In which SNP_% table ODI stores the KM options?

Hi,
I was wondering if anyone knows where does ODI stores the KM options? Is it in some SNP_% tables or in some other tables in the repository?
I know that KM and its steps are stored in SNP_LINE_TRT table. But I am not able to locate the KM options.
Rgds,
Chandra

Check
snp_user_exit table
Thanks,
Sutirtha

Similar Messages

Table that stores the business role and user id mapping

Hi,
i want to know the table that stores the Business role and the business role and user id mapping in CRM system.
Thanks in Advance.
Regards,
Pricy

Hi Mary,
There is no direct table but there is a way to find it.
HRP1263 is the table where business roles are stored when maintained at org level. These are stored against the Position.
For getting user ID and position linkage refer table HRP1001.
In HRP1001 table use below criteria to get the User and Position.
OTYPE = CP
SCLAS = US
SOBID = User ID
ENDDA = 31.12.9999
Get the OBJID
Query the HRP1001 table again with following
OTYPE = CP
OBJID = OBJID from above Query
ENDDA = 31.12.9999
SCLAS = S
SOBID = Thats Position.
Pass the position to HRP1263 as below.
OTYPE = S
OBJID = POSITION
PROFILE - Thats business role assigned for the given position and user.
Hope this is helpful.
Regards,
Naresh

After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?

After upgrading to Yosemite, iphoto has a white symbol across it indicating it needs to be upgraded. When at the app store the install option is not available?

What version of iPhoto do you have?
iPhoto Upgrade under Mavericks see post by Old Toad

How can i remove my credit card from app store, the none option its not there and i don't Owen nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

How can i remove my credit card from app store, the none option its not there and i don't Owen nothing to apple, my last in app purchase was in clash of clans, please help!!! Because of that problem i cant update my apps! Plz help!!!!!

You've logged into your account and viewed your purchase history and there aren't any error messages shown (e.g. 'problem with a previous purchase'), and you haven't got any purchases due (e.g. pre-orders and/or subscriptions) : Why can’t I select None when I edit my Apple ID payment information ?

Tables that store the "Personalization" values in Demantra CWB

Hi All,
Can some tell me, which tables stores the basic "personalize information" on CWB Demantra.Like i am looking for tables that stores "MY worksheets" information in the home page of CWB.
Thanks,

as far as i know...we dont have any table to show the below requirement
"Like i am looking for tables that stores "MY worksheets" information in the home page of CWB."
you can only view the list of available worksheets in queries table

Table that stores the application logs messages for transaction CRMD_ORDER

Hi Guru's,
I would like to know which CRM table that is used to store application logs (consist of error / warning / information messages) in transaction CRMD_ORDER? I would like to retrieve the text messages of the application log.
Thanks.

Hi there,
The logs are on tables BALHDR (header) and BALDAT (detail).
In BALHDR you can fill OBJECT with 'CRM_DOCUMENT' and EXTNUMBER with the document GUID (you can obtain it in CRMD_ORDERADM_H table).
The BALDAT is a cluster table, so the information is a little 'encoded' there for direct consulting without abap code.
Alternatively, you can use FM APPL_LOG_READ_DB to read the messages that are contained in any CRM document.
Kind regards,

Data base table to store the contents of a Variant

I am using the FM RS_VARIANT_CONTENTS to extract the contents of a variant of a specific program. Is there any Data Base table which stores the contents of a variant.
Moderator message: please do not open multiple threads for the same or similar issue (I have replied to the original one).
Edited by: Thomas Zloch on Jan 28, 2011 3:46 PM

The table VARI stores all the variants of a program.
To get the contents of the variant you can use the FM RS_VARIANT_VALUES_TECH_DATA.
Hope this helps!
Regards, Mukta

Name of the Table that stores the Possible Agent ID's for a Task.

Hi,
Could you please tell us the table that would store the Agent ID's that are assigned to a particular task? For e.g we have assigned a few user names to Task TS00007986 ( Requisition release) through OOCU, we would like to know in which table we would find those usernames assigned to that task.
Thanks.

Hi,
I'm not on SAP at the moment.
But isn't it stored in the HR relation table (is it HRP1001?)
Anyways I'll check in a couple of hours if this is the case.
Also activate the SQL trace ST05 just before you go to agent assignment
Kind regards, Rob Dielemans
Edited by: Rob Dielemans on Sep 30, 2010 1:27 PM

Table to store the list of BSP Applications and View Names

Hi,
Please let me know the tables used to store the list of BSP Application and the corresponding View Names.
Thanks and Regards,
Pavithra

Table name is O2PAGDIR.
~Salil

Is there a system table that stores the "create table" scripts

Does a Oracle system table exist that contains the "create table" scripts for tables defined under a schema?
I know I can build this with SQL by querying the user_tab_columns, but I was wondering whether the entire DML
statement is already stored in some other system table. In the Quest Toad software you can simply go to the "Schema Brower", "Tables",
then select the "Script" tab and it shows you the "create table" statement for the particular table that you are
looking at. I'm wondering whether Toad behind the scenes is building this "create table" script via the user_tab_columns
table or using another system table.
Thank you in advance,
Wes

you can use the DBMS_METADATA.GET_DDL procedure to obtain the details regarding the ddl statement used to create the table.

