Inactive Customer Report - need help!

I need to create a report to show inactive customers based on their invoice and order history.
It needs to show a list of customers that:
1. havent got an invoice on thier account between a certain set of dates
2. have no open orderr
We use queries and XL reporter. Anyone have any ideas?
Thank
Lucie

Hi Lucie,
how about something like this:
select distinct t1.Cardcode, t1.cardname from OCRD t1
inner join OINV t2 on t1.cardcode=t2.cardcode
inner join ORDR t3 on t1.cardcode=t3.cardcode
where t2.createdate not between '2011-03-01' and '2011-03-02' and
(select count(t3.docentry) from ordr t3 where t3.docstatus='O' and t3.cardcode=t1.cardcode)=0
just add SAP user inputs (sorry, i'm lazy for that right now), and i if i understood correctly what you are looking for, this may just as be it
Regards,
D

Similar Messages

BP Inactive Customer Report discrepancy between users

The out-of-the-box Inactive Customer report under Business Partners gives different results for two users. For example, one user (a superuser) gets almost 600 hits on inactive customers while another user (not a superuser) gets less than 200. No options or filtering is selected by either user.
I'm thinking it's related to authorizations, but can't figure out which might cause this.
TIA

hi john,
Go to
Administration>System intializatioin>General Authoirzation-->
Select user a right side>Drill down BP Master>Drill Down
Business Partner Reports-->
Select Inactive customers-->Give Full Authorization
and Update authorizations.
Also check properties in selection creteria
Whether user wrongly checked any properties
detick it and
also Tick mark Ignore properites right at the top.
Hope above answer helps you.
Jeyakanthan

Hi! I am newbie to Reports need help with check boxes

Hi! I am newbie to Reports need help with check boxes. I am try-in to make a new check boxes that will validate in runtime. I have created two frames and one frame is dummy and other frame has big X line on it with conditions. Is this a right way to create check box! Please help thanks!

and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine.

Custom Report Needed

Hi,
One of my client needs the custom report as follows . The report should display the MONTHLY SALES QTY , AVAILABLE STOCK AT THE ENDOF THE MONTH for an Item by Warehouse or Location. The format is like this
                                   Item1                                                                         Item2
                  Monthly Sale QTY,   Available Stock                Monthly Sale QTY,   Available Stock
WHS-1                     x                         y                                          x                               y
WHS-2                     x                         y                                          x                               y
WHS-3                     x                         y                                          x                               y
if any custom query or XL- Report available , plz reply me .
Regards,
Srinivas

Hi Srini,
Check the thread,
Re: SALES REGISTER QUERY
Customer Aging report query
aging query
Regards,
Madhan.

Stand alone oracle report - need help asap

Hi,
We are in ORACLE Apps 11i. We started using ORACLE BI Publisher to create templates for the Oracle Reports. How we are doing reports now is
1) create data definition XML which has all the queries embedded.
2) Create Data definition in XML Publisher Admin responsibility.
3. Attach the Data definition XML to that.
4. Create a concurrent program definition for the report with XML Type and run the report and save the data file with tags.
5. Create the template ,rtf in Word and export data using ORACLE BI Publisher. 6. Create template definition in the XML Publisher Admin responsibility and attach this .rtf to that and run the report.
Now I have a requirement stating that the REPORT SHOULD BE AN ORACLE STAND ALONE REPORT AND THE REPORT NEEDS TO BE RUN THROUGH CONCURRENT PROGRAM SCREEN. I am planning on doing the following steps.
1. I have to create an .rdf using report builder.
2. Create concurrent program executable and definition for the report.
3. Create data definition in XML Publisher admin responsibility.
4. Run the report in apps.
5. Create the tempalte .rtf in word and export data with the XML Data file with tags,
6. Run the report.
Am I correct? Any help is appreciated asap.
Thanks
Akil

You said,
standalone report ?? is that mean without using bipublisher ??
1st method.
create concurrent program, output xml,
create data template, create datadefintion , attach Datatemplate.
run the cc pgm, get xml, design RTF , create template definition , attach RTF,
run the cc pgm, you get the pdf output.
2nd method.
create rdf,
create concurrent program, output xml,
run the cc pgm, get xml, design RTF ,
create datadefintion , create template definition , attach RTF,
run the cc pgm, you get the pdf output.
, both requires, cc pgm, rtf, data defintion , template definition.
only differnece is , how do you get the data, i mean, xml...
data template or RDF.

Custom reports needed in excel format..12.0.6

Hi
we are on 12.0.6
All of our custom reports are defined with output format of pdf at the time of defining executable and program from sysadmin
Now there is a need by our costing department that they need all the finanical related reports in excel format
we tried converting the pdf to excel but format variation is too huge and to no use
how can we make it possible that reports come in excel format directly
there r seeded oracle reports, which when viewed after running, open in excel..they have output format defined as XML i guess
Please advice
Rgds
Muhammed

Hi,
Please see this thread.
XML publisher output report in excel format
Re: XML publisher output report in excel format
Thanks,
Hussein

Red light on new HH3- New custome,r need help trye...

Hi new bt broadband customer need help getting connect for the very first time. Iv got RED broadband light on all the time and have tryed everything to get it working. Any ideas why its not connecting please. Activation dat was 17th February 2011 .
Many thanks

suggest you mail the board mods they are good at solving your sort of problem forum.moderation.team@bt .com including a link to this post and your bt phone number and bt account number they normally get back to you within 72hours as all emails are dealt with in turn
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

