In which screen can I see profit centre MARD - PRCTL

Hi experts,
In the material master screen where can I see the MARD-PRCTL field. I am not able to find it.
Any suggestion would help. Assure of points.
Francis
Edited by: Francis Yesudas on Jun 11, 2008 2:08 PM

I got this update from early forum post:
The MARC table holds the Plant Data for Material in the material master.
The MARD table holds the Storage Location Data for Material.
The MARD table is populated when the stock level of the material is updated.
So, the subsequent fields of the table including PRCTL (Profit center) gets populated when the corresponding transactions for updating the material stocks are executed.
How do I update the stock level of the material? Goods movement?
Francis

Similar Messages

  • In which transaction can we see the address number of customer?

    Hi All,
    In which transaction can we see the address number of customer that appears in KNA1 table ADRNR field?
    I tried XD03 and VD03 transactions. I was not able to find it out. Can any one help me out to findout this.
    Thanks,
    Vinod.

    HI Vinod,
    The customer address is visible on the transaction. But to store this address in DB the whole address i sliked to a number and then stored in DB. So this addressnumber will not be in the Txnl screen.

  • I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?

    I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?

    Uninstall Trusteer software
    http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
    Remove Sophos
    https://discussions.apple.com/message/21069437#21069437

  • Which table can we see consumption and forecast values in forecast based planning

    Dear SAP Gurus,
    I am working on implementing forecast based planning for Spare parts for my client. They have one Main Plant which do purchase of Spare Parts and through Stock transfers moved to 60+ Plants from where Spares are being sold.
    Now I am carrying out SAP trial runs for a set of 160+ materials with various models and want to compare with their existing methodology of requirement calculation.
    I want to compile Consumption and Forecast data month wise for these trial materials (160+ materials in 60 Plants) . One way I thought is to go individual Material Master and looks for values in Forecast view. However it is tedious and time consuming.
    The table name shows RMCP2 and RM03M for forecast and Cons values, but I could not find the table.
    Hence I want to know which table if I can view I can get the consumption and forecast data calculated for quick copying and compilation. 
    Thanks and Regards,
    R.Velmurugan.

    Dear Mariano,
    Thanks for your valuable inputs.
    Like I could able to get the consumption values for materials using table MVER and fields GSV01,GSV02 etc.,
    What field I need refer in table PROP for getting forecast values.
    As such I could not see any column where in data are similar to Forecast view.
    Thanks and Regards,
    R.Velmurugan.

  • Nokia 6300 Broken Screen (can't see a thing) help ...

    Hi guys.
    I've got a Nokia 6300 and the screen broke the other day and I'm unable to see a thing. I can still use the phone though (blindly of course)
    I'd like to transfer my numbers from my phone to my sim and to be able to do this without being to see.
    So if someone could help me with shortcuts? I think I can press the menu key, then some numbers (am i right?) rather than up down etc etc.
    Any help would be really really appreciated as i'm stuffed without a phone at the moment!
    Thanks so much!
    Charlie

    once in main menu, i cant just go to any sub menu by pressing a number key, i have to use directional pad to go to CONTACTS, in there, press UP, (go to the last selection)it's COPY CONTACTS, an other UP, it's MOVE CONTACTS,
    choose either one, once in, you have two option, first: FROM PHONE TO SIM, 2nd: FROM SIM TO PHONE, if u select the first one, it asks : move contacts? press center to answer YES, and wait, it may takes a while, i did with 60 contacts, in about 20 seconds.
    by default, in grid mode, the upper center icon is the contacts.

