Inactive number

Th elast day of my Skype number was 16th July, I couldnt recharge.
I added balance today so that i could make calls , the balance has been updates however the number is still inactive. When I am calling anyone it shows a different number.
And If I choose to reactivate , its asks from another $18..
Please help

PAYG SIMs are deactivated after 6 months of non-use and you've lost the no. after a further 3 months if you don't phone to reactivate it.

Similar Messages

Inactive Skype number & Voicemail issues

DeviceMaker: ZTE
Device Name: FIT 4G Smart
Device Model: ZTE Fit 4G Smart
Android OS version: Stock AU 4.4.4
Network: WiFi & Amaysim 4G (Optus Network)
Skype client version installed: 5.7.0.13054 I just purchassed a Skype number and it works for receiving calls on my mobile however i have some issues.1)In my profile it shows Skype Number as Inactive on the mobile app2)When i reject a call on the mobile app it will not go to voicemail, it just gives the engaged signal. (on the desktop version if i reject a call it goes to voicemail). IT WILL however go to voicemail on the mobile app if i let the call ring out. How i expect it to work:1) My skype number to show as active on the mobile app2) when rejecting a call using the mobile app it goes to voicemail

So the inactive number is fixed and i found out that on mobile apps when rejecting a skype call it will not go to voicemail only on the desktop version. This feature should be implemented.

Exploring CSS 11503 sticky table / sticky mask

Hi All
I am currently undergoing some testing with a client.
We have a VIP load balancing 8 instances. We are testing with the following configs
content test-test
    add service a
    add service b
    add service c
    add service d
    add service e
    add service f
    add service g
    add service h
    vip address 10.10.10.1
    flow-timeout-multiplier 225
    sticky-mask 255.255.255.252
    redundant-index 1000
    port 443
    protocol tcp
    advanced-balance sticky-srcip-dstport
    sticky-inact-timeout 360
    balance leastconn
active
We have traffic been sourced from 32 IP addresses and want all 8 instances to be used/hit, but this is not happening in all instances.
(from the above config, 4 consecutive IPs will be stuck to the same instance based on the sticky mask -- yes?)
For instance I would expect the following: with the Test IP addresses used based on the sticky mask:
10.120.1.168
10.120.1.169
10.120.1.170
10.120.1.171
(to be stuck to maybe instance a)
10.120.1.176
10.120.1.177
10.120.1.178
10.120.1.179
(to be stuck to maybe instance b)
I have tried the following command during tests:
show sticky-table l4-sticky ipaddress 10.10.10.1 255.255.255.252 443
and get an empty table back.
L4 Sticky List on Slot 1, subslot 1:
Entries for page 1.
Entry   Hash    Rule Rule Srv Srv      Time(Sec)     Hit Col Elem Inact
Number Value   Indx State Indx State    Elapsed       Cnt Cnt Type Cfg(Min)
Total number of entries found is 0.
L4 Sticky List on Slot 2, subslot 1:
Entries for page 1.
Entry   Hash    Rule Rule Srv Srv      Time(Sec)     Hit Col Elem Inact
Number Value   Indx State Indx State    Elapsed       Cnt Cnt Type Cfg(Min)
Total number of entries found is 0.
I would like to ascertain what source IP address is been stuck to what load balanced instance at any one time.
I have tried looking at the flow table but, that clears out quite quicky so not really an accurate method.
Thanks!

