In xi server , client admin

hi
in single xi server , can it possible to do client admin, user admin, tms and all in single xi server without any support of ecc 5.0 or 6.0 or else ? - plz give me the sugg
thanq

Yes.
As for suggestion, I would recommend the "Introduction to Basis Administration" course
ADM050 or ADM100

Similar Messages

\\SERVER\Clients\Setup\setup.exe with Windows Vista Error

I added the first Vista client to an SBS 2003, SP1 domain. Until now, all clients were WinXP, SP2. Office 2003 is installed on the XP clients, and the Vista client, which may not be pertinent to this problem.
As is normal, "\\SERVER\Clients\Setup\setup.exe /s SERVER" is executed when a user logs on to any domain client. On the Vista client, I always get the dialog -- regardless of the account privilege -- asking for permission to run Setup.exe. It is annoying. Occasionally, the Program Compatiblity Assistant will appear and advise there's a known compatiblity issue with Setup.exe. It points to KB article 926505 for resolution. The title of the KB is, "Windows Small Business Server 2003: Windows Vista and Outlook 2007 compatibility update."
When I run the SBS2003SP1-KB926505-X86-ENU.EXE fix, I get the error: "This update cannot be installed. Either it is already installed as part of an existing service pack, or it requires a more recent service pack. For more information, see the systems requirements on the download page."
I installed Windows Server 2003 SP2 and run the KB926505 fix, but I get the same error "This update cannot be installed. Either it is already installed as part of an existing service pack" After a reboot of te SBS server the same problem on the Vista client, I always get the dialog -- regardless of the account privilege -- asking for permission to run Setup.exe. It is annoying. Occasionally, the Program Compatiblity Assistant will appear and advise there's a known compatiblity issue with Setup.exe. It points to KB article 926505 for resolution.
The problem is Windows Vista Business, because all windows XP clients have no problem at all.

PNP,
You do not say whether if you accept the permission dialog whether the setup continues or not, but the short answer to the question revolves around UAC.
Remember that EVERY user (except the actual Administrator account) has only Standard user rights regardless of group. When a task that requires Admin rights is executed, one of three things will happen: 1) If you are THE Administrator, then your task will continue. 2) If you have Admin rights, you will be prompted that a process is trying to use elevated rights and ask for permission, or 3) If you are a Standard user, you will either be denied flatly or prompted to supply credentials. Which of these happen depend on GPO settings, but the default is to prompt.
In any event, I believe that this is what you are running into, and is one of the big feature improvements in Vista. Yes, it can be a bit annoying (Try deleting an "All Users" icon from the Start Menu!) but is there to place one more barrier between virus and malware writers and your OS.
If it's TOO annoying to bear, you can turn off UAC by going into your profile and disabling it. (It requires Admin rights, of course. ) It is not recommended as you do a very effective job or nutering the Vista Security Model by doing so.
If it, of course, your choice. we IT Admins have a lot more issues with this than the standard user, but for me, I gladly take the tradeoff because I worry a lot less about those few I HAVE to give Admin rights to.
Good luck!

Uncaught exception raised in Server Client-side plugin

When I try to connect to my XServe from the Server Admin on my desktop computer. I get the following error:
Uncaught exception raised in Server Client-side plugin
Sorry but the feature you tried to access cannot be used. Exception is:
In updateConfigurationViewFromDescription: NSInvalidArgumentException * -[NSCFNumber count]: unrecognized selector sent to instance 0x18819ee0 .
There is a second error with similar wording.
If I say ok to the warnings I can make changes but they do not save.
I can access the Server Admin on the XServe
Anyone know of a solution so that I can login and edit the settings for my XServe from a remote computer?

I'm getting this too, server is XServe running 10.6.6, remote Server Admin is on a 10.5.8 PPC iMac. No errors with same remote against a PowerMac server running 10.5.8. No errors with 10.6.6 remote against either server.
Unlike the OP, however, the changes I've tried "take." The pop-ups are annoying though.
Another issue with the 10.5 Server Admin/10.6 Server, if it isn't a thread hijack, disk volumes do not show up in the File Sharing pane, Share Points appear OK.