  • Black screen, can vaguely see image

    About 2 years ago applecare replaced my lcd screen (actually the neck and everything)
    I can't BELIEVE the inverter is gone....
    is there some other thing it could be?
    I booted from an external hard drive last night, ran disc utility ,
    rebooted back to main drive. The computer was fine.
    I woke up this morning....black screen!
    boooohoooooo:(
    thanks
    laura

    Hey Laura,
    I booted from an external hard drive last night, ran disc utility ,
    rebooted back to main drive. The computer was fine.
    I woke up this morning....black screen!
    So this morning was that booting from the internal drive?
    If not that could be like #2 below.
    This is from the Service Manual:
    "Screen is dark, fan is running and the hard drive is spinning. You may hear the startup chime as well.
    1. Reset parameter RAM. Press Command-Option-P-R during startup before “Welcome to Macintosh” appears.
    2. The system software could be damaged. Start up from the system CD that came with the computer.
    3. Remove the user access panel on the bottom of the computer. With the unit powered on, check if a red LED is visible in the access door. If the red LED is on, power is on. If you don’t see the LED glowing red, follow the steps under the symptom “No Power”.
    4. Disconnect the A/C power cord. Place the unit in the service stand and remove the user access plate.
    Press the PMU reset button on the logic board. Refer to “Resetting the PMU on the Logic Board” mentioned earlier in this chapter.
    5. Check for external video. Connect an external monitor to the mini-VGA port. If you don’t have external video, replace the main logic board. If you do have external video, go on to the next step.
    6. Open the bottom housing and verify that all the cables are securely attached. Pay special attention to the video cable (located near the modem). If the cables are securely attached, go on to the next step.
    Warning: Whenever the bottom housing is opened for service, you must do two things:
    • You must clean the original thermal film from the surfaces joining the thermal interface layer and
    reapply thermal paste to the thermal pipe.
    • The bottom housing has four torx screws that must be tightened to at least 17 in.-lbs. If you do not
    have a torque driver, you will have to make sure these screws are tightened by hand FIRMLY, BUT
    NOT FORCIBLY. Or, purchase the service tool (076-0899) in order to ensure the thermal pipe is
    firmly mated with the top base. If the bottom housing is not securely attached to the base in this
    fashion, the CPU may overheat and become damaged.
    7. Check the connection of the video cable to the LCD flat panel display (under black tape).
    8. Replace the inverter board.
    9. Replace the LCD display. Important: If you are replacing the display, be sure to install the new display
    shield and EMI gaskets that come with the new LCD panel. Installation instructions are included with
    the new display panel. Additional display shields/gasket kits are also available separately as a kit, part
    #076-0958.
    10. Replace the neck assembly
    11. Replace the logic board.
    12. Replace the power supply board."
    So my money is on the PMU, inverter cable, inverter board or that connection on the back of the display.
    Richard
    Message was edited by: spudnuty
    null
    Message was edited by: spudnuty

  • Nothing...blank screen & can't see it in My Computer or iTunes

    Bought my 4gb nano in March. I really haven't used it much, but before now it worked, at least. First the folder icon appeared, then it just went away. I left it on to charge, everything seemed fine. When I went back...NOTHING. Screen is blank, and it isn't showing up either in iTunes or My Computer. I restarted my PC, etc. (other R's - tried the ones that were possible, considering it's not doing anything) Same computer, same setup as when it was working fine, now nothing. Can anyone help with this?
    Sandi

    Hello Sandi,
    Since you were having folder exclamation point problems beforehand, check out these links:
    iPod displays a folder with an exclamation point
    And see this detailed post by Mitch.
    Exclamation point and folder
    Check out this article from the Knowlege Base:
    iPod missing in Windows or in iTunes.
    Also your issue may be that your iPod needs to be sufficiently refreshed into disk mode.
    Disconnect your iPod from computer, reset your iPod, then put it into disk mode.
    I hope this helps you!
    ~~Kylene

  • OKEOK: in which table can I see a certain Group and its Cost Centers ?

