Intel HD graphics
Display 15.6-inch diagonal HD BrightView LED-backlit touchscreen display (1366x768)
Hard Drive 500GB 5400RPM hard drive
Multimedia Drive SuperMulti DVD burner
Network Card 10/100BASE-T Ethernet LAN (RJ-45 connector)
Wireless Connectivity 1x1 802.11b/g/n WLAN
Sound HD Audio with stereo speakers
Keyboard Full-size island-style keyboard with numeric keypad
Pointing Device Touchpad supporting multi-touch gestures without on/off button
External Ports Multi-format digital media card reader for Secure Digital cards 1
SuperSpeed USB 3.0
2 Universal Serial Bus (USB) 2.0
1 HDMI
1 VGA (15-pin)
1 RJ-45 (LAN)
1 Headphone-out/microphone-in combo jack Dimensions 1.11 in (H) x 14.88 in (W) x 10.20 in (D) Weight 4.96 lb Power 45W AC adapter
3-cell 31WHr 2.8Ah lithium-ion polymer battery ID Mech Description Front facing HP TrueVision HD Webcam with integrated digital microphone
**After Effects CC (2014) system requirements and language versions Windows**
Intel Core2 Duo or AMD Phenom II processor with 64-bit support
Microsoft Windows 7 with Service Pack 1, Windows 8, or Windows 8.1
4 GB of RAM (8 GB recommended)
5 GB of available hard-disk space; additional free space required during installation (cannot install on removable flash storage devices)
Additional disk space for disk cache (10 GB recommended)
1280 x 1080 display
OpenGL 2.0–capable system
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certifi ed GPU card for GPU-accelerated ray-traced 3D renderer
Internet connection and registration are necessary for required software activation, validation of subscriptions, and access to online services.*
*I also have a 1TB external hardrive*
This question was solved.
View Solution.

Your problem is that the program wants a good video card and a fast hard drive and lots of memory and you have none of the above. If you upgraded the RAM to 8 gigs and installed a solid state hard drive you might make the program useable but the real bottleneck is going to be the Intel HD graphics, which cannot be upgraded.
You do have an open slot to add one 4 gig memory module. This is an easy relatively inexpensive upgrade. See here:
https://www.youtube.com/watch?v=L7FvZ-JduRM
http://www.crucial.com/usa/en/ct51264bf160b
I would try this a step at a time. Next would be the solid state drive. That would cost maybe $150. Post back if you need more help.
If this is "the Answer" please click "Accept as Solution" to help others find it.

What are the front end tools & components needed to use Visual composer.

Hi all,
please help for the following queries.
1.What are the front end tools & components needed to use Visual composer.
2. Is it possible to view in internet explorer web reports/ Dash boards created in Visual composer.
3. How to create Webreports & Dash Boards in Visual composer.
It's Urgent waiting for responses.
Thanks & Regards,
Basava Raju

Hi James,
For Visual Composer no need any Front end tools.. you need portal connection.. to configure your visual compoer.. the visla composer it self contain all the items.. just like a Webtemplate..
all the reports.. that web based reports or dash boards we can view through Browser only..
for creating reports in visal composer.. just go thru this links..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c6b2d590-0201-0010-42ba-a53a5d422310
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7d48d999-0701-0010-5790-8b2c5ae7107d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1752b737-0401-0010-0ba3-87c3eda8c6ce
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cab252d4-0a01-0010-3984-ee345859dde6
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566
for How to Guides - Visual Composer.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86e
/people/marcel.salein/blog/2007/02/01/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-i
/people/marcel.salein/blog/2007/02/02/visual-composer-and-abap-rfcbapi-a-powerful-combination-part-ii
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/01c5d690-0201-0010-668a-b8d97d51a566 https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/16244247-0a01-0010-3294-d81c21e7e86ehttps://www.sdn.sap.com/irj/sdn/visualcomposer
regards
@jay

What are the components I need to install on my apps server

Hello All,
Our Oracle DB 10.1.0.3.0 is installed on Linux Server.
Oracle 10g Developer Site is installed on windows XP.
I have upgraded form & reports form earlier version 6.0..
Now I need to install Oracle Application Server on windows 2003 (x86) 32 bit.
I never done this b4.
My question is that ,
what are the components I need to install on my apps server to run Forms & Reports?
I am installing apps server on one machine.
But when I read documentation they said its better to install on two machine.
Regards,
Diana

Yes,
I'm sorry to tell you but for forms and reports (BI) you need to install almost everything, you need to install an infrastructure as first components, and then a midtier for AS with Business Intelligence option, in this second component you can chose to install Reports, forms, OCJ4, Portal, any other component you need or you thik you will need in the future.
You can install both in one Server if you don't have resources for 2 or 3 thinking on load balance. It works fine for me in one server but my operation is not too big.
Carlos

I have iphoto 7.1.5 and need to upgrade to use icloud. I have Mac osX 10.7.5. Which upgrades and in what order? Thank you.

