In XML Gateway Responsibility How to add User defined Trading Partner type.
Hi,
We have a requirements to add user defind Trading Partner Type apart from the default trading partner type.
How to do this? If any one know , kinldy let me explain it
Thanks
I looked it up in the mean time ...
The docs state that you only can use simple data type or java.util.list or AttributeList (which is a wrapper for any viewRow). So I guess you have to somehow flatten your complex data type or create a custom VO which holds it.
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcextservices.htm#CJAEHFJD
Scroll down to 11.2.3
Timo
Similar Messages
-
How to add user defined tab in the Header level of T-Code O4NM?
How to add user defined tab in the Header level of T-Code O4NM?
I tried with BADI but I cant able to find any BADI for it and also searched for screen exit too..Can you check the user exits,
OIJNOM_N and OIJTKT_N
Cheers,
Balaji -
How to add user defined functions in Menu bar of a Selection Screen?
Hi,
Can anybody please suggest me that how can I add user defined functions in the menu bar of a Selection Screen?
Regards
s@kDear Amit,
I am referring to the standard SAP program: RIEQUI20.
On the initial screen, there are 3 tabs.
Code:
SELECTION-SCREEN BEGIN OF TABBED BLOCK tab FOR 25 LINES.
SELECTION-SCREEN TAB (20) tab1 USER-COMMAND ucomm1
DEFAULT SCREEN 001.
SELECTION-SCREEN TAB (20) tab2 USER-COMMAND ucomm2
DEFAULT SCREEN 002.
SELECTION-SCREEN TAB (20) tab3 USER-COMMAND ucomm2
DEFAULT SCREEN 003.
SELECTION-SCREEN END OF BLOCK tab.
AT SELECTION-SCREEN.
CLEAR gv_okcode.
gv_okcode = sy-ucomm.
CLEAR sy-ucomm.
CASE gv_okcode.
WHEN 'IH08'.
CALL TRANSACTION 'IH08'. "Equipment Selection
WHEN 'IW29'.
CALL TRANSACTION 'IW29'. "Notification Selection
WHEN 'IW39'.
CALL TRANSACTION 'IW39'. "Order List Selection
WHEN OTHERS.
ENDCASE.
* Check date:
IF NOT datuv IS INITIAL
AND NOT datub IS INITIAL.
IF datub >= datuv.
ELSE.
MESSAGE e884(ih) WITH datuv datub.
ENDIF.
ENDIF.
IF variant IS INITIAL AND
dy_vari IS INITIAL.
PERFORM get_default_variant_f14 USING variant.
ENDIF.
PERFORM variant_existence_f14 USING variant.
IF datuv IS INITIAL.
datuv = sy-datum.
ENDIF.
IF datub IS INITIAL.
datub = sy-datum.
ENDIF.
IF sy-ucomm = 'ADDR'.
PERFORM adress_sel_f01 USING 'EQUIR'.
ENDIF.
PERFORM check_parnr_f76.
* AT SELECTION SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
STATICS: l_slset TYPE sy-slset.
*--- Set initial variant
PERFORM variant_init_f14 USING 'INST' 'INST' 'INST' 'RIEQUI20'.
IF variant IS INITIAL AND
dy_vari IS INITIAL AND
gv_variant_flag IS INITIAL.
PERFORM get_default_variant_f14 USING variant.
gv_variant_flag = 'X'.
ENDIF.
*--- Set Icon for adress-button
PERFORM set_icon_f01 USING dy_adrfl ad_icon text-ad0 text-ad1.
*--- get classification data from select option
*--- (if new variant or if called via submit or F3)
IF ( l_slset NE sy-slset ) OR
( s_comw[] IS NOT INITIAL AND gt_clsd_comw[] IS INITIAL ).
l_slset = sy-slset.
gv_class_old = dy_class.
gv_klart_old = dy_klart.
PERFORM copy_selopt_comw_f79 TABLES gt_clsd_comw s_comw.
PERFORM class_search_init_f77 USING 'EQUI'.
ENDIF.
