Inactive Node in Form Class FI_CA_PAYMENT_RECEIPT

Hi All,
There are some inactive parts in form class FI_CA_PAYMENT_RECEIPT and its a standard form class. Due to which I am unable to use it. Quick . Need your help on this issue.
Thanks
Neetesh
Moderator note - the quickest solution would be to search the forum and find this thread Form Class FI_CA_PAYMENT_RECEIPT inactive
Also - the inactive part should not be relevant and can be ignored.
Edited by: William Eastman on Apr 28, 2011 5:17 PM

Hi ,
You may try to active the form through EFRM and check the same .
As it being a technical issue i would recommend to consult your technical team for the same.
Cheers ,
Dewang

Similar Messages

Form Class FI_CA_PAYMENT_RECEIPT inactive

Hi Expert,
We would like to customize Cash Desk Receipt. SAP default Application form for receipt is FI_CA_PAYMENT_RECEIPT_SAMPL_SF and its form class FI_CA_PAYMENT_RECEIPT. We want to build a customize receipt of the same class FI_CA_PAYMENT_RECEIPT.
The form class FI_CA_PAYMENT_RECEIPT could not be activated as component REF_ITEMS remain inactive with error message "Too many parts to component WA_REF_ADDINF of DDIC type FICA_PAY_REC_STR_REF_ITEMS in form level REF_ITEMS". Message no. EZ559
We have used EFGN to active the form class.
Could you please suggest us in the regard?
Thanks & Regards,
Rupam Paul

Hi ,
You may try to active the form through EFRM and check the same .
As it being a technical issue i would recommend to consult your technical team for the same.
Cheers ,
Dewang

Form Class is not active

Hi Expert,
We would like to customize Cash Desk Receipt (SAP ISU). SAP default Application form for receipt is FI_CA_PAYMENT_RECEIPT_SAMPL_SF and its form class FI_CA_PAYMENT_RECEIPT. We want to build a customize receipt of the same class FI_CA_PAYMENT_RECEIPT.
The form class FI_CA_PAYMENT_RECEIPT could not be activated as component REF_ITEMS remain inactive with error message "Too many parts to component WA_REF_ADDINF of DDIC type FICA_PAY_REC_STR_REF_ITEMS in form level REF_ITEMS".
We have used EFGN / EFRM to activate the form class.
Request your suggestion in this regard.
Thanks & Regards,
Rupam Paul

Jurgen
Thanks for the explanations,
I just transfered the classification with Winshuttle from CL20N for every material but I still got the same error.
I'm not familiar with ALE transactions, can you please give me some details of how I can transfer these extra data from one environment to another.
Thanks,
François

About javax.microedition.lcdui.Form class

Hi friends
just tell me about the Form class in J2me .
my question is that is List control can be supported by the form class OR simply we use the MIDlet class in the program
Just answer me..

List implements the displayable interface so you just use mildet class and to display the list, use setCurrent() method.
If this answer is not matching your requirement, then let me know.

Tax form class variant

Hi Gurus,
Where can I view and configure the tax form class variant? When I use tax reporter, I don't know how it is defaulted with form HR_F_W2. I guess it is done by the variant for tax form classes, right?
For 2006, I want to use the form HR_F_W2_01 for tax reporter. How could this be done?
Thanks in advance.

Hi,
For country US. Goto IMG & do the settings as below
SPRO->Payroll->Payroll:USA->Tax Reporter->Tax Form Defination->Define original tax forms. Execute this & then choose tax form HR_F_W2 . Click on that & double click on the left hand side on issuing tax forms. Here in alternate form insert a new entry with HR_F_W2_01.
So when you run PU19 for W2 - Wage and Tax statement. This HR_F_W2_01 will be displayed along with other forms.
Hope this helps.
Thanks,
Sarika.