I have a Macbook 10.7.5. Just got an iphone 4s and need to upgrade the iphoto on Macb to use icloud. Can you tell me how to go about it? That is, which upgrades do I need and in what order? Thank you

NOTE: if you upgrade to Mavericks you'll have to purchase iPhoto 9.5.1 from the App Store as your current version does not qualify for a free upgrade.
OT

What cable do i need to use to connect my grandson's old style external isight webcam to his 2014 Mac mini in order for him to be able to FaceTime me

what cable do i need to use to connect my grandson's old style external isight webcam to his 2014 Mac mini in order for him to be able to FaceTime me

You need either a FireWire 800 to FW 400 cable or a FR 800 (male)/FW(female) adopter.
However. it the Mini (note that you still have the late 2012 Mini, Apple has not updated the Mini since then) has Mavericks it may not work satisfactorily. I tried it on my 2102 and I get abount 1 frame every 20 seconds. Another uses posted same problem.
However, it it work fine on my late 2009 Mini with Mavericks

Need suggestions for what order to install software on new computer

I have had an iMac (with Panther) for 3 1/2 years but have never made any major changes to it and plan to leave it as it is. We got a second computer yesterday, one of the last of the white iMacs, via an Apple reseller. It came with Tiger 10.4.6 installed with a Leopard 10.5 drop-in disc and an iLife 08 disk. I set up the new Mac so I have a web connection, but have not yet transferred any data from my back-up external hard-drive, nor have I attempted to install Leopard or iLife 08. I'm looking for recommendations for what order I should do these tasks. Or does it matter?
That is, should I play around with Tiger for awhile (I've never used Tiger before), move all my data and confirm all is OK before adding Leopard?
Or should I get Leopard on the computer right as the next step?
Should iLife 08 be installed before or after Leopard? or is either order OK?
Any suggestions that would be helpful to me?

I concur with the others on going straight to Leopard. Then resolve any issues before installing non-Apple applications (or older Apple ones, for that matter).
However, make sure ANY applications are Leopard-compatible before you install them.
And note that the iLife '08 installer is for a 30-day trial installation (fully functional for those 30 days) after which it needs to be purchased.

Can't download the additional components needed to install mac os x, what shall i do?

can't download the additional components needed to install mac os x, check your internet connection and try again- that's the error always showing when im reinstalling the os on my macbook air. what shall i do? please i need help.

Not sure 10.7.3 is still available over the internet download system. I think Apple waws more on the ball this time and switched the Recovery HD system download over to 10.7.4 fairly Quickly.
That may or may not be part of your problem.
It may also be your internet connection is flakey and is dropping the connection with the download server.
If you are doing this over a WiFi connection try connecting the Mac to your router with an Ethernet cable.

What are the Standard Software Components needed to devolop Portal DC?

Dear all,
I am trying to port the code from local portal project to
DC Portal Project.
i think i have to add dependencies in the 'Used DCS' in the DC Project for the Corresponding Build Path Entries(jars).
But iam not getting the Standard Software Components where i will get the references for
<classpathentry kind="var" path="ECLIPSE_HOME/plugins/com.sap.ep.applicationDevelopment/prtapi.jar"/> <classpathentry kind="var" path="ECLIPSE_HOME/plugins/com.sap.ep.applicationDevelopment/prttest.jar"/> <classpathentry kind="var" path="ECLIPSE_HOME/plugins/com.sap.ep.applicationDevelopment/com.sap.portal.runtime.application.soap_api.jar"/>
Please tell me the Software Components needed for Portal Development while Defining Track.
regards,
Biroj.

I am assuming the following:
SAP_BUILDT
SAP_JTECHS
SAP-JEE
<OWN COMPONENT> (with as prerequisite SCs the above three)
If you had found this out already, please post in this thread.
Thanks,
Jurjen

What cable do i need to watch netflix from my ipad to the tvv

What cable do i need to watch netflix from my ipad to the tvv

Netflix does support video out. The type of cable depends on your TV. I have used the composite cable and the HDMI adapter with an HDMI cable. Both of these cables work great. There is an AV cable, but I haven't used it, but it should work also. Video quality wise the order of preference would be HDMI, AV, Composite. I bought the composite cable for traveling, because I figure most TVs in hotels would have composite inputs.

