Inactive data source

hi,
how can i make an active data source as inactive in lbwe.
plz help me.
regards,
SK

Hi Yunus,
Just goto LBWE.Search for your datasource.If your data source is Active you will find "Active".Just click on that.It will turn into Inactive.
Hope this helps
Regards
Karthik

Similar Messages

Active version of BW Data Source Dev Appears inactive in Q

Hi All,
This is urgent..needs to move to prod today but I am stuck in D still!
Does anyone know why a particular BW data source which is active inn Dev might appear to be inactive in Q after the transport?
We tried manual replication, transporting replica and reapplying the transports, recollecting the data source in both r3 and BW
I also verified that I am collecting the active version in my transport
Thanks,
DB
Points will be assigned if I can get rid of this issue!
Edited by: Darshana on Jul 14, 2008 7:34 PM
Edited by: Darshana on Jul 14, 2008 7:34 PM

Hello Darshana,
Make sure the appropriate "Conversion of Source System names after transport" are maintained in target system QA and Prod.
RSA1 > Tools >...
Darshana,
Follow the above path...Go to Datawarehousing Workbench in QA tcode RSA1 and on the top you will see Tools > and follow from there...
Hope this helps....
Edited by: Chetanya Thanneer on Jul 14, 2008 10:15 PM

Data Source is in Inactive state while replicate datasource in BI 7.0

Hello,
When I replicate the datasource ZW_MAT_PLANT(My own data source which is combination of MARA and MARC) in RSA1-Datasources it is coming by default in inactive mode. In this inactive mode i can not delete this data source assignment adn i can not go inside this data source. While i click change icon to go inside the datasource it is giving me the error like you have no authorization for this datasource.
But from SU53 screen shot i have authorization for this.
Please help me in this.
Thanks and Best Regards,
Anitha Sukhaavsi

Hi,
I am facing the same issue. Did you get the solution for this?
Thanks,
Pal

Data source inactive in the quality system

Hi all,
I transported R/3 datasource from DEV to QA and replicated datasource in to BWQ but the datasource in QA is inactive eventhough it is in active mode in R/3 QA system. When I checked the RSOLTPSOURCE table there is no entry for my datasource. When i try to transport the transfer rules it is giving error 'DataSource xxxxxxxx does not exist in source system XYZ of version A'. How to activate the datasource in BW quality system.
Could any one help me to resolve this issue.
Thanks in advance.
Mandadi

Hi,
Firstly nly the active data sources in the source system will be available for useing in the bw.
R/3 check whether the datasource is active or not. If not active activateit.
If active , on the bw side replicate that particular datasource. and activate it again through program <b>RS_TRANSTRU_ACTIVATE_ALL</b>
Hope this helps
Janardhan Kumar

Data source active/inactive button grayed out in LBWE

Hello,
When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
Thanks,
KK

Hi Kumar,
The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now the status for data source in LBWE will become yellow and activate/deactivate will enable.
Regards,
Kams

SQL Interface - Error in Loading the data from SQL data source

Hello,
We have been using SQl data source for loading the dimensions and the data for so many years. Even using Essbase 11.1.1.0, it's been quite a while (more than one year). For the past few days,we are getting the below error when trying to load the data.
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Info(1021013)
ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]CURSOR IDENTIFIED IN FETCH OR CLOSE STATEMENT
IS NOT OPEN (DIAG INFO: ).]
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Info(1021014)
ODBC Layer Error: Native Error code [4294966795]
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Error(1003050)
Data Load Transaction Aborted With Error [7]
[Mon Jan 10 11:02:56 2011]Local/{App Name}///Info(1013214)
Clear Active on User [Olapadm] Instance [1]
Interestingly, after the job fails thru our batch scheduler environment, when I run the same script that's being used in the batch scheduler, the job completes successfully.
Also, this is first time, I saw this kind of error message.
Appreciate any help or any suggestions to find a resolution. Thanks,

Hii Priya,
The reasons may be the file is open, the format/flatfile structure is not correct, the mapping/transfer structure may not be correct, presence of invalid characters/data inconsistency in the file, etc.
Check if the flatfile in .CSV format.
You have to save it in .CSV format for the flatfile loading to work.
Also check the connection issues between source system and BW or sometimes may be due to inactive update rules.
Refer
error 1
Find out the actual reason and let us know.
Hope this helps.
Regards,
Raghu.

