Inactive connection in update rules

Hello,
How do I update my update rules for 0MATERIAL_ATTR in the production system (BW prod)?
I have attempted to transport the update from dev. I have the info object in the uodate rules, but not the connection to the source field.
How do I get the connection active in the update rules?
Best regards,
Fredrik

Frederik,
create new transport from DEV for Update Rules( Make some change in the description or some space in the routine). Transport this request to production it will be rectified.
or try to import the previous transport again. When cube gets changed UR get deactivated. Try to reactivate the UR either by creating new transport or reimport the old one.
Last week i faced the same problem. i reimported the same transport i sloved my problem. one time i created new transport for UR, i imported in Production it's activated my UR.
all the best.
Regards,
Nagesh Ganisetti.

Similar Messages

"update rules inactive " error when importing transport request

Hi experts,
I am stuck while importing transport request of update rules. I am moving transport request of update rules from 1 system to another and stuck while importing it in 2nd system. Only two update rules are stuck among all giving an error of "inactive update rules".
I have again tranported it twice after activating theose two update rules.
Please help!!!!!

Hi Heena,
Can you provide more details of the issue like is it a DSO to DSO transformation, error message etc.

Update Rules gets inactive automatically

Hello All,
After the transport of the Update rules with the related objects to the not modifiable system, everything works fine for some time. But after sometime many update rules gets inactive automatically. We hav'nt changed the Info provider or transported any thing.
We are in BI 7.0.Can any one help me to analyse this issue.
Thanks,

Hi,
This problem may ocurs due to dependecies on the objects that you transported, any way you can activate them using the below Program,
Go to SE38
Run the program : RSAU_UPDR_REACTIVATE_ALL
Give the necessary details and execute the Program.

How to locate inactive transfer reules and update rules

Hi SAP Gurus,
could some one tell me how to locate all the INACTIVE transfer reules and update rules in our system? i DONT want to so the mass activation of transfer/update rules. I just want to locate all the inactivate transfer/upfate rules.
ur help will be appriciated in terms of points..
manmit

Hi,
Inactive UR can be seen by RSA1->Infoprovider->Settigns(menu bar)->Select Display Options->only display restrictions->All inactive objects...
It will show inactive infoproviders along with inactive update rules.
Similarly inactive infosorce/TR can be seen by RSA1->Infosource->Settigns(menu bar)->Select Display Options->only display restrictions->All inactive objects...
Hope it helps.
Regards,
Aditya

Update rules are inactive

Hello All,
i have added another dimension 0mat_unit to the existing infocube of multiprovider to create a report.
As i added new dimensions underlying update rules became inactive and when i try to activate them iam getting message IC=xxxx IS=yyyy error when checking the update rules.
can you please give ur advice to solve the problem

Hi,
When you add some new objects to your cube then you have to add them in your info source and data source in order to get correct data and if you dont want to populate data to them from source then you can have your own rules like routines and formulas so please add them to comm structure and transfer structure and map the rules and then try to activate them it will work,
Thanks,
Pavan.M

Can't see Update rules and infopackage in the transport connection

Hello, experts!
I need to transport newly created (and activated) update rules and infopackage from Dev to QA environment. When I open transport connection and select infosource, I don't see new update rules and infopackage. There are few update rules for different source systems in this infosource and I can see all of them in the transport connection except for this new one.
Your help is appreciated.
Thanks, Alina.

in Transport connection please select ur higher level Object say Infocube...and collect data flow before then you will ur Update rules and IP

UPDATE RULES INACTIVE WHEN BI CONTENT INSTALL

Hi,
When i activating business content update rules are not coming as active.
when i raise OSS note to SAP the following suggession given.
editing the UPDRs, and changing the update method from the Time Ref. tab.
how to edit update rules, from time Ref tab there is routine, for 0cal year/month i need assign source field in time ref. tab.
what is the code for it please let me know/ how to resove the issue.
unless i write the code / assiging the source field the update rules cannot be activated.
Thanks,
Sakali

Hi,
You can easily edit your update rules by getting into change mode.
Step 1: Double Click on your KF relevant Ty column
Step 2: After doing necessary mappings in KF Calculation Tab, Chars Tab
Step 3: Click on Time Ref Tab and again click on Method of your Time Char
You need to be careful about How you want to map your Time Chars. It depends on your business logic. Discuss with your Functional team or please cross check with your Blue print before you map any fields.
Regards,
Suman

Updates rules inactive after add KF

Hi experts,
we have to add aditional key figures to a infocube that is already in Q and P systems (with data).
Now we are not being able to transport the update rules to those systems.
Correct me if i'm wrong but if you add aditional characteristic's or key figures you don't need to delete data in the infoproviders in the ohter systems.
we have already try to transport:
cube and then update rules;
all together cube and update rules
in both cases it fails.
thanks in advance for any sugestion

Varadarajan, our database is in SQL the spaces requirements that you refer are the same for this scenario? The fact table for this infop is 43G in Q system and our database have enough space.
am i making this analysis ok including the Db space?
Praveen the update rules are not datamart's.
The transport ends with a 8 code and for each update rule inlcude gives the message:
Update rules 2237DNCKOFJ13SFIK2PT581MQ read in version M
Error when activating update rule 2237DNCKOFJ13SFIK2PT581MQ
Sadeesh, all necessary objects are in the destiny system and no modifications were made at infosource/data source level.
Thank you all for the answers.

Update Rules inactive-Log not found in main memory

Hi
I am trying to active update rules but it is failing with log not found in main memory.
I tried update rules syntax check and system says no error when checking the update rules.
What could the reason? How can I dig this further? Please advise ASAP as this is urgent.
Regards
Vennela

Check out if there has been any update error in VA02 using transaction SM13.
Lokesh

Update rules deactivated only has to open the system..

