In which steps of Logic E. can I make a stereo audio recording track with a right and left microphone?

I want to make a stereo recording with a microphone for left and one for right. Can someone tell me the Logic steps to record 2 tracks (mono left and
mono right?) at once, to make a stereo track from both tracks? I use Logic Express 7.

I think it is easy if you have an audio interface that has two mic imputs. You direct each of them to two different mono audio tracks. Then, at the time if playing it, you just pan one channel to the left and the other to the right.
I think this is what you are asking for,
hope it helps

Similar Messages

I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

I just downloaded the new iOS 5.0 and did all of the backup prompted steps beforehand, but I can't figure out how to get all of my apps and music back on my iPhone. Where did they go and how can I put them back on my iPhone?

Hi, Abril_Perez17.
This may be related to a new feature embedded in iOS7 that shows all purchased music by default. Go to Settings > Music, then turn off Show All Music. See if the issue ceases once the feature has been disabled. This information is located on page 63 of the user guide below.
iPhone User Guide
Regards,
Jason H.

How do I share / unlink the right and left channel, so I can work with them individually ?

I use "Adobe Sound Booster CS5"
I have a stereo soundtrack, which I only want to remove noise in only one channel (right).
How do I share / unlink the right and left channel, so I can work with them individually ?

When Soundbooth was first developed, it had a few extra things than what were not available in Audition. However, Audition remained the more high end sound editing tool. Soundbooth was locked to a multiple channel editing approach. In Audition, single editing is easy - you simply click the L or R at the right end of the sound channel to lock it and then you can edit the other channel only.
Soundbooth has been discontinued and Audition now has taken its place from CS6 to the Creative Cloud.
The above is some background info. To your current situation, you can use a workaround like:
* Export your audio file to separate channels by File > Export > Channels to mono files.
You will get 2 files with _L and _R suffix.
You can then edit them separately. You can go from Mono to Stereo by the following step.
Or
* Choose - Edit > Insert > Channels into New Multitrack file.
That will separate the Left and Right Channels and add them to a new multitrack file.
You can then click the Edit link at the top right of the channel to edit it.
You can then save that file as a new audio file.
Dean

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems n

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]

My apple wireless mouse scrolls in the opposite direction. When I scroll up, down, right and left it always scrolls the opposite direction. Can anyone help?

My apple wireless mouse scrolls in the opposite direction. When I scroll up, down, right and left it always scrolls the opposite direction. Can anyone help?

Hi Malky H.,
Thanks for visiting Apple Support Communities.
If your mouse is not scrolling in the direction you are expecting, check this Mouse setting in System Preferences:
Choose Apple menu > System Preferences, then click Mouse.
Scroll direction: natural: Select this option to move the contents of a window in the same direction as your fingers.
You can find this information here:
OS X Yosemite: Use an Apple Magic Mouse
Note that these steps apply to previous versions of Mac OS X as well.
Best Regards,
Jeremy

How can I make photos on web page enlarge with mouse-over?

How can I make photos on web page enlarge with mouse-over?

There's a couple of recent topics which mention MagicZoom and JQZoom...
https://discussions.apple.com/message/17438064#17438064
https://discussions.apple.com/message/17440847#17440847
A very simple method is shown here...
https://discussions.apple.com/message/17440847#17440847

Can I make layers default to the top when I drag and drop into a new folder?

Can I make layers default to the top when I drag and drop into a new layer folder instead of the bottom? It annoys me that they always go to the bottom and I inevitably always need them at the top.
Thanks

Hi there
ok so PS CS6 if I grab a layer in Group A (yes layer sets sorry) and drop it into Group B, itll put it under anything thats already in Group B, which annoys me! Is there a way of telling PS to default anything dragged from one group to another to default the newly added layers to the top

I updated my iphone to ios 7.1.1 and after that my contact photo when i call or call others to me is a small cycle of that picture i choose ... How can i make a big picture when i call my contant and when others call me ?

I updated my iphone to ios 7.1.1 and after that my contact photo when i call or call others to me is a small cycle of that picture i choose ... How can i make a big picture when i call my contant and when others call me ?

It's not clear why Apple made this change; speculation (which is not really allowed in these forums) is that it was done to protect the privacy of the caller.

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

When i try to upload a .mts file from my Sony camera to Premiere Pro CC it refuses to play the audio! Ofcourse i could convert every single clip but it takes tons of time. How can i make Pr play audio track properly?

Does it not play at all or cannot you get the audio in the timeline?
Did you copy the entire card to the hdd and then imported the file via the Media Browser?
Did you source patch the audio tracks?

How can you make the iPod tell the diff between a movie and music video

Greetings!
How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
Thanks for the help!

Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show

How can I merge all of my iTunes libraries with my wife and kids so we can all share the music?

how can I merge all of my iTunes libraries with my wife and kids so we can all share the music?
There are 3 accounts that I want t o transfer all the music to
Joe

Welcome to the Apple Community.
You can't merge accounts.
You can however share or import content from another library/account using homesharing.

Hp envy can't right and left click at same time

my hp envy touchpad cant hp envy can't right and left click at same time. i dont know if its a driver. because of that i cant play games like GTA cause i need right click to aim and left click to shoot. is there a solution to this
This question was solved.
View Solution.

@gwatanaj ,
Hello and thank you for posting on the HP support forums. Here is a link that you may find useful.
HP Notebook PCs - Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
What you are trying to do may not work with your touchpad. Normally when gaming it is best to use a mouse. The hardware is built different and you would find it easier to work with.
If you need further help please post back. First check out this link.
Advice for asking the "Very Best Question"
As well please include your Full Model and Product Number.
I hope to hear back from you soon.
Thank you again and have a great day.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
D5GR
I work on behalf of HP

Can I shrink the iTunes webpage on my PC monitor so it does not cut off the right and left margins?

Can I shrink the iTunes webpage on my PC monitor slightly so it does not cut off the right and left margins?

Can you? Are you capable of resizing the window?
Only you can answer that question.
If you want to know if it is possible, yes, it is possible.

Why do I keep losing audio/recorded tracks and SFX in my projects? I have tried: Saving as archive file/searching package contents etc. to no avail. Can anyone help?

Why do I keep losing audio/recorded tracks and SFX in my projects? I have tried: Saving as archive file/searching package contents etc. to no avail. Can anyone help? It keeps telling me 'Audio file not found', and seems to be different tracks in the same project each time too.

iamthewaughrus wrote:
I also have this problem using Garageband in a school network situation when students open their project on one station, save it to their network drive, and later open it at a different station. 90% of the time there will be no issue, but sometimes audio files are lost. (Garageband '11, iMacs)
That sounds like it might be a failure of the students to perform a Save As and check Archive Project when they do. This asks GB to pull all the files it needs into the associated .band document rather than point to them externally (and then risk not having them be there).

Can we list all the users or groups with there rights on the universe\s

Can we list all the users or groups with there rights on the universe\s using query builder.
Can we do the same by using auditor reports.
PLZ help

Thanks ,
It can be acihived by using secuirty viewer.
Thanks again

In which steps of Logic E. can I make a stereo audio recording track with a right and left microphone?

Similar Messages

Maybe you are looking for