Inability to access Target Disc
Have a new iMac g5 with Tiger. Want to copy over files from older PowerMac running 9.1, using firewire Target Disc mode. Didn't work. Tried reverse (using iMacG5 as target disc) and it corrupted that disc. With Apple's help, erased/reformatted iMac G5 disc. Then found both computers have to be running OSX for this to work. Installed OSX3.4 onto old PowerMac G4, and tried using it as target disc. Image mounted as orange firewire icon on iMac G5 desktop, but when I double clicked (or later tried command-O) all I got was spinninmg disc for about an hour, so did a forced shutdown on both computers, as nothing else seemd able to do that.
How do I get the firewire disc image to open so I can transfer files?
Welcome to Apple Discussions!
Which PowerMac G4 do you have?
http://docs.info.apple.com/article.html?artnum=58418
Similar Messages
-
Using target disc mode to access a broken laptop
I'm using a 1.33 15" PB with 10.3.9
and broken early 12" still on 10.2.8
During an attempted repair of the 12" DC in jack, also replacing the broken CD/DVD Drive with a SD using a replacement lower case and screen that still had the screen control? and dc in jack in it, broke the connection for the screen control on the 12" logic board, Thought I had it effectively soldered back on, but appears not. Screen won't light up, But appears to powering up, get the dong and hard drive spins up.
Was told to connect the two units together with firewire and use the Target disc mode to access the data on the broken machine. (which normally needs to be logged into on start up normally, but can't, not being able see the screen)
With the 12" powered up, I restarted the 15" holding the "T" key down and get a screen that has a Yellow "Y" like icon that moves around the screen, "O" with 3 extensions off it, 1 solid and other 2 dashes.
After a minute or so, shut it down, now sure if it was eventually going to work or should have waited longer. or done something else?, Was expecting the normal desktop to show up with some kind of icon for the other computer, then maybe figure out from there how to transfer the data to the new unit.
Have no idea what to do next or what the problem might be, if I'm doing something wrong, or have to change settings somewhere on the 15" before doing it?
This a used unit, with a fresh 10.3 install and upgraded to 10.3.9 Haven't even gone into the system preferences yet and don't know what most of it's for anyway, (Just did the initial set up) or if the 12" has hardware problems still, etc,
Have a USB external HD adapter and can take the HD out of the 12" instead and see If that'll work? But still not sure if I'm going to encounter something else again that's not easy to figure out in order to get the data off it. Transfer it to the 15" or be able to use it on the external drive
Thanks in advance, And hopefully simple instructions....Thanks, That eventually worked, Oddly produced an open OS 9 Virtual PC 3 Application folder on the 15" desktop that I installed on the 12" long ago and never used before the external drive icon as I named it for the 12" showed up
Clicking on the external hard drive icon had it open the 15" system folder? Hard drive content window (the os 10.3.9 having a different format than what I'm used to seeing)
All the familiar folders from the 12" were there, but the couple times I tried to open one of them, the external hard drive icon and related entire open desktop window, (Hard drive content) disappeared and produced an error message to properly eject the item, But there nothing there to eject anymore, subsequent attempts to get it back failing, But eventually got it up again.
But can't open the 12" mail application to retrieve my old emails and can't seem to find the file to rebuild the 15" mailbox into what I had in my 12" or save/find those emails, but not sure where to look, must be files somewhere for them.
Every time I click on the mail app in the 12" file, it pops down into application bar and disappears. Tried dragging it into the 15"s icon and that not doing anything either. Also dragging it into the app tool bar and trying to open it and it doing nothing, Presume unable to in the later os.
Will this still happen if I take the HD out? and connect with my USB adapter? Need to boot from this? (have no idea how to do that)
Any suggestions on where to find my old mailbox files? Tried opening a number of odd files in the system folder and found nothing in some of them.
I'm presuming this isn't working because it's still an OS X 10.2.8 application But all the other files appear to still be there and think I found the mail before at one time.
Also got an error in iphoto, Can't open it because it needs to be opened in the later version. But found the 12" iphoto file and dragged it to the desktop and took a bit to transfer, so presume I should move it or specific files in it into the 15" iphoto 15" file to retreive the photo's. (and also moved my camera app to reinstall) Same with my itunes which only had a few cd's in it.
