Inactivating Countries from being selected in Sales and Marketing Online

When our users are adding new addresses to Organisations in Sales Online and Marketing Online (and Receivables); they get presented with a 'massive' list of countries to select from in the Country Dropdown including places like 'Aland Islands' and 'Obsolete see CS Territory' ..a whole bunch of places we will never use.
Can you tell me how to inactivate/end date these countries so they will no longer appear.
Also, is there any way to put certain countries at the top of the list? Of course we have our default country but would also like to 'order' some countries to the top.

What about this - a colleague of mine pointed me here:
System Administrator Responsibility -> Install -> Territories.
I have managed to update the name of some countries and Obsolete them. But Obsoleting keeps the country in the list -- are there any other options?

Similar Messages

FB60, How to exclude a G/L account from being selected ?

This is a continuation of a previous thread that was closed by accident!!
The original question hasnu2019t been answered yet.
Question
=======
I am in need to EXCLUDE a specific G/L account from being selected, from the drop down list, when executing FB60 (Enter Vendor Invoice) to create a new vendor invoice ?
1) Is this doable ?
2) Could this be done programmatically (ABAP team) ?
3) Could this be done at Security Role level (Basis & Security ABAP team) by using the field BRGRU of the F_BKPF_BES Authorization Object ?
I have received so far very useful remarks from Paul01, Mauri, SAPFICO, Mohammed Zia, and Sudhaker Gogula.
THANK YOU ALL!
Here are my answers to each one:
To Mauri:
========
YES, we define the authorization Group via FS00 --> Control data, which means the relevant authorization object will be F_BKPF_BES.
As I said earlier, the corresponding field will be BRGRU and and not BEGRU.
Then the question is, WHICIH AUTHORIZATION GROUP DO I SET, for the value of BRGRU, there are thousands !!
To Mohammed
============
How do I "block that GL account for postings in GL master record" ??
Programmatically (ABAP) or via Security Role(s) ?
To Sudhaker
=========
Could you please elaborate the solution USE VALIDATION.
I am not familiar with that!
Is it something that ABAPers do ?
Could something be done by using Authorization Groups // Authorization Objects ?
Thank you all, in advance for your comments/ideas/solutions!
Best regards,
Tom

Dear Tom,
if You insert an authorization Group into FS00 then You should create a role by transaction PFCG to link to Your user.
Then You have to link to this role the transactions You want the user to use and into the Authorization TAB, You have to insert the relevant intervals of Authorization group, excluding the one to which the user cannot post to:
Changed    Accounting Document: Account Authorization for G/L Accounts
Maintained Accounting Document: Account Authorization for G/L Accounts
   Activity                       Create or generate
   Authorization Group            HERE!!!!!!
Then You have to save and to generate.
Anyway the easier way, in my opinion, is to build up a validation by OB28 at line item (call up point 2) and define an error
message in case the use should use the G/L Account in question.
example:
Prerequisite
BKPF-BUKRS = 'MAO1' AND SYST-TCODE = 'FB60'
Check
BSEG-HKONT = '160000'
Message
Message type   E         Message class     Z1
Message number 032
Message text    Please don't use the G/L account 160000
I hope this can help You.
Mauri

Prevent certain cells in TreeView from being selected!?

Hi,
is it possible to prevent certain cells in a TreeView from being selected?
I have a TreeView and the TreeItem's on the first "depth" should not be selectable.
I tried to add an EventHandler to the tree item and caught Event.ANY, but no event was dispatched, when a cell was selected.

Research eventFilters in combination with event.consume():
http://docs.oracle.com/javafx/2.0/api/javafx/scene/Node.html#addEventFilter%28javafx.event.EventType,%20javafx.event.EventHandler%29
Other ways to accomplish this may be via a custom selectionModel:
http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/SelectionModel.html
http://docs.oracle.com/javafx/2.0/api/javafx/scene/control/TreeView.html#setSelectionModel%28javafx.scene.control.MultipleSelectionModel%29
Or by adding a ChangeListener to the selectedItems property of a the default TreeView selectionModel and setting the items to not be selected if it is the at the first "depth".

