In which table may I find the settled values from the WO's settlement
Hello Expert,
Can anyone be so kind an let me know In which table may I find the value of settled costs from Work Order broken donwn into Settlement Receivers?
I have found the table COBRB where I'm able to see the settlement rules for the WO but where the values from settlement are stored?
Thank you in advance for valubale answers.
Regards:
Lukasz Kurlit
Hello Kolla,
I was too quick with my last answer, still I have the problem with this relation between COBRB and COEP, let me clarify it again.
In WO I have manually modified the settlement rule that way that I settled costs split into two Cost Centers.
Both lines regarding settlement rules are visible in table COBRB.
Then I have found in COEP table that there are stored exact values regarding settlement for both Cost Centers, one value for one Cost Center but without any key shows which one refers to which Cost Center (I recognized it after values which were settled in different time and after modification of settlement rule)
What I need now is to find the relationship between COBRB and COEP that way that I will be able to know clearly (for reporting purpose) which line from COEP refers to which Cost Center recorded in COBRB.
Link via OBJNR gives me only both lines in COEP without knowledge which one is from which Cost Center, there is no such field which will indicate which Cost center is hidden behind the value.
I will be very appreciated for any hints how to find it.
Regards:
Lukasz Kurlit
Similar Messages
-
In which table we can find frieght, excise value, basic value, customer no
hi,
sap gurus,
good afternoon to all,
i came with a different query now.
in reports where in which table we can find
frieght,
excise value,
basic value,
customer no,
sales rate/value,
entry tax details,
octroi,
charity
CST
VAT
Bill value before rounding off
rounding off
final bill value.
these are the fields which has to capture in one report
what to do ?
on this.
plz let me know some thing on this.
regards,
balaji.t
09990019711Dear balaji
All condition values will be stored in KONV. So Go to SE16, input KONV and execute. You will get all condition types from this table. Here, you cannot correlate these condition types to your sale order.
So that you have to do is that there is a field "Doc.condition" in the above report under which, some numeric values will flow. Copy those values and now go to SE16, input table VBAK and execute. Here, the same field, viz.Doc.condition will be there. Paste those values which you copied from KONV and execute.
You will now get the desired result.
thanks
G. Lakshmipathi -
How can I access the Attribute Values from the Search Region
Hi all,
I have a table which contains Company id, department id, and PositonId. For a particular Company and Department there may be multiple records.
I have to pupulate a table which contains the position and other details that comes under a particular Department and Position based on the selection in the Three comboBoxes.
Also I have to populate a select many Shuttle to add new postions and records under a particular Department.
I created a query panel *(Search Region)* for the serch and a table to display the data. That is working fine.
Now the issue is I am using a view criteria to populate the shuttle with two bind variables ie, DepartmentId and CompanyId.
If the serach will return a resuktant set in the table it will also pupulate the correct records, otherwise ie, if the if the serch result is empty the corresponding iterator and the attribute is setting as null.
SO I want to access the attribute values from the Search Region itsef to populate the shuttle.
I don't know how can I access the data from the Search Region.
Please Help.
Regards,
Ranjithyou could access the parameters entered in search region by the user as follows:
You can get handle to the value entered by the user using queryListener method in af:query.
You can intercept the values entered as described
public void onQueryList(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
List<Criterion> searchList = qdes.getConjunctionCriterion().getCriterionList();
for ( Criterion c : searchList) {
if (c instanceof AttributeCriterion ) {
AttributeCriterion a = (AttributeCriterion) c;
a.getValues();
for ( Object o : a.getValues()){
System.out.println(o.toString());
//call default Query Event
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
public void onQueryTable(QueryEvent queryEvent) {
// The generated QueryListener replaced by this method
//#{bindings.ImplicitViewCriteriaQuery.processQuery}
QueryDescriptor qdes = queryEvent.getDescriptor();
//get the name of the QueryCriteria
System.out.println("NAME "+qdes.getName());
invokeQueryEventMethodExpression("#{bindings.ImplicitViewCriteriaQuery.processQuery}",queryEvent);
private void invokeQueryEventMethodExpression(String expression, QueryEvent queryEvent){
FacesContext fctx = FacesContext.getCurrentInstance();
ELContext elctx = fctx.getELContext();
ExpressionFactory efactory = fctx.getApplication().getExpressionFactory();
MethodExpression me = efactory.createMethodExpression(elctx,expression, Object.class, new Class[]{QueryEvent.class});
me.invoke(elctx, new Object[]{queryEvent});
Thanks,
Navaneeth -
Need help Take out the null values from the ResultSet and Create a XML file
hi,
I wrote something which connects to Database and gets the ResultSet. From that ResultSet I am creating
a XML file. IN my program these are the main two classes Frame1 and ResultSetToXML. ResultSetToXML which
takes ResultSet & Boolean value in its constructor. I am passing the ResultSet and Boolean value
from Frame1 class. I am passing the boolean value to get the null values from the ResultSet and then add those
null values to XML File. When i run the program it works alright and adds the null and not null values to
the file. But when i pass the boolean value to take out the null values it would not take it out and adds
the null and not null values.
