In wich screen do we enter manufacturer name to populate table icx_cat_attribute_values_tlp
Hi
trying to understand in iProcurement 12.2.4
where to setup (responsability / screen) the default manufacturer of an item (column manufacturer in table icx_cat_attribute_values_tlp)
if an item have many manufacturer
see attach.
manufacturer have the same value in those 2 table icx_cat_attribute_values_tlp po_attribute_values_tlp
how is it updated ?
Similar Messages
-
I cannot type a web page on my iphone5 on the search or enter website name window of safari. as I type w the system brings me back to the phone main screen. This has happened since I updated to the new iOS 8
You haven't mentioned any steps you might have tried to correct this so I'll suggest you try the first troubleshooting step. Reset your iPhone. Press and hold the Home and Sleep/Wake buttons simultaneously until the Apple logo appears. Then release the buttons and let the device restart. No data will be lost doing this. It's like rebooting a computer.
-
VFX3 ERROR:Enter a Name and City for one-time account postings (F5 266)
Dear Colleagues.
Finance are teying to release a billing doc to Finance on VFX3 and getting the error below.Is it something not maintained correctly somewhere (Customer Master,etc)?
All help greatly appreciated,
PAPJ1
Error Log
0010056707 000000 Document 0010056707 saved (no accounting document generated)
0010056707 000000 Enter a name and city for one-time account postings
Technical data
Tech. data details
Client
Group Number
Sales Document Number 0010056707
Item Number of the SD Document 000000
Schedule Line Number 0266
Counter in Control Tables 00
Message Identification F5
System Message Number 266
Output Type E
Message Variable 01
Message Variable 02
Message Variable 03
Message Variable 04
Group TypeHi.
The system logic is the following:
In the master record of your one-time account, there is a field called
'Reference account group'. The field status settings of the account
group entered here are relevant for the one time vendor screen.
Please note that even if the fields are changed from mandatory to
optional if the NAME and CITY of the One Time Vendor is not filled, the
system will still prompt the Error Message F5266.
If you do not enter the name and city you will receive error F5266.
The system logic here is to make sure that the name and the city being
keyed-in properly for the Executive Information System reportings.
Please note that it is hard-coded in the system.
Check the following notes
604312
587806
548834
513748
512360
Also if you are using any bapi to post the document, you can resolve the issue pass-in 'Name', City and Region field values in BAPI while creating the billing document.
I hope I could be of assistance.
Kind Regards,
Fernando Evangelista -
How do you change the name of a reminder in the reminder list. I right click and then choose "get information" I can change the colour of the reminder but when I type in the name that I want and then press enter the name stays as "untitled"
Jerry,
Thanks for replying again. I've got a little bit further thanks to you. I tried the US keyboard layout as you seemed pretty definte that it should work. This time I applied the setting and also started the language toolbar and selected it from there.
Hey presto, I've got the @ where it should be. Excellent.
However the single quote ' works in a weird way. When I press it, it doesn't show up on the screen. But when I press another key, I get the single quote plus the next key I press. When I press the single quote twice, I get 2 of them. This is also the same with the SHIFT ' key. i.e. for the double quotes.
Very strange. I'll look at other keyboards and see where that gets me.
Thanks, Maz -
How do I enter owners name on a Power Shot S5 IS camera?
Hi
I have recently purchased a Power Shot S5 IS camera. I would like to know how I go about entering my name into the camera so that it EXIF information lists my name as the "Owner Name". At present that information is blank.
Any help that can be provided will be much appreciated. Thank you.
Cheers
Don .
Solved!
Go to Solution.Connect your camera via USB, power it up, and launch "Camera Window"
In the upper-right corner there's an icon which resembles a gear (just left of the "?" icon in the extreme upper right corner). Click it. This opens the preferences window.
There are three icons across the top of the preferences window. The third icon is labeled "Camera". Click the camer icon.
There are two tabs on this screen. They are labeled "Information" and "Set". Click the tab labled "Set".
The top box on this page is for the "Owner's Name". There is an "Edit" button to the right. Clicking the "Edit" button makes the field editable.
Type in your name.
Press the "Set" button (previous this button said "Edit") to save your changes.
There is also a box for "Author" and "Copyright Info" -- you can set messages in these boxes as well as they'll become part of the image EXIF data.
Press the "Ok" button (bottom right corner) to save and dismiss the window.
Back on the main window for the "CameraWindow" utility a banner across the top will list the camera model, firmware version, and owners name. You should see your name listed in there.
Tim Campbell
5D II, 5D III, 60Da -
Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.
Why have 5 accounts if you need to access all of them.. just have one account?
Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers. -
When i type in my correct password on the login screen and press enter it just goes to a blue screen for a few seconds then goes back to the same login screen again, please i need help?
You can take some of the steps here, #4, #5 or even trying a #18
Step by Step to fix your Mac
but I suspect your going to first have to create a data recovery drive
Create a data recovery, undelete boot drive
to get your data off the machine,
then do a #20 to eliminate the bad sectors as that's why your getting the "pinwheel" it's getting a delay reading from the drive, right when your trying to log in too, what a bad spot for it to happen.