Preventing Podcasts from being displayed as Music and\or songs.

How can I prevent Podcasts from being displayed as Music and\or songs?

Welcome Mr. Lutz,
Note: This is for Windows version of iTunes because this is the OS I'm running. Even with diferent OSes, the process should be similar enough.
1.Open iTunes
2.Connect your iPod
3.Highlight it in the source list
4.Go to Edit, then Preferences
5.Click on the iPod tab
6.Click on Automatically update selected playlists only
7.Click which playlists you want on your iPod
8.Switch to the Podcast tab
9.Select automatically update all podcasts
10.Click OK
11.Disconnect your iPod
12.Now, follow steps 1-7 with one of your daughter's iPods.
13.Now, switch to the Podcast tab
and select Do not update podcasts
14.Click OK
15.Disconnect the iPod.(Repeat Steps 12-15 with the other mini.
This should allow your iPod to update your songs and podcasts, and allow your daughters to update their songs and no podcasts.
Happy iPodding,

I downloaded Mountain Lion from being on Snow Leopard and lost my entire Office 2004 suite, including Entourage which was my main email server. If I download Office 2008, will I retrieve all my lost Entourage email folders?

I downloaded Mountain Lion from being on Snow Leopard and lost my entire Office 2004 suite, including Entourage which was my main email server. If I download Office 2008, will I retrieve all my lost Entourage email folders?
Other options?

It's not that simple. You didn't lose your Office 2004 suite. Office 2004 won't run in Mountain Lion. You need to update your Office software. You need to purchase either Office 2008 or 2011. Either one can run in Mountain Lion.

Query to find Items in the 'Sales and Marketing' category set.

Hi,
Does any one have the query to view the 'Categories' and 'Items' assigned within those Categories for the 'Sales and Marketing' category set. Or do you know any other way in which I can get the Catalog hierarchy along with the items assigned within the catalog?
Thanks,
hiten
http://india-votes.blogspot.com

And for the second problem try:
WITH cte
AS (
SELECT OD.ProductID
,SUM(OD.Quantity) AS SoldQty
,datepart(month, O.OrderDate) AS MonthNumber
,datename(month, O.OrderDate) AS [Month Name]
FROM dbo.Orders O
INNER JOIN dbo.[Order Details] OD ON O.OrderID = OD.OrderID
WHERE O.OrderDate >= '19970101'
AND O.OrderDate < '19980101'
GROUP BY datepart(month, O.OrderDate)
,datename(month, O.OrderDate)
,OD.ProductID
,cte1
AS (
SELECT P.ProductName
,P.ProductID
,cte.SoldQty
,cte.MonthNumber
,cte.[Month Name]
,ROW_NUMBER() OVER (
PARTITION BY cte.MonthNumber ORDER BY SoldQty
) AS RnMin
,ROW_NUMBER() OVER (
PARTITION BY cte.MonthNumber ORDER BY SoldQty DESC
) AS RnMax
FROM cte
INNER JOIN dbo.Products P ON cte.ProductID = P.ProductID
SELECT [Month Name]
,MIN(CASE
WHEN RnMin = 1
THEN ProductName
END) AS [Least Sold Product]
,MIN(CASE
WHEN RnMin = 1
THEN SoldQty
END) AS [Least Sold Qty]
,MIN(CASE
WHEN RnMax = 1
THEN ProductName
END) AS [Best Sold Product]
,MIN(CASE
WHEN RnMax = 1
THEN SoldQty
END) AS [Best Sold Qty]
FROM cte1
GROUP BY [MonthNumber]
,[Month Name]
ORDER BY [MonthNumber]
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

SAP SD Career for Sales and Marketing Professional in Banking & Insurance Industry