ALV OOPS report - Need help

Hi Friends,
I just want to convert a normal alv grid report to ALV OOPS report using classes,methods and objects, can you please help me on it.
*I have sent a sample ALV grid report program.
REPORT YSDB_ALV_ECC NO STANDARD PAGE HEADING LINE-SIZE 260 LINE-COUNT 58.
TABLES:
                VBRK,
                VBRP.
TYPE-POOLS: SLIS.
TYPES:
              BEGIN OF Y_VBRK_STRUCT ,
                    VBELN TYPE VBRK-VBELN,
                    FKART TYPE VBRK-FKART,
                    FKDAT TYPE VBRK-FKDAT,
                    BUKRS TYPE VBRK-BUKRS,
                    NETWR TYPE VBRK-NETWR,
              END OF Y_VBRK_STRUCT.
TYPES:
                 BEGIN OF Y_VBRP_STRUCT,
                        VBELN TYPE VBRP-VBELN,
                        POSNR TYPE VBRP-POSNR,
                        MATNR TYPE VBRP-MATNR,
                        FKIMG TYPE VBRP-FKIMG,
                        AUBEL TYPE VBRP-AUBEL,
                        KOSTL TYPE VBRP-KOSTL,
                        PS_PSP_PNR TYPE VBRP-PS_PSP_PNR,
                        ARKTX TYPE VBRP-ARKTX,
                 END OF Y_VBRP_STRUCT.
TYPES:
              BEGIN OF Y_DISPLAY_STRUCT,
                    VBELN TYPE VBRK-VBELN,
                    FKART TYPE VBRK-FKART,
                    FKDAT TYPE VBRK-FKDAT,
                    BUKRS TYPE VBRK-BUKRS,
                    NETWR TYPE VBRK-NETWR,
                    POSNR TYPE VBRP-POSNR,
                    MATNR TYPE VBRP-MATNR,
                    FKIMG TYPE VBRP-FKIMG,
                    AUBEL TYPE VBRP-AUBEL,
                    KOSTL TYPE VBRP-KOSTL,
                    PS_PSP_PNR TYPE VBRP-PS_PSP_PNR,
                    ARKTX TYPE VBRP-ARKTX,
              END OF Y_DISPLAY_STRUCT .
DATA: W_INDEX LIKE SY-TABIX.
DATA: W_FIELDCATALOG TYPE SLIS_FIELDCAT_ALV.
DATA: T_FIELDCATALOG1 TYPE SLIS_T_FIELDCAT_ALV.
DATA: W_REPID TYPE SY-REPID.
DATA: T_VBRK_ITAB TYPE STANDARD TABLE OF Y_VBRK_STRUCT .
DATA: T_VBRP_ITAB TYPE STANDARD TABLE OF Y_VBRP_STRUCT .
DATA: T_DISPLAY_ITAB TYPE STANDARD TABLE OF Y_DISPLAY_STRUCT.
DATA: E_DISPLAY TYPE Y_DISPLAY_STRUCT.
SELECT-OPTIONS S_VBELN FOR VBRK-VBELN.
SELECT-OPTIONS S_BUKRS FOR VBRK-BUKRS.
SELECT-OPTIONS S_FKDAT FOR VBRK-FKDAT.
START-OF-SELECTION.
PERFORM F_GET_DATA1.
PERFORM F_PROCESS_DATA.
PERFORM F_FIELDCATLOG.
PERFORM F_DISPLAY_DATA.
PERFORM F_CLEAR_FIELDS.
*&      Form get_data1
      text
FORM F_GET_DATA1 .
SELECT VBELN FKART FKDAT BUKRS NETWR
    FROM VBRK
    INTO TABLE T_VBRK_ITAB
   WHERE BUKRS IN S_BUKRS
     AND FKDAT IN S_FKDAT
     AND VBELN IN S_VBELN.
IF SY-SUBRC NE 0.
    FREE: T_VBRK_ITAB.
ENDIF.
IF NOT T_VBRK_ITAB IS INITIAL.
    SELECT VBELN POSNR MATNR FKIMG AUBEL
           KOSTL PS_PSP_PNR ARKTX
      FROM VBRP
      INTO TABLE T_VBRP_ITAB
      FOR ALL ENTRIES IN T_VBRK_ITAB
     WHERE VBELN EQ T_VBRK_ITAB-VBELN.
    IF SY-SUBRC NE 0.
      FREE: T_VBRK_ITAB.
    ENDIF.
ENDIF.
ENDFORM.                                                    " GET_DATA1
      text
--> p1        text
<-- p2        text
FORM F_PROCESS_DATA .
SORT T_VBRK_ITAB BY VBELN.
SORT T_VBRP_ITAB BY VBELN.
CLEAR: W_INDEX.
UNASSIGN <FS_STRUCT1>.
UNASSIGN <FS_STRUCT2>.
LOOP AT T_VBRK_ITAB ASSIGNING <FS_STRUCT1>.
    READ TABLE T_VBRP_ITAB ASSIGNING <FS_STRUCT2> WITH KEY VBELN = <FS_STRUCT1>-VBELN BINARY SEARCH.
    IF SY-SUBRC EQ 0.
      MOVE SY-TABIX TO W_INDEX.
      WHILE SY-SUBRC IS INITIAL AND <FS_STRUCT1>-VBELN = <FS_STRUCT2>-VBELN.
*Header Items Moving
        MOVE:
               <FS_STRUCT1>-FKART TO E_DISPLAY-FKART,
               <FS_STRUCT1>-FKDAT TO E_DISPLAY-FKDAT,
               <FS_STRUCT1>-BUKRS TO E_DISPLAY-BUKRS,
               <FS_STRUCT1>-NETWR TO E_DISPLAY-NETWR.
*Line items Moving
        MOVE: <FS_STRUCT2>-VBELN TO E_DISPLAY-VBELN,
              <FS_STRUCT2>-POSNR TO E_DISPLAY-POSNR,
              <FS_STRUCT2>-MATNR TO E_DISPLAY-MATNR,
              <FS_STRUCT2>-FKIMG TO E_DISPLAY-FKIMG,
              <FS_STRUCT2>-AUBEL TO E_DISPLAY-AUBEL,
              <FS_STRUCT2>-KOSTL TO E_DISPLAY-KOSTL,
              <FS_STRUCT2>-PS_PSP_PNR TO E_DISPLAY-PS_PSP_PNR,
              <FS_STRUCT2>-ARKTX TO E_DISPLAY-ARKTX.
        APPEND E_DISPLAY TO T_DISPLAY_ITAB.
        CLEAR E_DISPLAY.
                  ADD 1 TO W_INDEX.
        READ TABLE T_VBRP_ITAB ASSIGNING <FS_STRUCT2> INDEX W_INDEX.
        IF SY-SUBRC NE 0.
          EXIT.
        ENDIF.
      ENDWHILE.
    ENDIF.
ENDLOOP.
ENDFORM.                                                    " GET_DATA3
*&      Form Fieldcatlog
      text
--> p1        text
<-- p2        text
FORM F_FIELDCATLOG .
W_FIELDCATALOG-FIELDNAME = TEXT-001.
W_FIELDCATALOG-SELTEXT_L = TEXT-002.
MOVE : 1 TO W_FIELDCATALOG-COL_POS,
         20 TO W_FIELDCATALOG-OUTPUTLEN.
APPEND W_FIELDCATALOG TO T_FIELDCATALOG1.
CLEAR W_FIELDCATALOG.
W_FIELDCATALOG-FIELDNAME = TEXT-003.
W_FIELDCATALOG-SELTEXT_L = TEXT-004.
MOVE : 2 TO W_FIELDCATALOG-COL_POS,
           20 TO W_FIELDCATALOG-OUTPUTLEN.
APPEND W_FIELDCATALOG TO T_FIELDCATALOG1.
CLEAR W_FIELDCATALOG.
W_FIELDCATALOG-FIELDNAME = TEXT-005.
W_FIELDCATALOG-SELTEXT_L = TEXT-006.
MOVE : 3 TO W_FIELDCATALOG-COL_POS,
          20 TO W_FIELDCATALOG-OUTPUTLEN.
APPEND W_FIELDCATALOG TO T_FIELDCATALOG1.
CLEAR W_FIELDCATALOG.
W_FIELDCATALOG-FIELDNAME = TEXT-007.
W_FIELDCATALOG-SELTEXT_L = TEXT-008.
MOVE : 4 TO W_FIELDCATALOG-COL_POS,
         20 TO W_FIELDCATALOG-OUTPUTLEN.
APPEND W_FIELDCATALOG TO T_FIELDCATALOG1.
CLEAR W_FIELDCATALOG.
W_FIELDCATALOG-FIELDNAME = TEXT-009.
W_FIELDCATALOG-SELTEXT_L = TEXT-010.
MOVE : 5 TO W_FIELDCATALOG-COL_POS,
          20 TO W_FIELDCATALOG-OUTPUTLEN.
APPEND W_FIELDCATALOG TO T_FIELDCATALOG1.
CLEAR W_FIELDCATALOG.
W_FIELDCATALOG-FIELDNAME = TEXT-011.
W_FIELDCATALOG-SELTEXT_L = TEXT-012.
MOVE : 6 TO W_FIELDCATALOG-COL_POS,
         20 TO W_FIELDCATALOG-OUTPUTLEN.
APPEND W_FIELDCATALOG TO T_FIELDCATALOG1.
CLEAR W_FIELDCATALOG.
W_FIELDCATALOG-FIELDNAME = TEXT-013.
W_FIELDCATALOG-SELTEXT_L = TEXT-014.
MOVE : 7 TO W_FIELDCATALOG-COL_POS,
        20 TO W_FIELDCATALOG-OUTPUTLEN.
APPEND W_FIELDCATALOG TO T_FIELDCATALOG1.
CLEAR W_FIELDCATALOG.
W_FIELDCATALOG-FIELDNAME = TEXT-015.
W_FIELDCATALOG-SELTEXT_L = TEXT-016.
MOVE : 8 TO W_FIELDCATALOG-COL_POS,
         20 TO W_FIELDCATALOG-OUTPUTLEN.
APPEND W_FIELDCATALOG TO T_FIELDCATALOG1.
CLEAR W_FIELDCATALOG.
W_FIELDCATALOG-FIELDNAME = TEXT-017.
W_FIELDCATALOG-SELTEXT_L = TEXT-018.
MOVE : 9 TO W_FIELDCATALOG-COL_POS,
         20 TO W_FIELDCATALOG-OUTPUTLEN.
APPEND W_FIELDCATALOG TO T_FIELDCATALOG1.
CLEAR W_FIELDCATALOG.
ENDFORM.                    " Fieldcatlog
*&      Form DISPLAY_DATA
      text
--> p1        text
<-- p2        text
FORM F_DISPLAY_DATA .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM     = W_REPID
      I_CALLBACK_TOP_OF_PAGE = 'AAAAAAAAADDAADA' "TEXT-021
      I_GRID_TITLE           = TEXT-020
      IT_FIELDCAT            = T_FIELDCATALOG1
    TABLES
      T_OUTTAB               = T_DISPLAY_ITAB.
IF SY-SUBRC NE 0.
    EXIT.
ENDIF.
CLEAR: W_REPID.
CLEAR: T_FIELDCATALOG1.
ENDFORM.                    " DISPLAY_DATA
*&      Form F_Clear_fields
      text
--> p1        text
<-- p2        text
FORM F_CLEAR_FIELDS .
FREE: T_VBRK_ITAB.
FREE: T_VBRP_ITAB.
FREE: T_DISPLAY_ITAB.
CLEAR: W_FIELDCATALOG.
ENDFORM.                    " F_Clear_fields
Regards
Dinesh

In ALV oops,
1. You need screen on which you must create a custom container. - screen 100
2. In PBO of 100, create module for displaying ALV
MODULE DISPLAY_ALV OUTPUT
PERFORM CREATE_CONTAINER "IN WHICH YOU USE THE CREATE OBJECT METHOD OF CL_GUI_CUSTOM_CONTAINER
PERFORM CREATE_ALV "IN WHICH YOU USE CREATE_OBJECT METHOD OF CL_GUI_ALV_GRID.
PERFORM PREPARE_FIELDCAT "creating fcat using LVC_S_FCAT structure
PERFORM DISPLAY "here you use the SET_TABLE_FOR_FIRST_DISPLAY method of CL_GUI_ALV_GRID class,
where you provide the internal table name and fieldcat internal table
ENDMODULE

Ar aging report, need help urgent please help!