Please look at the code i am posing. I am showing step by step where its not adding the null values.
Any help is always appreciated.
Thanks in advance.
============================================================================
Frame1 Class
============
public class Frame1 extends JFrame{
private JPanel contentPane;
private XQuery xQuery1 = new XQuery();
private XYLayout xYLayout1 = new XYLayout();
public Document doc;
private JButton jButton2 = new JButton();
private Connection con;
private Statement stmt;
private ResultSetToXML rstx;
//Construct the frame
public Frame1() {
enableEvents(AWTEvent.WINDOW_EVENT_MASK);
try {
jbInit();
catch(Exception e) {
e.printStackTrace();
//Component initialization
private void jbInit() throws Exception {
//setIconImage(Toolkit.getDefaultToolkit().createImage(Frame1.class.getResource("[Your Icon]")));
contentPane = (JPanel) this.getContentPane();
xQuery1.setSql("");
xQuery1.setUrl("jdbc:odbc:SCANODBC");
xQuery1.setUserName("SYSDBA");
xQuery1.setPassword("masterkey");
xQuery1.setDriver("sun.jdbc.odbc.JdbcOdbcDriver");
contentPane.setLayout(xYLayout1);
this.setSize(new Dimension(400, 300));
this.setTitle("Frame Title");
xQuery1.setSql("Select * from Pinfo where pid=2 or pid=4");
jButton2.setText("Get XML from DB");
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch(java.lang.ClassNotFoundException ex) {
System.err.print("ClassNotFoundException: ");
System.err.println(ex.getMessage());
try {
con = DriverManager.getConnection("jdbc:odbc:SCANODBC","SYSDBA", "masterkey");
stmt = con.createStatement();
catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
jButton2.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(ActionEvent e) {
jButton2_actionPerformed(e);
contentPane.add(jButton2, new XYConstraints(126, 113, -1, -1));
//Overridden so we can exit when window is closed
protected void processWindowEvent(WindowEvent e) {
super.processWindowEvent(e);
if (e.getID() == WindowEvent.WINDOW_CLOSING) {
System.exit(0);
void jButton2_actionPerformed(ActionEvent e) {
try{
OutputStream out;
XMLOutputter outputter;
Element root;
org.jdom.Document doc;
root = new Element("PINFO");
String query = "SELECT * FROM PINFO WHERE PID=2 OR PID=4";
ResultSet rs = stmt.executeQuery(query);
/*===========This is where i am passing the ResultSet and boolean=======
===========value to either add the null or not null values in the file======*/
rstx = new ResultSetToXML(rs,true);
} //end of try
catch(SQLException ex) {
System.err.println("SQLException: " + ex.getMessage());
======================================================================================
ResultSetToXML class
====================
public class ResultSetToXML {
private OutputStream out;
private Element root;
private XMLOutputter outputter;
private Document doc;
// Constructor
public ResultSetToXML(ResultSet rs, boolean checkifnull){
try{
String tagname="";
String tagvalue="";
root = new Element("pinfo");
while (rs.next()){
Element users = new Element("Record");
for(int i=1;i<=rs.getMetaData().getColumnCount(); ++i){
tagname= rs.getMetaData().getColumnName(i);
tagvalue=rs.getString(i);
System.out.println(tagname);
System.out.println(tagvalue);
/*============if the boolean value is false it adds the null and not
null value to the file =====================*/
/*============else it checks if the value is null or the length is
less than 0 and does the else clause in the if(checkifnull)===*/
if(checkifnull){
if((tagvalue == null) || tagvalue.length() < 0 ){
users.addContent((new Element(tagname).setText(tagvalue)));
else{
users.addContent((new Element(tagname).setText(tagvalue)));
else{
users.addContent((new Element(tagname).setText(tagvalue)));
root.addContent(users);
out=new FileOutputStream("c:/XMLFile.xml");
doc = new Document(root);
outputter = new XMLOutputter();
outputter.output(doc,out);
catch(IOException ioe){
System.out.println(ioe);
catch(SQLException sqle){Can someone please help me with this problem
Thanks. -
Retrieving the score value from the captivate into flash
Hi,
We have used Captive 2 to built course & publishing it as
a non e-learning output
and loading the published swf file in custom built flash
movie (wrapper).