ARD 3.0 Client error - Server/client misconfiguration?

Background: ARD 3.0 (10client) serving 6 CPUs from iMacs to Mac Pros, Admin is a PB15, all are running 10.4.9 (OS or Server). Admin/Client Version 3.1
ARD was working well until I "converted" an idle PMG5 to OSX Server (10.4.9) via clean install. Now when launching ARD, the server goes unrecognized. UserID/Pass checked and verified; ARD Sharing checked and verified. Network is solid - I can ping without error.
In ARD, the server appears by IP address, but icon is grey "No ARD Client response." It's IP is in the range of the other CPUs in the group, but it is responding like a APX or AEBS.
Clues? Hints? I'm pulling my hair out on this one.
Thanks in advance!

Try removing the ARD client from the server using the instructions here and then reinstalling the client.
Good luck.

Regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections (any ideas???)

regarding mountain lion server: clients experience intermittent service connections. the server system log has the following error- Client handshake failed (6):113: Server not accepting client connections. any suggestions would be greatly appreciated - thank you

Hi Jason
I was getting the same behavior after Apple support had me delete some plist files to get Airplay going. I was also getting the following error:
the error occurred while processing a command of type 'writesettings' in the plug-in 'server vpn'
I went into ~/Library/Preferences/ and /Library/Preferences/ and deleted every plist contating the word server. I had to re-set up my server (meaning walk through some intial steps) but all of my settings were still there after that and everything started working again.
Just a thought, obviously try at your own risk but it worked for me.
Kellen

Sun Oner Application Server 7 Admin Console doesn't start

When I start the Admin Console for Sun One Application Server 7, and after I login, the admin console doesn't display in the browser. I have tried starting the admin console with IE and Netscape browser, but the admin console has failed to start in either IE or netscape.

-Type this in your IE
http://localhost:4848
-IF it does not work type the following
http://kishan:4848 ("kishan" is your machine name)
-IF it does not work do the following
Forgot the Admin Server Port Number? If you do not remember the HTTP server port number of the administrative server, you can inspect the administrative server's configuration file to determine the HTTP server port number.
1. Navigate to the <domain_config_dir>/domain1/admin-server/config/ directory.
2. Open the server.xml file in your favorite editor. Look for the element:
<http-listener id="http-listener-1" address="0.0.0.0" port="4848"...
In this case, port 4848 is the HTTP port number in use.
Forgot the Username or Password? If you do not remember the administrative user name that was supplied during installation, try the user name "admin". This is the default user name specified in the server configuration dialog during installation. If you still cannot determine the user name, look in the following file:
<domain_config_dir>/domain1/admin-server/config/admpw
This file contains the administrator's user name followed by the encrypted form of the administrative user's password.
If you do not remember the administrator's password, then you can delete the administrative domain using the delete-domain subcommand of asadmin and create a new domain with a new administrative password.
Port Not Accessible? If the connection was refused when attempting to contact the administrative server's admin console application, it is likely that the administrative server is not running. Go back to the beginning of this section and double check the your startup procedures and the content of the administrative server's log file to determine the reason why the server is not running.

O.S. / Hard Drive Size for NIO Server/Client's load testing...