903/902/BC4J can't get data-sources.xml conn pooling to work in production; help

I have several BC4J ears deployed to a 903 instance of OC4J being configured as a standalone
instance. I've had this problem since I started deploying in development on 902. So it's
some basic problem that I've not mastered.
I can't get data-sources.xml managed connection pooling to actually pool conn's. I'm wanting
to declare my jndi jdbc source connection pool in j2ee/home/config/data-sources.xml.
Have all BC4J apps get conns from this JNDI JDBC pool. I've removed all data-sources.xml from my BC4J ears,
and published the jndi jdbc source in my oc4j common data-sources.xml. I've tested that this is
the place controlling the conn URL/login passwd by commenting it out of config/data-sources.xml
and my BC4J apps then throw exceptions, can't get conn.
I've set the oc4j startup cmd line with the BC4J property to enabled connection pooling:
-Djbo.doconnectionpooling=true
symptom
Connections are created and closed. Instead of being put back into the pool managed by oc4j,
what ever BC4J is doing or my data-sources.xml is doing, the connections are just being created and
closed.
I can verify this via (solaris) lsof and netstat, where I see my oc4j instance under test load
with only 1 or 2 conns to the db box, and the ephemeral port is tumbling, meaning a new socket is
being opened for each conn. ;( grrrrrrr
Does anyone have a clue as to why this is happening?
Thanks, curt
my data-sources.xml
<data-sources>
     <data-source
        class="com.evermind.sql.DriverManagerDataSource"
        connection-driver="oracle.jdbc.driver.OracleDriver"
        ejb-location="jdbc/DEVDS"
        location="jdbc/DEVCoreDS"
        name="DEVDS"
        password="j2train"
        pooled-location="jdbc/DEVPooledDS"
        url="jdbc:oracle:thin:@10.2.1.30:1521:GDOC"
        username="jscribe"
        xa-location="jdbc/xa/DEVXADS"
        inactivity-timeout="300"
        max-connections="50"
        min-connections="40"
    />
</data-sources>

I've run another test using local data-source.xml, that's packaged in the .ear. Still
pooling under BC4J doesn't work??
A piece of info is that the 903 oc4j release notes states that global conn pooling doesn't
work. Infering that the j2ee/home/config/data-sources.xml data sources aren't pooled or ??
I just tested so called local connection pooling, where I edited the data-sources.xml that
gets packaged in the ear, to include the min/max params and re-ran my test.
Still, the AM creates a new conn, it's to a new socket, and closes the conn when done. Causing
each conn to not be pooled, rather opened then closed to the DB box. As verified with lsof and
netstat, checking the ephemeral port # on the DB box side, always changes, meaning it's a
new socket and not an old pooled conn socket.
???? What the heck??
Surely if the AM conn check out / return code works properly, OC4J's pooling JDBC driver would
pool and not close the socket??
Has anywone gotten JDBC Datasource connections in BC4J to actually be pooled under OC4J??
Since I couldn't get this to work in my early 902 oc4j testing, and now can't get it to work
still under 903 OC4J, either it's my config or BC4J AM's code or OC4J?
Any thoughts on how to figure out what's not configed correctly or has a bug?
Thanks, curt

Adding field GAMNG ( Target Quantity )in the Data Source 2LIS_04_P_ARBPL

We are adding field GAMNG ( Target Quantity ) in the Data Source 2LIS_04_P_ARBPL ( Work Center View from PP/PP-PI )
The field GAMNG is available in the communication structure maintainace.
The problem is- We are not able to drag & drap field GAMNG from the Communication structure LBWE. Getting the error - End phase 002 ***********************************************************
Message no. D0322 ..
We deleted Setup table , Meins field already exist in comm str.
1. How we able to drag the field from the communication structure as getting the above error. We searched SDN & try to follow that method but not working.
2. We can add the field in SE11 - Structure -Manually, then we have to write ABAP code.
Kindly suggest correct answer.
Edited by: sk kamaruzzaman on Dec 20, 2011 2:08 PM

Hi,
There could be a number of reasons why you are getting the error:
1. Fields are not assigned to datatypes.
- Check structure in SE11 and assign to datatypes.
2. There are inactive appends in the extract structure.
- Double-click one of the includes. You will get a new screen with the INCLUDE structure. Click the button append-structure. Check if the append is inactive.
3. The appended structure is in a different development class from the one of the structure it is being appended to.
Please review and apply the following notes carefully :
766603 Activation problems with extract structures
623411 LBWE: Gener. terminates with D0 322 (end phase 002)
757923 LBWE: Generation terminates with D0 322 (end phase
600708 D0 322: End phase 002
It is not possible to enhance the datasource 2lis_04_MATNR with the field GAMNG (so its possible that its the same for 2LIS_04_P_ARBPL) because GAMNG has the reference field AMEIN, which has a STATE F (forbidden) in table TMCEXCFS .
Check to see if this is the same on your system.
Rgds,
Colum