Dear Experts,
I have 8+ years experience in Marketing,Sales and Customer Services in banking and financial service industry. I enquired about SAP courses in authorised SAP centres and they suggested me to go with SAP SD module. I am not sure whether SAP SD will suits to me as it deals with hard core products, but my sales and marketing experience in based on Concept selling. As a marketing guy i have good understanding and knowledge of sales and product life cycle. I have done MCA in 2004, but all experience is into BFSI domain. Now i want to shift into IT. Whether i can take up SAP SD and make a career in it.?.Seeking proper guidance from experts.
Cheers
Ramesh

Hi Ramesh,
You can try to IS-Insurance to suit your domain experience. However, if you look at major SAP Implemented insurance companies adopted SAP ERP and custom according to their need. So, getting a breakthrough in this IS solution would be very hard.
Again, if I come back to your question on BFSI point domain experience. I have my friend who worked in Top 5 BFSI company in India who transitioned his career in SAP SD (studied in SAP Authorized institute and got a job through campus in CMM Level 5 company) because he has BE + MBA. This story was happened 8 years back. But I don't know the current trend in India.
SAP SD is best and it will suit as I saw already a guy went through the same path. Also, check SAP CRM Sales or Service.
You can wait for other members comments who may be transitioned from BFSI sector to SAP to give some ideas.
Best of luck.
Regards
GGOPII

Restricting prod order quantity from being higher than sales order quantty

Dear Experts,
I create production order interactively through co08 ( prod order with respect to sales order). the prod order automatically picks up the quantity in the sales order which is desired, but this order quantity field in the prod order is editable (i.e can be made higher or lower). Please how do I restrict this prod order quantity from being higher than the sales order quantity?i mean what should be done to make system disallow the prod order qty being fixed higher than thesales order qty?

Hi,
Even though you create the production in refernce to the SO, the order quantity can be alter.
This is a normal behaviour of the system.
To restrict any change in the order quantity, you can use tarnsaction variant for CO08. T code is SHD0.
Secondly you can use the following enhancements to restrict the same,
PPCO0006
PPCO0007
Hope this helps you.
SmanS

Bypass an Open Item from being selected

Hi there,
I have a "Z" FBL5N t-code to selection of Customer Open Items. The Open Items that were selected must be blocked to avoid selection (and editing) by another user and besides that, cannot appear in any search until being unblocked in future steps.
I created a Payment Block (in OB27) to avoid the Open Items with this indicator to be paid. But I don't know how to avoid them to show up in a search. The problem is, the customer doesn't want to see this Items available to be selected by another user.
Does anyone know how to do this? Any help would be welcome.
Thanks in advance.

Hi,
Alternately, If you have a definited payment block code (for eg:C), then as i suggested in my earlier post in this thread, in the dynamic selection, you can set a variant (as not equal to C) against the payment block field and PROTECT the variant and default the same in ZFBL5N.
Later, if you do not want the user to alter the variant, you can take the help of ABAP and disable the option of saving a layout by the user. In our company, we did this similar approach with ZMRBR T.Code and its working satisfactorily.
Regards
Hari

How do I get firefox version 36 to play from audio from our selected default program and not the embedded quicktime player?

In our newsroom environment, staff prefers to have MP3s from various download sources open directly in an outside program's window (in this case Goldwave is the preferred program). That being said, with the newer version (36 specifically) the behavior of the program has changed so that MP3s are opening in a separate browser tab, regardless of the preferences in the "Applications" window of the Options as well as the program defaults within Windows. Previous adjustments made to about:config media.windows-media-foundation.enabled as well as media.directshow.enabled and setting to "False" no longer solve this issue.

hi tjh1211, please leave "media.windows-media-foundation.enabled" and "media.directshow.enabled" on their default value and switch "media.play-stand-alone" to false instead...

I would like to know how to prevent an iCloud track from being selected to play in one of the SmartPlaylists that I have made.