Hi All
I am currently load testing a NIO Server/Client's to see what would be the maximum number of connections that could reached, using the following PC: P4, 3GHz, 1GB RAM, Windows XP, SP2, 110 GB Hard Drive.
However, I would like to test the Server/Client performance on different OS's:
Which would be the best possible option from the following:
1. Partition my current drive, (using e.g. Partition Magic), to e.g.
- Win XP: 90 GB
- Win Server 2000: 10 GB
- Linux: 5 GB
- Shared/Data: 5 GB
2. Install a separate Hard drive with the different hard drives
3. Use a disk caddie, to swap in/out test hard drives.
4. Any thing else?
- Would the Operating System's hard drive size affect the Server/Client's performance, e.g. affecting the number of connections, number of File Handles, the virtual memory, etc.?
Many Thanks,
Matt

You can use a partition on the same HDD or use a second HDD, disk caddie well if its a direct IDE or SCSI. If its usb no it will be too slow, may be if you have a fire-wire but I still don't recommend it.
Be careful if you don't have any experience installing Linux you may do multiple partitions on you disk without knowing, because Linux ext partitions are not visible to windows.
Recommended disk size for fedora is 10 GB. This is the amount of data that will be created on you HDD when you do a full installation.

Java Server/Client Applicaton - problem with sending data back

Hello!
I'm trying to write a small server/client chat application in Java. It's server with availability to accept connections from many clients and it's app just for fun... However, I've come up against a huge problem: everything what clients send, arrives to server (I'm sure about that because it is displayed on the Server Application screen) and then server should send it back to all clients but it doesn't work. I have no faintest idea what causes this problem. Maybe you can help me?
Here is my server app code:
import java.net.*;
import java.util.*;
import java.io.*;
* @author Robin
public class Server {
    ServerSocket serw = null;
    Socket socket = null;
    String line = null;
    Vector<ClientThread> Watki = new Vector();
    ClientThread watek = null;
    public Server(int port) {
        try {
            serw = new ServerSocket(port);
            line = "";
            while(true) {
                System.out.println("Running. Waiting for client to connect...");
                socket = serw.accept();
                System.out.println("Connected with:\n" + socket.getInetAddress() + "\n");
                watek = new ClientThread(socket);
                Watki.addElement(watek);
                Watki.firstElement().Send("doszlo?");
        }catch (IOException e) {
            System.out.println("BLAD: " + e);
    public void sendToAll(String s) {
        for(int i = 0; i < Watki.size(); i++) {
            Watki.elementAt(i).Send(s);
    public class ClientThread extends Thread {
        Socket socket;
        DataInputStream in = null;
        DataOutputStream out = null;
        String line = null;
        public ClientThread(Socket s) {
            try {
                this.socket = s;
                in = new DataInputStream(s.getInputStream());
                out = new DataOutputStream(s.getOutputStream());
                start();
            }catch (IOException e) {
                System.out.println("BLAD: " + e);
        public void Send(String s) {
            try {
                out.writeUTF(s);
            }catch (IOException e) {
                System.out.println("BLAD: " + e);
        public void run() {
            try {
                line = "";
                while (true) {
                    line = in.readUTF();
                    System.out.println(line);
                    sendToAll(line);
            }catch (IOException e) {
                System.out.println("BLAD: " + e);
    public static void main(String[] args) {
        Server serwer = new Server(5000);
}And here is client app code:
import java.net.*;
import java.util.*;
import java.io.*;
* @author Robin
public class Client implements Runnable {
    Socket socket = null;
    BufferedReader keyIn = new BufferedReader(new InputStreamReader(System.in));
    DataInputStream in = null;
    DataOutputStream out = null;
    String line = null;
    public Client(String host, int port) {
        try {
            System.out.println("Connecting to " + host + ":" + port);
            socket = new Socket(host, port);
            System.out.println("Connected\nTALK:");
            out = new DataOutputStream(socket.getOutputStream());
            in = new DataInputStream(socket.getInputStream());
            line = "";
            while(!line.toLowerCase().equals(".bye")) {
                line = keyIn.readLine();
                Send(line);
        }catch (UnknownHostException e) {
            System.out.println("BLAD: " + e);
        }catch (IOException e) {
            System.out.println("BLAD: " + e);
    public void Send(String s) {
        try {
            out.writeUTF(s);
        }catch (IOException e) {
            System.out.println("BLAD: " + e);
    public void run() {
        String loaded = "";
        try {
            while(true) {
                loaded = in.readUTF();
                System.out.println(loaded);
        }catch (IOException e) {
            System.out.println("BLAD: " + e);
    public static void main(String[] args) {
        Client client = new Client("localhost", 5000);
}By the way, this app is mainly written in English language (text that appears on the screen) however in functions I used Polish language (for example: BLAD - it means ERROR in English). Sorry for that :)

