In which transction  Status Profile in Engineering Change Note

Hi,
In which Transaction code the Status Profile for Engineering Chage Note can be maintained.
Regards
Guhapriyan

Hi Guhapriyan,
- Transaction BS02
or
- Via Customizing path: Implementation Guide for R/3 Customizing (IMG) --> Logistics - General --> Engineering Change Management --> Change Type --> Define status profile
Regards,
Rob.

Similar Messages

  • Table name which contains status profile of a given process order

    Hi All,
    I created one process order and assigned a status profile for it.
    I need to know which table will contain both these values.
    Ex: If i give process order as an input, then it gives status profile as an output.

    Hi,
    The Table for Status Profile is JSTO.
    But there is no direct link bitween AFKO/AFPO and JSTO.
    Take the help of an ABAPer for this..
    Regards,
    Siva

  • Status Profile - Restrict any changes made in sales document

    Hi SD Guru's
    I have a situation here. I have maintained status profile with one of the status as "REJ - Reject Sales Order". Now when i set that status "REJ" and save the order, and open it by transaction VA02, i can make any changes in the order document such as adding new line item. I want to restrict any changes for this order now. How can i tackle this situation. Can you please help me with the same, its urgent.
    Regards
    Ravi

    Dear Ravi
    This can be controlled in two ways.
    1)  Through User Exit : MV45AFZZ by not allowing the specific users to make changes
    2)   With the help of your Basis Team, authorization of VA02 should not be allowed for the said users.
    Thanks
    G. Lakshmipathi

  • Status Profile - Sales Order Change

    Hi,
    I have a issue regarding Status Profile in Sales Order.
    I have a sales order with two status - 
    Awaiting Approval ( Initial at the time of creation of Sales Order )
    Approved ( Approval by HOD after creation )
    No changes has to be done in Sales Order once approved, if any changes to be done then, needs resetting of the status to initial.
    How to control the same.
    I have checked the transactional control in user status but change sales order control is not there.
    Can be controlled through user exit then how can it be be done.... User Exit name and brief logic of possible.
    Regards
    SD Consultant.

    Hi
    You can use MV45AFZZ include to find appropriate User exit for your requirement with the help of your ABAPer.
    USEREXIT_SAVE_DOCUMENT would be suitable to you.
    User status are maintained at JEST table, so you can write code to activate status 1 and deactivate status 2 if sales order changed.

  • User status profile settings on WBS not working

    Hello,
    We have a User status profile on WBS element which has various statuses in it allowing different business transactions when that particular user status is set.
    There is one user status NPC in that status profile which should disallow assignment or confirmation on maintenance work order. Now the status previous to NPC status allows assignment or confirmation of orders. So after a order is assigned to the WBS and the WBS user status is changed to NPC when we try to confirm order on this WBS in NPC status sytem allows order confirmation.
    Why is system allowing this inspite of the status profile config says confirmation is disallowed in NPC status. I have checked the object types in the status profile config and maintenance order is also included in that but still its not working. Please help in solving this issue, its critical.

    The business transactions disallowed under NPC status are as below,
    Acct. Assignment order/Project
    Actual activity Allocation
    Assignment Order/WBS
    Confirm Order
    Goods Movement
    Material Purchase Order
    Material Purchase Requisition
    Post Goods Issue
    But orders can be assigned in the status before NPC, but once NPC is set system does not allow assignment of new orders which is correct. But system allows confirmation of already assigned orders. Please help we do not want any order confimation after NPC is set.

  • FM for the engineering change number to change status message to release

    Hi,
    I have a requirement to change the status message of engineering change number(transaction CC31 or CC32 ) automatically through a program. I have a thought of doing BDC but still i want to know any standard FM or class is available. Please help me if you have any suggestions.
    Thanks in advance for your help.
    Regards
    Syed Samdani

    Siva,
    Did you check in Tcode OMSR.
    Assign Fields to Field Selection Group - (OMSR)
    Here you can define whether a field is hidden or displayed, or whether an entry is mandatory or optional in material master maintenance by assigning the field to a field selection group in OMSR.
    Hope this Helps.
    Vinodh Balakrishnan

  • Changing the Status profile in QM

    Hi,
    The status profile (QM_L_001 - Inspection lot profile1) in the Quality Inspection Lot is been manually entered and saved.
    This has set the User Status as IMAT: Material is not correct.
    Due to this, unable to do any of the further processing.
    In QA02, the Status Profile cannot be changed/deleted.
    So how to remove the Status Profile from the Quality Inspection Lot?
    Request your help.
    Regards,
    Sankar.N

    Hi
    An other workaround, you can go to the transaction BS02 and change the status profile to allow the status can execute the following actions temporarily.
    Leon.
    Regards.

  • How to change status in status profile at header level in background

    Hi,
    I have customized the standard sales order screen with status profile at header level.
    In that, I have set the check boxes as created, delivered, approved and rejected.
    The requirement is, whenever the order is created through VA01, need to check the order as 'Created' one in the status profile.
    It is not possible for the user to mark this one manaully. I think, this can be done via only exits.
    Please confirm this and how this can be proceed.
    Thanks,
    Thiyagu

    For maintaining header conditions, Choose  Header--> Conditions  from menu bar.
    For maintaining Delivery address, first select your Item, then click on "Truck" icon. Here you can maintain your delivery address.
    Similarly, Header Texts and Item Texts will be maintained in Header> Texts,  Item> Texts from the Menu Bar.
    Regards,
    Umakanth

  • Status profile reverse

    HI,
    Good morning all.....
    I have a Query that can we revert the status profile once we changed the status "completed "and saved".
    If it is possible to change the status of saved service order how can we do this???
    EX: BY mistakenly i changed the status completed and saved it. Now how can i revert it???
    Regards,
    bajee

    Hi Shoki,
               As per my Knowledge the Status of an Object once Set cannot be Reversed by anothe Status Object which was set Earlier and not Lying in the No Range of the Current Status Object,
    If you have Set completed and You want to Set Open again then it shall be only permissible if your Object Open's No lies in the No Range of Completed thus the System shall permit you to Set the Status open Again.
    Hope it answered your Query...
    Thanks and Regards,
    RK.