Form class for service notification

Hi All,
I am unable to find form class (In transaction EFCS) for service notification for shop papers printing. Can anyone help me in finding form class for this.
Thanks in advance.
Vijay

Tcode OIDA (I had to type /NOIDA
IMG>Plant Maintenance and Customer Service>Maint and Serv Processing>Maint and Serv Notifications>Notification Procesing>Notification Print Control

HELP! JDeveloper 10g: WrappedDocLiteralStub badly formed class

hello,
Using JDeveloper 10g preview, I created a wrapper/skeleton for a webservice.
I noticed a dependency on:
import oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub;
SO, i loacted this class in jdev.jar and extracted the 2 classes that I needed.
I then tried to load these 2 classes into oracle using the loadjava utility.
When trying to do this, I get an ORA-29545: badly formed class error.
does anybody have ANY idea's whats going on?
pelase help, thanks!
here is a dump of what happened:
F:\test>loadjava -user xxx/xxx@testdb -resolve -verbose WrappedDocLiteralStub$SerialisationInfo.class WrappedDocLiteralStub.class
arguments: '-user' 'xxx/xxx@testdb' '-resolve' '-verbose' 'WrappedDocLiteralStub$SerialisationInfo.class' 'WrappedDocLiteralStub.class'
creating : class oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub$SerialisationInfo
loading : class oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub$SerialisationInfo
creating : class oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub
loading : class oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub
resolving: class oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub$SerialisationInfo
errors : class oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub$SerialisationInfo
ORA-29534: referenced object XXX.oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub could not be resolved
ORA-29545: badly formed class:
errors : class oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub
ORA-29545: badly formed class:
The following operations failed
class oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub$SerialisationInfo: resolution
class oracle/jdeveloper/webservices/runtime/WrappedDocLiteralStub: resolution
exiting : Failures occurred during processing

Hi,
As a first step to solving this, can I ask:
1. What version of the database are you using
2. Have you loaded the Client SOAP stack (see http://otn.oracle.com/sample_code/tech/java/jsp/loadjars.html )
rgds
Susan
JDeveloper PM

Shutdown inactive node cause reboot active node

Hi,
when I try to shutddown a inactive node of Oracle clusterware (two nodes) the active node reboot (s.o Oracle Linux 5.6 and ocfs2).
Fire it acquires vip of second node, then reboot and work correctly.
Anyone can help me?
Have a nice day

user2907588 wrote:
Here the log of active node:
Jan 31 15:35:23 esse3-db1 avahi-daemon[7041]: Registering new address record for 192.168.101.222 on eth0. *> Jan 31 15:56:30 esse3-db1 kernel: bnx2: eth2 NIC Copper Link is Down*
Jan 31 15:56:32 esse3-db1 kernel: bnx2: eth2 NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON
Jan 31 15:56:59 esse3-db1 kernel: o2net: connection to node esse3-db2.unisalento.it (num 0) at 192.168.101.202:7777 has been idle for 30.0 seconds, shutting it down.
Jan 31 15:56:59 esse3-db1 kernel: (0,17):o2net_idle_timer:1503 here are some times that might help debug the situation: (tmr 1359644189.432221 now 1359644219.431047 dr 1359644189.432200 adv 1359644189.432221:1359644189.432221 func (1f70fe7a:504) 1359644047.329097:1359644047.329102)
Jan 31 15:56:59 esse3-db1 kernel: o2net: no longer connected to node esse3-db2.unisalento.it (num 0) at 192.168.101.202:7777 *> Jan 31 15:57:29 esse3-db1 kernel: (6377,17):o2net_connect_expired:1664 ERROR: no connection established with node 0 after 30.0 seconds, giving up and returning errors.*
*> Jan 31 16:01:40 esse3-db1 syslogd 1.4.1: restart.*
>
Edited by: user2907588 on 1-feb-2013 7.39Hello,
One of the nodes in cluster seemed to have been evicted previously due to eth2 NIC outage between nodes so as removing the failed node(could be what u r referring to "INACTIVE")
Please check I have highlighted in provided log information... Check If you are able to ping to the specified IP, and do password-less ssh to other node (101), and ask your system/network administrator to look into it...
Regards,
Naga

Form Class PSTM

Dear Experts;
I want to make a copy for the Form Class PSTM "HR Master Data Sheet" to make my own form template as well as we can do for the Payslip
But when I go to transaction PE51 "HR Form Editor" and select the form name XP02 HR Master Data Sheet and press Copy i get this message "Form Class PSTM can only be displayed by this Editor".
Please can anyone help me know from where can I edtit this Form?
Best Regards;
Lobna

Hi,
Form class PSTM can only be displayed with transaction PE51, not copied or modified.
Good Luck...!
KK

Call Non Standard Form Class

Dear Experts,
I'll try to explain my problem;
I have created new Form Class for print Service Notifications, I create three application forms for this Form Class. This is working fine.
Problem is:
I want to call this Form Class from Service Notification print button (TC IQS1, IQS2), and don't know how to do this. I want a pop-up asking me for which one of three application forms I want to print. (I can achieve this with standards like MOVE-IN).
Can anyone help me?
Thanks in advance.