Yeap, I will change those exceptions later, thanks for advice.
You asked what's going on with it: both applications start with no errors, but when I write something in client side it should be sent to the server and then forwarded to all connected clients but it stops somewhere. However, I added a one line to the server code
line = in.readUTF();
System.out.println(line);
sendToAll(line); and after it reads message from client (no matter which one) it shows that message on the server side screen, then it should send this message to all clients but it doesn't work in this moment. What's confusing: no errors occurs, so it's rather a mistake in my code, but where?
Edited by: Robin3D on Sep 30, 2009 9:07 AM

JMS Internal Error at Server Client Adapter!JMS Service is not started

Hi
Can any one tell me how to trouble shoot for following errors:
Failed to Create Connection! Reason: Response from the server could not be reached.
JMS Internal Error at Server Client Adapter!JMS Service is not started
The following hosts could not be reached 143:223:221:10:50310
We are trying to send the request from SONICMQ JMS to R/3 and trying to post the response to Sonic Queue. but we are facing some problems for JMS adapter .
but in JMS sender and receiver adapter i gave different IP and port for listen the SONIC queue. why it is showing in different IP here? this message got from logviewer.
regards
Rambarki...

Rambarki,
What is the error displayed on the Adapter Monitoring pages?
Generally the correct error descriptions for connectivity issues are found on adapter monitoring UI than any other.
Other possible reasons could be :
<i>JMS Service is not started
The following hosts could not be reached 143:223:221:10:50310</i> This might be issue with your network settings i.e. XI server is unable to reach the specified IP on specified port.
Regards,
Amol

Pb with command "Oracle_express\app\oracle\product\11.2.0\server\rdbms\admin\catalog.sql"

Ello,
I create a base manually
when I execute the command
sqlplus /nolog
connect /as sysdba
@Oracle_express\app\oracle\product\11.2.0\server\rdbms\admin\catalog.sql
a the end I have the error
Comment created.
Comment created.
Grant succeeded.
DOC>######################################################################
DOC>######################################################################
DOC>    The following PL/SQL block will cause an ORA-20000 error and
DOC>    terminate the current SQLPLUS session if the user is not SYS.
DOC>    Disconnect and reconnect with AS SYSDBA.
DOC>######################################################################
DOC>######################################################################
DOC>#
DECLARE
ERROR at line 1:
ORA-06553: PLS-213: package STANDARD not accessible
Disconnected from Oracle Database 11g Express Edition Release 11.2.0.2.0 - Production
Somebody have an idea for resolve my issue please ??
Thank

TRy this may help u
CLASSY DBA: ORA-06553: PLS-213: package STANDARD not accessible

Non-blocking Server/Client is blocking...?!

First, a simple question:
Why in most example code using Selectors, when iterating over the Set returned by Selector.selectedKeys() does the currently selected SelectionKey get removed from the Iterator? I see it all the time, but since the SelectionKey is still bound to the underlying Selector it seems to not really do anything.
Now to my main problem:
I been working with 1.4 for a week now trying to implement a simple test server/client, whereby the server constantly sends out the current time to any subscribing clients, who in turn display the time to stdout. Pretty straight forward, huh?
Well, everything seems to go fine...once. The Server accepts the client connection, sends out a the current time, the client (only one for now) receives it, displays to the screen, but then both server and client block on the Selector.select() method.
If I shut down the client, the server then continues through the select() method, finding one SelectionKey, tries to write to it and throws an IOException (since the client is no more). I'm catching that exception and then removing the channel from the Selector, so that the server may continue to service requests.
When starting a second client while the first is still running causes the following sequence of events:
Server: starts up
ClientA: connects to server
Server: broadcasts the time
ClientA: displays time
// nothing else happens until...
ClientB: connects to server
Server: broadcasts the time
ClientA: displays time
ClientB: displays time
//everything blocks again...
ClientA: disconnects from server
Server: broadcasts the time
ClientB: displays time
As you can see it seems everything blocks until a client does something (connect/disconnect).
I will post code if anyone asks, but I don't want to spam the board if no one is willing to help me.
-Justin