*--- set Icon for classification
LOOP AT gt_clsd_comw TRANSPORTING NO FIELDS
WHERE atcod > '0'.
EXIT.
ENDLOOP.
IF sy-subrc IS INITIAL.
gv_comw_flag = 'X'.
ELSE.
CLEAR gv_comw_flag.
ENDIF.
PERFORM set_icon_f01 USING gv_comw_flag cl_icon text-cl0 text-cl1.
CALL METHOD cl_uid_cust=>selection_screen_output.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR variant.
PERFORM variant_inputhelp_f14 USING variant 'RIEQUI20'.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR dy_parnr.
PERFORM f4_for_parnr_f76.
AT SELECTION-SCREEN ON BLOCK clse.
IF dy_class NE gv_class_old
OR dy_klart NE gv_klart_old.
gv_class_old = dy_class.
gv_klart_old = dy_klart.
CLEAR gv_comw_flag.
REFRESH gt_clsd_comw.
REFRESH s_comw.
ENDIF.
PERFORM class_exist_f77 USING dy_klart dy_class 'DY_CLASS'.
IF sy-ucomm = 'COMW'.
CALL FUNCTION 'IHCLSD_VALUATION_POPUP'
EXPORTING
i_klart = dy_klart
i_class = dy_class
i_language = sy-langu
i_key_date = sy-datum
i_also_subclasses = dy_subcl
TABLES
ct_comw = gt_clsd_comw
EXCEPTIONS
exc_no_class = 1
exc_klart_not_allowed = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*--- fill classification data in select option
PERFORM copy_comw_selopt_f79 TABLES gt_clsd_comw s_comw.
ENDIF.
IF sy-ucomm = 'ONLI'.
sscrfields-ucomm = sy-ucomm.
ENDIF.
Regards
s@k
Edited by: siemens.a.k on Jan 15, 2010 10:10 AM -
How to add User defined return type in service interface of AppModule
HI All,
I am creating service interface using AppModule. Added custom method with Java primitives and working fine. Now i want to added custom method with return type is EMP object means user defined object. How can i do so?
Thanks in advance.I looked it up in the mean time ...
The docs state that you only can use simple data type or java.util.list or AttributeList (which is a wrapper for any viewRow). So I guess you have to somehow flatten your complex data type or create a custom VO which holds it.
http://download.oracle.com/docs/cd/E12839_01/web.1111/b31974/bcextservices.htm#CJAEHFJD
Scroll down to 11.2.3
Timo -
How to add user defined F4 help for s LDB field?
Hi,
I am using PNPCE Logical Database for a program using the standard HR report category. But I want to have my own restricted F4 help for a particular field.Is it possible to override the standard LDB search help? I tried doing it , but I am getting a syntax error .
MaheshHi Mahesh,
I don't think so that you can attach a User defined F4 help in a standard LDB.
What I would suggest is that you copy the standard LDB into Z LDB from SE80.
Then go to the selection screen of the LDB and either try and attach a F4 help by writing the code in it OR
Hide the field where you want to attach the F4 help with the keyword Exclude(you will have to check on the exact keyword).
And add the same field in the selection screen of the report and define the F4 help.
Do not forget to attach the Z LDB to your report by going to the Attributes.
Please refer to the code below for attaching a generic F4 help to a select options:
report zrich_0001 .
data: begin of ihelp occurs 0,
field type char10,
ftext type char50,
end of ihelp.
data: a_field(20) type c.
select-options s_field for a_field.
initialization.
ihelp-field = 'A'.
ihelp-ftext = 'Description A'.
append ihelp.
ihelp-field = 'B'.
ihelp-ftext = 'Description B'.
append ihelp.
ihelp-field = 'C'.
ihelp-ftext = 'Description C'.
append ihelp.
at selection-screen on value-request for s_field-low.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
retfield = 'FIELD'
dynprofield = 'S_FIELD'
dynpprog = sy-cprog
dynpnr = sy-dynnr
value_org = 'S'
tables
value_tab = ihelp.
start-of-selection.
In case you have any further clarifications,do let me know.
Regards,
Puneet Jhari. -
How to add user defined search help to data element -EXTWG ?