Error while creating data source using Oracle Enterprise Manager 10g

Hi,
I have deployed my web application developed on OC4J 9.0.4 stand alone (Win2K) to an integrated OC4J version(Solaris) using Oracle Enterprise Manager 10g.
However, I get an error when I try to create a data source.
The data source I want to create would have the following parameters (as seen in data-sources.xml on the stand alone version):
     <data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="TestDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/TestDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          url="jdbc:oracle:thin:@hostName:1521:test"
          username="user"
          password="password"
          min-connections="5"
          max-connections="20"
          inactivity-timeout="30"
     />
When I entered the above data on the Enterprise Manager Data Sources page, I got the following error:
quote:
Error saving Data Source Properties. - Entity et="system";ei="0",et="application";ei="48",et="data-sources";ei="167":child:data-sourcechild key:location:jdbc/OracleCoreDS; class:com.evermind.sql.DriverManagerDataSource; already exists in the repository. Resolution: Please check the code base.
unquote:
Could somebody tell me what I'm doing wrong ?
I tried to manually edit the data-sources.xml file but the data source didn't show up on the Enterprise Manager.
I'm using a new OC4J instance (on the Solaris machine) for my applications. Is the data source error related to this?
Any help will be greatly appreciated.
Thanks,
Shyam

Thanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/OracleDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="scott"
          password="->pwForScott"
          url="jdbc:oracle:thin:@localhost:1521:oracle"
          inactivity-timeout="30"
     />
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam

Error in Data source

Dear All,
While creating transfer or update rule the following error occurs -
"DataSource COMPLEX does not exist in source system SANTANU of version A"
here COMPLEX = Data Source
SANTANU = Source System
Where as I have already defined Data Source Complex under Source System Santanu.
Thanks and Regards
Santanu

Hi snato,
check in the Source system
Use Tcode RSA6 in source system.
If the data source is in active state it will displayed there.
If not active ,you can use RSA5 Tcode to activate it if the datasource.
Use extractor checker to see if the datasource extracts any data from R/3
Goto T-code RSA3 in sourcesystem and check ur datasource
BW system
-->Did you replicate the data source?
-->R u able to see the data source in BW side?
--> If replicated can see the data source then check for the DS is active or not?
--> If the DS is inactive then if you want o activate the data source -->Double click on DS and change -->activate the data source and try to create update rules or transformations.
Regards
KP
Edited by: prashanthk on Aug 14, 2010 9:40 AM
Edited by: prashanthk on Aug 14, 2010 9:43 AM

Error While Activating the Data Source in RSA5 T-Code

Hi,
When i tried to inactive the data source in 2lis_11_vahdr it shows "Data Source does not exists errror".
So i went to RSA5 T-Code and tried to activate the data source but there it is throwing the error like "Event with errors Extract in Data Source 2LIS_11_VAHDR".
I have checked the above thing with all the data sources every one are throwing the same errors. Can any one please suggest me how to solve the issue.
Or Is this issue related to Basis People?.
Regards,
Kumar.

Hi Ravi,
1.When i tried to inactive the data source in LBWE T-Code the error is "Data Source 2lis_11_vahdr does not exists ".
2. In RSA5 T-Code while activating the data source the error is "Event with errors Extract in Data Source 2LIS_11_VAHDR".
Regards,
Kumar.

Error while transporting Data sources from DEV to Qual

System : SCM 5.0 (SP 8), BI 7.0 (SP 12)
1) We are trying to transport Data source objects from Development server to Quality server.
2) Data sources of Type R/3 and Web Service.
3) We are able to transport the objects from Dev.
4) Once we import the objects to Quality server, the objects are becoming into INACTIVE stage.
Please help... Thanx in advance..
Regards
Manoj

HI tanu,
could you let me know how you have solved this issue.
which object not active.
i am having the same issue now.
kris

Data source not in active state in admin workbench in BIW

Dear all,
We had created a ZHR datasource i our source,but when we replicate the same data source in our BW system it is coming in inactive state,can you pls tell what is the issue
thanks

Amarinder's comment is true, if it is within development system.
But when u transport this datasouce from R/3 DEV to R/3 QA, after the replication into BI QA, U should again transport same datasource from BI DEV to BI QA.. Same applies to PRD too.