Hey All Gurus,
Im in a thick soup here. I am trying to do something like this -
if you see the selection screen i have rep and super rep, when a user enters a rep value --- it should use the same value to pull all open items for the super rep as well, since they are essentially the same. please help! this one needs to be done fast. i am pasting the code so that it will be easier ...
thanks a million!
*& Report ZFDOFW04_NEW
REPORT ZFDOFW04_NEW MESSAGE-ID FR
LINE-SIZE 132
LINE-COUNT 60.
*==================================================================
Program: ZFDOFW03 - Aged Trial Balance Report
This produces an Accounts Receivable Past Due Aging Report
in a more simplified/condensed format than the
SAP supplied aging report program - RFDOPR10.
This program is a modified copy of RFDOFW00, - a SAP
Future-Due Report.
This was a 'rush' job - program probably should be
rewritten someday not using logical databases as that
maybe why this runs so slowly!
Original: Feb 1997.
MAINTENANCE HISTORY:
NES071797 Copied from ZFDOFW03. Adding parameter for saeles rep.
JDEDERER - changed header text so it is differnet from ZFDORW03. 9/23
*TEXT SYMBOLS :
001 Open items per
002 O p e n
003 D u e o n
004 cc ba in total
005 until
006 Days until
007 Days over
008 Days
009 over
011 valid until........
012 Insurance limit.....
016 F u t u r e
017 + days
018 D u e
020 Last dunn.notice...
021 Dunning level....
030 S U M M A R Y S H E E T
031 =====================
050 Name Page
051 Burton Snowboard
SELECTION TEXTS:
SUMMEN Output totals only
TAGE1 Due date I until
TAGE2 Due date II until
TAGE3 Due date III until
TAGE4 Due date IV until
TABLES: T001, KNA1, KNB1, KNB5, BSID, BSEGA, RFPDO1, KNVP,
T014, "credit control areas JAM
KNVK, "cust master - contact partner JAM
T014T, "Credit control areas names
BKPF, "TONY ISSUE 4743
TVKO, "TONY ISSUE 4743
KNKK. "cust master - credit mgmt JAM
TYPES: BEGIN OF TOT_TYPE, "DEVK939546
BUKRS LIKE LFB1-BUKRS, "DEVK939546
GSBER LIKE BSIK-GSBER, "DEVK939546
KKBER LIKE BSID-KKBER,
RAST1 TYPE P, "DEVK939546
RAST2 TYPE P, "DEVK939546
RAST3 TYPE P, "DEVK939546
RAST4 TYPE P, "DEVK939546
RAST5 TYPE P, "DEVK939546
RAST6 TYPE P, "DEVK939546
RAST7 TYPE P, "DEVK939546
END OF TOT_TYPE, "DEVK939546
TOT_TAB TYPE TOT_TYPE OCCURS 0. "DEVK939546
CONSTANTS:
C_FALSE TYPE I VALUE 0, "JAM
C_TRUE TYPE I VALUE 1.
DATA: BEGIN OF GTAB OCCURS 1000,
SUPER(10) TYPE C, "TONYC
REP(10) TYPE C, "TONYC
FILKD(10), "tonyc show buying groups
LAND1 LIKE KNA1-LAND1,
GSBER LIKE BSIK-GSBER,
REGIO LIKE KNA1-REGIO,
NAME1 LIKE KNA1-NAME1,
NAME2 LIKE KNA1-NAME2,
ORT01 LIKE KNA1-ORT01,
TELF1 LIKE KNVK-TELF1, "telephone number JAM
CONT_NAME1 LIKE KNVK-NAME1, "contact name JAM
NAMEV LIKE KNVK-NAMEV, "contact name JAM
KUNNR LIKE KNA1-KUNNR, "TONYC
BUKRS LIKE LFB1-BUKRS, "TONYC
KKBER LIKE BSID-KKBER, "tonyc issue #2500
ZTERM LIKE KNB1-ZTERM, "tonyc issue #2500
KLIMK_TXT(22) TYPE C, "credit limit JAM
WAERS LIKE T014-WAERS, "currency JAM
SORT_GSB, "TONYC
RAST1 TYPE P,
RAST2 TYPE P,
RAST3 TYPE P,
RAST4 TYPE P,
RAST5 TYPE P,
RAST6 TYPE P,
RAST7 TYPE P,
T_IND,
END OF GTAB.
DATA HOLD_NAME(40).
DATA HOLD_BUKRS LIKE T001-BUKRS. "tonyc
DATA GOOD_SUPER_REP. "tonyc
DATA: HOLD_REP LIKE KNA1-KUNNR, "tonyc
SUPER_NAME LIKE KNA1-NAME1, "tonyc
REP_NAME LIKE KNA1-NAME1. "tonyc
DATA NAME_LENGTH(2) TYPE C. "tonyc
DATA BACKSLASH(3) VALUE ' / '. "tonyc
DATA REPS_INFO(70) TYPE C. "tonyc
DATA REPORT_TYPE(12) TYPE C.
DATA: C_CREDIT_ABTNR LIKE KNVK-ABTNR. "dept 003 = credit
DATA Z_HOLD_LIMIT(22) TYPE N. "tonyc issue#2216
DATA Z_DESCRIPTION(18). "tonyc issue#2216
DATA WRITE_TOTAL.
DATA HOLD_KLIMK LIKE KNKK-KLIMK.
DATA HOLD_KLIMK2(22) TYPE C.
DATA HOLD-CTLPC LIKE KNKK-CTLPC.
DATA HOLD-CTLPC-TEXT LIKE T691T-RTEXT.
DATA HOLD_ZTERM LIKE KNVV-ZTERM.
DATA TOTAL_RAST7 TYPE P.
DATA TOTAL_RAST2 TYPE P.
DATA TOTAL_RAST3 TYPE P.
DATA TOTAL_RAST4 TYPE P.
DATA TOTAL_RAST5 TYPE P.
DATA TOTAL_RAST6 TYPE P.
DATA TOTAL_RAST1 TYPE P.
DATA HOLD_BUKRS2 LIKE T001-BUKRS.
DATA HOLD_KKBER LIKE BSID-KKBER.
DATA HOLD_KKBER_DESC LIKE T014T-KKBTX.
DATA HOLD_KKBER_DESC2 LIKE T014T-KKBTX.
DATA HOLD_KUNNR2 LIKE KNA1-KUNNR.
DATA L_FIRST_DAY_OF_FISCAL LIKE SY-DATUM. "tonyc issue #3047
DATA: STAB TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
RTOT TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
STOT TYPE TOT_TAB WITH HEADER LINE, "DEVK939546
OP,
MAXMANDT LIKE DD_STIDA,
MAXMANST TYPE P,
SUMKLIMB TYPE P,
SUMVLIBB TYPE P,
VERZUG TYPE P,
OBAD TYPE P,
BLOCK_CNT TYPE P,
INTENS,
ONEBYTE(1) TYPE C,
TAGE1A LIKE RFPDO1-ALLGFAEL,
TAGE2A LIKE RFPDO1-ALLGFAEL,
TAGE3A LIKE RFPDO1-ALLGFAEL,
HOLD_KUNNR LIKE KNA1-KUNNR, "tonyc
HOLD_SUPER LIKE KNA1-KUNNR, "tonyc
HOLD_REP2 LIKE KNA1-KUNNR, "tonyc
SUPER_REP LIKE KNA1-KUNNR, "tonyc
TEMP_TELF1 LIKE KNA1-TELF1, "JAM
IT_T014 LIKE T014 OCCURS 0 WITH HEADER LINE, "JAM
G_KLIMK_TXT LIKE GTAB-KLIMK_TXT, "JAM
G_WAERS LIKE GTAB-WAERS, "JAM
G_CONT_NAME(50) TYPE C. "JA
DATA FILL_REP_INFO.
BC SUNILP 05/14/2007
DATA: BEGIN OF ITAB_VBRP OCCURS 0.
INCLUDE STRUCTURE VBRP.
DATA: END OF ITAB_VBRP.
DATA: T_PERC TYPE F,
SUM_NETWR LIKE VBRP-NETWR.
*DATA: GTAB_LINES LIKE GTAB OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF GTAB_LINES OCCURS 0.
INCLUDE STRUCTURE GTAB.
DATA: IND(1),
OBAD TYPE P.
DATA: END OF GTAB_LINES.
DATA: BEGIN OF ITAB_VBRP1 OCCURS 0,
VBELN LIKE VBRP-VBELN,
NETWR LIKE VBRP-NETWR,
ZZMREP LIKE VBRP-ZZMREP, "Super Rep
ZZLREP LIKE VBRP-ZZLREP, "Rep
PERC TYPE F,
END OF ITAB_VBRP1.
EC SUNILP 05/14/2007
BEGIN_OF_BLOCK 2.
PARAMETERS: REGIO LIKE KNA1-REGIO.
PARAMETERS: CONSOL AS CHECKBOX. "TONYC
PARAMETERS: P_KKBER AS CHECKBOX, "TONYC
P_CONV AS CHECKBOX. "tonyc issue #3047
PARAMETERS: SUMMEN LIKE RFPDO1-ALLGSUMM,
TAGE1 LIKE RFPDO1-ALLGFAEL DEFAULT '30',
TAGE2 LIKE RFPDO1-ALLGFAEL DEFAULT '60',
TAGE3 LIKE RFPDO1-ALLGFAEL DEFAULT '90',
TAGE4 LIKE RFPDO1-ALLGFAEL DEFAULT '120'.
END_OF_BLOCK 2.
BEGIN_OF_BLOCK 3.
SELECT-OPTIONS: P_SUPREP FOR KNVP-KUNNR, "Super REP "DEVK939546
P_REP FOR KNVP-KUNNR, "SALES REP "DEVK939546
P_VKORG FOR TVKO-VKORG, "TONYC ISSUE 4743
P_LOTKZ FOR BKPF-LOTKZ. "TONYC ISSUE 4743
END_OF_BLOCK 3.
INITIALIZATION. "JAM
PERFORM LOAD_T014. "JAM
refresh dd_augdt.
clear dd_augdt.
dd_augdt-option = 'EQ'.
dd_augdt-sign = 'I'.
dd_augdt-low = ' '.
append dd_augdt.
AT SELECTION-SCREEN.
IF CONSOL = 'X'.
IF NOT P_SUPREP[] IS INITIAL. "DEVK939546
MESSAGE E999 WITH 'Consolidated report not allowed w/ Super Rep'.
ENDIF.
ENDIF.
CHECK IF THE REP INFO IS ADDED OR NOT - VS