The 12" desktop also took a bit to find, but moved that file to the 15" desk top and those files took a little while to transfer. Some of those are MS Word files so also moved the MS Word app and expect to need to reinstall it before trying to open any of those word doc's.
Still wonder why it produced that os 9 as an open folder which was a virtual pc 3 program I never got around to using, -
Target Disc Mode doesn't Work - what do I do?
So my old Apple (2004 G4 Powerbook) went out on me. It will start it up but it won't advance past the start up screen. So I bought a new Apple. I have followed the instructions on how to transfer data from the old one to the new one using the Target Disc Mode, and the Migration Assistant. I can start my old one up in Target Disc Mode (the FireWire icon shows up on the screen). However, my new computer won't recognize it. In the migration mode, all it says is "searching for disc". It doesn't show up on my desktop either (my understanding that it should when in that mode). Any ideas of what I can do? I really want to be able to transfer that data over...Thanks in advance!
Hi and Welcome to Apple Discussions ...
Sounds like the drive in the PBookG4 has failed but I never say die. If by chance you use Airport and have a wireless network set up, you might be able to access the PBook drive with the new Mac. On the new Mac, make sure Airport is turned on. Open a Finder window, select Network in the Sidebar on the left and then click Network.
On the PBookG4. You say it starts up but not past the start up screen. Have you tried using the restore disk that came with the PBook and using Disk Utility to possibly repair the drive? If not, and you have the restore disk, post back and I'll give you the instructions to do this.
Carolyn
Message was edited by: Carolyn Samit -
Target Disc Mode + Disc Mounting issues
I hope this is a suitable forum for this topic.
Anyway, I recently posted a question concerning the connection of 2 Mac's (one disabled), in order to save the contents of the disabled MBP.
I have since obtained a 6 pin to 9 pin cable (to connect my MB's FireWire 400 to MBP's Firewire 800), and have tried to access the MBPs hdd via Firewire/Target Disc Mode.
I have no problems booting the MBP to Target D. Mode, but the disc will not mount on my Macbook.
The main problem that I have noticed is the S.M.A.R.T status on the MBP's internal drive is saying "not supported". From what I have read this is a common status message for 3rd-party installed harddrives, but my internal is the factory installed drive.
Im pretty sure I know the answer: The drive is dead, ie. get a new one. But I just thought I would ask the you guys if there is some way to "fix" the SMART status so that it will mount.
Also, (and this is what makes me 99.9% sure the drive is dead) when linking the 2 computers in Target Disc Mode, the Leopard Install disc that was in the optical drive of the MBP was read on my Macbook, so I know the Firewire cable/both ports are in working order.
Hope this makes sense, as I tend to ramble!
Thanks for any help or suggestions,
MattIf the drive does not mount and is otherwise inaccessible then booting into Target Disk Mode isn't going to help you. A drive's SMART status is not reported over FireWire or USB. The SMART status is only reported for the internal drive, locally. SMART has nothing to do with whether the drive is working or not. It is merely an information report.
All that you can hope to accomplish might be to purchase recovery software, boot the computer from the recovery software DVD, and hope something is recoverable. Or you can send the drive to one of the many disk recovery businesses to see if anything can be recovered from the dead drive.
File Recovery Software
Data Rescue
File Salvage
TechTool Pro.
The first two have demos you can download. The demo will indicate what if anything is recoverable, but until you pay for the software and get a serial number you cannot recover anything. You would also need the bootable DVD. This will not work if the drive's motor is dead or if the drive's interface board is no longer functioning. Both of these render the drive inaccessible. In this case recovery would have to be through a data recovery service like Drive Savers.
Each of the preceding comes on bootable CD.
Message was edited by: Kappy -
Transferring Mail using Target Disc Mode
Please I am begging for someone to help me ! I have an older Macbook Pro , that is running , or was running Mavericks 10.9.2. Awhile ago it quit booting and a reinstal using recovery was unsuccessful. Using disk utility i was able to determine the drive is fine and it is in fact an OS X issue. It was time to buy a new computer anyways , so I did. Now connecting the two via fireware using Target Disc Mode I am able to find and transfer all that I have wanted , except for my previous mail folders.
when i look through the folders on the drive of the computer that wont boot , there are two library folders listed. One is all on its own , and one is a sub folder inside the system folder. The only mail folder i can find in either of those folders only carrys previous stationary information. I care not about the stationary! There is no library folder listed inside of my user folder , which makes me wonder , can i access my user library on a dead macbook using target disc mode. Or can i not get access to it this way.
any help is appreciated!I found the answer In case anyone else is looking .....
https://discussions.apple.com/thread/3686247 -
Migration Assistant & Target Disc: Deleted User
It appears that the Target disc I migrated to a G4 from an eMac the user was deleted and now no user has permissions to access the library. The apps won't open and it boots into basic mode. Real strange.
