Inactive conditions (Type Y - Inactive because of subsequent price)

Hi all
I have a curious case that seems to be unexplained...
The inactive conditions of type Y
When are the condition types deemed inactive if type Y ??
There was no entries maintained in the condition records upon the existing entry or the entry existing was not changed. There are no exclusions maintained for the condition type as well. The condition type that I am using here is of the condition class A (discounts/surcharges).
The condition is inactive at the document level of type Y.
However, when I check the status information of the condition type, I find the message "Condition is active"
Kindly provide me pointers to resolve the overlying issue.
Thanks in advance
Vinodh S

It could be due to two reasons
1)  Please note that If both the condition types has a Condition Class as B  (Prices) only one pricing condition in the lowest level ( step number ) will be active and rest are made inactive by the system. This is a standard behavior.  So If you have two condition types with same condition class, you may need to change the first one to be a discount or surcharge in V/06
2)  Next go to IMG Path -- SD --> Basic Functions --> Pricing --> Pricing Control --> Define Pricing By Item Category --> Activate pricing for item categories.    There check you have maintained "X" for your item category under the tab "Pricing" and blank against "Statistical value".
thanks
G. Lakshmipathi

Similar Messages

  • Condition Inactive because of subsequent price.

    Hi All,
    During Sales Order Processing in pricing only the last condition is actived & get reflected in net price. All other conditions are shown inactive. When I check the Item-Conditon-Details on the Control Data (Inactive Field) the status is shown Y- Inactive because of subsequent price.
    We have created variant confugiration for the material.
    Can anyone guide me where I have made the mistake.
    Thanks is advance

    hi,
    i dont think it is really a mistake when the system says a condition is inactive because of a subsequent one. Like for example in a sales order there is a PR00 list price and some discount conditions on it.
    But the moment we supply the sales order with a Net price (PN00 condition type)value we dont the discounts also to go along with that. because net price is after considering everything. In such case the discount conditions become inactive because of a subsequent price.
    In your case please check your pricing procedure if it has purposefully been configured that way.
    regards
    sadhu kishore

  • Pricing condition type  is inactive in pricing procedure

    hi,
    We have two  base price in our pricing procedure ,
    fixed -pr00
    and wight wise.-pr01
    both have condition class-B
    while doing VA01 conditon type is showing as inactive(-Y-inactive because of subsequent price.
    Please need ur help

    Thanks for your early reply,my client do not want to make the !st conditiontype (PR00) as discount and surcharge.
    let me elabrate the pricing procedure more detail.. we have two pricing procedure for export sales.
    1-export sales -zabexp
    2-Deemed export sales-zadexp
    pricing procedure -zabexp
    condition type                                     from      to      manual       required   
    proo(base price)                                      -            -         -                   -
    pr01 (base price weight wise )                -           -           -                   -
    it is runing well in zabexp. but the same setting is not running in zadexp.
    Need Help.

  • Item Price Y Inactive because of subsequent price

    Hello Experts,
    I have a 2 pricing conditions with condition class "Price" (B) in the pricing procedure.
    This resulted that the first condition type having control status as Y "Inactive because of subsequent price".
    Only the second condition type is active.
    Please confirm that there is no impact on posting to accounting.
    The confirmation is greatly appreciated.
    Thank you.
    HJMY

    I have a 2 pricing conditions with condition class "Price"
         (B) in the pricing procedure.
    Though already confirmation has been given that there wont be any effect, can you please let me know why you have maintained two pricing which seems to be illogical.
    G. Lakshmipathi

  • Condition Type becoming inactive in IPC

    Hi All,
    Could someone please explain why a pricing condition using a custom condition formula causes the pricing condition to be inactive when viewed through the IPC.
    Thanks,
    AYeung
    Edited by: AYeung on Mar 16, 2011 8:31 PM

    Hi,
    I think routine should not be the reason. Go to the item level in GUI, slect the condition type and click on magnfying glass. if you scroll down, you will see "Reason inactive" or "inactivation reason" or soemthing similar. It may be because of one of the following reasons:
    A     Condition exclusion item
    K     Inactive due to calculation basis/shipping material type
    L     Condition exclusion header or inactive at header level
    M     Inactive due to manual entry
    T     Inactive at header level
    W     The document item is statistical
    X     Inactive Via Formulas or Incorrect
    Y     Inactive because of subsequent price
    Based on this information will you be able to do further analysis.
    Hope this helps.
    Regds,
    Raghu

  • Sales Order Pricing - Condition Type:PR00 inactive

    Hi
    In Sales Order Item level pricing, condition type PR00 become inactive.  It shows reason : Inactive via formulae of incorrect.
    Sales Order is partially delivered & billed.  For remaining deliveries, system not allowing for billing, showing sales order is incomplete.
    Condition Type PR00 maintained manually.  Order quantity changed several times.
    Please guide me on this.
    Regards
    Uma