IF NOT P_SUPREP IS INITIAL OR"TONY ISSUE 4743
NOT P_REP IS INITIAL."TONY ISSUE 4743
FILL_REP_INFO = 'X'."TONY ISSUE 4743
ENDIF."TONY ISSUE 4743
START-OF-SELECTION.
get_frame_title 2.
add function module to track usage JD 10/13/98 *****
CALL FUNCTION 'Z_RUN_LOG'
EXCEPTIONS
OTHERS = 1.
*IF NOT P_SUPREP IS INITIAL AND NOT P_REP IS INITIAL.
P_SUPREP = ' '.
*ENDIF.
GET KNA1 FIELDS LAND1 REGIO KUNNR NAME1 NAME2 ORT01 TELF1. "JAM
new-page.
skip.
TEMP_TELF1 = KNA1-TELF1.
MAXMANDT = '19000101'.
MAXMANST = 0.
SUMVLIBB = 0.
PERFORM GET_CUST_CONTACT. "JAM
Check sales rep- NES071797
Get any valid record and exit.
IF NOT p_suprep[] IS INITIAL. "DEVK939546 "TONY ISSUE 4743 start
good_super_rep = ' '.
SELECT kunn2 INTO super_rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZS' AND
kunn2 IN p_suprep.
EXIT.
ENDSELECT.
IF sy-subrc = 0.
good_super_rep = 'X'.
gtab-super = super_rep.
super_rep = ' '.
ENDIF.
CHECK good_super_rep = 'X'.
SELECT kunn2 INTO gtab-rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZR' AND
kunn2 IN p_rep.
EXIT.
ENDSELECT.
CHECK sy-subrc = 0.
ELSEIF NOT p_rep[] IS INITIAL. "DEVK939546
SELECT kunn2 INTO gtab-rep FROM knvp UP TO 1 ROWS
WHERE
kunnr = kna1-kunnr AND
parvw = 'ZR' AND
kunn2 IN p_rep.
EXIT.
ENDSELECT.
CHECK sy-subrc = 0.
ENDIF. "TONY ISSUE 4743 end
GET KNB1 FIELDS BUKRS VLIBB ZTERM. "tonyc #2500
GTAB-BUKRS = KNB1-BUKRS.
GTAB-ZTERM = KNB1-ZTERM.
SUMVLIBB = SUMVLIBB + KNB1-VLIBB.
GET KNB5.
IF KNB5-MADAT > MAXMANDT.
MAXMANDT = KNB5-MADAT.
ENDIF.
IF KNB5-MAHNS > MAXMANST.
MAXMANST = KNB5-MAHNS.
ENDIF.
SUMKLIMB = SUMKLIMB + KLIMB.
GET BSID.
CHECK BSID-BSTAT = SPACE.
field was intended for Business Area, changed to use Currency
GTAB-GSBER = BSID-WAERS.
IF P_KKBER = 'X'. "TONYC ISSUE #2500
IF BSID-KKBER = ' '.
GTAB-KKBER = BSID-BUKRS.
ELSE.
GTAB-KKBER = BSID-KKBER. "TONYC ISSUE #2500
ENDIF.
ENDIF. "TONYC ISSUE #2500
SELECT SINGLE * FROM BKPF "TONY ISSUE 4743
WHERE BUKRS = BSID-BUKRS "TONY ISSUE 4743
AND BELNR = BSID-BELNR "TONY ISSUE 4743
AND GJAHR = BSID-GJAHR. "TONY ISSUE 4743
BC SUNILP 05/14/2007
IF BKPF-XREF2_HD IS NOT INITIAL.
CHECK BKPF-XREF2_HD IN P_SUPREP. "TONY ISSUE 4743
ELSE.
IF P_REP[] IS INITIAL.
REFRESH: ITAB_VBRP, ITAB_VBRP1.
IF NOT BKPF-XBLNR IS INITIAL.
SELECT * FROM VBRP INTO ITAB_VBRP WHERE VBELN = BKPF-XBLNR.
APPEND ITAB_VBRP. CLEAR ITAB_VBRP.
ENDSELECT.
CHECK ITAB_VBRP[] IS NOT INITIAL.
CLEAR: SUM_NETWR.
LOOP AT ITAB_VBRP.
CHECK ITAB_VBRP-ZZMREP IN P_SUPREP.
CHECK ITAB_VBRP-ZZLREP IN P_REP.
MOVE-CORRESPONDING ITAB_VBRP TO ITAB_VBRP1.
COLLECT: ITAB_VBRP1.
SUM_NETWR = SUM_NETWR + ITAB_VBRP-NETWR.
CLEAR ITAB_VBRP.
ENDLOOP.
CHECK ITAB_VBRP1[] IS NOT INITIAL.
LOOP AT ITAB_VBRP1.
CLEAR: T_PERC.
T_PERC = ( ITAB_VBRP1-NETWR / SUM_NETWR ).
ITAB_VBRP1-PERC = T_PERC.
MODIFY ITAB_VBRP1 INDEX SY-TABIX TRANSPORTING PERC.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
EC SUNILP 05/14/2007
IF FILL_REP_INFO = 'X'.
GTAB-SUPER = BKPF-XREF2_HD. "TONY ISSUE 4743 "MOVE THE CONTENTS OF XREF2_HD TO GTAB INTERNAL TABLE - VS
ENDIF.
BC SUNILP 05/14/2007
IF BKPF-XREF1_HD IS NOT INITIAL.
CHECK BKPF-XREF1_HD IN P_REP. "TONY ISSUE 4743 " ELSE MOVE THE CONTENTS OF - VS
ELSE.
REFRESH: ITAB_VBRP, ITAB_VBRP1.
IF NOT BKPF-XBLNR IS INITIAL.
SELECT * FROM VBRP INTO ITAB_VBRP WHERE VBELN = BKPF-XBLNR.
APPEND ITAB_VBRP. CLEAR ITAB_VBRP.
ENDSELECT.
CHECK ITAB_VBRP[] IS NOT INITIAL.
CLEAR: SUM_NETWR.
LOOP AT ITAB_VBRP.
CHECK ITAB_VBRP-ZZMREP IN P_SUPREP.
CHECK ITAB_VBRP-ZZLREP IN P_REP.
MOVE-CORRESPONDING ITAB_VBRP TO ITAB_VBRP1.
COLLECT: ITAB_VBRP1.
SUM_NETWR = SUM_NETWR + ITAB_VBRP-NETWR.
CLEAR ITAB_VBRP.
ENDLOOP.
CHECK ITAB_VBRP1[] IS NOT INITIAL.
LOOP AT ITAB_VBRP1.
CLEAR: T_PERC.
T_PERC = ( ITAB_VBRP1-NETWR / SUM_NETWR ).
ITAB_VBRP1-PERC = T_PERC.
MODIFY ITAB_VBRP1 INDEX SY-TABIX TRANSPORTING PERC.
ENDLOOP.
ENDIF.
ENDIF.
EC SUNILP 05/14/2007
IF FILL_REP_INFO = 'X'.
GTAB-REP = BKPF-XREF1_HD. "TONY ISSUE 4743
ENDIF.
CHECK BKPF-LOTKZ IN P_LOTKZ. "TONY ISSUE 4743
CHECK BKPF-BRNCH IN P_VKORG. "TONY ISSUE 4743
SELECT SINGLE FILKD INTO GTAB-FILKD FROM BSEG
WHERE BUKRS = BSID-BUKRS
AND BELNR = BSID-BELNR
AND GJAHR = BSID-GJAHR
AND BUZEI = BSID-BUZEI.
gtab-gsber = bsid-gsber.
get rep info for each bsid record
IF NOT P_SUPREP IS INITIAL. "tonyc
SELECT KUNNR FROM VBPA INTO HOLD_REP UP TO 1 ROWS "tonyc
WHERE VBELN = BSID-VBELN "tonyc
AND PARVW = 'ZR'. "tonyc
ENDSELECT. "tonyc
IF NOT P_REP IS INITIAL. "tonyc
CHECK HOLD_REP = P_REP. "tonyc
ENDIF. "tonyc
GTAB-REP = HOLD_REP. "tonyc
HOLD_REP = ' '. "tonyc
ENDIF. "tonyc
PERFORM GET_KNKK_INFO. "JAM
GTAB-KLIMK_TXT = G_KLIMK_TXT.
GTAB-WAERS = G_WAERS.
GTAB-LAND1 = KNA1-LAND1.
GTAB-REGIO = KNA1-REGIO.
GTAB-KUNNR = KNA1-KUNNR.
GTAB-NAME1 = KNA1-NAME1.
GTAB-NAME2 = KNA1-NAME2.
GTAB-ORT01 = KNA1-ORT01.
*if there is no phone number for the contact, pull the phone
*number from the sold-to
IF KNVK-TELF1 = ' '.
GTAB-TELF1 = TEMP_TELF1.
ELSE.
GTAB-TELF1 = KNVK-TELF1. "JAM
ENDIF.
GTAB-CONT_NAME1 = KNVK-NAME1.
GTAB-NAMEV = KNVK-NAMEV.
verzug = bsega-netdt - dd_stida.
VERZUG = DD_STIDA - BSEGA-NETDT. "days past due calculation
OP = 'X'.
GTAB-RAST2 = GTAB-RAST3 = GTAB-RAST4 = 0.
GTAB-RAST5 = GTAB-RAST6 = OBAD = GTAB-RAST7 = 0.
IF VERZUG LE 0. "future due
GTAB-RAST1 = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE1. "past due 1 to tage1 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST2 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE2. "past due tage1 to tage2 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST3 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE3. "past due tage2 to tage3 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST4 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG LE TAGE4. "past due tage3 to tage4 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST5 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ELSE.
IF VERZUG GT TAGE4. "past due > tage4 days
GTAB-RAST1 = BSEGA-WRSHB.
GTAB-RAST6 = BSEGA-WRSHB.
OBAD = BSEGA-WRSHB.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
GTAB-RAST7 = GTAB-RAST1 - OBAD.
stab = gtab.
MOVE-CORRESPONDING GTAB TO STAB.
BC SUNILP 05/15/2007
IF ITAB_VBRP1[] IS NOT INITIAL.
GTAB-T_IND = 'X'.
LOOP AT ITAB_VBRP1.
MOVE-CORRESPONDING GTAB TO GTAB_LINES.
GTAB_LINES-SORT_GSB = '1'.
GTAB_LINES-SUPER = ITAB_VBRP1-ZZMREP.
GTAB_LINES-REP = ITAB_VBRP1-ZZLREP.