Dear All,
EXTWG is external material groupp field in Material Master. I am using this field to provide some external material group .But there is no search help attached to it. I want to create a search help and attach to it .I can create a search help but how to attach to a standard date element .How can i do??hi
good
go through this links ,i hope these ll help you solve your problem
http://help.sap.com/saphelp_nw2004s/helpdata/en/90/8d7307b1af11d194f600a0c929b3c3/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ee86446011d189700000e8322d00/content.htm
thanks
mrutyun^ -
User Exit to add user-defined selection critieria onto VL10G
Does anyone know how to add user-defined selection criteria onto <b>VL10G</b> - Sales and purchase order display screen? OSS note <b>524424</b> states the userexit to transfer user-defined selection criteria from the selection screen to the report but no information on how to add the selection criteria on the screen. Is that something can be done through configuration or user-exit?
Any advice or sample is greatly appreciated.I was in a hurry, I forgot to add, the user role specific selection screen assignment to VL10G is done at "delivery scenario" level
The delivery scenarios that are predefined in the system can be found under Logistics Execution -> Outbound Process -> Goods Issue for Outbound Delivery -> Outbound Delivery -> Create -> Collective Processing of Documents for Shipment.
You can make the following settings in a delivery scenario:
<b>Selection screen</b>
You can use the selection screen parameters to define the appearance of the selection screen used to select the delivery list.
There are three combinations of selection parameters available that each include a different number of tabs.
A long selection screen with no tabs
A selection screen with three tabs
A selection screen with six tabs
The selection criteria is the same on all three screens in the standard system, it is simply arranged differently.
This parameter also triggers scheduling of the report for processing the delivery list, with the same three available tab options.
Customer enhancements are also possible in the LV50R_PREFZ1 program, which should be triggered from a delivery scenario.
<b>User role</b>
In the standard system, a predefined user role is assigned to each delivery scenario. If necessary, you can copy these user roles into your own user roles, make changes as required, and then assign them to a delivery scenario of your choice.
If the user role assignment for a delivery scenario is changed in Customizing, the new settings are valid for all users that carry out this delivery scenario. -
How to add users to OSM using UserAdmin.xsd
Hi,
Can you please explain me how to add users to OSM using UserAdmin.xsd i.e xml import/export tool. I need the steps how to do that..
Thanks in Advance,
MenakaHi Razvi444,
You need to use submit data to web service in Submit button rule,where you can use above web service.
Refer http://office.microsoft.com/en-in/infopath-help/submit-form-data-to-a-web-service-HA010107048.aspx more details
Thanks -
How to map user-defined fields in XML communication on SRM site
Hi All!
We use the External sourcing scenario and we transfer requirements from ERP in SRM through XI (PurchaseRequestERPSourcingRequest_In)
We should transfer the user-defined fields, but we can not map it in SRM site.
We have enhanced enterprise service in XI, have realized BADI PUR_SE_PRERPSOURCINGRQCO_ASYN on ERP site.
I see the XML message with ours z-fields in tr. SXI_MONITOR (into SRM), but I can not find it in BBP_PDISC.
We try to use BADI BBP_SAPXML1_IN_BADI (there is no method for SC), and BADI /SAPSRM/BD_SOA_MAPPING (z-fields is empty)
Someone can tell how to map user-defined field for SC?
Thanks in advance
Evgeny IlchenkoHello, Julia
We have found solution our problem
We have enhanced standard service in a new enhancement name space and defined own enhancement elements in our namespaces. Then these enhancement elements refered to the SAP standard Enterprise Service.
But In our new interfaces were different XML namespaces
When we have correct an error we could use the next BADI
on ERP site: PUR_SE_PRERPSOURCINGRQCO_ASYN
on SRM site: /SAPSRM/BD_SOA_MAPPING
BR,
Evgeny -
How to add users from person or group field in a sharepoint list to sharepoint group
Hi,
How to add users(single or multiple) from person or group field in a sharepoint list to sharepoint group programmatically?
Any suggestions would be appreciated.