OT: What viewers do you need to use ALL audio and video files?

I had a lot of trouble with audio and video files on my PC. I
now have a
MacBook Pro, which is a big improvement. But I still
frequently
encounter files that I can't use. I try to open them, but
Apple doesn't
know what to do with them. For example, I often encounter
unusable
videos while perusing news websites. I also have some audio
files with
.mva or .mvw extensions that don't work.
So what viwers/players do I need to download in order to be
able to play
every audio/video file that comes my way? iTunes handles .mp3
files, and
I also have QuickTime installed. I just viewed another video
after I
installed a Flash plugin. What else do I need to install?
Thanks.
www.geobop.org - Family Websites
www.invisible-republic.org - Adult political websites (Mature
adults only)

VLC is a big favorite
http://www.macupdate.com/app/mac/5758/vlc-media-player

HT204382 what software do i need to play movies on avi file . have connected a external memory disk and all the movies are in avi format.

What software do i need to install in order to be able
to play movies in .avi format.
have connected an external memory and all the entertainment
files are in .avi format.
Ansver i get : does not support

VLC is a good choice. While I don't know if it will play your files, Perian is a helper app for Quicktime which allows you to play a lot of things in the Quicktime Player.
There is also Flip4Mac which allows you to play windows media files in Quicktime.
Finally, note that the extension on a video file doesn't really tell you what you need to play it. The .avi, .mpg, etc. is only the wrapper around the actual video. The video is encoded by some means and needs to be decoded. The video inside the .avi can be encoded in one of many different schemes.
VLC, Perian, Flip4Mac, and many others, are all able to decode various flavors of encoding. Having all of those in your toolbox will help to allow you to play most of the things you'll find.

What licenses do I need to get a virtual desktop environment up and running?

I’m trying to figure out what licenses I need to get a full Windows Virtual Desktop Infrastructure (VDI) up and running with the Remote Desktop Service (RDS) roles.
I have Win.Server 2012 running Hyper-V, which has about 10 different virtual machines (VM) with either Win.7 or Win.8 installed on it. These VMs will act as virtual desktops (VD) for about 200 people to remotely access and use.
My question is, what licenses do I need to support this scenario?
So far, I’m planning to purchase a few Windows Server 2012 Standard Edition with 10 Client Access Licenses ( $1414.19 each). I’m assuming that’s 1 license for the server and 10 Client Access Licenses (CAL) for users who will access the VDs. I’m also planning
to buy about 200 RDS CALs ($149 each) for the rest of the users to access the VDs. Do I need to buy additional licenses for each VM image I create (the 10 images I mentioned earlier)? These VMs are in a pooled virtual desktop collection, so they reset themselves
when users disconnect from them. If I have personal desktop collections which give unique desktops to each user and saves their settings, will my license have to change if I have that too?
At first I thought just buying the RDS CALs will allow me to install windows where ever I want, how many times I want and all I have to worry about is paying for the client access, but do I need to pay for the OS as well? So essentially I’m doubling the
license?
A side question not really related is, if I have Windows Thin PC, (which was said to come free if I have SA with another product) and bought the Windows Server license, does that come with SA and I can install Windows Thin PC as many times as I want
on which ever desktop I have that will connect to this VDI system?

The 10 server licenses are fine, but they don't help you with VDI or remote desktops. I you want to install the Remote Desktop Session Host (formerly known as Terminal Server) role on all your servers und provide remote desktops for your 200 users, 200 RDS
CALs are the right choice (per user or per device).
But if your 200 users have access to virtual desktops, you need 200 VDI licenses. It doesn't matter if you only have 10 virtual desktops if potentially all your 200 users have access to them. VDI licensing is not based on a concurrent model, so every client
that can connect to a VM needs its own license. If Windows 8 Enterprise with SA is on all your client devices, you're set because SA gives users access rights to up to 4 Win8 or Win7 VMs concurrently (local or remote). In addition
it gives them a so-called companion subscription license for personally owned, non-primary devices.
For those primary corporate devices that are without SA, you'll need to purchase a single VDA license for each device that connects to any number of your Win7 or Win8 VMs. The same applies to personally owned devices of users who don't have a primary
corporate device with SA. In other words, BYOD is supported if your primary device is under SA.
For neither VDI/SA nor VDA it does matter if users are connecting to different VM images or only one. Typically, they cannot connect to more than 4 VMs at the same time in order to stay within the licensing limits.
Benny

In what order what components needed to be configured in ODI?

Similar Messages

Maybe you are looking for