Inactive DataSource - two clients in Development System

Hi,
I have two developement clients 100 and 130. What ever changes I make in Client 100, it is supposed to reflect in Client 130. We use developement Client 100 to make any changes and use Client 130 to extract/trasnsfer data to BW system.
I activated my Datasource 2LIS_02_ITM in my Developemen1 client 100. But, it is still inactive in client 130.
Let me know if I am missing any steps.

Hi Sven,
"Is the same to ALE. " - I did not understand this sentence will please explain this
"You must customizing to separate the two clients. you need two different "logical system name"."
I am just a contract employee so I am not expected to give those advises. Anyway if I have to transport the request then which request would it be, I mean customizing request or workbench request.
Please let me know
Thank you,
Prasaad

Similar Messages

Two clients in XI system

Hi all,
Actually client 100 is created in Production .while installation in java engine its through some error, we are not able to continue the installation & we are not able to connect the jave engine with client 100.So that we created the new client 101 and we made the client copy again and started installation its completed succesfully.So there is any issue that of two client in production system & Can we will delete the 100 client in the production system is there is any issue.
pls help me in this ASAP.
Kind Regards,
Gopinath.

hi,
if you don't have any messages yet
delete it and start the installtion once more
it may help to prevent many problems in the future
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Multiple clients in Developement system for Charm

Hi Solman experts,
We are planning for the Charm implementation and we have multiple clients in Developement system.
Major hurdle is how to keep all the development clients in sync.
we have following clients
100 Golden client
300 configuration client
400 ABAP Developement client
500 Unit test
600 HR1
700 HR 2 clients
All configurations will be made in Client 300 and transported to QA and all developements will be made in client 400
Transports released from 300 and 400 should go all other clients.
Solman experts could anyone advice whether this is can be done using charm.
regards
Naveen

Hello Naveen,
Please, check the point 1 of the following link:
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
I think that this link can answer your question.
Best Regards,
Diego Fischer

RFC BETWEEN TWO CLIENTS IN DEVELOPMENT

hi everyone,
here connection is already exists in between two clients(development) now i have to transfer ztable from client 1 to client2.
if any body have the steps and code please guide me.
Best regards,
Sunil

Hi,
Log on to your destination client (where the form doesn't yet exist).
Transaction SE71, menu option Utilities -> Copy from Client.
Fill in the name of the form, the client number where it already exists, and the name of the copy (it can be the same of different to the existing form).
Execute.
This will prompt for a package for your new form, which can be different to the original.
Job done.
Regards,
Nick

Copy table data between to two client in different system ( QAS - PRD )

Dear all
i make a copy client from PRD to QAS , it success only on table have issue ( BSIS )
original size & number of records from source client (900):
in the new target client (705)
so what is the way / procedure to complete the remaining records / lines ??

Hi
There are no procedure, technical ways do exist to copy data from a system to another (mainly at DB level : export tools, database links...) but
1) copy / export a 10M lines table will take some time
2) tables like BSIS that are an index table for BSEG should be copied on the same timeline as all the accounting related tables.
Thus even if it is technically possible to get back the data from PRD to QAS you will create inconsistencies as the latest accounting documents from production will only be present in BSIS on your QAS system... Check with developer / consultants if they can stand this inconsistency
Regards

Two ABAP Development Clients with Transport enabled in Development System

Hello All,
I have a unique situation in my development systems. We currently have two abap development clients with client settings which allows repository transports to be created. The reason for this setup is because there are two different abap development teams who want to work independently.
Has anyone see two development clients in development system? Do you see any risk with having two abap development clients with transport enbaled? Should I force them to work in ONLY ONE ABAP development client?
I would like to know your thoughts?
Thx...Rocky

Hello,
It may not a good idea to have two development clients. You have to manage with the following issues:
(1) Customizing transports need to be moved to two clients
(2) You may have to peridically sync. them between each other with all the development objects
(3) Data needs to refreshed in two clients for development/unit test purposes
(4) Same object may be edited in two clients independently at the same time which is likely to go to Production at different times resulting in version sequencing issues
(5) Vension of data of object will be lost if you want to retrieve old version.
Thanks,
Venu