Data sources in deploying web app. to Oracle Application Server

I am using simple web application - JSP with BC4J (JDeveloper 9.0.5.1).
I want to configure my application to use Data Source instead of JDeveloper connection and deploy it to production database, so DB administrator will take care of username and password.
First, I create a new application module configuration that uses a data source instead of a JDeveloper connection with BC config. name TestAppModuleWithDS.
Then I modify my application client (DataBindings.cpx) to use the new configuration (TestAppModuleWithDS).
After that I create deployment profile and deploy to application server connection and try to test it on standalone server, and on production server together with my DBA.
But the application is not running, always displaying error messages...
Please what is the procedure and how to set Config of ApplModule.
It is working properly with embeded server, but on standalone server there is an error:
java.lang.UnsupportedClassVersionError: oracle/jdeveloper/cm/ConnectionDescriptor (Unsupported major.minor version 48.0)
     at java.lang.ClassLoader.defineClass0(Native Method)
     at java.lang.ClassLoader.defineClass(Unknown Source)
     at java.security.SecureClassLoader.defineClass(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.OC4JSecureClassLoader.defineClassEntry(OC4JSecureClassLoader.java:172)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].naming.ContextClassLoader.defineClass(ContextClassLoader.java:1154)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].naming.ContextClassLoader.findClass(ContextClassLoader.java:390)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].naming.ContextClassLoader.loadClass(ContextClassLoader.java:138)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClassInternal(Unknown Source)
     at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:271)
     at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:473)
     at oracle.jbo.common.ampool.ContextPoolManager.findPool(ContextPoolManager.java:165)
     at oracle.jbo.http.HttpContainer.findSessionCookie(HttpContainer.java:817)
     at oracle.jbo.html.jsp.datatags.ApplicationModuleTag.doStartTag(ApplicationModuleTag.java:169)
     at lastcoil.jspService(_testjsp.java:52)
     [SRC:/testjsp.jsp:11]
     at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:349)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Unknown Source)
Application module in testjsp.jsp (_testjsp.java) is:
oracle.jbo.html.jsp.datatags.ApplicationModuleTag __jsp_taghandler_1=(oracle.jbo.html.jsp.datatags.ApplicationModuleTag)OracleJspRuntime.getTagHandler(pageContext,oracle.jbo.html.jsp.datatags.ApplicationModuleTag.class,"oracle.jbo.html.jsp.datatags.ApplicationModuleTag id configname releasemode");
__jsp_taghandler_1.setParent(null);
__jsp_taghandler_1.setId("TestAppModule");
__jsp_taghandler_1.setConfigname("test.TestAppModule.TestAppModuleWithDS");
__jsp_taghandler_1.setReleasemode("Stateful");
__jsp_tag_starteval=__jsp_taghandler_1.doStartTag();
if (OracleJspRuntime.checkStartTagEval(__jsp_tag_starteval))
DataBindings.cpx is configured like this:
?xml version='1.0' encoding='windows-1252' ?>
<JboProject
id="DataBindings"
xmlns="http://xmlns.oracle.com/adfm/application"
version="9.0.5.15.88"
SeparateXMLFiles="false"
Package=""
ClientType="JClient" >
<Contents >
<DataControl
id="TestAppModule"
SubType="DCBC4J"
SupportsFindMode="true"
SupportsTransactions="true"
Package="test"
FactoryClass="oracle.adf.model.bc4j.DataControlFactoryImpl"
Configuration="TestAppModuleWithDS" >
<Parameters >
<Parameter
name="Sync"
value="Batch" >
</Parameter>
</Parameters>
</DataControl>
</Contents>
</JboProject>
D:\JDeveloper10\j2ee\home\config\data-sources.xml je:
<?xml version="1.0" standalone='yes'?>
<!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://xmlns.oracle.com/ias/dtds/data-sources.dtd">
<data-sources>
     