Hi All
I am currently undergoing some testing with a client.
We have a VIP load balancing 8 instances. We are testing with the following configs
content test-test
    add service a
    add service b
    add service c
    add service d
    add service e
    add service f
    add service g
    add service h
    vip address 10.10.10.1
    flow-timeout-multiplier 225
    sticky-mask 255.255.255.252
    redundant-index 1000
    port 443
    protocol tcp
    advanced-balance sticky-srcip-dstport
    sticky-inact-timeout 360
    balance leastconn
active
We have traffic been sourced from 32 IP addresses and want all 8 instances to be used/hit, but this is not happening in all instances.
(from the above config, 4 consecutive IPs will be stuck to the same instance based on the sticky mask -- yes?)
For instance I would expect the following: with the Test IP addresses used based on the sticky mask:
10.120.1.168
10.120.1.169
10.120.1.170
10.120.1.171
(to be stuck to maybe instance a)
10.120.1.176
10.120.1.177
10.120.1.178
10.120.1.179
(to be stuck to maybe instance b)
I have tried the following command during tests:
show sticky-table l4-sticky ipaddress 10.10.10.1 255.255.255.252 443
and get an empty table back.
L4 Sticky List on Slot 1, subslot 1:
Entries for page 1.
Entry   Hash    Rule Rule Srv Srv      Time(Sec)     Hit Col Elem Inact
Number Value   Indx State Indx State    Elapsed       Cnt Cnt Type Cfg(Min)
Total number of entries found is 0.
L4 Sticky List on Slot 2, subslot 1:
Entries for page 1.
Entry   Hash    Rule Rule Srv Srv      Time(Sec)     Hit Col Elem Inact
Number Value   Indx State Indx State    Elapsed       Cnt Cnt Type Cfg(Min)
Total number of entries found is 0.
I would like to ascertain what source IP address is been stuck to what load balanced instance at any one time.
I have tried looking at the flow table but, that clears out quite quicky so not really an accurate method.
Thanks!

CSS 11500 - how to clear sticky-table entry

Hi together,
1. is there any possibility to clear an entry in the sticky table ?
2. how could I find a sticky table entry, belong to a certain IP Addres or flow ?
commands I know to find more details infos about the sticky table and the flows find below, but how could I merge these infos ?
#sh sticky-table l3-sticky
L3 Sticky List on Slot 1, subslot 1:
Entries for page 1.
Entry Hash Rule Rule Srv Srv Time(Sec) Hit Col Elem Inact
Number Value Indx State Indx State Elapsed Cnt Cnt Type Cfg(Min)
1 a18015a 26 ACT 23 ALIVE 659 1 0 L3 15
2 a18015a 28 ACT 12 ALIVE 43 19 0 L3 15
3 a18016d 28 ACT 13 ALIVE 16 22 0 L3 15
4 a180170 26 ACT 12 ALIVE 727 1 0 L3 15
5 a180170 28 ACT 13 ALIVE 37 20 0 L3 15
6 a180171 28 ACT 12 ALIVE 46 24 0 L3 15
7 a180188 26 ACT 24 ALIVE 695 1 0 L3 15
for the flows:
# flow-agent show active_fcbs
Flow ID Src IP SPort Dst IP DPort Pr slot sub spt dpt Flow flg
8499f000 172.29.149.144 443 172.21.211.155 52988 6 2 1 1 1 00000098
83e0c860 172.19.28.47 1107 172.29.149.144 443 6 2 1 1 1 00001098
84049a40 172.29.148.149 389 172.29.27.133 35292 6 2 1 1 1 00000119
83b97160 172.28.19.130 4647 172.29.149.144 81 6 2 1 1 1 00001089
84588ae0 172.29.27.133 6101 172.29.148.167 33054 6 2 1 1 1 00000508
# flow-agent show fcb_details 0x83650080
Fcb Details for FCB: 0x83650080
SRC: 172.29.148.149-389 NAT: 172.29.149.136-389
DST: 172.29.27.133-40833 NAT: 172.29.27.133-40833
DMAC: 00-01-f4-16-e5-e6 SMAC: 00-0b-fd-be-c6-7d
IP Hdr ChkD: 65292 TCP/UDP Hdr ChkD: 65292
TCP SequenceD: 0 Task CE: 0
BytesIn: 1460 Frames In: 14
Dest VLAN: 101 Src/Dst Ports: 0/0
Slot/SubSlot: 2/1 SmbQ/PrcSwP: 32/1
Time Stamp / Time Out Info:
CurSecs: 1846643:342, started: 1793589:504 last activity: 1845164
May timeout due to inactivity: Yes , inactiveTimeout: 1048528
Inactive Secs: 1479, will timeout in: 1047049 secs
FCB Flags: 0x0119
0x0001 - Natting In Use
0x0000 - NOT L5 Aware
0x0000 - Non-Spoofed
0x0008 - IP/TCP Flow
0x0010 - Remote - Egress port
0x0100 - In LL List
0x0000 - Server-side
FCB FlaFlags: 0x8040
0x0040 - Is a static FCB
0x8000 - Handled an ACK

1/ to clear use the comand 'sticky-purge ...' from llama mode.
2/ To see if an entry exist of a particular ip address, use the command 'sho sticky-table l3-sticky ipaddress ...'
Regards,
Gilles.