Thank you,
AA.Hello,
Use SPGroup.AddUser() method to add user in group. I have just written sample code in notepad so it is not tested:
SPSecurity.RunWithElevatedPrivileges(delegate()
using(SPSite Site = new SPSite(SPContext.Current.Site.Url))
Using(SPWeb Web = Site.OpenWeb())
SPList list = web.Lists["ListName"];
SPQuery query=new SPQuery ();
query.Query = "<Where><Eq><FieldRef Name='Title' /><Value Type='Text'>Test</Value></Eq></Where>";
SPListItemCollection items = list.GetItems(query);
if(items.Count > 0)
foreach(SPListItem item in items)
//Get USers from person or group column
SPFieldUser userField = (SPFieldUser)item.Fields.GetField("Users");
SPFieldUserValueCollection userFieldValueCollection = (SPFieldUserValueCollection)userField.GetFieldValue(item["Users"].ToString());
SPGroup spGroup = spSite.RootWeb.Groups[groupName];//group name
if (users.Count != 0)
bool isUserInGroup = false;
foreach (SPFieldUserValue user in users)
foreach (SPUser item in spGroup.Users)
string itemUserName = item.LoginName;
string UserName = user.User.LoginName;
if (itemUserName == UserName)
isUserInGroup = true;
break;
if (!isUserInGroup)
spGroup.AddUser(user.User);
The above code will query list item and then get users from "Users" column. Now it will check whetehr user is already in group not, if not then add user in group.
http://rajanijilla.blogspot.sg/2012/09/add-users-to-group-programmatically.html
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help -
How to add users to group which is present in another AD domain?
Hi,
Using JNDI how to add user as a member of group which is present in another AD domain?
For example: In AD forest test.com their are two domain a.test.com and b.test.com. Group is present in a.test.com and I want to add user present in b.test.com as a member of the group.
Any pointer around this would be great help.See the below link to get an idea on group types.
http://technet.microsoft.com/en-us/library/cc755692(v=ws.10).aspx
If the group is a universal group, you can just add members similar to local group even if user and group are in different domains. That is by setting the member attribute of the group. -
How can we add user defined fields in My Account Profile?
Hi,
When adding new field for user,user groups,my resource,organizations and request all exist in the drop down menu list but the MyAccount(In the page where we add user defined fields).
Please help me to add user defined field in MyAccount also.
Thanks in advance.Hi,
As I said before it is not that straight forward.If you will decompile tcViewProfileAction .class using any java decompiler you will find out that data in setAccountProfile method is not getting set through formmetadata.xml . If you are well verse with struts then only you can achieve what you are trying to do.You need to extend tcViewProfileAction class and also tcViewProfileForm class and then you need to modify tjspViewProfileTiles.jsp .It will not be easy job.Usually in implementation we do not change action class until its absolutely required as oracle also do not recommend that so now its between you and your client to make a call if they want to go for such customization.I won't recommend you do that.
Regards
Nitesh -
How to use user-defined packages in JAX-RPC web service
I am trying to use Object of my class located in my package in jax-rpc webservice,the code is
package supercomputer;
import Hello.*;
public class SuperImpl implements SuperIF
public String sendParam(String data)
Temp ob=new Temp();
int i=ob.get1(10000);
return data+"returned by supercomputer";
Temp is located in Hello package,I have jar the Hello package as Hello.jar and has set its classpath in targets.xml of Ant tool.
The code compiles well and service is deployed successfully,but when i try to call the service from the client its gives me following error.
[echo] Running the supercomputer.SuperClient program....
[java] java.rmi.ServerException: Missing port information
[java] at com.sun.xml.rpc.client.StreamingSender._raiseFault(StreamingSender.java:357)
[java] at com.sun.xml.rpc.client.StreamingSender._send(StreamingSender.java:228)
[java] at supercomputer.SuperIF_Stub.sendParam(SuperIF_Stub.java:60)
[java] at supercomputer.SuperClient.main(Unknown Source)
I dont know if it deploys why it gives error on client side.
Please tell how to use user-defined packages and class in jax-rpc service code ,i am not talking about passing user-defined parameters i am just talking about making objects of user defined classes in jax-rpc service.I think there is some problem in classpath.