     <data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="OracleDS"
          location="jdbc/OracleCoreDS"
          xa-location="jdbc/xa/OracleXADS"
          ejb-location="jdbc/OracleDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="scott"
          password="tiger"
          url="jdbc:oracle:thin:@localhost:5521:oracle"
          inactivity-timeout="30"
     />
     <data-source
          class="com.evermind.sql.DriverManagerDataSource"
          name="TestAppModuleWithDS"
          location="jdbc/hmlCoreDS"
          xa-location="jdbc/xa/hmlXADS"
          ejb-location="jdbc/hmlDS"
          connection-driver="oracle.jdbc.driver.OracleDriver"
          username="user1"
          password="psw1234"
          url="jdbc:oracle:thin:@server.com:1521:sidname"
          inactivity-timeout="30"
     />
D:\HotStripMill Projects\bc4j\src\lastcoil\common\bc4j.xcfg
<?xml version = '1.0' encoding = 'UTF-8'?>
<BC4JConfig>
<AppModuleConfigBag>
<AppModuleConfig name="TestAppModuleWithDS">
<DeployPlatform>LOCAL</DeployPlatform>
<JDBCDataSource>jdbc/hmlCoreDS</JDBCDataSource>
<jbo.project>bc4j</jbo.project>
<AppModuleJndiName>test.TestAppModule</AppModuleJndiName>
<java.naming.factory.initial>oracle.jbo.common.JboInitialContextFactory</java.naming.factory.initial>
<ApplicationName>test.TestAppModule</ApplicationName>
</AppModuleConfig>
</AppModuleConfigBag>
<ConnectionDefinition name="hml">
<ENTRY name="JDBC_PORT" value="1521"/>
<ENTRY name="ConnectionType" value="JDBC"/>
<ENTRY name="HOSTNAME" value="server.com"/>
<ENTRY name="user" value="user1"/>
<ENTRY name="ConnectionName" value="hml"/>
<ENTRY name="SID" value="sidname"/>
<ENTRY name="JdbcDriver" value="oracle.jdbc.driver.OracleDriver"/>
<ENTRY name="password">{904}05437B2C11AE10318B521E7C6EE279666E</ENTRY>
<ENTRY name="ORACLE_JDBC_TYPE" value="thin"/>
<ENTRY name="DeployPassword" value="true"/>
</ConnectionDefinition>
</BC4JConfig>
</data-sources>
Thanks!

iAS 1.0.x is StoneAge Technology (TM).
Using the E-Business Suite you should look into the newer versions of the Application Server. I believe that 10.1.2.x supports the EBS, otherwise 9.04 should do the trick. Webservice support is much better in the newer versions. 1.0.x is from around 2000/2001 so the Webservice technology back than was "different" :-)
cu
Andreas

Application Server Data Source settings help needed (10.1.2.0.2)

Hi,
Can someone tell me what maximum values can I set in the following properties under Connection Attributes when I define a DataSource on
Application Server. I have almost 25+ web application deployed on my 10.1.2.0.2 server that all uses one data source I have defined. Now the issue is the number of requests
are very high and every now and then I get timeout error when trying to get the database connection. At one particular instance at peak time I may get over 200+ requests that
do some databse connections etc. Following are my current settings. But need to increase some more but wondering what are the maximum values I can have. I have only one server 10.1.2.0.2
Connection Retry Interval (seconds) = 5
Max Connection Attempts = 3
Cached Connection Inactivity Timeout (seconds) = 30
Maximum Open Connections = 60
Minimum Open Connections = 10
Wait For Free Connection Timeout (seconds) = 15
What other properties can I have to make use of datasource effectively.
Thanks

Here is the copy of my datasources.xml.
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE data-sources PUBLIC "Orion data-sources" "http://xmlns.oracle.com/ias/dtds/data-sources-9_04.dtd">
<data-sources>

<data-source class="com.evermind.sql.DriverManagerDataSource" name="OracleDS"
               location="jdbc/OracleCoreDS" xa-location="jdbc/xa/OracleXADS"
               ejb-location="jdbc/OracleDS"
               connection-driver="oracle.jdbc.driver.OracleDriver"
               username="scott" password="tiger"
               url="jdbc:oracle:thin:@//localhost:1521/oracle.regress.rdbms.dev.us.oracle.com"
               inactivity-timeout="30"/>

<data-source location="jdbc/TestDS"
               class="com.microsoft.jdbcx.sqlserver.SQLServerDataSource"
               password="pwd" xa-location="jdbc/TestDS"
               ejb-location="jdbc/TestDS"
               connection-driver="com.microsoft.jdbc.sqlserver.SQLServerDriver"
               username="usr"
               url="jdbc:microsoft:sqlserver://someloc99:1433/DevelopmentAp"
               inactivity-timeout="30" name="jdbc/TestDS"
               connection-retry-interval="5" max-connections="50"
               max-connect-attempts="3">
    <description>jdbc/TestDS</description>
    <property name="DatabaseName" value="DevelopmentAp"/>
    <property name="serverName" value="someloc99"/>
</data-source>
</data-sources>I also tried changing max-connections="0" it did helped but still after sometime I get timeout while connecting to the database. Don't know if it's with SQL Server that is not letting that many concurrent connections/sessions or something on the Application Server side.
Thanks
Message was edited by:
WhiteSox
Message was edited by:
WhiteSox

Inactive data source

Similar Messages

Maybe you are looking for