Re: LOCOCKPIT DATASOURCES IN DEVELOPEMENT SYSTEM

HI
KINDLY READ FULL QUESTION AND CLARIFY.
IN A SYSTEM LAND SCAPE OF DEVELOPMENT-QA-PRODUCTION
EG: IF I AM USING LO COCKPIT -
IF I WANT TO INSTALL A DATA SOURCE FROM R/3 WILL I BE ACTIVATING DATASOURCE IN R/3 DEVELOPMENT SYSTEM R ELSE ON PRODUCTION SYSTEM.
IF I AM DOING THE ACTIVATION ON DEVELOPMENT SYSTEM THEN WHEN WE GO TO PRODUCTION DO I AGAIN NEED TO DO THE DELTA SETTINGS AND SETUP ON PRODUCTION SYSTEM R/3--????
IF I AM EXTRACTING DATA INTO BW DEVELOPMENT SYSTEM, WHEN I TRANSPORT IT TO QA R PRODUCTION DO I AGAIN NEED TO DO SET UP LIKE REPLICATION OF DATASOURCES FROM R/3 TO PRODUCTION SYSTEM BWWHAT IS THE METHODOLOGYKINDLY EXPLAIN IN DETAIL.
SO I AM VERY MUCH CONFUSED. ABOUT WHAT R THE ACTIVITIES I NEED TO DO ON DEVELOPMENT SYSTEM R ELSE PRODUCTION SYSTEM.
KINDLY CLARIFY MY DOUBTS
THANKS AND REGARDS
NEELKAMAL

Hi Neel,
when you install (transaction RSA5) a datasource in DEV you have to put this activation in a change request. The same for Logistic Cockpit delta activation (LBWE).
So, to have the same situation (activated datasource and delta) in QA and PRD.
On the other hand, QA and PRD are not open for any modification, therefore a direct activation is not allowed.
Clearly, when you import your change request (with the related activation), THEN you have to do a replication of the source system in BW (in order to let BW see the updated situation).
Step by step for LO:
activate the datasource in RSA5.
adjust it in RSA6.
activate delta (green light in LBWE)
transport CRs in the other environment (and take care of everything in this case...)
replicate datasource in BW
(remember that setup job and delta init and collective job have to be executed in every environment
Bye,
Roberto

Transport change request to two clients at the same time

Hello all,
we have two clients in QAS system - 600 and 700, now the extended transport control has been setup, once we release a TR in DEV system, there will be two entries in QAS import queue, one for 600 and one for 700, I would like to know whether there is a way to import this TR into QAS (both 600 and 700 client) at the same time, that is to say, just one import action imports the TR into both 600 and 700.
Currently we have to import one by one, click the entry for 600, import it, and then click entry 700, import it.
Thank you.
Best regards,
Fresh

Hi,
If you want to transport each and every request which is released from Development into both the clients, better schedule transports in both the clients every 1hr/with some duration. Then system automatically imports the requests into target clients without any user intervention.
Delete all the transports which are "ready to be imported" from Quality queue before you scheule the job!
Regards,
Nick Loy

Purpose of Multiple Clients in Development Server

can anybody tell me the advantages and
disadvantages of having multiple clients in a
development server?

I don't think there is disadvantage when we have multiple clients for development system
DEV SAP system may have multiple clients..
Main pupose : Changes can be client dependent or client independent
Client-independent effects some clients.
Client-dependent effects all clients.
Let me say one example : Dev system has two clients
100 - Here we can write the code
200 - Testing will be here ( customizing will done here)
http://help.sap.com/saphelp_nw04/helpdata/en/8d/933d3c3a926614e10000000a11402f/frameset.htm
http://www.sap-img.com/general/what-is-sap--landscape.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/96/8a99386185c064e10000009b38f8cf/content.htm
Thanks
Seshu

Comparing settings(ALL) between two clients

Dear Experts,
Can anyone tell me how can we compare two clients (Within a system and between systems). I have checked in help.sap.com and found something like SCU0, SCMP and Custom Scout(Hope, this works only in solution manager).
Is there any separate tcode where I can compare the complete config settings of two clients.(My requirement is I need to compare the settings of development client with that of quality client)
Please help.
Regards,
Sharath

Hello,
I think the ones you mentioned are the only options.
Regards,
Siddhesh

Can we have two R/3 Source Systems(Dev & Test) in BW Development....?

Hi All,
Till now we have only BW Development box..
Our Landscape for R/3 side is R/3 Development, Testing and Production.....
Already we have connected R/3 Development with BW Development... It is working fine as now... We have finished our task at Development...
My doubt is Can we Configure R/3 Testing to BW Development....eventhough R/3 Development is already configured with BW Dev....
Can we have two R/3 Source Systems(Dev & Test) in BW Development....?
Please help me out in this issue....
Your help will be appriciated...
Regards,
Kiran Telkar

Hi Kiran,
You can create second source system which will point to SAP R/3 Quality .
If you have transported all datasource activation requests to QA environment then all datasources are available in R3QA as well.
After creating source system , replicate datasources.
Only thing you need to do is to replicate efforts of assigning source system (R3QA)-> creating transfer rule -> Create info package and load data.
Hope that helps.
Regards
Mr Kapadia
Assigning points is the way to say thanks in SDN.