You got it!
//   ********** SERVER **********
import java.io.IOException;
import java.net.InetSocketAddress;
import java.net.ServerSocket;
import java.net.Socket;
import java.nio.ByteBuffer;
import java.nio.channels.CancelledKeyException;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.ServerSocketChannel;
import java.nio.channels.SocketChannel;
import java.util.Date;
import java.util.Iterator;
import java.util.LinkedList;
import java.util.Set;
public class TestServer
private static final int DEFAULT_PORT = 9999;
public static void main(String[] args)
    TestServer s = new TestServer();
}//end of main(String[])
public TestServer()
    this(DEFAULT_PORT);
}// end of TestServer()
public TestServer(int port)
    InetSocketAddress addr = new InetSocketAddress(port);
    try
      Selector acceptSelector = Selector.open();
      Selector broadcastSelector = Selector.open();
      ConnectionList connections = new ConnectionList(broadcastSelector);
      Acceptor a = new Acceptor(acceptSelector, addr, connections);
      Broadcaster b = new Broadcaster(broadcastSelector, connections);
      a.start();
      b.start();
    }// end of try
    catch (Exception ex)
      ex.printStackTrace();
    }// end of catch
}// end of TestServer(int)
private static String status(Selector s)
    StringBuffer sb = new StringBuffer(100);
    sb.append("Selector: ");
    Set keys = s.keys();
    sb.append("\n\tNum Keys: ");
    sb.append(keys.size());
    Iterator iter = keys.iterator();
    int i = 0;
    while (iter.hasNext())
      try
        sb.append("\n\t[");
        sb.append(i++);
        sb.append("]:");
        SelectionKey key = (SelectionKey)iter.next();
        sb.append(" acceptable=");
        sb.append(key.isAcceptable());
        sb.append(" connectable=");
        sb.append(key.isConnectable());
        sb.append(" readable=");
        sb.append(key.isReadable());
        sb.append(" writable=");
        sb.append(key.isWritable());
      }// end of try
      catch (CancelledKeyException cke)
        sb.append("*** CANCELLED KEY");
      }// end of catch
    }// end of while
    return sb.toString();
}// end of status(Selector)
class Broadcaster extends Thread
    private final String TF = Broadcaster.class.getName();
    private int BUFFER_SIZE = 2048;
    private Selector selector_;
    private ConnectionList connections_;
    private ByteBuffer buffer_;
    public Broadcaster(Selector selector, ConnectionList connections)
      super("Broadcaster");
      selector_ = selector;
      connections_ = connections;
      buffer_ = ByteBuffer.allocateDirect(BUFFER_SIZE);
    public void run()
      while (true)
        try
          registerNewChannels();
          System.out.println("BroadcasterThread: Before select() "+status(selector_));
          System.out.println("BroadcasterThread: Selecting...");
          int keysReady = selector_.select();
          System.out.println("BroadcasterThread: After select() "+status(selector_));
          System.out.println("BroadcasterThread: "+keysReady+" ready Key(s)");
          if (keysReady > 0)
            transmit();
          }// end of if
        }// end of try
        catch (Exception ex)
          ex.printStackTrace();
          return;
        }// end of catch
      }// end of while
    protected void registerNewChannels()
    throws Exception
      SocketChannel channel = null;
      while (null != (channel = connections_.removeFirst()))
        channel.configureBlocking(false);
        channel.register(selector_, SelectionKey.OP_WRITE);
        System.out.println("BroadcasterThread: Registered connection from " + channel.socket().getInetAddress());
      }// end of while
    }// end of registerNewChannels()
    public void transmit()
    throws Exception
      Set readyKeys = selector_.selectedKeys();
      System.out.println("BroadcasterThread: Selected Keys: "+readyKeys.size());
      SelectionKey tempKey = null;
      SocketChannel tempChannel = null;
      fillBuffer();
      for (Iterator i = readyKeys.iterator(); i.hasNext(); )
        tempKey = (SelectionKey)i.next();
        tempChannel = (SocketChannel)tempKey.channel();
        if (tempKey.isWritable())
          System.out.println("BroadcasterThread: Key selected is Writable");
          try
            tempChannel.write(buffer_);
            System.out.println("BroadcasterThread: Sent message to "+tempChannel.socket().getInetAddress());
          }// end of try
