In Work flow Iam enable to change the start event which I gave .

In Workflow Iam enable to change the start event .The message is 'not modifiable'.

Hi,
1. If you are in QA or PRD system or rather in test client of development system, you will not be able to chage the event linkage as for these systems, client status is maintained as non-modifiable.
2. second reason may be you are trying to change the event linkage when you are in diaply mode of transaction rather than chage mode !
Hope this helps.
Regds,
Akshay

Similar Messages

Work flow status is not changing

Hi,
The work flow is not ending. The last approver is getting the item in his inbox repeatedly though he has approved it previously and the workflow status is showing as still in progress.
Please kindly help me to solve this
Regards,
Sekhar.

Hi Chandrashekar,
When we create w work item in the workflow, we specify the thing we want to perform in it.When the task is perform we need to set the event for the end task.Event can be repoting higher autority , a mail or something.After we set a task or work process we need to handle the end manuallly.It never gets terminated itself but we have to terminate it manually.Even if you are sending the approval from the user after task completion and you must have ended the procedure.Now as the last task is not handeled properly.That is executing in endless loop.So you may go for termination of workprocess after the last mail.If you have used loop untill please use container with it.It will be helpfule.Hope your query resolves soon.
Have a best day ahead.

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

Hi Hannah,
Inspector > Text > Tabs Button > Tab Settings > Default Tabs.
To set a tab stop on the go, click in the ruler.
If you can't see the ruler, Menu > View > Show Rulers.
To set tab stops for lines (paragraphs) you have already typed, select those paragraphs and set them all at once.
Also, have a look at Menu > Pages > Preferences > Rulers.
Regards,
Ian.

Mac Mail Issue: I was having trouble sending to hotmail accounts from my Earthlink account, they had me go into Mac Mail preferences and make changes, now Mac Mail doesn't work AT ALL - any help changing the settings back to correct Mac Mail settings? I c

I was having trouble sending to hotmail accounts from my Earthlink account, they had me go into Mac Mail preferences and make changes (because they claimed it was Mac Mail's fault, even though the hotmail error code said it's because Earthlink is blocked by hotmail), now Mac Mail doesn't work AT ALL - any help changing the settings back to correct Mac Mail settings? I can provide a transcript of the entire tech chat session, if that will help...

both apostrophes are used correctly, thanks
doesn't = does not (this is called a contraction)
it's = it is
Mac Mail's fault = possessive
any help with the actual issue? thanks!

My sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do?

my sistem preferences are not working, when I try to change the photo of the desk It stop working, what can i do? I'm dieing cause I'm afraid

Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

HT201303 Hi this is Sai I was trying to change my card details because my old card is not working so I want to change the details . So can you help me out please

Hi this is Sai I was trying to change my card details because my old card is not working so I want to change the details . So can you help me out please ..
<Edited By Host>

These are user-to-user forums, you are notalking to Apple here - I've asked the hosts to remove your email address from post.
Are you not able to log into your account and change your account details e.g. via Store > View My Account on a computer's iTunes ?

How i can back up my i phone ore restore back up if it keeps to say password is wrong. i tried every possible psw ds does not work. now i want to change the password it wants old pswd and i do not know it. what can i do?

how i can back up my i phone ore restore back up if it keeps to say password is wrong. i tried every possible psw ds does not work. now i want to change the password it wants old pswd and i do not know it. what can i do?

Sorry, but if you have forgotten the password for your encrypted backup, you'll have to start all over again:
Make sure that the password you use is one that you'll remember. If you encrypt an iPhone backup in iTunes and forget your password, you won't be able to restore from backup, and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and choose set up as a new device when iTunes prompts you to select the backup from which to restore.
copied from Create and delete iPhone, iPad, and iPod touch backups in iTunes

How to change the script event?!?

Here I have a small form with two different parts...
The first part is a table containing many checkboxes to be able to show whatever form you want to fill up..
All of the checkboxes create a form into a table which each row represents the form to fill-up.
When you click 1 checkbox, it adds a row to the table with some values needed for the form..
In that form there is a chance to have 2 or 3 radiobuttons, depending on the checkedbox which each do something different..
the 1st one hides a new table to fill up information (under the radiobuttons),
the 2nd one shows up the new table with some values to show instructions into labels...
the 3rd one shows up the new table with some other values to show different instructions into labels.. (This radiobutton is only in half of the forms, so it is hidden)
those labels must be different for each checkbox chosen
instead of making a huge script in my radiobutton change event, and writing all the different possibilites
i'd rather create the script depending on the checkedbox the user have chosen...
Right now I'm using something like : this.resolveNode("...radiobuttonList").event__change.script.value = "--_ Write all the new code here_--";
After this line is written and everything is working... I show up a messageBox to see the result which is all correct..
But when I'm clicking on the radiobuttons nothing is working at all...
the only code working is the initial code written in the event
Anyone have an idea if I'm missing something?!?
Thanks!

