IN YOUCAM IT IS DISPLAYING WARNING THAT" NO WEBCAM IS DETECED. TRY TO PLUG IN THE WEBCAM .

PLEASE HELP ME

Hello @TIKI_2512,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how Youcam is displaying an error message, and to disconnect the webcam. I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
How Do I Find My Model Number or Product Number?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
Cheers!
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Similar Messages

HT1386 When I try to sync my iphone with itunes, it tells me in a warning that I don't have enough memory and yet the status bar on the bottom says I do and I know that I have enough memory.What's as

When I try to sync my iphone with itunes, it tells me a warning that I don't have enough memory and yet the status bar at the bottom says that I do and I know that I have enough memory. What's the problem? It happens with the ipods and ipad as well!!!

The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.

Photomatix plug-in's HDR merged image has suddenly stopped showing up as part of the stack, yet when I repeat the merge it warns that these images are already merged. I have the merged image labeled with a HDR suffix.

Photomatix plug-in's HDR merged image has suddenly stopped showing up as part of the stack, yet when I repeat the merge it warns that these images are already merged. I have the merged image labeled with a HDR suffix. Worked fine until now. Thanks

I am not sure what's happening with IE9 (no live site) but I had real problems viewing your code in Live View - until I removed the HTML comment marked below. Basically your site was viewable in Design View but as soon a I hit Live view, it disappeared - much like IE9. See if removing the comment solves your issue.
<style type="text/css">
<!-- /*Remove this */
body {
    margin: 0;
    padding: 0;
    color: #000;
    background:url(Images/websitebackgroundhomee.jpg) repeat scroll 0 0;
    font-family: David;
    font-size: 15px;
    height:100%;

I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated.

I downloaded a trial of photoshop. It runs for a minute or so, then a message displays saying that photoshop has stopped. No error codes, just the message. I have exhausted the "try this" stuff that I can find. Any other ideas would be appreciated. I would also like to know what some alternative applications might be. This trial does not give me confidence in Adobe's product.

I saw a similar question deeper into the forum right after I posted. I followed the fix steps and it took care of the problem.
Thanks for getting back to me. I am good to go.

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my p

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work. The message appears "building criteria" and I get an endless loop on the lower left panel. How do I correct?

You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.

My MacBook Air (OS 10.8.4) does not connect to projectors consistently using a VGA/Thunderbolt connetor. The Monitors/detect displays box that I am used to never appears. Intermittently the "arrangement" window appears in the Displays System Preferences

My previous MacBook Air running an older operating system synced up just fine with these same projectors using the same minidisplay to vga adapter. My new computer has Airplay on it, and Airplay shows up on my menu bar on the new laptop where the displays icon used to appear. I cannot get the displays icon to display (even when I turn Airplay mirroring off). It used to show up on the menu bar and if I had projector issues I hit "detect displays" and it resolved. None of that appears to be available with the new operating system and Airplay on. I am not sure why.

My previous MacBook Air running an older operating system synced up just fine with these same projectors using the same minidisplay to vga adapter. My new computer has Airplay on it, and Airplay shows up on my menu bar on the new laptop where the displays icon used to appear. I cannot get the displays icon to display (even when I turn Airplay mirroring off). It used to show up on the menu bar and if I had projector issues I hit "detect displays" and it resolved. None of that appears to be available with the new operating system and Airplay on. I am not sure why.

My old computer crashed completly. I have a new computer now. It is a HP with internet 8 on it. I downloaded itunes but can not sync itunes to the new computer. Every time I try I get a warning that if i proceed then all my stuff on the phone will erased.

I recently bought a new computer becouse my old computer crashed. Now I can not sync my itunes account. I get an error when I try. It says that itunes will erase my phone content and replace with what is on the phone. I do not want to lose all my stuff so what do I do?

This is how it works.
Iphone will sync with one computer at a time. Syncing to another will erase the current content.
Copy everything from your backup copy of your old computer to your new one.

Hi , I have just started using adobe illustrator cs5 and I get a warning that I do not have enough ram to complete the task. How do i solve this?

