In wms continuous to the automatic storage type and bin in the destination

hi
Thanking for givining the solution ,In continuous to the automatic storage type and bin in the destination your telling that fixed bin should be enter in the wm2 view in the mm01 ,
i am not getting fixed bin means which bin should i enter in the mm01 wm2 view can explain clearly.
thanks

First you create your WM views in MM01 with just entering the warehouse number but no storage type in the organisation pop-up.
Once you have done this and saved the material master, you do again MM01 for the same material number and select the WM 1 and 2 view and enter the warehouse number AND the storage type number in the organisation pop-up.
Now SAP gives you some more fields in WM2 view. AMong them the fields you are looking for.

Similar Messages

Automated storage type and bin in wms

hi
In continuous how can we use the fixed bin method in the mm01 without using the putqway strategy
how to get the storage type and bin in the transfer order at the destination pop up.

Hi
On navigating the transaction MM01 --> Organization level , you can get a field storage type below the plant and warehouse number fields.
After entering into the Warehouse view, you can find a section
"storage bin stock"
and enter the Bin against the field
"Storage Bin"
Gobinathan G

Automated storage type and bin

hi
thanks for givining reply
i extened the mmo1 and while doing the lt06 this storage type is coming in the destination place but the bin not coming error is coming there is no bins in the storage type
can u tell me is there any setting required in storage type .
fixed bin means which u mentiones in wm2 view i had given only some bin which created in the storage type .is it correct.i will not activated the storage section check in storage type .
can u tell me step by step .

Hi,
Here you can find the prerquisits of fixbed bin putaway strategy:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/c6/f844834afa11d182b90000e829fbfe/frameset.htm
When you get the error message, please goto menu > Enironment > Stor. Bin Search Log - here you can see what is the problem.
In LX03 you can list the existing storage bins in your stoarge type - make sure you really have the bin.
Regards,
Csaba

How can I search the attribute including type and length of the field in the SD table or form such as sales executive table through debug?

Some users show that the sales docment external name is not printed completely in the form of delivery form printing, so I want to find how much length of the field is there through debugging. I am very expected to gain some suggestion from you.

for exploding the bom if you know header material use
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
    EXPORTING
      CAPID                 = 'PP01'
      DATUV                 = SY-DATUM
      MEHRS                 = 'X'
      MTNRV                 = P_MATNR
      WERKS                 = P_WERKS
    TABLES
      STB                   = I_BOM
    EXCEPTIONS
      ALT_NOT_FOUND         = 1
      CALL_INVALID          = 2
      MATERIAL_NOT_FOUND    = 3
      MISSING_AUTHORIZATION = 4
      NO_BOM_FOUND          = 5
      NO_PLANT_DATA         = 6
      NO_SUITABLE_BOM_FOUND = 7
      CONVERSION_ERROR      = 8
      OTHERS                = 9.
now check PLPO & PLKO table for routing or AFVC and AFVV for routing.
if production order created you have to check in afvc and afvv else check in plpo and plko.
for checking with plpo and plko you have to check MAPL table.
for bom and material link
MAST,STPO,STKO.
stlnr is the common field
regards
shiba dutta

Default settings for source storage type and storage bin ..

Hi,
While doing Transfer Order ,I want to make the source stage type and bin as default values.Where can I make these settings?
i am using normal WM and not Lean WM
Edited by: Roopak India on Sep 4, 2009 7:22 AM

Please check settings as mentioned
1. SPROEnterprise StructureAssignmentLogistic Exe check all the assignment here
2. then SproLogistic ExeWM--master data , check whether storage types are properly defined or not
3. then you have to Activate the search strategy at SproLogistic ExeWM--strategy --> Activate Storage type search
Thanks,
Raja