GTAB_LINES-RAST1 = GTAB_LINES-RAST1 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST2 = GTAB_LINES-RAST2 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST3 = GTAB_LINES-RAST3 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST4 = GTAB_LINES-RAST4 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST5 = GTAB_LINES-RAST5 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST6 = GTAB_LINES-RAST6 * ITAB_VBRP1-PERC.
GTAB_LINES-RAST7 = GTAB_LINES-RAST7 * ITAB_VBRP1-PERC.
GTAB_LINES-OBAD = GTAB_LINES-OBAD * ITAB_VBRP1-PERC.
COLLECT: GTAB_LINES.
ENDLOOP.
ELSE.
MOVE-CORRESPONDING GTAB TO GTAB_LINES.
GTAB_LINES-T_IND = 'X'.
GTAB_LINES-SORT_GSB = '1'.
IF GTAB_LINES-SUPER IN P_SUPREP OR GTAB_LINES-REP IN P_REP.
COLLECT: GTAB_LINES.
ENDIF.
ENDIF.
EC SUNILP 05/15/2007
gtab-sort_gsb = stab-sort_gsb = '0'.
collect: gtab, stab.
gtab-gsber = stab-gsber = '****'.
GTAB-SORT_GSB = '1'.
IF REGIO = SPACE OR REGIO = GTAB-REGIO.
IF GTAB_LINES-SUPER IN P_SUPREP OR GTAB_LINES-REP IN P_REP.
COLLECT: GTAB, STAB.
ENDIF.
ENDIF.
END-OF-SELECTION.
TAGE1A = TAGE1 + 1.
TAGE2A = TAGE2 + 1.
TAGE3A = TAGE3 + 1.
IF SUMMEN = ' '.
sort gtab by bukrs land1 regio kunnr gsber sort_gsb.
sort gtab by bukrs land1 regio name1 kunnr gsber sort_gsb. "JAM
IF CONSOL = 'X'.
SORT GTAB BY LAND1 REGIO NAME1 KUNNR BUKRS KKBER GSBER SORT_GSB.
"TONYC
REPORT_TYPE = 'consolidated'.
ELSEIF NOT P_SUPREP[] IS INITIAL. "DEVK939546
SORT GTAB
BY SUPER REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
BC SUNILP 05/15/2007
SORT GTAB_LINES
BY SUPER REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'super rep'.
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
ELSEIF NOT P_REP[] IS INITIAL. "DEVK939546
SORT GTAB "DEVK939546
BY REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
"DEVK939546
BC SUNILP 05/15/2007
SORT GTAB_LINES
BY REP NAME1 BUKRS KKBER LAND1 REGIO NAME1 GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'rep'. "DEVK939546
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
ELSE.
SORT GTAB BY BUKRS KKBER LAND1 REGIO NAME1 KUNNR GSBER SORT_GSB.
BC SUNILP 05/15/2007
SORT GTAB_LINES BY BUKRS KKBER LAND1 REGIO NAME1 KUNNR GSBER SORT_GSB.
EC SUNILP 05/15/2007
REPORT_TYPE = 'regular'.
ENDIF.
BC SUNILP 05/15/2007
DELETE ADJACENT DUPLICATES FROM GTAB COMPARING BUKRS NAME1.
LOOP AT GTAB_LINES.
IF P_REP[] IS INITIAL.
IF GTAB_LINES-SUPER NOT IN P_SUPREP.
DELETE GTAB_LINES.
ENDIF.
ELSE.
IF GTAB_LINES-SUPER NOT IN P_SUPREP OR GTAB_LINES-REP NOT IN P_REP.
DELETE GTAB_LINES.
ENDIF.
ENDIF.
ENDLOOP.
LOOP AT GTAB.
READ TABLE GTAB_LINES WITH KEY BUKRS = GTAB-BUKRS
NAME1 = GTAB-NAME1.
IF SY-SUBRC NE '0'.
DELETE GTAB.
ENDIF.
ENDLOOP.
EC SUNILP 05/15/2007
LOOP AT GTAB.
MOVE GTAB-BUKRS TO T001-BUKRS. READ TABLE T001.
RESERVE 5 LINES.
CASE REPORT_TYPE.
WHEN 'regular'.
IF HOLD_BUKRS <> GTAB-BUKRS.
IF SY-TABIX > 1. "TONYC
NEW-PAGE. SKIP. "TONYC
ENDIF. "TONYC
ENDIF.
PERFORM WRITE_CUST_INFO. "TONYC
PERFORM WRITE_DETAIL.
hold_bukrs = gtab-bukrs. "tonyc
WHEN 'consolidated'.
IF HOLD_KUNNR <> GTAB-KUNNR. "TONYC
PERFORM WRITE_CUST_INFO. "TONYC
ENDIF. "TONYC
HOLD_KUNNR = GTAB-KUNNR. "TONYC
PERFORM WRITE_DETAIL.
WHEN 'super rep'.
IF GTAB-T_IND NE 'X'.
BC SUNILP 05/22/2007
READ TABLE GTAB_LINES WITH KEY BUKRS = GTAB-BUKRS
NAME1 = GTAB-NAME1.
EC SUNILP 05/22/2007
IF ( HOLD_SUPER <> GTAB_LINES-SUPER ) OR
( HOLD_REP2 <> GTAB_LINES-REP ).
NEW-PAGE.
PERFORM GET_AND_WRITE_SUPERINFO.
ENDIF.
HOLD_REP2 = GTAB_LINES-REP.
HOLD_SUPER = GTAB_LINES-SUPER.
IF HOLD_KUNNR <> GTAB-KUNNR. "TONYC
WRITE :/. "TONYC
ULINE. "TONYC
PERFORM WRITE_CUST_INFO. "TONYC
ENDIF. "TONYC
HOLD_KUNNR = GTAB-KUNNR. "TONYC
PERFORM WRITE_DETAIL. "TONYC
AT END OF REP. "DEVK939546
SKIP. "DEVK939546
RESERVE 7 LINES. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Rep:', "DEVK939546
GTAB-REP, '/', REP_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES RTOT. "DEVK939546
REFRESH RTOT. "DEVK939546
ENDAT. "DEVK939546
AT END OF SUPER. "DEVK939546
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
NEW-PAGE. SKIP. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Super Rep:', "DEVK939546
GTAB-SUPER, '/', SUPER_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES STOT. "DEVK939546
REFRESH STOT. "DEVK939546
ENDAT. "DEVK939546
ELSE.
LOOP AT GTAB_LINES WHERE BUKRS = GTAB-BUKRS
AND NAME1 = GTAB-NAME1.
IF ( HOLD_SUPER <> GTAB_LINES-SUPER ) OR
( HOLD_REP2 <> GTAB_LINES-REP ).
NEW-PAGE.
PERFORM GET_AND_WRITE_SUPERINFO.
ENDIF.
HOLD_REP2 = GTAB_LINES-REP.
HOLD_SUPER = GTAB_LINES-SUPER.
IF HOLD_KUNNR <> GTAB_LINES-KUNNR.
WRITE :/.
ULINE.
PERFORM WRITE_CUST_INFO.
ENDIF.
HOLD_KUNNR = GTAB_LINES-KUNNR.
PERFORM WRITE_DETAIL.
AT END OF REP.
SKIP.
RESERVE 7 LINES.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE: / 'Summary for Rep:',
GTAB_LINES-REP, '/', REP_NAME, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES RTOT.
REFRESH RTOT.
ENDAT.
AT END OF SUPER.
CLEAR STAB. "tonyc 03/06/2004
REFRESH STAB. "tonyc 03/06/2004
NEW-PAGE. SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE: / 'Summary for Super Rep:',
GTAB_LINES-SUPER, '/', SUPER_NAME, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES STOT.
REFRESH STOT.
ENDAT.
ENDLOOP.
ENDIF.
WHEN 'rep'. "DEVK939546
LOOP AT GTAB_LINES WHERE BUKRS = GTAB-BUKRS
AND NAME1 = GTAB-NAME1.
IF HOLD_REP2 <> GTAB_LINES-REP. "DEVK939546
NEW-PAGE. "DEVK939546
PERFORM GET_AND_WRITE_REPINFO. "DEVK939546
ENDIF. "DEVK939546
HOLD_REP2 = GTAB_LINES-REP. "DEVK939546
IF HOLD_KUNNR <> GTAB_LINES-KUNNR. "DEVK939546
WRITE :/. "DEVK939546
ULINE. "DEVK939546
PERFORM WRITE_CUST_INFO. "DEVK939546
ENDIF. "DEVK939546
HOLD_KUNNR = GTAB_LINES-KUNNR. "DEVK939546
PERFORM WRITE_DETAIL. "DEVK939546
AT END OF REP. "DEVK939546
SKIP. "DEVK939546
RESERVE 7 LINES. "DEVK939546
FORMAT COLOR COL_TOTAL INTENSIFIED. "DEVK939546
WRITE: / 'Summary for Rep:', "DEVK939546
GTAB_LINES-REP, '/', REP_NAME, 132 ONEBYTE."DEVK939546
PERFORM WRITE_TOTS TABLES RTOT. "DEVK939546
REFRESH RTOT. "DEVK939546
ENDAT. "DEVK939546
ENDLOOP.
ENDCASE.
ENDLOOP.
ENDIF.
OP = ' '.
REFRESH GTAB.
IF NOT REPORT_TYPE = 'super rep'.
ULINE.
ENDIF.
SKIP 1.
IF SUMMEN = ' '. "if 'output totals only' bypass new-page
NEW-PAGE. SKIP.
ENDIF.
WRITE: /25 TEXT-030, 132 ONEBYTE, /25 TEXT-031, 132 ONEBYTE.
PERFORM WRITE_TOTS TABLES STAB. "DEVK939546
TOP-OF-PAGE.
INTENS = SPACE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE: / SY-VLINE, 1 TEXT-001, DD_STIDA, 75 TEXT-051, 132 SY-VLINE.
ULINE.
WRITE: / SY-VLINE, 13 SY-VLINE, 30 SY-VLINE,
47 SY-VLINE, 58 TEXT-003, 81 SY-VLINE,
92 TEXT-003, 115 SY-VLINE, 118 TEXT-003, 132 SY-VLINE,
/ SY-VLINE, 02 TEXT-004, 13 SY-VLINE, TEXT-002,