How do I stop an ICloud tracks from playing in a SmartPlaylist?
Thank You
John

mende1....I still have the problem.
I have been trying out the "Show/Hide Music in the Cloud" in the View menu and it works fine as long as I am in the "Show/Albums/Artists/Genres" fields of ITunes.
My problem still is that in my SmartPlaylist the iCloud tracks are still showing up and trying to download and play if I don't stop them time. The Hide/Show Cloud doesn't even show up in the View menu if you are listening to a playlist smart or regular either one.
My problem is that I'm on a Satelite connection (Hughes.net) and I'm only allowed 250 mb's download per week unless I download between 2 and 6 am New York time and then the download is free of charge other wise I have to pay extra.
A real pain for sure..
Any Ideas?
thanks
John

[Flex 4.5.1] How to prevent Radio Button from being selected when clicked on? No Changing Event?

I have a very common use case where you have a few radio buttons and only one can be selected at a time. Some of them are basic and on click should be selected right away, but other are more complex and open a pop up which requires some additional user selections after which the user selected OK or CANCEL for example and only after that the selection of the radio button should be applied programatically.
So to solve this issue I've come up with 2 workarounds:
1) make the entire group, that holds the radio button, act as a button with buttonMode="true" mouseChildren="false" and programatically change the radio button within it.
2) hold the current radio button selection in a variable and in the changeHandler of that radio button return the selection back to what was selected before. But this also causes a small flickering of the radio button which gets selected and deselected immediately after that.. not cool.
So my question is... is there something I am missing that could do the job without these workarounds... like a Changing event which I use for the ButtonBar but I can't find on the RadioButton or RadioButtonGroup... thanks!

Hi,thanks for the reply. Actually that was my third option, but not sure if it's very good also..
Here is a simple scenario:
User must select between 2 radio buttons:
1) no volume -> sets variable volume=0 and selects the radio button (that is the normal use case)
2) set volume -> opens up a pop up with a list that has a X button to close and 4 options: 25% volume, 50% volume, 75%, 100%
At this point the set volume radio button should not be selected and the user has 2 choices:
-> hit the X button to close - nothing changes and no volume radio button is still selected and volume is still = 0
-> hit one of the volume % buttons -> the set volume radio button gets selected and the variable volume=25/50/75/100 depending on the button selected by the user.
That's a pretty common scenario and it's bugging me that I can't easily alter the radio button selection logic since whenever I click it, it gets selected and I can't put a logic in between in a standard way. This should apply to any component with selection, just like ButtonBar has it with the Changing event.
So is there any other more convenient way to accomplish this scenario that you could recommend?
Thanks!

Can I exclude photos on my iPhone from being sent to iCloud and how? My goal is to only sync my calendar to the iCloud and exclude everything else. This way I don't have to pay for more space.

My goal is to only sync my calendar to iCloud and exclude everything else. This way I don't have to pay for more space.

Hey Murphie,
I don't pay for more space and I'm backing up two devices to iCloud, a 32G ipad and a 16G phone.
However, you can merely chose NOT to backup to iCloud. Then you won't run out of space. Items synced to iCloud do not take up your backup space.
Now, you WILL have to back up to your computer via iTunes the old fashioned way, or risk losing valuable data. Your choice.
However, if you manage your data responsibility, you won't run out of your 5G of storage on your iCloud backup from normal use.
Good luck

Prevent movies from being downloaded twice (720p and 1080p)

I noticed that iTunes downloaded each of my purchased movies twice. I guess it's the 720p version and the 1080p version.
Anyways as my SSD is getting full I'm wondering if there is a way to just download the 1080p version. I don't feel like deleting the second download every time I buy a movie.

Well the problem is that every movie gets downloaded twice. See the attached screenshots ...

How to do Sales and Marketing analytics, BIapps

hi
I have to work on BI apps(sales & marketing)
my source is coming from siebel9
Plz can any one guide me how to do it.
Thanx in advance

any inputs ?

Inactivating Countries from being selected in Sales and Marketing Online

Similar Messages

Maybe you are looking for