Can anyone help.
Thanks.
Nathan.jeevescat wrote:
Thanks for your reply.
The migration assistant behaved as usual, I've used it countless times, it came up with the list of accounts, in this instant there was only the one, and all the boxes were ticked to transfer all apps, files etc and all data from this account.
At the end of the transfer the computer restarted, but instead of going straight to the desktop, it ran through the account creation procedure.
All data and apps outside of the user folder have been copied but nothing in the user folder. Thats when I noticed that connecting to the old imac in TDM does not allow access to the data in the user folder,
please clarify that. do you mean that you don't have permissions to open that folder? or do you mean something else?
their is only one account which it is set to automatically log into. There are no passwords or security, file vault is not on and all sharing is enabled, access is fine over a normal network connection.
Any suggestions? -
Using thunderbolt to firewire adapter for target disc mode
I need to transfer several GB of data from a 2011 iMac running OS 10.6 to a new Mac Mini running OS 10.9. Can I connect the older iMac to the newer Mini with a Thunderbolt to Firewire adapter and boot the iMac into Target Disc Mode and transfer the data to the new Mac Mini? I've used TDM with two Firewire machines, but not with a newer Thunderbolt to Firewire Machine using an adapter.
Thanks for any input.
--SLHi Salnews,
I've done quite a bit of research on this, as this is what I plan to do (only from a MBP on 10.9, but I don't think your situation would be any different) and everything I've read says the answer is yes.
EDIT: I see you're on 10.6.7. You should update to 10.6.8 first. -
Can I connect a macbook pro and an ibook g4 via ethernet with ibook in target disc mode?
Well, that's the question, really. I just bought a refurb macbook pro as an upgrade for my sister's elderly ibook - which has been a great computer, but which can't run any system newer than Tiger, and which has an extremely crowded hard drive. We began setting up the new computer last night, and got to where we were instructed to use migration assitant to transfer files from the old machine. This is where things fell apart.
1. Although both machines were on my sister's wireless network, the macbook pro did not see the ibook.
2. When we tried to connect the machines via firewire, we had a new problem - our particular macbook pro does not have a firewire 400 port. Same problem when we thought of connecting my sister's extermal verbatim drive. The macbook pro recognized the drive when we connected via USB, but, after asking if we wanted to use Verbatim for Time Machine, it didn't seem to see it when we answered "Not now".
I have ordered an adapter for our firewire cable, but, in the meantime, I have an ethernet cable at home which I used to transfer data from my older iMac G3 to an eMac. Can I use this cable while putting my sister's ibook into target disc mode, or must I wait for the connector? It is VERY frustrating having such a hard time moving information from one Mac to another. I've been a Mac fan (and evangelist) for years because Macs are generally easy and reliable. But now we're stuck.
I've been reading the boards and understand that target disc mode is the way to go, since we can't use migration assitant to move files between an Intel machine and a PPC. The new macbook pro is running Lion, while the old iBook is running Tiger 10.4.11. Neither of us has any experience with Lion, though we've both used Macs for many years.
TIA!Thanks, Niel! As it turned out, I had a LaCie rugged drive at my place which had both Firewire 400 and Firewire 800 connections and cables. So I hooked it up to the old iBook, pulled my sister's stuff onto it as instructed in the ppc to intel thread, and then hooked it up to the Macbook Pro. Problem solved! - almost. We did have two issues:
1. My sister has a lot of music - more than 12 gigs were on the iBook's hard drive, but only about 6 made it onto the Macbook Pro. Why is that? I also got a message, when I was trying to move the music folder from the old library onto the new one, that OS X needed this folder and it couldn't be modified. Again, why is that? How, then, do you move files from a PPC to a machine running Lion? Again, a lot of her music files did make it over, but not all of them.