What is storage type and storage bins

explains the terms, storage type and storage bins, stock at production storage

Hi Ahmed
Inventory Managemenet can be done either at Storage location ( using Lean warehouse Management)or at storage bin level ( using full warehouse Management).
General ( EWM)
[http://help.sap.com/saphelp_scm50/helpdata/en/5f/c69040bca2ef4ae10000000a1550b0/frameset.htm]
Storage type
[http://help.sap.com/saphelp_ewm2007/helpdata/en/97/d94541c47a6e24e10000000a155106/content.htm]
Storage bin
[http://help.sap.com/search/highlightContent.jsp]
[http://help.sap.com/saphelp_sm32/helpdata/en/35/26c132afab52b9e10000009b38f974/content.htm]
Cheers !!
Ajay

Automatic TO Creation and Confirm for the 321 Mvt type

Hello Experts,
Like to know the customisation invovlved for automatic TO creation and confirmation for the 321 movement type in which QM is activated.
I have already activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe
2.TO item to be confirmed immediately
3.Propose confirmation
Table T333 -AUTTA
          T333-SQUIT &
          T333-VQUIT is activated.
Please let me know any other settings to be performed
Regards
Krishna

Hello Experts,
I am trying to create the Automatic TO and TO confirmation for the mvt type 321.
I made the below settings
I have activated in OMKZ as below
1.Automatic TO for 321 mvt ytpe   -"A"
2.TO item to be confirmed immediately - tick mark
3.Propose confirmation   - tick mark
Table T333 -AUTTA
T333-SQUIT &
T333-VQUIT is activated.
I have activated in OMKX as below
Table T321-TBFKZ Immediate TO Creation with "A"
T321-TAFKZ TR creation with "X"
After doing the settings i am not able to see the Posting change number in the Material document created for the mvt type 321.
Please let me know how to create the Posting chnage notice for the material document and how to convert the Posting change notice to automatic TO and confirmation.
Thanks & Regards
Krishna
Edited by: Hariharan krishna on May 25, 2011 8:01 AM

WM-PP : Backflush a material from different bins in the same storage Type

Hi Gurus,
We have a business scenarion where we do manual staging for production , the staging area has different bins within the same storage type for the same material, I am wondering if there is a way to backflush the material from different storage bins upon prod. order confirmation (using a control cycle?)
Thanks
Kris T

Look like it's not possible using the SAP standard.

Bins in the interim storage type

Hi
The client has a requirement where the interim storage type 902 (GR Area External Receipts) needs to be bin managed. i.e. it should be possible to select the bins manually. Std. system has PO no. as dynamic bin. Is this possible? If yes, how??
Thanks in advance
DB

yes, this is possible..
Check the documentation(sap library) on this for details..

WBAdmin BMR backup says "There is not enough free space on the backup storage location to back up the data."

We're doing nightly BMR backups of a small 2012 R2 Hyper-V host via wbadmin to 2TB USB disks, via
wbadmin start backup -backupTarget:z: -quiet -noverify -vssFull -include:e:,c: -allCritical
(where E: contains the sole VM).
We are using the same backup system on other similar Hyper-V hosts running 2008 R2 and 2012, with no problems. However, with this 2012 R2 host, after a few months of no problems the backups started failing with:
There is not enough free space on the backup storage location to back up the data.
This made no sense, and continues to make no sense:
The 2TB backup disks are only half full (>1TB free), with 600GB of unallocated shadowstorage.
There should be room for many more backups on these disks. Each currently contains 11 to 13 backups, with the initial full backup having required about 600GB and each subsequent backup only requiring another 20GB to 40GB.
There is over 40GB free on the C: drive and 300GB free on the E: drive; free space on the host volumes is not an issue.
Increasing the shadowstorage limit on the backup disks to unbounded doesn't resolve the issue.
This is not a problem of a RECOVERY partition that's too small, and SystemState backups always complete successfully.
The first workaround we found was to temporarily reduce (not increase) the shadowstorage allocation on the E: drive (containing the VM) and then increase it back (with the end result of deleting old shadow copies).
This worked reliably, but looking for a root cause led us to uninstall the Windows Updates installed mid-September (in particular the Aug 2014 and Sep 2014 roll-ups), which preceded the start of this problem. But instead of resolving the problem the uninstalls
made it worse, in that our workaround stopped working.
We reinstalled the Windows Updates, and then tried setting backup performance to normal, in case the problem was related to VSS on the host volumes, but the errors continued.
At this point the only way we've found to work around the error is to delete 1 or 2 of the oldest backups on the destination disk, via
wbadmin delete backup -backupTarget:z: -deleteOldest
after which the new backup will succeed.
But, again, this makes no sense, as the destination disks are only half full, and even if space was an issue wbadmin should delete old backups as required. And this same system is working fine on 2008 R2 and 2012.
Any suggestions?
Thanks,
John