          catch (IOException ioe)
            System.err.println("BroadcasterThread: Lost Connection");
            tempChannel.close();
          }// end of catch
        }// end of if
        else
          System.out.println("BroadcasterThread: Key selected is not Writable");
        }// end of else
      }// end of for
      buffer_.clear();
    }// end of transmit()
    private void fillBuffer()
      buffer_.clear();
      /* Place Date in Buffer */
      long time = System.currentTimeMillis();
      Date d = new Date(time);
      System.out.println("BroadcasterThread: Broadcasting "+d);
      String date = d.toString()+"\n";
      byte[] datebuff = date.getBytes();
      buffer_.put(datebuff);
      /* Prepare for read operations */
      buffer_.flip();
    }// end of fillBuffer()
}//end of inner class Broadcaster
class Acceptor extends Thread
    private Selector selector_;
    private ConnectionList connList_;
    private final String TF = Acceptor.class.getName();
    public Acceptor(Selector selector, InetSocketAddress address, ConnectionList connList)
      super("Acceptor");
      selector_ = selector;
      connList_ = connList;
      try
        ServerSocketChannel ssc = ServerSocketChannel.open();
        ssc.configureBlocking(false);
        ssc.socket().bind(address);
        System.out.println("AcceptorThread: Bound to " + address);
        ssc.register(selector_, SelectionKey.OP_ACCEPT);
      }// end of try
      catch (Exception ex)
        ex.printStackTrace();
      }// end of catch
    public void run()
      while (true)
        try
          System.out.println("AcceptorThread: Selecting...");
          int keysReady = selector_.select();// block till a channel is ready
          System.out.println("AcceptorThread: "+keysReady+" Keys Ready");
          if (keysReady > 0)
            acceptPendingConnections();
          }// end of if
        catch (Exception ex)
          ex.printStackTrace();
    protected void acceptPendingConnections()
    throws Exception
      Set readyKeys = selector_.selectedKeys();
      System.out.println("AcceptorThread: Selected "+readyKeys.size()+" Keys");
      for (Iterator i = readyKeys.iterator(); i.hasNext(); )
        SelectionKey key = (SelectionKey)i.next();
        i.remove();
        ServerSocketChannel readyChannel = (ServerSocketChannel)key.channel();
        SocketChannel incomingChannel = readyChannel.accept();
        System.out.println("AcceptorThread: Connection from " + incomingChannel.socket().getInetAddress());
        connList_.add(incomingChannel);
      }// end of for
    }// end of acceptPendingConnections()
}// end of inner class Acceptor
class ConnectionList
    private LinkedList list_;
    private Selector selectorToNotify_;
    public ConnectionList(Selector toNotify)
      list_ = new LinkedList();
      selectorToNotify_ = toNotify;
    }// end of ConnectionList(Selector)
    public synchronized void add(SocketChannel newlyConnectedChannel)
      list_.add(newlyConnectedChannel);
      selectorToNotify_.wakeup();
    }// end of add(SocketChannel)
    public synchronized SocketChannel removeFirst()
      SocketChannel first = null;
      if (list_.size() > 0)
        first = (SocketChannel)list_.removeFirst();
      }//end of if
      return first;
    }// end of removeFirst()
}// end of inner class ConnectionList
}// end of class TestServer
//   ********** CLIENT **********
import java.io.IOException;
import java.io.InputStreamReader;
import java.net.InetSocketAddress;
import java.nio.ByteBuffer;
import java.nio.channels.CancelledKeyException;
import java.nio.channels.Channels;
import java.nio.channels.ReadableByteChannel;
import java.nio.channels.SelectionKey;
import java.nio.channels.Selector;
import java.nio.channels.SocketChannel;
import java.nio.channels.WritableByteChannel;
import java.util.Iterator;
import java.util.Set;
public class TestClient
public static final String TF = TestClient.class.getName();
private static final String DEFAULT_SERVER_IP = "127.0.0.1";
private static final int DEFAULT_SERVER_PORT = 9999;
private InetSocketAddress serverAddr_;
private Selector connectSelector_;
private Selector readSelector_;
private WritableByteChannel outputChannel_;
private ByteBuffer receiveBuffer_;
private SocketChannel serverChannel_;
public static void main(String[] args)
    TestClient c = new TestClient();
}// end of main(String[])
public TestClient()