2. All her photos did seem to come over - in duplicate, maybe even in triplicate. That is so annoying! The same thing happened to me when I was migrating between my old eMac G4 and my iMac G5. Why on earth does iPhoto do this, and how can we make it stop?!
But we did manage to get a lot of her stuff onto the new machine. When we get the adapter, she'll be able to add the files that are on the Verbatim drive. You've been very helpful! -
HT1661 How can I restart my mac book pro 11 inches when it's on target disc mode
How can I restart my mac book pro 11 inches when it's on target disc mode
Even if you could open Disk Utility you can't reformat a disk while you are booted from it. You will have to use the install CD. Ring the Apple Online Store at the number given at bottom left of this page and give them the serial number of your Mac. You should be able to get the Snow Leopard install disks for a nominal fee.
-
Installing tiger on an ibook w/o dvd, but using target disc mode?
so here is the problem. i bought tiger for my ibook (g3 500mhz 312 mb airport cd drive...) so i found out the hard way that i can not install tiger dvd on my ibook (it has a cd drive.) so i was thinking and booted it up in target disc mode on my g4 tower running 10.2.8 the hard drive came up on the g4 and i installed sucessfully tiger on to the ibook! i was really excited that it worked. (i really didn;t want to order the cd set from apple)
so i went to start and download updates and it didn't connect. so i went to configure the airport and had a ton of problems. it just won't! airport will not recgonize any networks, and i have done it all to configure it. the ibook sees the card too!
so i took the card out of the ibook and installe dit in tehg4 tower and bravo it works just fine, so the problem is not the card at all.
i then took the ibiik to firsttech (an apple store) and they booted it up in network mode and the card worked just fine! they think that because i installed tiger fro a computer that was not running an airport network that it did not install that part of the software. this i do not believe becaust all of the airport stuff is there to configure, the problem is it just won't.
so to make things more interesting the screen will freeze. and after that when i reboot the ibook the screen is dead. and it stays dead for a while so this is just a pain. i try to reboot it in target disc mode but the icon does not show up on the host computer. i can run system profiler and the g4 will see the ibook as a firewire device in target disc mode, but i just can't see it on the desktop. i can hear the hard drive running, and i get the chime so i know it is on.
so i know that the problem is probably tiger as i know that there have some problems with it. but i just don't get it. b4 i reinstall 10.2 can anyone give me any help fixing tiger?
THANKS!
SEAN
g4 tower Mac OS X (10.4.8) ibook! g3 too
g4 tower Mac OS X (10.4.8) ibook! g3 tooHi sean,
first of all: WELCOME TO THE DISCUSSIONS!
You probably did the target-disk install the wrong way round. If you booted the G4 from the install DVD and from there installed Tiger to the G3 iBook you have installed the G4 hardware drivers which are not compatible with the iBook.
You have to do it this way:
Insert the install DVD into the G4. Start the G4 into target disk mode by holding down the t-key during boot. Connect the G4 to the iBook using a firewire cable. Now boot the iBook while holding down the option-key. This will bring you into the boot manager where you can select the install DVD as boot-volume.
Once the installer has started perform an Archive&Install to the iBook hard disk. This should solve your problem.
Remember: Repair permissions before and after an update!
If this answered your question please consider granting some stars: Why reward points? -
Core i3 mac not seeing power pc g4 imac in target disc mode
I'm trying to migrate my set up from a power pc g4 imac running a 10.4.11 to a core i3 imac. All the system software and firmware on the g4 imac is upto date and the mac will enter target disc mode. The macs are connected using a brand new 6 pin to 9 pin firewire cable. The iMac core i3 will not see the other mac in target disc mode. When trying the same thing using the migration assistant, migration assistant just hangs with the 'waiting for your other mac to restart'.
I'd really appreciate any help to fix the issue.Is this the newest model with Thunderbolt? If so then see Thunderbolt 10.6 Help: Transferring files between two computers using Target Disk Mode and Intel-based Mac may become unresponsive in target disk mode.
Have you checked to be sure the drive in the G4 is configured as the Master? If it isn't, then it cannot be seen in TDM. -
using thunderbolt cable target disc mode shows the firewire icon and the thunderbolt icon but the drive never shows on the second computer. how do i get only the thunderbolt icon?
using thunderbolt cable target disc mode shows the firewire icon and the thunderbolt icon but the drive never shows on the second computer. how do i get only the thunderbolt icon?