The System overview shows I have 4gb of ram but in the L2 cache 3mb are used. ??
any ideas
Thanks

Hello,
I find 4GB barely enough for the OS itself, you can upgrade to as much as 16 GB of RAM...
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=385&type=Memory
http://eshop.macsales.com/installvideos/imac_late_2009_mem/

Fire fox displays web fonts correctly but when i try to print it the webfonts are not identified by the firefox so in print preview it doesnot show web fonts

i am using web fonts in my web page, this web fonts are for displaying bar-code, they seem to work properly when seen while browsing but when i try to print that displayed bar-code it is unable to recognize the web fonts.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

HT1338 How do I make more room on my startup disc? I keep getting a warning that it is full.

How do I make more room on my startup disc? I keep getting a warning that it's full.

Bernie007 wrote:
How do I make more room on my startup disc? I keep getting a warning that it's full.
Try downloading omnidiscsweeper
http://www.omnigroup.com/products/omnidisksweeper/
and check to see that are no large folders of files that you do not know about on your computer. Normally it will be Pics, Music or Movies.
If everyfile is required then you may well have to physically back a lot of it up to an external drive. You need a minimum of 15% free disc space to operate at a reasonable rate.
Pete

Warning that another computer is using my ip address

What do I do if I receive a warning that another device is using my ip address on the macbook air?

     Simple solution would be to renew your IP address and you might get issued a new (different) one.
     However, in some scenarios this will not work as the conflicting machine could have that address statically assigned and the dhcp server could have no idea of this.
     Does this happen at your home? school? work? If its at home, check all the other devices on your network and check to see if any of them have a static. If at school or work contact the network admin and let them know - personally I'd be a little upset if someone was using an unauthorized static on a network I was responsible for.

IPod displays a picture of a power adapter and wall plug & won't go away!

Okay, I am trying to update a mini ipod for my neice. I originally have the 20GB ipod. Hers however is the 1.1 mini ipod... and I think it was formated for windows on a pc, but I didn't know this until after I reset it on my mac.
I reset it to the factory setting, but it said I needed to plug it into the wall jack to complete the software settings... which is cool and fine. So i did by USB, but now all I get is this iPod displays a picture of a power adapter and wall plug. The icon will not go away and neither will anything change. I can't turn it off and if I try to bring up anything, all I get is the apple and then this icon, over and over again.
Any help would be greatly appreciated. Thanks!
Ipod Mini Mac OS X (10.3.9) I think this mini was formated for a PC, does that matter?

Actually I did do what is it said, and it continued to blink the power adapter and wall plug picture, while I had it plugged into the wall socket. So that is why I posted this question.
So someone else actually replied to my question and said that I have to plug it into my car ac adapter and it would finish rebooting... which it did.
Thanks for the tips. I'm not computer iliterate, I'm just learning about the ipod.
Ipod Mini Mac OS X (10.3.9)

Display warning if 2 names are identical

Can someone please help me with this. My array program is below. I need to edit it to make a message display 'This password has been chosen' if to names are identical. I have played around with it and I can get the warning to appear but all the time. The code below makes the warning cycle continuously down the page. If anyone could help I would be very gratefull.
import java.io.*;
public class Arraylist
public static void main(String[] args)
String members[] = {"Fred","Brenda","John"};
System.out.println("full member: "+members[0]);
while (members==members)
System.out.println("this password has been chosen");

I'm going to assume for a moment that this is a serious question and not a troll.
It should be obvious that (members==members) is going to return true always.
At what point are you checking to see if there is a duplicate? Is it only in the original array, or are you adding items later?
In either case, some classes that should help you are:
HashSet (or anything implementing the Set interface)
HashMap (or anything implementing the Map interface)
both are found in java.util.
Hope this helps.

How can i display warning messages in user exit EXIT_SAPLMGMU_001 (MM02)

Hi all,
while modifying the material master using MM02, i have added new conditions to display messages in user exit EXIT_SPALMGMU_001.
But using this user exit i am not able to display warning messages.
Can you please help me with this?
Sample code which i have included in exit :
SELECT SINGLE mstav FROM mara
INTO w_mstav
WHERE matnr = wmara-matnr.
IF wmara-mstav NE w_mstav.
IF wmara-mstdv NE sy-datum.
wmara-mstdv = sy-datum.
MESSAGE w177(z03_mm) WITH text-s04 text-s21.
ENDIF.
ENDIF.
Thank you all in advance.