Inactive DataSource in Production System

Hi Experts,
I have a situation where DataSource inactive once I initialise infoPackage.we transported from Development to Production and it was active (green) in Production System.I tried to initialise infoPackage then I got the message
DataSource 2LIS_13_VDITM must be activated.How can I resolve the issue.Please throw some light on this issue.I am in a position like golive soon.your help will be appreciated and awarde

Hi,
1. Replicate the datasource at Application component Level. i.e. If your datasource is in an application component say, BW then right click on the application component "BW" and select "Replicate Metadata".
2. If you have transfer rules then activate them with program "RS_TRANSTRU_ACTIVATE_ALL".
SE38 -> RS_TRANSTRU_ACTIVATE_ALL, if you are not able to do it, ask help from your basis to do it, they will have option to do changes directly in prodution itself.
Also chk Note 1056060 - DataSource: Reactivation in the production system
Hope this helps,
Regards
CSM Reddy

Multiple Clients in BW 3.5 Development Systems?

In a Development BW 3.5 environment, can we have multiple clients? For instance, can we have a unit test client(with master and transactional data), a security client, and a golden configuration client.
We have heard that there may be issues with having more than one client, but we are not sure if this is correct. Our BW unit test client would be the only one of the three that is connected to a R/3 (4.7) Development client. The security and golden config client would not be connected to external systems. Is this landscape possible and supported by SAP?

Rick,
You cannot have more than two clients. A client is a technique used for isolating data records and configuration data which is technically stored in the same database tables into mutually exclusive sets of data. Clients may exists as separate for project or organizational reasons. Most configuration data is generally client independent in SAP operational systems while transactional and master data are usually client specific.
SAP BW Application does not make extensive use of the client concept. Infact with SAP BW all specific application functions can take place in one client. SAP BW does utilize basis clients technically but that is only for systems administration purposes.
Hope it helps.
Thanks
Mona

Is there a way to activate the whole application in Non Development system?

Hi All,
Is there a way to activate the whole application in Non Development system? Using some BRF Plus Tool.
We copied a sample application and customized the same as per our requirement. The same is then released to Test System for testing. On Test system this application with all component is in non-active state. We re activated the application with all the component and released it to Test System. But still the application is inactive.
Application is a of storage type system and so cannot use changeability exit to activate on test system.
TR log shows imported with error. Below is the extract of the error:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Runtime client: 000 / target client: 400
BRF+: Object activation of new version started for 418 object IDs
BRF+: <<< *** BEGIN: Content from Application Component CA *** >>>
BRF+: <<< BEGIN: Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
No active version found for 23.04.2014 08:14:10 with timestamp
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:10
No active version found for IT_FKKMAVS with timestamp 23.04.2014 08:14:11
BRF+: <<< END : Messages for IDs (53465BA36D8651B0E1008000AC11420B/ ) Table 'Dunning Proposal Line Items (Table)' >>>
BRF+: <<< *** END : Content from Application Component CA *** >>>
BRF+: Object activation failed (step: Activate )
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
BRF+: Import queue update with RC 12
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Errors occurred during post-handling FDT_AFTER_IMPORT for FDT0001 T
FDT_AFTER_IMPORT belongs to package SFDT_TRANSPORT
The errors affect the following components:
 BC-SRV-BR (BRFplus - ABAP-Based Business Rules)
Post-import method FDT_AFTER_IMPORT completed for FDT0001 T, date and time: 20140423011412
Post-import methods of change/transport request DE1K901989 completed
 Start of subsequent processing ... 20140423011359
 End of subsequent processing... 20140423011412
Any help would be appreciated.

Is IT_FKKMAVS part of the same transport request or was it sent already earlier?
You may have a look at the request if it was OK. Probably not.
Maybe in the meantime more requests reached the system that now have in combination solved the problem. What is your release and support package level?
Higher versions of BRFplus have a lot of automatic correction mechanisms built into it.
E.g. problematic imports are collected in an import queue. As soon as a request comes in that fixes any problems the after import processing for faulty imports is automatically redone.

Generate Export DataSource from InfoCube In Production System

Software component : BI release 7.0 SP 18
Dear Gurus,
we have a strange situation in our production system from a month till now.
We want to generate an export data source from an infocube to load data into another one but now when we try to generate in prod ( right click on infocube and select "Generate Export DataSource" ) we can't create anymore.
Following message appears :
no changes to repository and cross client customizing object allowed
and the generation is stopped.
We always did it in production system in the same way as in the other system and then transported the update rule or transformation, but now it seems that is no more possible.
No setting has been changhed in SCC4 and in object changeability. Maybe is an authorization problem or is due to any other setting?
Does anybody has a way to solve this problem?
<removed by moderator>!
Kind Regards
Stefano
Edited by: Siegfried Szameitat on Nov 24, 2008 4:18 PM

Hi Stefano,
If you want to generate an export datasource you ask your basis team to open the system so that you can do.
As per the Sap Best Practise you can do the export datasoorce in your development system and move it to the quality and after testing you transport to Production.
Generallly if you can look in to production authorizations you may have only some operation like to display only.SOme times basis may give authorizations like creation of DTP and Infopacks like that.
Regards

Inactive DataSource - two clients in Development System

Similar Messages

Maybe you are looking for