30 SY-VLINE, 32 TEXT-018, 47 SY-VLINE,
50 '1', 54 TEXT-040, 57 TAGE1, 64 SY-VLINE, " 65 tage2,
67 TAGE1A, 72 TEXT-040, 75 TAGE2,
81 SY-VLINE, 83 TAGE2A, 89 TEXT-040, 91 TAGE3, 98 SY-VLINE,
101 TAGE3A, 107 TEXT-040, 110 TAGE4, 115 SY-VLINE,
117 TAGE4, 123 TEXT-017, 132 SY-VLINE.
ULINE.
SKIP 1.
SUMMARY.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
FORM write_tots *
--> PTAB *
FORM WRITE_TOTS TABLES PTAB TYPE TOT_TAB. "DEVK939546
CLEAR INTENS. "DEVK939546
FORMAT COLOR COL_HEADING INTENSIFIED OFF. "DEVK939546
IF P_CONV = 'X'. "tonyc issue #3047 begin
WRITE /4 TEXT-101.
WRITE: /4 TEXT-102,
50 TEXT-100.
ENDIF. "tonyc issue #3047 end
ULINE. "DEVK939546
SORT PTAB BY BUKRS GSBER. "DEVK939546
LOOP AT PTAB. "DEVK939546
IF SY-TABIX > 1.
WRITE_TOTAL = 'X'.
ENDIF.
MOVE PTAB-BUKRS TO T001-BUKRS. READ TABLE T001. "DEVK939546
MOVE PTAB-GSBER TO T001-WAERS. "DEVK939546
IF P_CONV = 'X'. "tonyc issue #3047 begin
PERFORM CONVERT_VALUES USING STAB-RAST1
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST2
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST3
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST4
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST5
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST6
STAB-GSBER.
PERFORM CONVERT_VALUES USING STAB-RAST7
STAB-GSBER.
ENDIF. "TOnyc issue #3047 end
MOVE-CORRESPONDING PTAB TO STAB.
COLLECT STAB.
IF P_KKBER = 'X'. "TONYC ISSUE #2500
CLEAR HOLD_KKBER_DESC2.
SELECT SINGLE KKBTX INTO HOLD_KKBER_DESC2 FROM T014T
WHERE KKBER = STAB-KKBER AND
SPRAS = 'E'.
IF SY-SUBRC <> '0'.
HOLD_KKBER_DESC2 = 'Undetermined'.
ENDIF.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 6 STAB-GSBER, HOLD_KKBER_DESC2, SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
IF P_CONV = 'X'. "tonyc issue #3047 begin
T001-WAERS = 'USD'.
ENDIF. "tonyc issue #3047 end
WRITE: 13 STAB-RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) STAB-RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
HOLD_BUKRS2 = STAB-BUKRS. "TONYC ISSUE #2500
ULINE.
FORMAT COLOR OFF.
TOTAL_RAST1 = STAB-RAST1 + TOTAL_RAST1.
TOTAL_RAST2 = STAB-RAST2 + TOTAL_RAST2.
TOTAL_RAST3 = STAB-RAST3 + TOTAL_RAST3.
TOTAL_RAST4 = STAB-RAST4 + TOTAL_RAST4.
TOTAL_RAST5 = STAB-RAST5 + TOTAL_RAST5.
TOTAL_RAST6 = STAB-RAST6 + TOTAL_RAST6.
TOTAL_RAST7 = STAB-RAST7 + TOTAL_RAST7.
ELSE.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF. "DEVK939546
IF INTENS = SPACE. "DEVK939546
FORMAT COLOR COL_NORMAL INTENSIFIED OFF. "DEVK939546
INTENS = 'X'. "DEVK939546
ELSE. "DEVK939546
FORMAT COLOR COL_NORMAL INTENSIFIED ON. "DEVK939546
INTENS = SPACE. "DEVK939546
ENDIF. "DEVK939546
WRITE: / SY-VLINE, PTAB-BUKRS, PTAB-GSBER, SY-VLINE, "DEVK939546
(14) PTAB-RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,"DEVK939546
(14) PTAB-RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE."DEVK939546
TOTAL_RAST1 = STAB-RAST1 + TOTAL_RAST1.
TOTAL_RAST2 = STAB-RAST2 + TOTAL_RAST2.
TOTAL_RAST3 = STAB-RAST3 + TOTAL_RAST3.
TOTAL_RAST4 = STAB-RAST4 + TOTAL_RAST4.
TOTAL_RAST5 = STAB-RAST5 + TOTAL_RAST5.
TOTAL_RAST6 = STAB-RAST6 + TOTAL_RAST6.
TOTAL_RAST7 = STAB-RAST7 + TOTAL_RAST7.
ENDIF.
ENDLOOP. "DEVK939546
ULINE. "DEVK939546
IF P_KKBER = 'X'. "TONYC ISSUE #2500
IF P_CONV = 'X'. "tonyc issue #3047 begin
FORMAT COLOR OFF.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: SY-VLINE,
6 'TOTAL ', SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 13 TOTAL_RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
ULINE.
ENDIF. "tonyc issue #3047 end
ELSE.
IF P_CONV = 'X'.
FORMAT COLOR OFF.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: SY-VLINE,
6 'TOTAL ', SY-VLINE.
ULINE.
FORMAT COLOR OFF.
WRITE: / SY-VLINE.
FORMAT COLOR COL_HEADING INTENSIFIED OFF.
WRITE: 13 TOTAL_RAST1 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST7 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST2 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST3 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST4 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST5 NO-ZERO CURRENCY T001-WAERS, SY-VLINE,
(14) TOTAL_RAST6 NO-ZERO CURRENCY T001-WAERS, SY-VLINE.
ULINE.
ENDIF.
ENDIF.
SKIP 1. "DEVK939546
ENDFORM. "DEVK939546
*& Form GET_KNKK_INFO
text
--> p1 text
<-- p2 text
FORM GET_KNKK_INFO.
CLEAR: G_WAERS,
G_KLIMK_TXT,
KNKK-KLIMK.
get credit control area (KKBER) for comp code (BUKRS)
SELECT SINGLE KLIMK
INTO KNKK-KLIMK
FROM KNKK
WHERE KUNNR = KNA1-KUNNR AND
KKBER = T001-KKBER.
IF SY-SUBRC = 0.
get currency for cred ctrl area
CLEAR IT_T014.
READ TABLE IT_T014 WITH KEY KKBER = T001-KKBER BINARY SEARCH.
G_WAERS = IT_T014-WAERS.
WRITE KNKK-KLIMK TO G_KLIMK_TXT CURRENCY G_WAERS.
ENDIF.
ENDFORM. " GET_KNKK_INFO
*& Form SELECT_KNKK
text
-->P_KKBER Credit Limit Controlling Area
<--P_FOUND_KNKK Indicates if record found
FORM SELECT_KNKK USING P_KKBER
CHANGING P_FOUND_KNKK.
CLEAR: G_WAERS,
G_KLIMK_TXT,
KNKK-KLIMK.
SELECT SINGLE KLIMK
INTO KNKK-KLIMK
FROM KNKK
WHERE KUNNR = KNA1-KUNNR AND
KKBER = P_KKBER.
IF SY-SUBRC = 0.
P_FOUND_KNKK = C_TRUE.
get currency for cred ctrl area
CLEAR IT_T014.
READ TABLE IT_T014 WITH KEY KKBER = P_KKBER BINARY SEARCH.
G_WAERS = IT_T014-WAERS.
WRITE KNKK-KLIMK TO G_KLIMK_TXT CURRENCY G_WAERS.
ELSE.
P_FOUND_KNKK = C_FALSE.
ENDIF.
ENDFORM. " SELECT_KNKK
*& Form GET_CUST_CONTACT & PHONE NUMBER
FORM GET_CUST_CONTACT.
CLEAR KNVK.
C_CREDIT_ABTNR = '0003'. "look for contact in credit dept
SELECT NAME1
NAMEV
TELF1
INTO (KNVK-NAME1,
KNVK-NAMEV,
KNVK-TELF1)
FROM KNVK
WHERE KUNNR = KNA1-KUNNR AND
ABTNR = C_CREDIT_ABTNR.
ENDSELECT.
If there wasn't a contact person for the credit dept, then just
pull up the first contact info we find regardless of dept
IF SY-SUBRC <> 0.
CLEAR KNVK.
SELECT NAME1
NAMEV
TELF1
INTO (KNVK-NAME1,
KNVK-NAMEV,
KNVK-TELF1)
FROM KNVK
WHERE KUNNR = KNA1-KUNNR.
IF SY-SUBRC = 0.
EXIT.
ENDIF.
ENDSELECT.
ELSE.
EXIT.
ENDIF. "not contact found in credit dept.
ENDFORM. " GET_CUST_CONTACT
*& Form LOAD_T014
FORM LOAD_T014.
SELECT *
INTO TABLE IT_T014
FROM T014.
SORT IT_T014.
ENDFORM. " LOAD_T014
*& Form WRITE_CUST_INFO "TONYC
text moved code and created a form. for cleaner code "TONYC
--> p1 text
<-- p2 text
FORM WRITE_CUST_INFO.
IF NOT REPORT_TYPE = 'super rep'.
IF SY-TABIX > 1.
ULINE.
ENDIF.
ENDIF.
CONCATENATE GTAB-NAMEV "JAM
GTAB-CONT_NAME1
INTO G_CONT_NAME
SEPARATED BY SPACE.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
IF REPORT_TYPE = 'super rep'.
IF GTAB-T_IND NE 'X'.
WRITE: / GTAB-KUNNR, GTAB-NAME1, GTAB-ORT01, GTAB-REGIO, GTAB-LAND1,