-
Target Disc Mode via Firewire PC Card
I am unable to boot my PowerBook Ti in firewire disc mode as my firewire port died. Since i've been using a PC card with 3 firewire ports on it. When attempting to reboot in firewire disc mode with another mac it just restarts.
I surmise the issue lies in the boot order? Does the PC card load later than when an internal firewire port would become available?
Thanks!Hello Nathan,
I believe the reason you can not use firewire disc mode is because you need to use the built-in firewire ports for target disc mode to work. The device information for the built-in firewire ports are loaded with Open Firmware as the computer starts up. I'm guessing that the PCMCIA card slot device information isn't loaded until after Open Firmware has loaded, thus making it unavailable for firewire target disc mode.
Hope this helps!
Hi O,
In my experience, the superdrives are reliable and i wouldn't worry about it breaking. That being said, all drives will die eventually, but the superdrives seem to be well built and usually last a long time. Replacing an optical drive on a 12" AL powerbook is actually quite a pain. You basically have to remove everything, including the logic board, to replace it. I wouldn't recommend replacing it yourself unless you have the proper experience and tools required.
Hope this helps!
Brian Cometa (ACHDS)
www.briancometa.com -
When connecting two eMacs (eMac "A" & eMac "B") together via Firewire I am able to mount eMac "A" on the desktop of eMac "B". But, when I open the mounted eMac "A" hard drive, I see the items that are on eMac "B". It is like I am opening eMac "B". I tried restarting both machines, changing the names of the computers, and tried reversing which eMac I would try to connect to, all of which did not allow me to view the items on the mounted machine.
Anyone have a similar problem or advice on what to try?Robert,
Try this, first boot up the eMac you wish to put into Firewire Target Disc Mode normally(that is, let it boot into OS X). Right click(control-click) the Hard Drive icon on the desktop and give it a color. Do this for a couple of folders inside the HD also(reason is, it helps distinguish the two drives).
Now, reboot that mac and hold down the T key(do not have the macs connected). Once booted into Firewire Target Disk Mode, connect it to the other eMac(it should already be on). Does the drive mount on the desktop? Does it have the color you gave it? Do the folders inside it have their colors?
Grant -
Firewire Target Disc mode failure
Does anyone know why my 400Mhz Ti Powerbook refuses to boot into target firewire mode? - It just shuts itself down...
I am trying to exchange my old files from the G4 Ti Powerbook (running 10.3 to my iMac (iSight) G5 2.1Ghz running 10.4.3.
I thought 'easy' - connect via firewire, start the powerbook up in Target Disc Mode.. so I restart - holding T down - it starts to start up then you just hear it all shut down after about 5-10 seconds.Hi, Nick. You can't put a Powerbook into Target Disk Mode by connecting to another computer while it's running and then using the Restart command. It has to be in a cold shutdown when you make the connection.
This article describes the whole procedure and tells which Mac models it can be used with.
Maybe you are looking for
-
Textbox shows xml text in working file but now when loaded into another SWF
Hi all, I have downloaded an xml gallery (as2) as we needed one for an old as2 file. Now I mostly use as3 but thought as I only needed to tweak it there would be no probs. Of course, it rarely works out that way. The problem is, text loaded from the
-
Data Source and ConnectionPool
This is a query for information about javax.sq.ConnectionPool and javax.sql.DataSource Does datasource represent one connection to a database? - if you register it through JNDI does this just register the object and every time you call it does it ins
-
When will the new Macbook Air be available in Shanghai, China?
The website says that it is still going through some kind of regulations approval. Will Apple Stores have it in stock earlier?
-
How to include the SharePoint engine in my Office 365 Enterprise E3?
I signed up for the Office 365 Enterprise E3 wanting to create a MS Access Web application, apparently MS Access requires SharePoint, I do have the SharePoint Designer however it requires the SharePoint Foundation or Server, netierh of which can run
-
Ok aloha I was running along smoothly in iTunes after I moved all my music from my iTunes library from my powerbook and in the middle of a song about 5 to 10 mins after this the system crashed to a Kernal panic screen. I cannot start up when I restar