    Dear Umasankar
    Check in VK12 for the material whether the From To Date is maintained for current period.
    Also go to  V/08 and check your pricing procedure whether any invalid account key is defined.
    Thanks
    G. Lakshmipathi

  • Inactive Condition Types

    Dear Sapients,
                I need ur valuable solution in solving an issue. I have created a pricing procedure for domestic sales and in tht some condition types r in inactive mode. I have verified the settings in condition types n also checked the condition records, n its fine as well. I dont know whats the hidden object in this issue. Pls help me in solving this. Advance thanks for all.

    hi Can you give more details when u say INACTIVE? what do u mean by inactive?
    I have scenario like suppose there are 2 condition types ABCD and WXYZ
    Both the Condition Types ABCD & WXYZ are Condition Types related to Price. Both the Condition types will ahve the same Step number with a different counter.
    WXYZ is a manual Condition Type and will not have any Access Sequence assigned to it. It can be entered only manually in the Purchasing document.
    ABCD is an Automatic Condition type and an Access Sequence will be assigned to it. whenever a Condition record is maintained, then it will be updated in the document with the price from the Condition Record.
    If there is no Valid Condition record founds, then ABCD will not be included and you can enter WXYZ manualy.
    (i belive you mean condition type is not appearing / considered in calculation in pricing procedure thought it is maintained and having condition record)
    still you think this information is not sufficient, then you can check CONDITION EXCLUSION for the condition type is which is INACTIVE
    Alos, possibility is that there is Requirment assgined to condition type which is not getting fulfilled hats why not shoing condition type in pricing procedure
    Regards

  • Inactive condition type

    Dear All
    We have come across a situation where there were few EDI orders which came in and in those orders some of the line items had all its conditions inactive. That is List price, Taxes and customer price all are in yellow status ie. they are inactive.
    As only few of the line items are inactive I am wondering what can be the reason for this behaviour.
    If any one has any idea on the same then pls let me know
    Many Thanks
    Gauravl

    Dear Friend,
    Go to the configuration of the individual condition type, There should be only one condition type having function of Price and quantity. Observe the all and try to change the settting of the "condition class" and "condition type".
    Hope issue will be resolved.
    Regards,

  • How to set a condition type to inactive/statistical during sales order crea

    Hi
    There is a manual header condition (Z0L1) in one our pricing procedure which I want to set to inactive or make it statistical during sales order (doc type Z9) creation in some scenarios.
    How can I achieve?
    Can I use user exit USEREXIT_PRICING_CHECK (Program MV61AFZA) and what code should I write here. Any help would be highly appreciated
    Regards,
    Javed

    Thanks for your replies. Basically this condition type is a manual condition type which will be entered in sales order and then will be available in billing document. But when there is a return order created with reference to that billing document then I want that the manual condition is not deteremined in the return order.
    I tried by assigning a requirement to the condition type in pricing procedure but seems to be pricing requirement don't work for manual header conditions. Then I tried to assign a condition value formula and tried to set the value to zero in case of return orders but that also did not work.
    Then I also tried to apply the same logic in user exit USEREXIT_PRICING_CHECK  in the following programs
    LV69AFZZ
    MV61AFZA
    But still it did not work. Any help would be highly appreciated
    Regards
    Javed

  • Condition Type PR00 on materials and the price

    Hi,
    When I try to create a Sales Order by using VA01, in the item level, I am inputting the material number, quantity and profit center. Then when I select the same line and click on item conditions, automatically, condition type PR00 and the and amount is getting defaulted. However, for certain other materials when I click on item conditions, no condition type PR00 is being picked up. I need to manually input PR00 and the amount.
    My question, I would like to know if there is any report available which shows, which materials are automatically defaulted with PR00 and what is the price automatically defaulted. I would also like to know, which are the materials are not automatically defaulted with PR00. (the cases where required to enter manually).
    I am looking for any report or query etc.
    Thanks in advance.

    Adding to Shiva's comments...
    The value for PR00 will be determined in the order only if the system could find a valid condition record exisitng. I guess, the condition type PR00 has been configured as...with value 'B - Automatic entry has priority' for the field Manual Entries. You can check the same using Tcode V/06. You are entering the values in the sales order item level for PR00 if the system fails to find a valid condition record. As Shiva mentioned, you can check the existing Condition records using the transaction V/LD for the report '15-Material Price'.
    Thanks,
    Ravi

  • Condition Type PB00 is updated with 0 price with program RM06INP0

    Hi Gur

    hi,
    check value at table EINE for field EBELN/EBELP..
    and check value at EINE-PRDAT...
    If you do NOT tick "Price determination w/o PO" then the net price from the Last PO is used (In case there is a last PO in EINE-EBELN/EBELP)
    but ONLY in case no valid condition can be found for the info record.
    The point is that in case no valid info record conditions exists, it can
    take the one from the last PO...
    Regards
    Priyanka.P