"g_cont_name,
132 ONEBYTE.
ELSE.
WRITE: / GTAB_LINES-KUNNR, GTAB_LINES-NAME1, GTAB_LINES-ORT01, GTAB_LINES-REGIO, GTAB_LINES-LAND1,
"g_cont_name,
132 ONEBYTE.
ENDIF.
WRITE: /21 onebyte, 12 gtab-name2, 45 gtab-ort01,
gtab-telf1, "gtab-klimk_txt, gtab-waers.
132 onebyte.
ELSE.
WRITE: / GTAB-KUNNR, GTAB-NAME1, GTAB-ORT01, GTAB-REGIO, GTAB-LAND1,
"g_cont_name, "JAM
132 ONEBYTE.
WRITE: /11 onebyte, 12 gtab-name2, 45 gtab-ort01,
gtab-telf1, "gtab-klimk_txt, gtab-waers, "JAM
132 onebyte.
ENDIF.
ENDFORM. " WRITE_CUST_INFO
*& Form GET_AND_WRITE_SUPERINFO
text
--> p1 text
<-- p2 text
FORM GET_AND_WRITE_SUPERINFO.
ULINE.
IF GTAB-T_IND NE 'X'.
SELECT SINGLE NAME1 FROM KNA1 INTO SUPER_NAME "TONYC
WHERE KUNNR = GTAB-SUPER. "TONYC
SELECT SINGLE NAME1 FROM KNA1 INTO REP_NAME "TONYC
WHERE KUNNR = GTAB-REP. "TONYC
CONCATENATE SUPER_NAME REP_NAME INTO REPS_INFO "TONYC
SEPARATED BY BACKSLASH. "TONYC
FORMAT COLOR COL_TOTAL INTENSIFIED. "TONYC
WRITE:/ GTAB-SUPER, '/', "TONYC
GTAB-REP, "TONYC
25 REPS_INFO, 132 ONEBYTE. "TONYC
ELSE.
SELECT SINGLE NAME1 FROM KNA1 INTO SUPER_NAME
WHERE KUNNR = GTAB_LINES-SUPER.
SELECT SINGLE NAME1 FROM KNA1 INTO REP_NAME
WHERE KUNNR = GTAB_LINES-REP.
CONCATENATE SUPER_NAME REP_NAME INTO REPS_INFO
SEPARATED BY BACKSLASH.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE:/ GTAB_LINES-SUPER, '/',
GTAB_LINES-REP,
25 REPS_INFO, 132 ONEBYTE.
ENDIF.
ENDFORM. " GET_AND_WRITE_SUPERINFO
*& Form GET_AND_WRITE_REPINFO
text
--> p1 text
<-- p2 text
FORM GET_AND_WRITE_REPINFO.
ULINE.
SELECT SINGLE NAME1 FROM KNA1 INTO REP_NAME
WHERE KUNNR = GTAB-REP.
FORMAT COLOR COL_TOTAL INTENSIFIED.
WRITE:/ GTAB-REP,
25 REP_NAME, 132 ONEBYTE.
ENDFORM. " GET_AND_WRITE_REPINFO
*& Form WRITE_DETAIL
text
--> p1 text
<-- p2 text
FORM WRITE_DETAIL.
clear z_description. "TONYC #2216
move GTAB-KLIMK_TXT to z_hold_limit.
IF z_hold_limit = 400.
z_description = 'COD/Check'.
elseif z_hold_limit = 500.
z_description = 'COD/Cash'.
elseif z_hold_limit = 600.
z_description = 'Need Dealer Agree'.
elseif z_hold_limit = 700.
z_description = 'Need PDCs'.
elseif z_hold_limit = 800.
z_description = 'Need Fin Statements'.
elseif z_hold_limit = 900.
z_description = 'Past Due Balance'.
elseif z_hold_limit = 1000.
z_description = 'Miracle?'.
endif. "TONYC #2216
MOVE GTAB-GSBER TO T001-WAERS.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
IF HOLD_KUNNR2 <> GTAB-KUNNR. "TONYC
IF REPORT_TYPE = 'super rep'.
WRITE: /3 ONEBYTE, GTAB-BUKRS.
WRITE: 92 gtab-klimk_txt, gtab-waers, 132 onebyte. "TONYC
WRITE: 92 gtab-klimk_txt, z_description,132 onebyte."TONYC #2500
ELSE.
WRITE: / ONEBYTE, GTAB-BUKRS.
WRITE: 92 gtab-klimk_txt, z_description,132 onebyte."TONYC #2500
WRITE: 92 gtab-klimk_txt, gtab-waers, 132 onebyte. "TONYC
ENDIF.
ENDIF.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
IF P_KKBER = 'X'. "TONYC ISSUE# 2500
CLEAR HOLD_KKBER_DESC.
SELECT SINGLE KKBTX INTO HOLD_KKBER_DESC FROM T014T
WHERE KKBER = GTAB-KKBER AND
SPRAS = 'E'.
IF SY-SUBRC <> '0'.
HOLD_KKBER_DESC = 'Undetermined'.
ENDIF.
SELECT SINGLE KLIMK CTLPC
INTO (HOLD_KLIMK, HOLD-CTLPC)
FROM KNKK
WHERE KUNNR = GTAB-KUNNR AND
KKBER = GTAB-KKBER.
SELECT SINGLE RTEXT INTO HOLD-CTLPC-TEXT FROM T691T
WHERE SPRAS = 'EN' AND
CTLPC = HOLD-CTLPC AND
KKBER = GTAB-KKBER.
WRITE HOLD_KLIMK TO HOLD_KLIMK2 CURRENCY GTAB-WAERS.
WRITE: /7 GTAB-KKBER,
12 HOLD_KKBER_DESC,
80 HOLD_KLIMK2,
103 GTAB-GSBER,
108 HOLD-CTLPC-TEXT.
ENDIF. "TONYC ISSUE# 2500
FORMAT COLOR COL_NORMAL INTENSIFIED ON. "TONYC
MOVE STAB-GSBER TO T001-WAERS.
CLEAR HOLD_NAME.
SELECT SINGLE NAME1 FROM KNA1 INTO HOLD_NAME
WHERE KUNNR = GTAB-FILKD.
WRITE: /15 GTAB-FILKD,
30 HOLD_NAME.
IF GTAB-T_IND NE 'X'.
WRITE: /15(14) GTAB-RAST1 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST7 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST2 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST3 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST4 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST5 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB-RAST6 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
132 ONEBYTE.
ELSE.
IF REPORT_TYPE NE 'super rep'.
LOOP AT GTAB_LINES WHERE KUNNR = GTAB-KUNNR.
WRITE: / GTAB_LINES-SUPER, ONEBYTE,
15(14) GTAB_LINES-RAST1 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST7 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST2 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST3 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST4 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST5 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST6 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
132 ONEBYTE.
ENDLOOP.
ELSE.
WRITE: / GTAB_LINES-SUPER, ONEBYTE,
15(14) GTAB_LINES-RAST1 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST7 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST2 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST3 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST4 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST5 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
(14) GTAB_LINES-RAST6 NO-ZERO CURRENCY T001-WAERS, ONEBYTE,
132 ONEBYTE.
ENDIF.
ENDIF.
HOLD_BUKRS = GTAB-BUKRS. "Tonyc
HOLD_KUNNR2 = GTAB-KUNNR. "TONYC
HOLD_KKBER = GTAB-KKBER. "TONYC ISSUE #2500
IF REPORT_TYPE = 'super rep' OR REPORT_TYPE = 'rep'. "DEVK939546
IF GTAB-T_IND NE 'X'.
MOVE-CORRESPONDING GTAB TO RTOT. "DEVK939546
COLLECT RTOT. "DEVK939546
ELSE.
MOVE-CORRESPONDING GTAB_LINES TO RTOT.
COLLECT RTOT.
ENDIF.
IF REPORT_TYPE = 'super rep'. "DEVK939546
IF GTAB-T_IND NE 'X'.
MOVE-CORRESPONDING GTAB TO STOT. "DEVK939546
COLLECT STOT. "DEVK939546
ELSE.
MOVE-CORRESPONDING GTAB_LINES TO STOT.
COLLECT STOT.
ENDIF.
ENDIF. "DEVK939546
ENDIF. "DEVK939546
ENDFORM. " WRITE_DETAIL
*& Form convert_values
text
-->P_STAB_RAST1 text
-->P_STAB_GSBER text
FORM CONVERT_VALUES USING P_STAB_RAST1 "tonyc issue #3047 begin
P_STAB-GSBER.
CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'
EXPORTING
CLIENT = SY-MANDT
DATE = SY-DATUM
FOREIGN_AMOUNT = P_STAB_RAST1
FOREIGN_CURRENCY = P_STAB-GSBER
LOCAL_CURRENCY = 'USD'
RATE = 0
TYPE_OF_RATE = 'M'
READ_TCURR = 'X'
IMPORTING
EXCHANGE_RATE =
FOREIGN_FACTOR =
LOCAL_AMOUNT = P_STAB_RAST1
LOCAL_FACTOR =
EXCHANGE_RATEX =
FIXED_RATE =
DERIVED_RATE_TYPE =
EXCEPTIONS
NO_RATE_FOUND = 1
OVERFLOW = 2
NO_FACTORS_FOUND = 3
NO_SPREAD_FOUND = 4
DERIVED_2_TIMES = 5
OTHERS = 6 .
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " convert_values