As written in the SAP documentation of the Enhancement , you can only raise error message using a
MESSAGE .. RAISING APPLICATION_ERROR.
You could manage the "warning" yourself, sending an error first time and keeping a trace of the check in some STATICS variable, and not raising the error again if data input remains unchanged between two call of the include.
<i>----
EXIT_SAPLMGMU_001
Where Is the Customer Exit - EXIT_SAPLMGMU_001 called?
The customer exit is in function module MATERIAL_UPDATE_ALL. The
function module checks the data for errors (logical relationships,
foreign keys, fixed domain values, and so on) when the material master
is updated.
Use
o New fields
You can make checks possible for new fields of your own. These
checks must be identical to the checks that you carry out for your
new fields in online maintenance.
o Existing fields
For existing fields, you can extend and intensify the checks.
You can also change data for descriptions and general material data
(MARA). For example, the descriptions can be generated from attributes
of the material.
Limitations
You cannot bypass existing checks.
Interface to Application
The respective data of the current logical transaction is contained in
the structures, for example, in structure WMARA for MARA. Nonrelevant
structures are transferred with their initial values.
General material data that can be changed (CMARA) has the structure
MARU. This MARA view contains fewer internal fields than MARA itself. If
WMARA is filled, CMARA is also filled when accessed.
The customer exit contains the exception APPLICATION_ERROR for your
self-defined error situations.
Using the language element MESSAGE .. RAISING APPLICATION_ERROR, you can
terminate the current (logical) transaction and display your message in
the log. </i>
Regards

Java applet manifest - having Trusted-Library=true attribute still shows display warning in JRE 1.7 u45

As mentioned in link http://download.oracle.com/javase/6/docs/technotes/guides/jweb/mixed_code.html For applications and applets that are designed to allow unsigned components, the Trusted-Library attribute should be used. No warning dialog will be displayed and an application or applet may load jar files containing untrusted classes or resources.
But with the the latest jre 1.7 u45 we are getting security warning prompts. It is recommednded that newer Caller-Allowable-Codebase attribute should be used to handle the warning prompt. However, if I used newer one it will break the in updated 40 , and if I am using both display prompt will continue to come in jre 1.7 u45
Is there any solution to above problem? How can we support backward compatibility? In what sequence can we use the attribute such that both jre 1.7 u40 and 45 should stop display warning message?

Thank you for the quick reply.
However, I don't get the point. Do you say, a trusted library cannot call an untrusted (= unsigned) library other than by reflection?
Then how do I use the unsigned library from my applet? The problem is mixed code (= signed and unsigned jars), there should be a way to use the unsigned jars of 3rd party contributions. For example, I would have an applet and would like to create a PDF using itext. The itext jar is unsigned, how can I use it? The same is true for the apache libraries like commons etc.
From http://download.oracle.com/javase/6/docs/technotes/guides/jweb/mixed_code.html, I understood, that the applet jar (= the jar, that contains the class inheriting from Applet and referred to in the "code" attribute of the applet tag), should be signed and have a manifest with attribute "Trusted-Library: true" set. Then it could use classes from unsigned jars. There may be some difficulties when using reflection (Class.forName, Resource.getBundle etc.), but in general it could use the untrusted libraries without change. The explanation of the new classloader hierarchy in that document did not match (the unsigned jars have been described there as being loaded by the applet classloader, which would be the child of the new trusted library class loader. So the classes of the trusted library would not see the untrusted classes as to my understanding) but the rest of the description pointed to that.
Did I understand this incorrectly? Then how can I use the unsigned libraries? What I need is a simple, but complete example that is working, including the applet tag, two jars, one unsigned and one signed and the code of the source and the manifests of these jars. Can you scetch such an example or do you know of some?
Anyway, thank you again for the response.
Edited by: 883189 on Sep 5, 2011 2:17 AM

IN YOUCAM IT IS DISPLAYING WARNING THAT" NO WEBCAM IS DETECED. TRY TO PLUG IN THE WEBCAM .

Similar Messages

Maybe you are looking for