Hello Experts,
-- ODS and update rules are already in Production.
-- I have made changes to the ODS by adding new Infobjects.
-- activated the update rules.
-- When the ODS and update rules are transported. Update rules get deactivated
-- And a message 'Data target changed, suggestion for the update rules generated'
Detailed message:
Data target was changed. Suggestion for update rules generated
Message no. RSAU287
CAUSE&
The data target has been changed (for example, InfoObjects have been added or deleted).
System response
The update rules have been set to inactive.
Procedure
Check the proposal for the update rules: Newly added key figures or characteristics are updated directly using the source-InfoObject from the InfoSource if the InfoSource contains these InfoObjects. Otherwise, the calculation type is set to 'Routine'. Newly added key figures, data fields, or attributes are set to 'No Update'.
The rules for key figures and for characteristics must be checked and adjusted appropriately.
Detailed message end.........
-- Do not get activated by retransporting. or doing a fresh request of the update rules.
-- Currently the only I can see by opening the system and activating them. Wondering if we have any other alternatives to activate these update rules for the ODS
Any solutions:
-- Wondering if I am missing some procedure to transport.
-- Please feel free to post your views / suggestion in case you had a similar situation before.
Many thanks in advance,
BWer
Message was edited by: BWer

BWer,
If you collect your transport in a big lump of a single transport, the tranport connection may not organize it in the order of the proper dependency, so it is best to split it to separate transports as stated above to ensure the proper dependencies.
To fix the issue right now, you can either
1) take another transport through of only the updated / activated update rule or
2) if you know what you are doing and if the client is okay with it, open the system, activate the update rule and when prompted for a transport, create a new one and go to SE10 to clean up that repair transport by deleting the subtasks.
I would probably recommend option 1 for you. I only do option 2 if it is an emergency and there is no transport window for another week or longer or it just simply cannot wait.

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Simple creation of Update Rule from BW Data Source

Hi guys,
 Pertaining standard SAP Business Content extractors
 I am referring to InfoCube : 0PA_C01(Headcount and Personnel Actions)
 I am attempting to create an Update Rule from Info Source : 0HR_PA_PA_1(Headcount)
 This Info Source : 0HR_PA_PA_1(Headcount) is connected to BW Data Source(Not R/3!) 0HR_PA_PA_1
 I have created an Info Package for this Info Source and managed to get 15 records{In Contrast to my 68800 Records from Info Source : 0HR_PA_0(Employee)}
 So, when I create an Update Rule to Connect Info Cube: 0PA_C01(Headcount and Personnel Actions) to Info Source to Info Source : 0HR_PA_PA_1(Headcount), I get the following error
ERROR : IC=0PA_C01 IS=0HR_PA_PA_1 error when checking the update rules
Could you please also advice, why do I only get 15 records for Data Source 0HR_PA_PA_1 ?
P/S : I am on BW 3.5

Hey Rohini,
 This Data Source: 0HR_PA_PA_1(Headcount) is tricky to me because it`s a BW Data Source.
 Exact Error Message is as follows :-
"Error Message : RSAU461
 IC=0PA_C01 IS=0HR_PA_PA_1 error when checking the update rules "
 My Exact Problem is that I don`t see any values for the following fields in my Info Cube : 0PA_C01(Headcount and Personnel Actions)
Country;
Country Code;
Gender;
Nationality;
Language;
Postal Code;
Region;
Position;
Job;
Payroll Area;
Payroll Group;
Pay Scale's;
Pay Grade's
This is because, this information is supplied by InfoSource : 0HR_PA_PA_1
But I don`t have an Update Rule for this InfoSource in my InfoCube : 0PA_C01
So, that's why I am attempting to create this additional Update Rule
 And also, could someone enlighten me why would SAP not include such a standard Update Rule when they have already idenfied those needed fields in a Cube ? This is suppose to be a STANDARD workable Business Content right ?
P/S: I have applied Note : 336229

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error while Installing the update rules in business content

Hi All,
I got the following error,when i was installing the update rules : Object UPDR D4C8V3KA00XD5ANPVUAH9KQDJ could not be found in version M. but these update rules appear as inactive mode in bi content-object types-updaterules-selection-inactive status.
Please could i know where we can check version status for business content pdaterules. but it was showing NOT FOUND IN Version M .
please anybody can help me for solving this error.
i will asign points for your inputs.
regards,
kumar.
Edited by: kumar kumar on May 20, 2009 5:58 AM

Hi,
You can check the Content Release and Last Content Modification for your update Rules following thee given path:
RSA1>BI Content>object Types>Update Rules>Select object(search for ur update rules) -->Transfer Selections.
After they are being transfered to the right pane.On right pane (where you can see the its technical name) scroll towards right you will see last three tabs as "Content Release,Last Content Modification and Person responsible".
Change the Grouping as "Before and afterwards" and then try installing.
Hope it helps.

Error when transpotring Update Rules

Dear colleagues.
When transporting an update Rules into our Quality enviroment the system pops up the following error:
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0.
I've verified the Update Rules on the Quality System and everything is correct but it remains inactive due to the transport fails.
I would appreciate your feedback.
Thanks in advance.

Dear khaja.
I send you the transport log as well as the Return Code.
Error when activating update rule 5MYASZMBOIQZSRR60674OBKJ3
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS error when generating InfoCube Update program
IC=ZWEPP_C02 IS=ZWE_BOM_RMX_IS syntax error: rows 0 (When generating the update program for data target ZWEPP_C02, InfoSource ZWE_BOM_RMX_IS, a syntax error occured in row 0. Message no. RSAU466)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
Please, let me know if you need anything else.
Thanks.

Inactive connection in update rules

Similar Messages

Maybe you are looking for