  • Table for Status profile

    Hi,
    Is there any table which links sales order number and status profile???
    or
    eg:::
    Already sales order has been created with status profile ZSD003.
    Now a new status profile is been created ZSDITM.
    How to change the statusprofile for the already existing sale order having profile ZSD003 with the new status profile ZSDITM
    being ZSD003 in grade out state.
    Regards,
    Pradeep.

    Hello,
    I don't think the status profile can be changed for already created order, because when you are creating the order itself, the status gets updated.
    You need to assign the new status profile to the order type. It will be applicable to the newly created orders.
    Prase

  • Can anyone tell me how the Status Profile works in relation to BP's...

    Can anyone tell me how the Status Profile works in relation to BP's...
    For example, how can I view a particular status that a BP has, and can a BP have more than one status against a status profile. Also what date/time details are set when a status is changed?.
    Can anyone help with this?.
    Jas

    Arap,
    Many thanks for the info. As with all these posts, you do your best to try and find out yourself, fail, then raise a question on a site like this. As soon as you do the answer(s) become clear.
    I've found transactions BS02 which shows Status Profiles, and associated status.
    The Order/transaction holds the status set and can be extracted using the FM/Program CRM_ORDER_READ and using the ET_STATUS table.
    That's what I was mainly after.
    Many thanks for your help.
    Jas
    Edited by: Jason Stratham on Apr 1, 2009 4:59 PM

  • Status Profile in Object Management (CC02)

    Hi,
    I have defined a status profile in customizing for ECM change objects. Now I have to select the profile manually in menu (Set Stauts Profile).
    Is it possible to attach the status profile automatically when Change Master is created?
    The manual selection isn't user-friendly.
    Thx, and best regards
    Martin

    Hi Martin
    There is an option for mainayaining the profile for change master record in spro.
    You can assign the status profile you had defined to the change master record profile. The it will be automatically populated for the end user.
    Regards
    Prasad K

  • How to assign the status profile to that particular user..?*

    Hello Everyone..
    I have created a status profile for the particulat sales order type so that a particular user can confirm the sales order and the pass it,so that further changes can be avoided.The profile has been assigned to Item category also.
    Now My problem is ,How to assign the status profile to that particular user..?
    so that only the user is allowed to change the order.
    Thanks

    Hi,
    Maintain authorization key (authorization code)  in status profile.
    We do not assign directly to user. We assign to role E.g sales manager / sales employee etc...
    We assign T.codes to role and assign role to user.
    Goto Role T.code PFCG. Enter role and click on change button.Goto Authorizations tab.
    Click on authorization data .
    Expand the  Cross-application Authorization Objects tree. Expand Status Management: Set/Delete User Status using Transaction.
    Click on Authorization key button, assign Authorization key.
    Click on status profile. assign status profile.
    Regards,
    Chandra

  • Bapi for Project User Status Profile

    Hi,
    Is there any bapi that contains the field "Status Profile (STSMA) of the Project? I only can find the WBS status...
    Thanks in advance.
    LM

    Hi,
    Thanks for your reply.
    But this function is to get the status... The problem is when creating a project by BAPI, the "user status profile" field (STSMA) is not available to fill. In this case, it happens if we have 2 schemes for projects, the bapi only puts the first that appears and I want the 2nd one to be fullfilled.
    How can we create a projet by bapi and have this field?
    Thanks in advance,
    LM

  • To change user status profile on sales order at run time.

    Hi Experts,
    We have defined status profile for Sales returns ( Doc type RE) which blocks the  return order on creation. There are two statuses here which are to remove the delivery block and to remove the billing block by authorised users.
    The requirement is now to have a three level block ( three statuses ) on the same document. We can create a new status profile and assign it to a new return sales order tpye  but we want to avoid creating new document types. Since this document type is used across various companies in the group we can not assign a new profile on the existing RE document as well.
    My question to all experts is
    Is it possible to dynamically change the status profile assigned to the document type based on characterstics like sales org or company code etc? If any body has done this please let me know the user exit , function module, BADI etc where the necessary coding has been done.
    Helpful answers will be rewarded with points.
    I look forward to your co operation.
    Regards,
    Kartik Shah

    Hi Liam,
    In the Program MV45AFZZ in the FORM userexit_save_document
    you use the following fn module to change the user status
    'STATUS_CHANGE_EXTERN'
    Example
    IF t180-trtyp = 'H'.  "Only creation time
      READ TABLE xvbap WITH KEY matnr = c_matnr.
      IF sy-subrc = 0.  "If above material exist then change status
        LOOP AT xvbap WHERE cuobj NE space
                       AND  matnr =  c_matnr.
          l_objnr = xvbap-objnr.
          CALL FUNCTION 'STATUS_CHANGE_EXTERN'
            EXPORTING
              objnr               = l_objnr
              user_status         = 'E0013'  "Send ej IDOC
              set_chgkz           = 'X'
            EXCEPTIONS
              object_not_found    = 1
              status_inconsistent = 2
              status_not_allowed  = 3
              OTHERS              = 4.
        ENDLOOP.
      ENDIF.
      sy-subrc = 0.  "Restore the previous condition
    ENDIF.
    Reward if helpful *********

Maybe you are looking for