ODI Master Rep tables that stores the work rep details

Hi all,
I want to know the details of all the repositories present in an ODI installation. I believe that the table in master repository will have the details of the work rep present under it. Please let me know the tables that is holding the work details.
Thanks,
Raja

Hi Raja,
can you please close the thread with Mark as correct or helpful.
Thanks

Which table/view stores the Driver values for each project

Hi,
I want to report on projects and drivers and the rating (Extreme, Moderate, low etc.) that have been assigned to each project. I cannot seem to local the correct table/view. I found the driver table and analysis tables but not one that has
a project and ratings.
What is the table / view?
Regards Andrew
Andrew Payze

Hi Andrew,
That would be the MSP_Project_Impact_values in the published schema.
Please note that querying this particular schema is not supported.
Hope this helps
Paul

Oracle tables to store the data for Run Depreciation in Fixed Assets

Hi All,
When we do Run Depreciation without closing the period, what backend tables store this information that the Depreciation is run without closing the period.
I have to apply a logic in one of my package, which would be applied only if preliminary depreciation (i.e. depreciation is run without closing the period) is not done.
Regards,
Shruti

Hi,
The table name is FA_DEPRN_PERIODS. This table cotains the infomation about the Depreciation periods.
Here you will find a column DEPRN_RUN which indicates whether depreciation is run for the period.
you can use the below query for finding out the period where depreciation is run but period is still open.
select * from FA_DEPRN_PERIODS x
where x.DEPRN_RUN = 'Y'
and x.PERIOD_CLOSE_DATE is null
I hope your question is answered.
Regards,
Rubayat

Table that stores the acurred PO line item freight costs

Hi there,
Can somebody please assist by telling me the table where a PO line item fright cost (accured) is stored. The frieght cost is determined/basd on line item Pricing condition FRB1.
Thanks

What are you trying to get. Accrued cost can be taken from the GL account directly, which may have PO reference.
EKBE may have reference to the history of PO which can give the lead.

How to specify the directory in which we want to store the uploaded files

Hello !!
I am using apache commonfile upload for uploading my files.I followed the user guide and tried to run a program,but my problem is I am not able to understand as to how to mention the directory in which the uploaded file will be saved..My code is given below :
package r;
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
import java.util.*;
import org.apache.commons.fileupload.*;
import org.apache.commons.fileupload.servlet.*;
import org.apache.commons.fileupload.disk.*;
import org.apache.commons.io.*;
import java.lang.Exception;
public class fileupload extends HttpServlet
     public void doGet(HttpServletRequest request,HttpServletResponse response)throws IOException,ServletException
               // Check that we have a file upload request
              boolean isMultipart = ServletFileUpload.isMultipartContent(request);
             System.out.println(isMultipart);
             if (ServletFileUpload.isMultipartContent(request))
             // Create a factory for disk-based file items
               FileItemFactory factory = new DiskFileItemFactory();
               // Create a new file upload handler
               ServletFileUpload upload = new ServletFileUpload(factory);
               // Parse the request
               try {
                         List items= upload.parseRequest(request);
                         Iterator iter = items.iterator();
                         while (iter.hasNext())
                               FileItem item = (FileItem) iter.next();
                             if (item.isFormField()) //NORMAL FORM FIELD
                             String name = item.getFieldName();
                              String value = item.getString();
                              System.out.println(value);
                              else
                             String fileName = item.getName();
                             System.out.println(fileName);
                                String contentType = item.getContentType();
                              File saveTo = new File("/info/upload_files/myFile.jpeg");
                         try
                                   item.write(saveTo);
                                   System.out.println("File written" );
                         catch(Exception e)
                                     System.out.println("File not written");
                               // InputStream fs= item.getInputStream();
                               fileName = FilenameUtils.getName(fileName);
                                System.out.println(fileName);
                    }//end of try
          catch (Exception e) { }
     public void doPost(HttpServletRequest request,HttpServletResponse response)throws ServletException,IOException
             doGet(request,response);
The problem is that the control doesn't reach the try statement and I get " File not written" on the console because it enters catch everytime..Please tell me how the path to the directory should be given...Rest of the code is working fine

No, the problem is that when an Exception is thrown, you ignore it completely and throw away all the information associated with it. That leaves you to guess at what the problem is. So instead of answering your guess at a good question, I'm going to suggest that in all of your catch blocks you put this code:e.printStackTrace();Then you can look at the output in the log file and see what the problem is. Start from there.

In which SNP_% table ODI stores the KM options?

Similar Messages

Maybe you are looking for