Sticky problem

Hi, we have an issue where the sticky tables on our CSS are too large, so that if a server fails, connections move to the rest of the farm. As the sticky table does not time out anytime soon the failed server does not get many connections when it is back online.
Sticky-inact-timer command does not work as this only makes the entries eligible for removal.
The content rule is a L4 on port 443, I tried to configure this as an L5 rule with arrowpoint cookies but I suspect this does not work as we are using SSL connection that is not terminated on the CSS.
The servers themselves send a cookie ? Can I make use of this or as the connection is port 443 am I stuck ?
Any other solutions would be much appreciated.
cheers,
Mike

Mike,
let me first say, that if you configure a sticky-inact-timeout, once the entry times out it is removed IMMEDIATELY. There is no concept of elligibility. [this for flows and garbage collection - nothing to do with stickyness].
Here is an example
CSS11503-2(debug)# show sticky-table l3-sticky
L3 Sticky List on Slot 1, subslot 1:
Entries for page 1.
Entry Hash Rule Rule Srv Srv Time(Sec) Hit Col Elem Inact
Number Value Indx State Indx State Elapsed Cnt Cnt Type Cfg(Min)
1 c0a81429 5 ACT 9 EGRES 59 2 0 L3 1
Total number of entries found is 1.
L3 Sticky List on Slot 3, subslot 1:
Entries for page 1.
Entry Hash Rule Rule Srv Srv Time(Sec) Hit Col Elem Inact
Number Value Indx State Indx State Elapsed Cnt Cnt Type Cfg(Min)
Total number of entries found is 0.
CSS11503-2(debug)# show sticky-table l3-sticky
L3 Sticky List on Slot 1, subslot 1:
Entries for page 1.
Entry Hash Rule Rule Srv Srv Time(Sec) Hit Col Elem Inact
Number Value Indx State Indx State Elapsed Cnt Cnt Type Cfg(Min)
Total number of entries found is 0.
L3 Sticky List on Slot 3, subslot 1:
Entries for page 1.
Entry Hash Rule Rule Srv Srv Time(Sec) Hit Col Elem Inact
Number Value Indx State Indx State Elapsed Cnt Cnt Type Cfg(Min)
Total number of entries found is 0.
CSS11503-2(debug)# show sticky-table l3-sticky
L3 Sticky List on Slot 1, subslot 1:
Entries for page 1.
Entry Hash Rule Rule Srv Srv Time(Sec) Hit Col Elem Inact
Number Value Indx State Indx State Elapsed Cnt Cnt Type Cfg(Min)
1 c0a81429 5 ACT 14 EGRES 3 1 0 L3 1
As you can see, with a 1 min timeout, after 60 sec the entry is removed, and the next time the client comes in it is sent to a different server which creates a new entry.
So, your problem is that you either do not have the sticky-inact-timeout, in which case you need to manually clear the sticky table when a server goes down/up, or you have the timeout configured but with a value too high so the sticky entry is never removed because always refreshed by a new connection.
You can use 'advanced-balance ssl' without the ssl module but it only works with 1 type of ssl protocol - SSLv2 [I think] and for the other protocols it just reverts back to sticky-srcip.
So, you should stick with sticky-srcip and just make it works correctly by setting correct parameter or by clearing the sticky table manually.
Finally, I'd like to say that there is a known-issue with sticky-srcip in general.
This is the use of mega-proxy on the Internet.
A lot of people sitting behind a proxy and therefore appearing with a single ip address on the internet.
This is known to cause un-even loadbalancing.
That might be your problem and changing the inact-timeout would have no effect.
This is one of the reason for a lot of people to buy the ssl module so they can use cookies.
Gilles.