We have accessed some of the captivate variables to control
the captivate swf.
Does anyone know how to retrieve the score value from the
captivate into flash ?
Thanks
Regards
ChetanHello,
Use the Object Browser in .NET and search on "Summaryinfo" and you'll find the API to use.
Thank you
Don -
How can i get the all values from the Property file to Hashtable?
how can i get the all values from the Property file to Hashtable?
ok,consider my property file name is pro.PROPERTIES
and it contain
8326=sun developer
4306=sun java developer
3943=java developer
how can i get the all keys & values from the pro.PROPERTIES to hashtable
plz help guys..............The Properties class is already a subclass of Hashtable. So if you have a Properties object, you already have a Hashtable. So all you need to do is the first part of that:Properties props = new Properties();
InputStream is = new FileInputStream("tivoli.properties");
props.load(is); -
Accessing the email value from the iPhone AddressBook
Need some help getting the email value from the AddressBook. This is what I have so far ...
Used to open up the picker and limit to email only
-(void) browseButtonPressed:(id)sender
ABPeoplePickerNavigationController* controller = [[ABPeoplePickerNavigationController alloc] init];
controller.peoplePickerDelegate = self;
NSNumber* emailProp = [NSNumber numberWithInt:kABPersonEmailProperty];
controller.displayedProperties = [NSArray arrayWithObject:emailProp];
controller.navigationBar.tintColor = [UIColor blackColor];
[self presentModalViewController:controller animated:YES];
The delegate method in the same class
- (BOOL)peoplePickerNavigationController:(ABPeoplePickerNavigationController *)peoplePicker
shouldContinueAfterSelectingPerson:(ABRecordRef)person
property:(ABPropertyID)property
identifier:(ABMultiValueIdentifier)identifier
NSString *email = (NSString *)ABRecordCopyValue(person, kABPersonEmailProperty);
NSLog(@"selected person: %@", email);
[[peoplePicker parentViewController] dismissModalViewControllerAnimated:YES];
return NO;
The NSLog prints the following ...
selected person: <NSCFType: 0x1d81c0>
Any idea why it's not printing a string rather I am getting NSCFType ?Great Post. One of the few times that I was able to come to a conclusion about the code I need. Here is an example of the delegate method in reference to getting the email address.
- (BOOL)peoplePickerNavigationController:(ABPeoplePickerNavigationController *)peoplePicker shouldContinueAfterSelectingPerson:(ABRecordRef)person property:(ABPropertyID)property identifier:(ABMultiValueIdentifier)identifier
ABMultiValueRef emails = ABRecordCopyValue(person, property);
CFStringRef email = ABMultiValueCopyValueAtIndex(emails, identifier);
NSLog( (NSString *) email);
self.receiverEmail.text = (NSString *) email;
[self.tabBarController dismissModalViewControllerAnimated:YES];
return NO;
} -
Book out the Consumption value from the planned consumption
Hello everybody,
i am going to develope a consumption report, is there a BABI or Something Like This that available to book out the Consumption value from the planned consumption? (to unplanned consumption)
Thanks
Best regards.
DANI.I am currently working on a SQVI report just a prototype prior to having the programmer create an ABAP report. The trouble I am having is truly understanding how SAP tabulates the consumption. We are putting significant effort into this report and will let you know the results.
-
"An error occurred while attempting to retrieve the KPI value from the list"
Hi all.
when I used KPI, this error occured:
An error occurred while attempting to retrieve the KPI value from the list
what happened?
any suggestion.
thanks.Hello,
Unfortunatly, I don't have the option to re-create my SP list. I have created my KPI list in the same site as the targeted list. I have made all items available in the list view, I've tried several different list views, I still get the
An error occurred while attempting to retrieve the KPI value from the list.
message.