Hi John,
Please check run the command below to check if the space required to complete the backup causes the snapshot storage space to become less than 1/8 of the target size.
vssadmin list shadows /for=x: will list the shadow copies on x: and creation time.
WSB will not shrink the diff area to less than 1/8 of Target volume size as we do not want to lose all past backups just to accommodate this one.
For more detailed information, please refer to the article below:
Windows Server Backup automatic disk usage management
http://blogs.technet.com/b/filecab/archive/2011/03/14/windows-server-backup-automatic-disk-usage-management.aspx
V. Backup, Restore and Disaster Recovery
http://social.technet.microsoft.com/wiki/contents/articles/1846.v-backup-restore-and-disaster-recovery.aspx?Sort=MostUseful&PageIndex=1
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. Any ideas?

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?

When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

I am using Firefox 7.When I tried to open a player the install instructions from the website says, download the widevine plugin from the automatic download pop-up,but my Firefox browser doesn't show me the automatic download pop up to download the plugin.

The automatic download pop up for downloading the plugin was not showing in my firefox 7 browser.

Hi and thanks to not leaving the firefox user alone.
Cor-el your answer is right as the madperson is and I already knew all these
answer and I said that before I don’t use any antivirus and I always turn off my firewall from the moment I installed my Windows.
I even turn off any automatic update for any of my software and I never let any unknown plugins or any thing like that be install without informing me. And if you know some things like Offline Storage and cookies must be to much more than usual and you have to clear them and delete them and I know so much more
And if you want to know it fixed now. But I don’t know how?
For understanding my problem read and research about Ixplorer.exe virus it is the same problem about the speed but the different is it doesn’t show any process in task manager like Ixplorer.exe virus
Bt I have done some things but still I don’t know that’s why it is fixed or not
First: I searched my system and removed any files have been crated on my system from two days ago since the problem happened.
And then I used to go about the article in this page and did like this:
http://answers.yahoo.com/question/index?qid=20080910101846AAazxN5
but still I don’t know any thing about the problem.
I can do so many things to fix but I am just curios if that is a virus why it just cut the speed when I am using the browser.
Please if any one found the reason send me your information I like to know it will improve my knowledge however my problem is solved fro now.

I was trying to change my password and somehow it automatically reset the password for me and I closed the window and now I can't log in. What do I do?

I was trying to change my password and somehow it automatically reset the password for me and I closed the window and now I can't log in. What do I do?

HI,
This post in in iChat (forum) but I have no idea from what you posted if it is about iChat and if so what account type you were changing the password on.
9:25 PM Wednesday; June 12, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Storage Type and storage bin in MB26 pick list

Hi,
We want to print a pick list using MB26. The pick list should contain the warehouse number , storage type and storage bin. I have found that in the layout of MB26 pick list, we can pull these fields. However, the values of these fields are not getting pulled in the list.
Can you please help me to understand if I need to do some setting/config so that warehouse number, storage type and storage bin can be pulled in the MB26 report.
Thanks,
Shekhar

if it is a standard output if you go to the output type you can see what are the standard fields included in the pick list but if it is a custom one please contact your functional consultant who designed or look at the spec to see the design/mapping of fields.
Please let me know if thhis helps.

How to distribute HU items in to diffrent storage types and diffrent BINS

Hi
I have one handling unit and I have done empty all 4 items in it HU02
As a result one material document created
But How can I distribute all items in to diffrent storage types and diffrent BINS
No TR and Posting change created at material doc
What is the config settings to cretae TR ot Posting change notice and Movement types
Kindly Help

yes LT10

In wms continuous to the automatic storage type and bin in the destination

Similar Messages

Maybe you are looking for