Hello .... You'll need to call FM EFG_PRINT_EXPANED after the application form is selected. Have a look at one of the correspondence (print) events with transaction FQEVENTS.   This sample code below is from event R380.
Regards, Joe
--- prepare print workbench
CLEAR l_eprintparams.
--- fill print parameters usint i_efgpp
MOVE-CORRESPONDING x_efgpp TO l_eprintparams.
IF NOT ( x_dfkkcoh-formkey IS INITIAL ).
    l_eprintparams-formkey   = x_dfkkcoh-formkey.
ELSE.
    l_eprintparams-formkey = 'IS_U_IDE_REMADV_CMPLNT'.
ENDIF.
--- determine Language
IF x_dfkkcoh-spras IS INITIAL.
    l_eprintparams-langu     = l_corr_receiver-langu.
ELSE.
    l_eprintparams-langu     = x_dfkkcoh-spras .
ENDIF.
--- fill print parameters usint i_itcpo
MOVE-CORRESPONDING x_itcpo TO l_eprintparams.
--- call print workbench
CALL FUNCTION 'EFG_PRINT_EXPANDED'
    EXPORTING
      x_sendcontrol       = x_dfkkcoh-sendcontrol
      x_rec_addr          = l_corr_receiver-addrnumber
      x_rec_persnumber    = l_corr_receiver-persnumber
      x_printparams       = l_eprintparams
      x_archive_params    = x_archive_params
      x_archive_index     = x_archive_index
    EXCEPTIONS
      not_qualified       = 1
      input_error         = 2
      print_failed        = 3
      cancelled           = 4
      rec_addr_not_found = 5
      send_addr_not_found = 6
      OTHERS              = 7.

Moving active node resources to the inactive node

We have a 2 node , majority disk, Windows 2008R2 failover cluster.   The active node is currently showing all resources and services on node A.   Node B is the inactive node.    we are about to perform a DataCenter shutdown
test.   Our application manager would like us to make Node B inactive during the DataCenter Shutdown test but he believes we can make Node B active if we do it this way:
1. power down Node B (inactive node)
2. power down Node A (active node)
3. power up Node A (active node)
4. power up Node B (inactive node)
By doing this way, he believes Node B will automatically become the Active node.
I do not believe this is correct.   I believe it has to failover to get Node B active. So, my proposal is:
1. power down Node A (active node) This should cause a failover of resources and services to Node B
2. Once all resources and services are on Node B, power Node B down.   Now, both nodes are powered down and Node B is holding the cluster resources and services and is the Active node.
3. Power up Node B (now the new Active node)
4. Power up Node A ( the new inactive node)
Which is correct?
Thanks in advance

Earlier question on ownership ... In a two-node cluster, ownership does not mean much. In multi-node clusters, it is often used with the anti-affinity property to try to keep certain resources from running on the same node. For example, if you
have a four node host cluster running two VMs that are also in a cluster, you would most likely not want both of the SQL VMs to reside on the same node of the cluster. Using anti-affinity and preferred owners, you can pretty much ensure the two VMs never
end up on the same node. In a two node cluster, ownership doesn't mean much.
When SQL is installed in a cluster, SQL is installed on two or more nodes of the cluster. SQL is actually running on each node on which you have installed it. In your case, both nodes are running SQL. By default, if something happens to
the SQL instance running on one node, it will try to restart on the same node, i.e. it will not immediately failover. There is a retry count and a time limit set up on the resource. If the retry count is reached in the specified time limit, then
the resource, in your case the SQL instance, will fail over to the other node of the cluster.
In the Failover Cluster Manager console you will see a selection option for Cluster events. That will show you all the event log entries that have occurred on both nodes of your cluster relating to cluster events.
.:|:.:|:. tim

Form Class

Hi All ,
What are the steps to create a new form class   from scratch , without copying an existing form class. When we create a new from class how to select trhe structure or table to be used as Table/Structure in attributes in Form Level , 1:1 level or 1:N level.
Regards
Neetesh