    this(DEFAULT_SERVER_IP, DEFAULT_SERVER_PORT);
}// end of TestClient()
public TestClient(String ip, int port)
    try
      serverAddr_ = new InetSocketAddress(ip, port);
      connectSelector_ = Selector.open();
      readSelector_ = Selector.open();
      outputChannel_ = Channels.newChannel(System.out);
      receiveBuffer_ = ByteBuffer.allocateDirect(512);
      connect();
      run();
    }// end of try
    catch (Exception ex)
      ex.printStackTrace();
    }// end of catch
}// end of TestClient(String, int)
private void connect()
throws Exception
    serverChannel_ = SocketChannel.open();
    serverChannel_.configureBlocking(false);
    serverChannel_.connect(serverAddr_);
    serverChannel_.register(connectSelector_, SelectionKey.OP_CONNECT);
    int numKeys = 0;
    while (numKeys <= 0)
      System.out.println("connect(): Selecting...");
      numKeys = connectSelector_.select();
      System.out.println("connect(): "+numKeys+" ready Key(s)");
      Set readyKeys = connectSelector_.selectedKeys();
      System.out.println("connect(): Selected Keys: "+readyKeys.size());
      if (numKeys > 0)
        SelectionKey tempKey = null;
        SocketChannel tempChannel = null;
        Iterator i = readyKeys.iterator();
        while (i.hasNext())
          tempKey = (SelectionKey)i.next();
          i.remove();
          tempChannel = (SocketChannel)tempKey.channel();
          if (tempKey.isConnectable())
            System.out.println("connect(): Key selected is Connectable");
            if (tempChannel.isConnectionPending())
              System.out.println("connect(): Connection Pending");
              tempChannel.finishConnect();
              System.out.println("connect(): Connection Completed");
            }// end of if
          }// end of if
          else
            System.out.println("connect(): Key selected is not Connectable");
          }// end of else
        }// end of while
      }// end of if
    }// end of while
}// end of connect()
private void run()
throws Exception
    serverChannel_.register(readSelector_, SelectionKey.OP_READ);
    while (true)
      System.out.println("run(): Before select() "+status(readSelector_));
      System.out.println("run(): Selecting...");
      int numKeys = readSelector_.select();
      System.out.println("run(): After select() "+status(readSelector_));
      System.out.println("run(): "+numKeys+" Ready Key(s)");
      if (numKeys > 0)
        processKeys();
      }// end of if
    }// end of while
}// end of run()
private void processKeys()
throws Exception
    Set readyKeys = readSelector_.selectedKeys();
    System.out.println("processKeys(): Selected Keys: "+readyKeys.size());
    SelectionKey tempKey = null;
    SocketChannel tempChannel = null;
    for (Iterator i = readyKeys.iterator(); i.hasNext(); )
      tempKey = (SelectionKey)i.next();
      tempChannel = (SocketChannel)tempKey.channel();
      if (tempKey.isReadable())
        System.out.println("processKeys(): Key selected is Readable");
        try
          tempChannel.read(receiveBuffer_);
          receiveBuffer_.flip();
          outputChannel_.write(receiveBuffer_);
          receiveBuffer_.clear();
        }// end of try
        catch (IOException ioe)
          System.out.println("processKeys(): Lost Connection");
          tempKey.cancel();
        }// end of catch
      }// end of if
      else
        System.out.println("processKeys(): Key selected is not Readable");
      }// end of else
    }// end of for
}// end of processKeys()
private static String status(Selector s)
    StringBuffer sb = new StringBuffer(100);
    sb.append("Selector: ");
    Set keys = s.keys();
    sb.append("\n\tNum Keys: ");
    sb.append(keys.size());
    Iterator iter = keys.iterator();
    int i = 0;
    while (iter.hasNext())
      try
        sb.append("\n\t[");
        sb.append(i++);
        sb.append("]:");
        SelectionKey key = (SelectionKey)iter.next();
        sb.append(" acceptable=");
        sb.append(key.isAcceptable());
        sb.append(" connectable=");
        sb.append(key.isConnectable());
        sb.append(" readable=");
        sb.append(key.isReadable());
        sb.append(" writable=");
        sb.append(key.isWritable());
      }// end of try
      catch (CancelledKeyException cke)
        sb.append("*** CANCELLED KEY");
      }// end of catch
    }// end of while
    return sb.toString();
}// end of status(Selector)
}// end of class TestClient