I am at a loss here, I've search the internet high a low and haven't found any helpful info.
In MOSS 2007 I've created a list with about 24 columns. I need a KPI based on one of the columns. I've tried to creat a view with that one column, I've tried to creat a view with all columns
and make it the defualt column... I don't know what else to try here.
Any help would be very appriciated!
Cheers,
~Bryan -
How to get the query values from the url in a servlet and pass them to jsp
ok..this is the situation...
all applications are routed through a login page...
so if we have a url like www.abc.com/appA/login?param1=A¶m2=B , the query string must be passed onto a servlet(which is invoked before the login page is displayed)..the servlet must process the query string and then should pass all those values(as hidden values) to the login jsp..then user enters username and pswd, then there should be another servlet which takes all the hidden values of jsp and also username and pswd, authenticates the user and sends the control back to that particular application along with the hidden values...
so i need help on how to parse the query string from the original url in the servlet, pass it out to jsp, and then pass it back to the servlet and back to the original application...damnn...any help would be greatly appreciated...thanksok..this is the situation...Sounds like you have a bad design on your hands.
You're going to send passwords in a GET request as clear text? Nice security there.
Why not start with basic security and work your way up?
% -
Need to get the selected values from the selectManyShuttle
Hi,
I am using ADF11g newer version.
I have a selectManyShuttle and a command button. Need to insert all the selected values on the right hand side of the selectManyShuttle into a database table.
I created the selectManyShuttle with the values. Need help in getting the values on the right hand side.
<af:selectManyShuttle value="#{bindings.UserMgmtVO1.inputValue}"
id="sms2">
<f:selectItems value="#{bindings.UserMgmtVO1.items}"
id="si6"/>
</af:selectManyShuttle>
Any sample code or link is really appreicated.
ThanksThanks for the reply.
I am using a View Object and I dropped it as SelectManyShuttle
<af:selectManyShuttle value="#{bindings.UserMgmtVO1.inputValue}"
id="sms2"
valueChangeListener="#{POBacking.getSelectedValues}"
valuePassThru="true"
autoSubmit="true">
<f:selectItems value="#{bindings.UserMgmtVO1.items}"
id="si6"/>
</af:selectManyShuttle>
public void getSelectedValues(ValueChangeEvent valueChangeEvent) {
System.out.println("Testing Shuttle");
ArrayList list = new ArrayList(Arrays.asList(valueChangeEvent.getNewValue()));
String val = "";
String sqlStmt = "";
try {
if (list != null) {
for (int i = 0; i < list.size(); i++) {
int l = list.size() - 1;
val = list.get(l).toString(); //returns , delimited string
System.out.println(" value:" + val);
if (val != null) {
val = val.replaceAll("[\\[\\]]", ""); //remove []
StringTokenizer st = new StringTokenizer(val, ",");
int nto = st.countTokens();
for (int j = 0; j < nto; j++) {
String users = st.nextToken().trim();
System.out.println("Users:" + users);
//sqlStmt = " update xxpp_project_clip set clip_status='true', clip_seq = "+j * 10+
// " where project_id = "+rHdr.getAttribute("ProjectId") +
// " and clip_name ='"+ clip_Name +"'";
//System.out.println("sqlStmt:" + sqlStmt);
//stmt.executeUpdate(sqlStmt);
//am.getDBTransaction().commit();
//if (stmt != null)
// stmt.close();
// am.getDBTransaction().commit();
} catch (Exception ex) {
ex.printStackTrace();
I don't see the values in the list.
I gets printed as
value:[Ljava.lang.Integer;@1b10691
Users:Ljava.lang.Integer;@1b10691
how to get the individual values in the list?
Thanks
Saru -
How to get the selected values from the shuttle
Hi
Please tell me how to get the selected option values from the shuttle leading list.
Thanksyou can also obtain the option values present in the leading and trailing lists using the
following methods:
public String[] getLeadingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)
public String[] getTrailingListOptionValues(OAPageContext pageContext, OAWebBean
webBean)For example, the following code sample returns an array of values in the trailing list, ordered according to the
order in which they appear in the list:
String[] trailingItems =
shuttle.getTrailingListOptionValues(pageContext, shuttle);Thanks
--Anil -
How to read the Key value from the Message using the text value.. Urgent
I need to read the Key valuefrom the message pool using the text value for the Key.. Is it possible.. Please help me with sample code..