solved

Inactive Customer Report/ Customer who has done transaction

Hi All.
I need to created report for customer who has done any transaction in last 2 years, please suggest me way to achieve this
Thanks
Prem

Hi ,
which is the Idea given by our collegue it is ok,
But there you can keep all the objects data.
so you can try in this way
take the info object ( ocustomer) and take the cube ( where you are getting the transactional daat of that customers)
keep left side the 0customer object and right side info cube and create teh infoset with left outer join
here you can get the all the customer detials based on the masetr data , and which are c ustomers are done business for thenm transactional data will come.
now in query where the value <0 condtion , you can keep , it shows onle who are not done businees .
Thansk & Regarsd,
sathish

Panic report, need help diagnosing

Hello all,
I have a mid 2007 iMac that is randomly crashing. Started locking up about a week ago and now I am getting the following kernel panic report. Need some help troubleshooting if possible:
Anonymous UUID:       2FE323A8-17EC-CDE3-8419-BE69D9F5B109
Thu Apr 9 15:04:23 2015
*** Panic Report ***
panic(cpu 1 caller 0xffffff801fdc1694): "launchd died\nState at Last Exception:\n\n"@/SourceCache/xnu/xnu-2782.10.73/bsd/kern/kern_exit.c:361
Backtrace (CPU 1), Frame : Return Address
0xffffff802713be50 : 0xffffff801f92fe41
0xffffff802713bed0 : 0xffffff801fdc1694
0xffffff802713bf40 : 0xffffff801fdc135c
0xffffff802713bf50 : 0xffffff801fe4b386
0xffffff802713bfb0 : 0xffffff801fa36e86
BSD process name corresponding to current thread: launchd
Mac OS version:
14C1514
Kernel version:
Darwin Kernel Version 14.1.0: Thu Feb 26 19:26:47 PST 2015; root:xnu-2782.10.73~1/RELEASE_X86_64
Kernel UUID: 270413F7-3B44-3602-894F-AC0D392FCF8E
Kernel slide:     0x000000001f600000
Kernel text base: 0xffffff801f800000
__HIB text base: 0xffffff801f700000
System model name: iMac7,1 (Mac-F4238CC8)
System uptime in nanoseconds: 18754083958130
last loaded kext at 18212373256450: com.apple.macos.driver.AppleUSBEthernetHost 7.0 (addr 0xffffff7fa1eaa000, size 28672)
last unloaded kext at 18505555206074: com.apple.macos.driver.AppleUSBEthernetHost 7.0 (addr 0xffffff7fa1eaa000, size 20480)
loaded kexts:
com.apple.filesystems.smbfs 3.0.0
com.apple.driver.AudioAUUC 1.70
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.3.2f6
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.driver.AppleHDA 269.25
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleBacklight 170.5.0
com.apple.iokit.CSRBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.driver.AppleMCCSControl 1.2.11
com.apple.kext.AMDFramebuffer 1.3.0
com.apple.ATIRadeonX2000 10.0.0
com.apple.kext.AMD2400Controller 1.3.0
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.AppleIRController 327.5
com.apple.iokit.SCSITaskUserClient 3.7.3
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.7.0
com.apple.driver.AppleUSBHub 705.4.2
com.apple.iokit.AppleYukon2 3.2.3b1
com.apple.driver.AirPortBrcm43224 700.36.24
com.apple.driver.AppleFWOHCI 5.5.2
com.apple.driver.AppleAHCIPort 3.1.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 269.25
com.apple.kext.OSvKernDSPLib 1.15
com.apple.driver.AppleHDAController 269.25
com.apple.iokit.IOHDAFamily 269.25
com.apple.iokit.IOAudioFamily 203.3
com.apple.vecLib.kext 1.2.0
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.iokit.IOSurface 97.0.1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.driver.IOPlatformPluginFamily 5.8.1d38
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.2f6
com.apple.iokit.IOBluetoothFamily 4.3.2f6
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.kext.AMDSupport 1.3.0
com.apple.AppleGraphicsDeviceControl 3.8.6
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleUSBHIDMouse 185.3
com.apple.driver.AppleHIDMouse 185.3
com.apple.driver.AppleUSBHIDKeyboard 176.2
com.apple.driver.AppleHIDKeyboard 176.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.3
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.3
com.apple.iokit.IO80211Family 710.55
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOFireWireFamily 4.5.6
com.apple.iokit.IOAHCIFamily 2.7.5
com.apple.iokit.IOATAFamily 2.5.3
com.apple.iokit.IOUSBFamily 710.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 396
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2 GHz, 4 GB, SMC 1.20f4
Graphics: ATI Radeon HD 2400 XT, ATI,RadeonHD2400, PCIe, 128 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F9B0000, -
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F9B0000, -
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.16)
Bluetooth: Version 4.3.2f6 15235, 3 services, 26 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Crucial_CT256MX100SSD1, 256.06 GB
Parallel ATA Device: MATSHITADVD-R   UJ-85J
USB Device: Built-in iSight
USB Device: Keyboard Hub
USB Device: Apple Optical USB Mouse
USB Device: Apple Keyboard
USB Device: IR Receiver
USB Device: ID TECH ValueMag USB-HID Keyboard Reader̐
USB Device: Bluetooth USB Host Controller
USB Device: Star TSP143ECO
Thunderbolt Bus:

That type of panic seems to be caused in some cases by starting up an older Mac from a third-party SSD. Check the SSD manufacturer's website for a firmware update.
It can also be caused by faulty or incompatible memory, or sometimes (perhaps) by a malfunctioning peripheral.
The panic is not caused by software.

Can't create Word Document report - need help

Hi,
I have been trying to create a report using a word document. I downloaded an example from ni.com that has Export_Info.vi. When I try to run it I get this error:
Error 1003 occurred at Open VI Reference in New Report.vi->Export_Info.vi
I traced the error back to New Report.vi which is a VI that comes with the LabView package. There is a Open VI reference that when it tries to open Word_Open.vi gives an error. So for some reason I can not open Word_Open.vi without an error, and it comes with the Report generation office library.
Does anyone know what could the problem be?
I tried reinstalling everything and i still keep getting the same error. This makes it impossible to create a report now.
Any help would be VERY appreciated.
Thank you

Yes I have it installed. When I went to open up Word_Open.vi it opened with an error and it said that the property was not valid.
I attached a screenshot of the block diagram for Wor_Open.vi with an error message.
Thank you
Attachments:
word open.jpg ‏115 KB

Hyperion Financial Reporting - Need Help

Hello Experts,
Currently I am working on to create new Financial reports in Financial Reporting Studio. I am very new to Reporting and trying to create new reports, was able to modify existing reports, but facing problems while creating new reports.
If anyone of you have any documents or reference guides, Could you please pass it to me so that i can go through it and familiar with Financial reporting. Your help in this matter is greatly appreciated.
Thank you in advance..... Please pass me to [email protected]
Regards,
Anil

The FR User guide is the first one I'd recommend:
- called "Studio User’s Guide" under the "Oracle Hyperion Financial Reporting, Fusion Edition" heading.
http://download.oracle.com/docs/cd/E12825_01/nav/portal_4.htm
This gives a basic overview to most tasks and some advanced ones too.
This assumes you're on the latest release, otherwise other docs can be found through here:
http://www.oracle.com/technetwork/middleware/performance-management/documentation/index.html
Cheers, Iain

AICC reporting need help

I have about 24 captivate swf files. I need them to report
back to Saba, it is AICC output.
First can multiple "movies" report back to the same quiz
objective ID
Second how do you create the csf file.
I have reviewed the
http://sdc.shockwave.com/devnet/captivate/articles/output_aicc.html
but still not clear about the csf file and how it is
utilized.

The FR User guide is the first one I'd recommend:
- called "Studio User’s Guide" under the "Oracle Hyperion Financial Reporting, Fusion Edition" heading.
http://download.oracle.com/docs/cd/E12825_01/nav/portal_4.htm
This gives a basic overview to most tasks and some advanced ones too.
This assumes you're on the latest release, otherwise other docs can be found through here:
http://www.oracle.com/technetwork/middleware/performance-management/documentation/index.html
Cheers, Iain

OIM with BI reports, need help

Hi, I am new in OIM!
I want to use OIM reports for BIP. In OIM you can determine which default reports a particular user can access.
How can I do it in BIP?
As I have understand form documentation, in BIP you can determine user access to subset of folders, but not to a particular report.
Thanks in advance.

and one frame is dummy and other frame has big X
line on it with conditions. Is this a right way to
create check box! Please help thanks!Instead of creating a frame for X, you can create Ractangle and place X in it. Rest is fine.

Inactive Customer Report - need help!

Similar Messages

Maybe you are looking for