Web Server 7 Admin Server and Self-Signed certificate

Is it possible to create and install a self-signed certificate for the administration server in Sun Web Server 7. The default installation comes with a self-signed certificate but we would like to install our own certificate and not the certificate issued by "admin-ca-cert"
Message was edited by:
aar

As far as I know its not a problem. You can install your own certificate. Make sure that the certificate nick name is changed accordingly in "server-cert-nickname" in server.xml section as shown below :
<http-listener>
<name>admin-ssl-port</name>
<port>2224</port>
<server-name>alamanac.india.sun.com</server-name>
<default-virtual-server-name>admin-server</default-virtual-server-name>
<ssl>
<server-cert-nickname>Admin-Server-Cert</server-cert-nickname>
</ssl>
</http-listener>

After installing Final cut server client on OSX 10.6.8 error: Apple QuickTime or the QuickTime Java component is not installed.

After installing Final cut server client on OSX 10.6.8 error: Apple QuickTime or the QuickTime Java component is not installed.
I know this error on windows machines but cannot get a solution for OSX.

I have fixed this by installing the latest combo update

Problems starting managed server from admin console WL70 portal

I get the following exception when I try to start the managed server from admin server console. Both Admin server and managed server are on the same machine.

I get the following exception when I try to start the managed server from admin server console. Both Admin server and managed server are on the same machine.

How to stop B2B listener polling when SOA server in Admin Mode

Hi ,
I recently came across this situation like my B2B FTP listener is polling and deleting file when my SOA server is Admin Mode.
Can anyone help me to stop that polling when server is in Admin Mode ?
Thanks,
Saba

thanks for quick reply...
the "catch (IOException e) {... } " block in Server already catches this exception, and as there is no other code but printing the exception, the method run() is quitted (no need to terminate the loop). However, the thread is NOT terminated even after that. To make it sure, I added a public variable and accessed it from Handler at the end of the code, after sd.resetSock(); !!!
You told that it doesn't stop because of the way I coded it, isn't it the traditional way of setting a listener socket? If no, may be recoding the listener would be much better...

In xi server , client admin

Similar Messages

Maybe you are looking for