My skype number is inactive but i have enough cred...

Hi, i'm in UAE for travel, my account says that my skype number is inactive, but i have enough credit. How can i active it??

What type of license is the key for: individual, student/teacher, government, team, enterprise, promotional, bundled, what?
Where did you get the software installer from, a link in your purchases area or a download elsewhere on Adobe's site or from ProDesignTools?
Is there anything that was done out of the ordinary, originally, to get your software to work?
In other words might the key be for a different type of license than the installer you're trying to use.

DBA Reports large number of inactive sessions with 11.1.1.1

All,
We have installed System 11.1.1.1 on some 32 bit windows test machines running Windows Server 2003. Everything seems to be working fine, but recently the DBA is reporting that there are a large number of inactive sessions throwing alarms that we are reaching our Max Allowed Process on the Oracle Database server. We are running Oracle 10.2.0.4 on AIX.
We also have some System 9.3.1 Development servers that point at separate schemas in this environment and we don't see the same high number of inactive connections?
Most of the inactive connections are coming from Shared Services and Workspace. Anyone else see this or have any ideas?
Thanks for any responses.
Keith
Just a quick update. Originally I said this was only with 11.1.1.1 but we see the same high number of inactive sessions in 9.3. Anyone else see a large number of inactive sessions. They show up in Oracle as JDBC_Connect_Client. Does Shared Service, Planning Workspace etc utilize persistent connections or does it just abandon sessions when the windows service associated with an application is shutdown? Any information or thoughts are appreciated.
Edited by: Keith A on Oct 6, 2009 9:06 AM

Hi,
Not the answer you are looking for but have you logged it with Oracle as you might not get many answers to this question on here.
Cheers
John
http://john-goodwin.blogspot.com/

Skype number "inactive" in mobile app

I purchased a Skype number, but the mobile app shows it as Inactive. The Online profile shows my Skype number as being paid for. How do I refresh or update the app to reflect the online account status for the phone number?

Credit or a subscription is required for call forwarding or outbound calling. Standard inbound calls consume no credit or subscription. The people calling you still have to pay the standard rate it costs to call the Skype number from their phone (billed by their phone provider) similar to you having to pay for your Internet/Data plan bill to use Skype on your phone.

Growing Number of Inactive Sessions

When using WebDB application with 1.)Oracle Application Server 4.8.1 or 2.)Oracle 9i Application Server (Authentication Mode Basic) I noticed many sessions with status inactive in database.
What is the methodology to logout the session from application and avoid growing number of inactive sessions?
null