Please guide me in doing that.
Thanks,
FarrukhFarrukh,
I don't know if your error is about a missing class from your custom package, ... what track did you followed to say that?
To use your package in the implementation of you web service, you should only follow the rules of making a web application: put your package jar in your \lib directory inside WEB-INF/ or your package classes unjared in classes (also in WEB-INF/).
As I already said, I have doubts that your error should be originated from a missing class from your package, but:
-try to see the logs (errors?) when you deploy your web service that could give a hint about the problem.
-try to see if you can access your endpoint through your browser to see if there is a online status
-display your config/WSDL file, and the steps you did to build your web service.
regards,
Pedro Salazar. -
Can I Add User Defined Tab Dialog From just like kTextFrameOptionsDialogBoss?
Can I Add User Defined Tab Dialog At Build-In kTabSelectableDialogBoss, just like kTextFrameOptionsDialogBoss?
If it is possible, How?
Pls Help Me...Impliment IUnitOfMeasure with custom units.
-
How to create user defined button in alv report
how to create user defined button in alv report
thnks in advance.Hi,
U can define it the the PF-STATUS ( Menu for ALV ).
For that u have to define it in the EVENTCAT.
form z_eventcat using p_i_eventcat type slis_t_event.
data: i_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = p_i_eventcat
exceptions
list_type_wrong = 1
others = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
clear i_event.
read table p_i_eventcat with key name = slis_ev_top_of_page into
i_event.
if sy-subrc = 0.
move 'TOP_OF_PAGE' to i_event-form.
append i_event to p_i_eventcat.
endif.
read table p_i_eventcat with key name = slis_ev_pf_status_set into i_event.
if sy-subrc = 0.
move 'SET_PF_STATUS' to i_event-form.
append i_event to p_i_eventcat.
endif.
clear i_event.
read table p_i_eventcat into i_event with key name = slis_ev_user_command .
if sy-subrc = 0.
move 'USER_COMMAND' to i_event-form.
append i_event to p_i_eventcat.
endif.
And in the DISPLAY
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = v_progname
i_callback_pf_status_set = 'SET_PF_STATUS'
i_callback_user_command = 'USER_COMMAND'
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = v_gridtitle
i_save = 'A'
is_layout = i_layout
it_fieldcat = i_fieldcat[]
it_sort = i_sortinfo
it_events = i_eventcat
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = it_final
exceptions
program_error = 1
others = 2
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
*MENU SETTINGS.
form set_pf_status using rt_extab type slis_t_extab.
set pf-status 'ALV_MENU'.
endform. "SET_PF_STATUS
endform. " Z_EVENTCAT
Now double click on ALV MENU nad u can create a button in the application bar.
Regards,
Pritha.
Maybe you are looking for
-
How do you create a flash in game popup on the same frame?
How do you create a flash in game popup on the same frame? I need to make a popup in flash on the same frame. Basiclly like you reach the frame and randomly (I know how to do random stuff) a popup might appear saying like you got a prize; and I want
-
Can't send text message from Iphone 4 CDMA, can't send text message from Iphone 4 CDMA
Hi, I have just got a Iphone 4, CDMA version. I am abale to receive the text message but not able to send one. Please advise any settings that will enable to send the text msg. Note: The iphone 4 was Verizon, but I had jailbreak it to different carri
-
Reading a text file and connecting two server
Hi, I am newbie at java and I have two question , asume you have two server and a client. every server reads its own text file and the client connect both of them and read output data, and counts number of words. you must use socket programming to co
-
Is there an update installer application for 3rd party software?
I want to make sure all my third party apps are updated before installing Snow Leopard. I was wondering if there is such a thing as an application that will check your computer for software and firmware updates? I can do it on my own by checking eac
-
URGENT:: errors with WLS Portal GA in Workshop
Hi, I just installed the GA version of WebLogic Platform and tried to create a Portal using Workshop. I selected a "Portal Application" and then a "Portal Web Project". The WebLogic console (stdout) shows many errors. It is not able to find the some