  • Statistic Condition Type inactive when duplicated

    Hi gurus,
    I wonder if there's any way to make a statistic condition type become inactive when the user inserts another equal one.
    Example:
    Here is my procedure: ZP0001 with this condition type ZC01 set statistic.
    If I create a new sales order and I insert this condition in the procedure twice, the system does NOT deactivate any of them. It just let them occur at the same time.
    If I go like this with a non statistic condition type, then the system deactivate all duplicated types and only remains the last one inserted.
    Do you know if this behaviour is possible for statistic condition types in any way?
    Thanks in advance,
    John

    Hi,
    a statistical condition type can not be inactive because it is not taken into account in the calculation per definition as statistical.
    One more sentence to clarify to the sentence before. It will be inactive but still displayed - as this is the nature of a statistical condition.
    So far so good. But I know exactly what your problem is, when your statistical condition type is present twice you would like to surpress the earlier record.
    We had a similar requirment once. We had two different statistical condition types which were displayed at the same time. 
    The requirement was to only display one of the two condition types. When A was present B should not be shown. I tried with condition exclusion but it did not work for statsitical conditions (as they can not be set inactive...). But it worked very good with a pricing requirement we created ourselves.
    Good Luck.

  • Condition type inactive

    hi all,
    why condition type is inactive in sales order item level.
    when i save invoice it shows error in pricing.
    pls let me know.
    Regards
    Rams

    You can get a better idea by going to the sales order at the item level in the condition tab, highlight your condition type and click on Analysis. It will give you an idea why it is inactive.
    If it is a price condition type then there must another price condition type below so it is overwriting the first condition type.
    Regards
    AK

  • Discount calculating sum of Active & Inactive Base Price condition type

    Hi, 
          For condition type ZBPO-Base Price maintained condition record with two key combinations, In sales order Conditions Price determined for ZBPO condition type with Inactive and Active.  But Discount condition type ZDCO calculating 15% discount on sum of the Inactive & Active of ZBPO amount.
    Requirement is Discount should be calculate Active ZBPO condition type only. Without deleting inactive condition type in Sales Order Conditions, what are the configurations need to do.
    For Ref: Please check the below screen short.
    Regards,
    Parviz.

    Dear Lakshmipathi,
                 Thanks for replay, Please check the below screens as you asked.
    Inactive:
    Active:
    In Analisys I kept mouse curse on the condition types I'm not get any message on that (Dont know the reason why your asking that). Clicked on condition type and sent with access details.
    Inactive:
    Active:
    Regards,
    Parviz.

  • Condition value is Inactive in sales order

    Hi Friends,
    I am facing the following problem,
    In the sales order, it is picking  all condition records as per pricing procedure and calculates perfectly. But in the header net value field it is not updating. It is showing one condition record value only.
    During analysis I found that the all records is inactive except which one is updating in the net value field  and reason is "Y - Inactive because of Subsequent Price."
    Please help me to solve this issue.
    Thanks in Advance.
    Dilip

    Dear Dilip
    For information, when you have a condition record showing as
    inactive it is because you have a base price condition record
    somewhere below your discounts.
    Check your condition records below the discounts, are
    there any of condition class 'B'? If yes, then that is why they are inactive.
    thanks
    G. Lakshmipathi

Maybe you are looking for

  • Urgent: Help required for fetching CHILDNODE from an XML schema.

    Hi All, Good Morning to all, i have problem in extracting the child node name. I have created a xml schema say "emrxmlsample3.xsd" based on this schema i have created a xmltype table and inserted a value to the table. I have a problem in fetching the

  • My ipod won't sync with my desktop

    I have an ipod touch with iclouds recently installed which syncs with both my new Macbook & my older Mac desktop. I only want to use icloud to sync my address book and my iCal. I have another solution for syncing my mail and it didn't appear that I c

  • Context menu tab SERVICE not found in IB PI 7.1

    Hi, I am working in PI 7.1 for a scenario IDOC r/3 to PI 7.1 file. Here in IB I dont see any SERVICE tab to configure/create. I am getting error in IDX5 > Message split according to Receiver list>'Party and service not found'. I am new to this. Could

  • Newbie in need assistance configuring iChat server (LDAP).

    I needs some assistance in setting up iChat server for our office. I running LDAP and I have the iChat server basics setup and it is working, however my boss wants to set up different domains in iChat for the various departments (i. e. Accounting, Sa

  • Select only numbers from database

    Hi All, I need to retrieve numerical data's from the database. Data base table has both numerical and text values. now I want to retrieve only numerical data's. Can any one help me on this, Thanks and helps will be appreciated.