-- Submits a dbms_job to cleanup sessions
-- Expected Parameters:
-- 1. hours_old - number of hours after session start before
-- it should be deleted
-- 2. start_time - when should the first job be run or 'START'
-- 3. start_time_fmt - date format for start time
-- 4. interval_hours - how many hours between each run
-- If 'START' is provided for 2nd parameter, the 3rd parameter is
-- ignored and it will default the start time to the current time.
set serverout on
set verify off
create or replace package wwctx_patch is
procedure cleanup_sessions
p_hours_old IN number default 168 -- (1 week)
end wwctx_patch;
show errors package wwctx_patch;
create or replace package body wwctx_patch as
* cleanup expired sessions
procedure cleanup_sessions
p_hours_old IN number default 168 -- (1 week)
is
cursor expired_sessions is
select rowid
from wwctx_sso_session$
where active = 0
or (session_start_time < sysdate - (p_hours_old/24));
current_session expired_sessions%rowtype;
record_count number := 0;
begin
if p_hours_old is null then
return;
else
open expired_sessions;
loop
fetch expired_sessions into current_session;
exit when expired_sessions%notfound;
record_count := record_count + 1;
delete from wwctx_sso_session$
where rowid = current_session.rowid;
-- Note: The reason for doing this deletion in
-- a loop with a commit in the loop is so as not
-- to overrun the rollback segment in the case
-- where there are a lot of sessions to cleanup
-- with potentially a large amount of session
-- storage to be deleted.
-- do more than one per commit
if record_count >= 10 then
commit;
record_count := 0;
end if;
end loop;
close expired_sessions;
commit;
end if;
exception
when others then
rollback;
end;
end wwctx_patch;
show errors package body wwctx_patch
declare
INVALID_DATE_EXCEPTION exception;
INVALID_AGE_EXCEPTION exception;
INVALID_INTERVAL_EXCEPTION exception;
v_jobid binary_integer;
v_path varchar2(100) := 'oracle.portal.session';
v_name varchar2(100) := 'cleanup_jobid';
v_starttime date;
v_hours_old number;
v_interval_hours number;
p_hours_old varchar2(30) := '&1';
p_start_time varchar2(60) := '&2';
p_start_time_fmt varchar2(60) := '&3';
p_interval_hours varchar2(60) := '&4';
begin
-- validate hours_old parameter
begin
v_hours_old := to_number (p_hours_old);
exception
when others then
raise INVALID_AGE_EXCEPTION;
end;
-- validate starttime
begin
if upper(p_start_time) = 'START' then
v_starttime := sysdate;
else
v_starttime := to_date (p_start_time, p_start_time_fmt);
end if;
exception
when others then
raise INVALID_DATE_EXCEPTION;
end;
-- validate interval_hours parameter
begin
v_interval_hours := to_number (p_interval_hours);
exception
when others then
raise INVALID_INTERVAL_EXCEPTION;
end;
-- Create a preference store item for the job id that is
-- created for the submitted job.
-- This will allow it to be deleted or modified later.
begin
WWPRE_API_NAME.CREATE_PATH(v_path);
commit;
dbms_output.put_line ('Created path for job id.');
exception
when WWPRE_API_NAME.DUPLICATE_PATH_EXCEPTION then
-- probably this has already been created and a job
-- is already in place.
-- retrieve the job id
null;
when WWPRE_API_NAME.GENERAL_PREFERENCE_EXCEPTION then
dbms_output.put_line
('ERROR: Exception in preference path creation');
raise;
when others then
dbms_output.put_line('ERROR: creating path - ' | | sqlerrm );
raise;
end;
begin
v_jobid := WWPRE_API_VALUE.GET_VALUE_AS_NUMBER
p_path => v_path
,p_name => v_name
,p_level_type => WWPRE_API_VALUE.SYSTEM_LEVEL_TYPE
dbms_output.put_line ('DBMS_JOB id = ' | | v_jobid );
exception
when WWPRE_API_NAME.NAME_NOT_FOUND_EXCEPTION then
-- we'll try to create it below.
null;
end;
if v_jobid is null then
begin
WWPRE_API_NAME.CREATE_NAME
p_path => v_path,
p_name => v_name,
p_description => 'The job id of the DBMS_JOB for cleaning up '| |
'the expired session rows.',
p_type_name => 'NUMBER',
p_language => WWNLS_API.AMERICAN
commit;
exception
when WWPRE_API_NAME.DUPLICATE_NAME_EXCEPTION then
null;
when OTHERS then
dbms_output.put_line('ERROR: creating name - ' | | sqlerrm );
raise;
end;
end if;
declare
l_job varchar2(4000);
begin
l_job :=
'begin ' | |
' execute immediate ' | |
' ''begin wwctx_patch.cleanup_sessions(' | |
' p_hours_old => ' | | v_hours_old | |
' ); end;'' ' | |
' ; ' | |
'exception ' | |
' when others then ' | |
' null; ' | |
'end;';
if v_jobid is null then
DBMS_JOB.SUBMIT
job => v_jobid,
what => l_job,
next_date => v_starttime,
interval => 'SYSDATE + ' | | v_interval_hours | | '/24'
WWPRE_API_VALUE.SET_VALUE_AS_NUMBER
p_path => v_path,
p_name => v_name,
p_level_type => WWPRE_API_VALUE.SYSTEM_LEVEL_TYPE,
p_level_name => null,
p_value => v_jobid
commit;
DBMS_OUTPUT.PUT_LINE ('Cleanup job submitted.' | |
' Job ID = ' | | v_jobid);
else
-- v_jobid is not null
-- modify the job
DBMS_JOB.CHANGE
job => v_jobid,
what => l_job,
next_date => v_starttime,
interval => 'SYSDATE + ' | | v_interval_hours | | '/24'
commit;
DBMS_OUTPUT.PUT_LINE ('Cleanup job updated.' | |
' Job ID = ' | | v_jobid);
end if;
if p_start_time_fmt = 'NOW' then
DBMS_JOB.RUN
job => v_jobid
commit;
DBMS_OUTPUT.PUT_LINE ('Cleanup job run.');
end if;
end;
exception
when INVALID_DATE_EXCEPTION then
rollback;
DBMS_OUTPUT.PUT_LINE ('ERROR: Start Date Specified is Invalid');
when INVALID_AGE_EXCEPTION then
rollback;
DBMS_OUTPUT.PUT_LINE ('ERROR: Age For Cleanup Specified is Invalid');
when INVALID_INTERVAL_EXCEPTION then
rollback;
DBMS_OUTPUT.PUT_LINE ('ERROR: Job Interval Specified is Invalid');
when OTHERS then
rollback;
DBMS_OUTPUT.PUT_LINE ('ERROR: ' | | sqlerrm );
end;
set verify on