Actually this is not what i was looking for, I really need to change the script...
e.g. I have a button in a expandable table and i want each buttons to have a different messagebox....
when the button is created a new script is assigned to the event_click...
This is what im looking for...
Looks like LiveCycle Designer is not able to change the scripts events even though the property is there and is a "get" & "set"
so I should be able to change script event.... but I think i need to reload/recreate the form by using the modified code...

How can we change the purchasing group which it is maintained in R/3?

Hello All.
In case of MM, purchasing group is assigned to material master.
It means purchasing group is maintained based on material code.
But SRM has different maintenance level.
As you know that purchasing group has the responsibility based on material group (Product category).
So we should change the purchasing group from R/3, when end user create shopping cart.
How can we change the purchasing group which it is maintained in material master?
Thank you,
Best regards,
SH.

Hello So Hee,
I am not a technical guy.
But for your requirement i am building a logic.
I am not sure whether it will work.
You need to check with your ABAPER.
It is as below:
When the SC is approved and the other configuration is correct ,
PR is created in ECC by the virtue of BAPI.
You want that the pur grp should be populated on the base of matl code and not on matl grp.
Hence in SC you will not fill up pur grp.
In the programme for BBPSC01 i.e. SC creation you will add modification that it will call a custom FM.
This custom FM will get the matl code from SC and will find the value of pur grp from R/3 MM01i.e. matl master(you may get in MARA).
Now in the BAPI you need to incorporate this additional value of yr pur grp field.
So the desired pur grp as per yr R/3 matl master will be populated in yr R/3 PR.
Again: this is all hypothesis.
That's all I can help you.
BR
Dinesh
<b>Reward if helps</b>

How do I change the folder in which Mail saves sent e-mails (On my Mac)?

If I send an e-mail from my iPad, te e-mail is saved in "sent items". However, if I send an e-mail from my Mac, with mail, the e-mail is saved in another folder: "Sent Messages".
I know I can easily change the folder in which the iPad saves sent e-mails, but I would like to change this setting on my Mac, so that the Mac saves sent e-mails exactely where the iPad saves snet e-mails.
Is it possible to change this setting on the Mac?

Bryan.O wrote:
Is it possible to change this setting on the Mac?
There might. (Stress, might.)
Quit Mail.
Make a backup of <~/Library/Preferences/com.apple.mail.plist>.
Open it with a suitable text editor (eg, TextWrangler), or plist editor (eg, Xcode, Pref Setter).
Look for the key "SentMessagesMailboxName". Replace the string "Sent Messages" with what you want.
Repeat for every such key. Save.
Launch Mail. Test. If anything goes wrong, replace com.apple.mail.plist with the backup.
Warning: I have not tested this myself, so I don't know if it works and/or if it causes any problems.

How do I change the start up language from French to English??

How do I change the start up language on a new Apple TV2?

My problem was everything was in French and I don't speak/read French so I couldn't even get the country setting or internet password to work. A very helpful technician called me and walked me thru it and now it seems to be working. Thank you.

There was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected.

here was start up glitch on desktop, which changed the computers configuration, which requires activation on Adobe Photoshop CS, but am not able to get throug activation system and phone support has been disconnected. How should I activate my software.

You are entitled to the CS2 version that will work without activation, since the activation servers were taken offline. Read the instructions and follow them on this page.
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

How can I change the order in which songs appear in my iTunes Music Library?

How can I change the order in which songs appear in my iTunes Music Library?

Kay,
If you are looking at the entire music library ("Music") you can sort by any of the columns by clicking the column header. If there is a column you can't see, enable it by going to View > View Options.
Within a playlist, you can do the same, and in addition you can click above the column of sequence numbers, which will then allow you to drag tracks up or down to get any order you wish.

How can I change the order in which photos are presented on an Apple TV?

I am showing photos on my Apple TV via my Apple MacBook, iTunes and Home Sharing.
That all works nicely for me, except that I wish to change the order in which a few photos
are being presented. How can I change the presentation order on the Apple TV?

Welcome to the Apple community.
You'll need to change the order in iPhoto. Open the album you wish to re-order, manually sort them to the order you want, then use the time and date and batch change options as applicable from the photos menu to retag your photos.

Change the order in which the processes come up on restart

Is there a way to change the order in which the processes come up again when restarting the OC4J?

Hi --
Do you mean the order of the applications deployed to an OC4J instance, or the processes started by OPMN when OracleAS is started.
For the former, we put the application entries into a ordered map based on the order they are seen as in the server.xml file. While we don't offer a feature that the applications will definitively be started in that order, we do work our way through the ordered list. So for more parts you'll see the application starting the same order as they are seen in server.xml.
For the latter, I'm not sure. I also tend to think that its again based on the order within OPMN. What you can try and use is the opmnctl startall sequential=true command, which will sequentially start each process, where it waits for the previous process to start before starting the next one. That will at least show you the order the processes are starting in and help you test the opmn ordering hypothesis.
cheers
-steve-

In Work flow Iam enable to change the start event which I gave .

Similar Messages

Maybe you are looking for