    Hi All,
    with reference to the Standard Hierarchy for Cost Centers (OKEON) , could anyone tell me in which SAP table i can find the Cost Centers associated to a certain Group?
    Thanks a lot for your help.
    G.Rossi
    Moderator: Please, search SDN; this question has been asked several times on the forum

    Hi,
    all CO groups are stored in tables SETHEADER, SETLEAF, SETNODE. The values assigned to groups are stored in SETLEAF, for cost centre groups: SetClass 0101, SetName: the name of your cost center group (no matter if its standard hierarchy or not).
    Best reards, Christian

  • Green Screen can't see video

     Hi guy's ,  I've bought a new laptop and now all of a sudden I can't watch a video as it's a green screen.
    is there any obvious reason for this ?
    Thanks Diane
    This question was solved.
    View Solution.

    Hi Diane,
    If you're using Internet Explorer, try the following.
    Open an Internet Explorer window.
    Hold down the alt key and press x, then select Internet Options.
    Select the Advanced tab, enter a tick in the box next to 'Use software rendering instead of GPU rendering', then click Apply and Ok to save this change.
    Close all open Internet Explorer windows, then open it again and try playing a video.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • I imported a jpg file which I can sometimes see but that is usually covered up except for a tiny portion of the top. Don't know how to fix this.

    I imported a jpg file that the system covers up with purple overlay except for a small portion of the top. Sometimes I can see the whole photo. What's causing this and how can I get rid of the problem. Importing it again does not help.

    Restore as new and if ok add your back up ,however that may contain what ever has corrupted  the iOS
    I have occasionally fixed a similar issue by simply resetting the iPhone

  • What happen on my 4GS screen display.all the app are diappear and have the  background of the LED light inside the screen.can't see anything just only the line black and blue light

    I JUST HAD  A PROBLEM WITH MY IPHONE "4GS".THE SCREEN DISPLAY ARE BLANK.ALL THE APP ITS GONE.JUST HAVE ONLY "BLACK AND BLUE LINE"INSIDE THE SCREEN.ALL THE PHONE FUNCTION STILL ABLE TO RECIVED THE CALL BUT UNABLE TO MAKE PHONE CALL BECAUSE THE TAP ICON ARE GONE.

    Not sure what the origin of the problem is, but you should try deleting iDVD's preference files.
    First, close iDVD and go to your Home(YourUserName)/Library/Preferences/com.apple.idvd.plist
    Drag this plist file to the trash. iDVD will automatically create a new fresh one when you reopen it.
    Open iDVD.
    See if the main screen is now visible.
    Post back if that did not help.

  • Damaged screen can't see very well

    I am not sure what happened to my mac book screen but one day it was fine and the next day i open it up and it looks like a hole was in the screen but it was just black pixels i guess. Anyways it has progressed to the point where its all over the place and its hard to see. I was hoping my warrenty would cover it but im not sure if it was cracked or if this is just a malfunction.

    The Firefox Page Zoom feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox.
    Try the Default FullZoom Level extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/6965
    Or the NoSquint extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/2592/

  • How can i see cost centre wise employee level salary breakdown for each month ? can anybody help me.

    plz anyone help me.

    thanks, Nguyen. can i get a employee salary breakdown for each month with this tcode.

  • My Photos is empty after messing around with my iPhone but i can see my pics taking by my camera when i start Camera and i click on the buttom left corner, it opens the camera roll pics which i can't see choosing Photos

    any help will be appreciated, thank you

    Photos is an app for creating albums of photos that are ON YOUR COMPUTER. The Camera Roll is photos taken with the iPhone. You cannot transfer photos from the Camera Roll to the Photos app directly; you must copy them to your computer using a photo management app on the computer. After they are on the computer you can sync them to the Photo app.
    I suggest reading the manual, as it describes the process much better than I have. http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • I bought my iPhone5 on Wed, now on Sunday it no longer works (black screen, can't see any indication it is recharging).  I had a iPhone 4 for over a year, so I know how to turn it on and it worked yesterday.  Could it have been deactivated?

    The question is in the title...what do I do now?

    Try resetting it: push both the power/lock button and the home button at the same time until the Apple logo appears

Maybe you are looking for