Step by Step to fix your Mac -
Cant fix - "select a certificate or enter a name and password for network"
iMac 27 - inch, Mid 2010
Software OS X 10.8.2 (12C60)
I cant seem to fix this message when going online, nore have I managed to find any help with it.
everytime my imac27 2010 sleeps it goes offline then this message appears...
"select a certificate or enter a name and password for network (whatever network im trying to connect to)"
it continues with...
"no certificate selected"
"account name"
"password"
as a result I have to play around with "join other network" every time I want to join my own network.
it was so anoying that I decided to reinstall everything from scrach, so I backed everything to time machine. but I couldnt restore as im on snow leapard and dont have an original disc with me. I moved countries so the apple store isnt round the corner any more :/ (disc would need to be shipped in)
whats interesting in my mac did not have this wifi conection problem when I took it to another location. only from home. But every other devise does not have this problem even at home...
any help really appreciatedHi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK. -
Enter a name and city for one-time account posting is the message i get
Enter a name and city for one-time account posting is the message i get ,when i am trying to post a onetime vendor .I have entered name ,country and language when the pop comes.But still throws me this message ,pls help.
Hi,
I didnt understand what u mean by "when i am trying to post a onetime vendor".
Pl. specify whether you are:
-Creating a OTV
-Creating a PO for a OTV
or
doing any other transaction
Regards,
Prithviraj -
Keeps asking for Select a certificate or enter a name and password for network
everytime i start my mac it asks for "Select a certificate or enter a name and password for network" and when i'll close it and reopen it, it still asks.
can somebody help with what am i suppose to do?If you are currently showing WiFi status in the menu bar, you would see this icon:
If you see that near the top right corner, click it and choose "Join other network" from the drop down list.
If you do not see that icon, then go to System Preferences (under the Apple logo in the menu bar), ciick "Network", then choose "WiFi" and choose something (probably "Assist me" at the bottom) there. -
Yosemite crashes on gray screen after I enter my password
I’m having serious problems with my MacBook Pro (15-inch, Early 2011) since I upgraded to Yosemite. However I am not entirely sure that it is because of Yosemite. Here is a description of what happens:
I turn on my Mac
The Apple logo briefly appears and then the two user account avatars are shown (me and Guest)
I click on my user account and it takes me to a new screen where I enter my password
I enter my password and there is now a progress bar (which is as slow as mass) underneath my user avatar
Once the progress bar is finished loading I’m taken to a blank gray screen
Nothing happens only I look at this gray screen for ages and eventually my Mac just shuts itself down and restarts
I cannot boot in Safe Mode
I cannot boot in Recovery Mode
I did manage to reset the PRAM but I was still getting the same behaviour that I described above
I also recently had the mother board changed by some Apple “Genius” as I was having problems with the computer shutting itself down while using it, screen freezing and weird graphics behaviour but this seems to be fixed now. I also ran an Apple Hardware Test and it returned no problems.
My Mac starts up every now and then (I’m actually writing this post on my Mac now) but the majority of the time I have the same problem time and time again. Does anybody have similar problems.
Can somebody please help me before I totally go off Apple products.
Thanks :-)I looked in my system.log and I found the following info that may give a clue as to why this is happening to my Mac:
Nov 6 15:07:09 localhost kernel[0]: Failed to load kext com.apple.kec.Libm (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.SMCMotionSensor (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleThunderboltEDMSink (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleHV (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleHWAccess (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleSMCLMU (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleHDAController (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleSMCPDRC (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleThunderboltIP (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.iokit.IOBluetoothUSBDFU (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.iokit.IOFireWireIP (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleIntelHD3000Graphics (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleMikeyDriver (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.AMDRadeonX3000 (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.iokit.IOUserEthernet (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleUpstreamUserClient (error 0xdc008012).
Nov 6 15:07:18 My-MacBook-Pro kernel[0]: Failed to load kext com.apple.driver.AppleOSXWatchdog (error 0xdc008012). -
How can I uninstal my mobileme account and install my icloud address? Mobile me doesn't recognise my Apple ID....won't allow me to open icloud on my MacBook. keep getting a message saying I need to enter another name or pin......nothing works........I've probably blocked it as server keeps saying try later.......
The minimum requirement for iCloud is Lion 10.7.2 (Mountain Lion preferred): the iCloud Preference Pane does not appear on earlier systems - the MobileMe pane appears on Lion and earlier but is non non-functional - you cannot now open or access a MobileMe account.
To make use of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
The requirements for Lion are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
To purchase it you will have to ring Apple at the number given at the bottom left of this page.
The requirements for Mountain Lion are listed here:
http://www.apple.com/osx/specs/
It is available from the Mac App Store (in Applications). (If you are currently pre-Snow Leopard you will have to upgrade to that to access the Mac App Store: it's available in the online Apple Store.)
You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table -
Enter your name and password for the server when trying to connect PC and Mac?