Hi
Form class is basically the HR form type. It enables the consultant to differentiate between different types of HR Forms.
Following form classes are used in HR Forms:
Form Class      Description
CEDT              Remuneration statement
CEDT_CE        Remuneration Statement for Concurrent
                       Employement
CKTO              Payroll Account
CLGA              Wagetype Statement
CLJN               Payroll Journal
CLJO               Payroll Journal Old version
Each form class has its own predefined layout and set of fields.
Reward Points, if helpful.
regards
Waz
Edited by: Waz on Mar 11, 2008 10:10 AM

Badly formed class

initialization complete
loading : HCXMLUtil
creating : HCXMLUtil
resolver :
resolving: HCXMLUtil
errors : HCXMLUtil
ORA-29545: badly formed class: at offset 163 of HCXMLUtil.readXML expecting a class-org
.w3c.dom.Document but encountered a class-oracle.xml.parser.v2.XMLDocument.
loadjava: 1 errors
Java Code:
Document root = new XMLDocument();
root.appendChild( result );
conn = getConnection();
sav = new OracleXMLSave( conn, sTable );
sav.insertXML( root ); // **** Error here
Please help.

Yes, I am using Oracle 9i version 2 with JDK 1.3.1. I have also tried loading in without -resolve option. But when I run the program, it didn't like it because these classes are still marked as invalid.
The owner of the imported classes (ILOG) is still trying to figure out why as well. Probably some Oracle DBA experts like you out there may be able to throw in a few suggestions on what could be the problem?
A small part of the error stack:
resolving: class ilog/jum/client/IluCollector$Getter
errors : class ilog/jum/client/IluCollector$Getter
ORA-29534: referenced object xxx.ilog/jum/client/IluCollector could notProbably some Oracle DBA experts like you guys can throw in a few more suggestions on what could be the problem?
be resolved
ORA-29545: badly formed class:
errors : class ilog/jum/client/IluCollector$SystemPropertyGetter
ORA-29534: referenced object xxx.ilog/jum/client/IluCollector$Getter cou
ld not be resolved
ORA-29545: badly formed class:
errors : class ilog/jum/client/IluCollector
ORA-29534: referenced object xxx.ilog/jum/client/IluSAM could not be res
olved
ORA-29545: badly formed class:
errors : class ilog/jum/client/IluConnectionThread
ORA-29534: referenced object xxx.ilog/jum/client/IluJumServerUtil could
not be resolved
ORA-29545: badly formed class:
errors : class ilog/jum/client/IluJumLog
ORA-29545: badly formed class:
errors : class ilog/jum/client/IluJumServerUtil
ORA-29545: badly formed class:
errors : class ilog/jum/client/IluLicenseChecker
ORA-29534: referenced object xxx.ilog/jum/util/IluDigestorInvalidFormatE
xception could not be resolved
ORA-29545: badly formed class:
errors : class ilog/jum/client/IluLicenseReader
ORA-29534: referenced object xxx.ilog/jum/client/IluLicenseChecker could
not be resolved
ORA-29545: badly formed class:
Thanks,
M

Error Smart Form Collections using various Form Classes

I want to add a Smart Form into a collection contianing two PDS's .
Before I add the Smart Form the collection works.
The Collection is using customized form-class ZLSO_PWB_COVER and one PDF #1 is using standard form-class LSO_PWB_COVER and PDF #2 is using standard form-class LSO_PWB_CURRI_INFO.
After I add the Smart Form into the collection, the process errors out.
Any ideas why by adding the Smart Form I would get an error?

Solved myself.

Node in Form to change IDES Logo to Company Logo in TCode: SFP

Hi All,
In TCode: SFP for form PTRV_EXPENSE_FORM in the "Context" tab I check the nodes "I_FORM_HEADER_DATA_EMPLPYEE", "I_FORM_HEADER_DATA_EMPLPYER" and other nodes but they dosent have a subnode to change IDES logo. Unfortunately the "Layout" is not displaying by throwing up an error saying "design tools not present(i.e not installed)"
I also searched with terms LOGO/Image/Graphics on the form in "Context" tab but nothing showed up in the search
Could anyone please tell me the subnode where can I upload Company Logo
Regards,
Latha

Hi Waz
Thanks for your quick reply. I really appreciate your reply
I dont have authorization to access SO10.
I checked for INCLUDE ADRS_HEADER OBJECT TEXT ID ADRS in the form but couldnt find it.
Could you please explain me in detail if possible.
Regards,
Latha

Inactive Node in Form Class FI_CA_PAYMENT_RECEIPT

Similar Messages

Maybe you are looking for