Thanks and Regards
AvijitAvijit,
I got your requirement. I really dont know the scenario your working on but its possible to do it. There is no direct way to do so, but complexity is in getting to know the Keys dynamically from interface.
Here you go..
try
Class msgClass = IMessageTestWDApps.class;
//Replace IMessageTestWDApps with IMessage<Your WD Component name>
Field keys[] = msgClass.getFields();
IWDTextAccessor textAccessor = wdComponentAPI.getTextAccessor();
if(keys != null)
String key = "";
for(int index=0;index<keys.length;index++)
key = keys[index].getName();
wdComponentAPI.getMessageManager().reportSuccess("Key= "+key);
if(textAccessor.getText(key).equals("My message text"))
//your logic.
catch(Exception cnfe)
wdComponentAPI.getMessageManager().reportException("Exe "+cnfe.getMessage(),false);
Regards
Abhilash
Message was edited by:
Abhilash Gampa -
In which table can I find security audit settings from SM19?
Hello everybody,
I'd like to give certain users access to the security audit settings that we defined in SM19. They are supposed to be able to read them but not change anything. I've experimented a bit with SM19 authorizations and figured out that a read-only access to SM19 is possible if I deactivate S_C_FUNCT. The problem is that the aforementioned users already have complete access to S_C_FUNCT and are supposed to keep it. The also have AUDD and AUDA in S_ADMI_FCD. Ergo: If I just add the S_TCODE for SM19 they'd be able to change security audit settings and I don't want to allow that.
Does anybody know the table where SM19 saves its settings? Maybe I could grant read-only access to that table via SM30 or SE16...
Looking forward to your answers!
Kind regards
MarioHi Mario,
Restrict access for table RSAUPROF , It should do!!!
Regards -
To get the input values from the dynamic tables and save in the SAPdatabase
HI EXPERTS,
I AM NEW TO WEB DYNPRO ABAP. MY QUERY IS HOW TO GET THE VALUES THE USER ENTERS IN THE DYNAMIC TABLE AND SAVE THE SAME IN THE SAP DATABASE. I HAVE CREATED THE TABLES BUTTON EVERYTHING BUT I DONT KNOW THE CODE HOW TO DO. PLEASE HELP ME OUT.>
vadiv_maha wrote:
> HI EXPERTS,
>
> I AM NEW TO WEB DYNPRO ABAP. MY QUERY IS HOW TO GET THE VALUES THE USER ENTERS IN THE DYNAMIC TABLE AND SAVE THE SAME IN THE SAP DATABASE. I HAVE CREATED THE TABLES BUTTON EVERYTHING BUT I DONT KNOW THE CODE HOW TO DO. PLEASE HELP ME OUT.
hi,
1 there is one property OnAction of the button...
2 So, in this event handler,you have to read the context node to which ur table is binded
3 use the code wizard
control+f7
, and use the method
get_static_attribute_table
4 now u have got the vaues in internal table,so now as pointed in the previous reply, you can use the
Update
or
Modify
statement...
regards,
Amit
Maybe you are looking for
-
Data Source created by Infoset based in two joined tables
Hi Forum, I want to do a segmentation in the Segment Builder based in a attribute list. The tablas i join are: BUT000 and ADRC. Everything is ok when the infoset is created and generated. Well, the next step i do is create the DATA SOURCE. When i edi
-
When I try to activate iCloud on my new iPad it keeps telling me to check my email in order to verify my account. I never get an email though! What do I do from there?
-
Why does Lightroom 4.4 fail to read photos on import?
I insert an SDHC card into a card reader, LR starts, reads the photos and generates a preview so I can select which photos to import. I click on import and LR shows a progress bar that proceeds too quickly. When the progress bar completes LR informs
-
I cannot add shortcuts to my desktop using your suggested way!
When I drag the icon to the desktop, it looks fine, but when I release the mouse button. there is no shortcut there
-
In the past I was able to shuffle just a playlist and nothing else, and now it is gone. My question is "Is it possible to shuffle a playlist but not the rest of my music." Or is this one of the many apps that has hit the "All Or Nothing Floor"