I'm trying to connect my iMac and my WIndows tablet (got it for free) together through my home network. I open iPhoto, then "Import to Library" ; the connection fails and when I click on "Connect as" up pops this box asking me to "enter your name and password for the server -computer name here-". HELP!! Where do I find the password? I've tried everything possible and no go.
I am running Windows 8 and Lion.Hi Tom! Welcome to the Apple discussions. You have posted in the forum dedicated to the application Appleworks. Your question is better to post in the forum for MacOs 10.6. In that forum you have several sub-forums to choose from.
-
When completing the software updates I can't remember always having to enter administrator name and password. Maybe it's just been automatic on my part but now I rethink the process when I am asked to enter this info since the Mac Defender malware became an issue with Mac. Just wanted to know if this procedure occurs with all software updates or is it selective based on the type of update? This time is concerned Airport. Thanks for any insight.
Are you running as an Admin User or non-Admin? ie. have you set your Mac up with multiple user accounts - one as an Admin and one as a Standard user?
For security, you are better off having an Admin user account that has Admin privileges and a Standard user account that you use from day to day with standard privileges. When you install system updates you will be required to enter an Admin name and password, and any software that needs access to the system will require an Admin name and password, but anything that you install just for your user account that doesn't require total system access will be able to be dragged and dropped into your Application folder as per usual.
MacDefender runs in a web browser - that should be a huge red flag! If you see a warning when you are running Safari or another web browser close the browser window or Force Quit it. (under the Apple Menu => Force Quit...) In Safari Preferences untick Open "safe" files after downloading. (It will prevent an installer from automatically launching if something nasty is downloaded to your machine.) MacDefender and its variants attempt to trick people into installing stuff that will compromise their system. If something pops up unannounced on your machine that you didn't download, close it and delete it.
This article goes into depth about the MacDefender Malware:
http://rixstep.com/2/20110610,00.shtml
The salient points are summed up in the "Recapitulate" section at the bottom of the article: It's a bit Hipster Geeky.
"To Recapitulate
As recounted elsewhere, the Mac Defender attack is a well thought out attack that may have taken months to get together. The first step was to compromise websites of eejits, hack their FTP accounts, and upload dynamited files to their servers.
Then followed the Google whacks which led to people clicking on links they'd provided at the sites they'd hijacked.
And then finally they uploaded Mac Defender so people would get hit by it. And the purpose of Mac Defender is to scare you into thinking you're infected so you pull out your credit card.
Then the hackers run away with your credit card info and buy mink coats and chinchilla coats or whatever they want.
But staying clear of Mac Defender is really easy and doesn't require any AV software.
Don't ever open anything you didn't want to download.
Turn off JavaScript when accessing any Google Images site.
Make sure you don't have Safari set to automatically open downloads."
I'd add, keep your software up to date. Especially Adobe's Flash Plug-in as this is no longer supplied in system updates by Apple and could become an attack vector in the future. Always download software from reputable sources - ie. when downloading the Flash plug-in, get it from Adobe directly - don't follow a link from a website that tells you your version of Flash is out of date.
Enable your Firewall in System Preferences => Security => Firewall. Click on the Advanced button and Enable Stealth Mode too.
Also under:
System Preferences => Security => General.
Disable Automatic Login. Require a password to unlock each System Preferences pane. Use secure virtual memory. Automatically update safe downloads list.
Educate yourself. -
How to remove "Enter your name and password for the server"
Hi there,
I have a Mac Book Pro from 2008. I have mountain lion running on it.
We used to have a server (pc) in the office that I connected to and stored all of my photos and videos etc.
We have jsut upgraded to a new server and this connects great!
However, ever since the switch, when i open keynote, imovie or iphoto i get the error message:
"Enter your name and password for the server "192.168.0.10".
(it is trying to connect to the old server)
I have tried a bunch of fixes online but i dont think they are relevant for this issue - or i cant find what they want tme to change or remove.
Any help would be great! having this pop up while trying to create things slows everything down.
thanks!!Hi Tom! Welcome to the Apple discussions. You have posted in the forum dedicated to the application Appleworks. Your question is better to post in the forum for MacOs 10.6. In that forum you have several sub-forums to choose from.
Maybe you are looking for
-
SharePoint 2013 Foundation Top Link Bar wrong selected page when no navigation match
Hello, I've got the following issue. At one of my clients we are working on a public web site based on SharePoint 2013 Foundation (yes I know... Foundation...). I've branded the Top Nav Bar and ran into a problem. When I navigate to one of the pages
-
How do I install Ubuntu server on a mac osx.
Ubuntu 10.04 sever (getting a mac in a few months) I want it to work under the ext4 file system.
-
Best way to sync Lightroom 5 Collections to IOS8 IPad and IPhone (offline available)
Hello, I have looked at several options but have not found an elegant solution yet to a problem that many users must have. Problem I have a lot of Collections in my Lightroom Library and would like to make them available to my iphone and ipad to show
-
why i can't access firefox
-
My husband sent me a vcard via his blackberry to my Yahoo email, which I receive on my iPad. I tap on it, it asks if I want to add to contacts (existing in this case), upon which the mail suddenly quits, and no info is added to the contact. Any thoug