Need to make large number of items inactive - Inventory

Hi,
Is there an api or something I can use to make a large number of items inactive in Inventory?
Thanks
Roald

1. First create a status that makes the ietm as inactive (or use inactive status).
2. For one item, you can go to item screen and tools-->pending status
3. Enter the date and status (inactive). From when you want this item to be status to be implmented.
4. Run Update item statuses with pending statuses in that organization.
You can use dataloader for a lot of items (www.dataload.net)
If you think it is too much, you can take a look at which columns are populated from the screen and populate the same in the table (there is no API).
Run the program and all the items selected should be item inactivated.
Thanks
Nagamohan

Total number of active and inactive users

Hi All,
i have to count
The total number of users.
Total number of active and inactive users.
Total number of users after 90 days of inactivity:
I have gone through the below thread, but it is showing the user info. but not count.
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/maxl/ddl/statements/dispuser.htm
Please let me know how to write MaxL command or some other way to count the users.
Thanks,
Prathap

I doubt whether you are going to get the count using maxl, if the command you are using is producing information you can use then you might have to spool to a file and then parse the file and get the count values e.g. excel, scripting.
Cheers
John
http://john-goodwin.blogspot.com/

High number of inactive users ,what to do?

My questoins:
Since the open_cursor parameter is set to 1000 but the number of total sessoins is exceeded it. It is giving errors to some applicatoin users.
Details :
SQL> show parameter cursor
NAME TYPE VALUE
cursor_sharing string EXACT
cursor_space_for_time boolean FALSE
open_cursors integer 1000
session_cached_cursors integer 0
SQL> select count(1),status from v$session group by status;
COUNT(1) STATUS
26 ACTIVE
1791 INACTIVE
Oracle versino :11gR1
OS:SunOS
My questions:
1.What should i do? Should i directly kill the inactive sessions.If not what steps should a DBA generally follow in such situations?
2.How to find out since what time the user has been inactive?
3. I cannot speak to the users as there is not time to do so?
Cheers,
Kunwar

1 enable dead connnection detection in sqlnet.ora and/or set an idle time on the default profile.
2 v$session last_call_et in seconds.
Generally this is a result of 'programs' connecting for every statement via jdbc et other drivers.
You can choose to configure connection pooling in conjunction with multithreaded servers.
Open_cursor is NOT an instance wide limit though, it is session wide.
Sybrand Bakker
Senior Oracle DBA

Skype number inactive

I recently purchased a Kindle Fire HD 7" and installed Skype on it. I paid for the subscription and Skype credits. My bank shows both of those transactions, but when I open Skype it shows the credits, but says my Skype number is not active. When I signed up I received a number. What is wrong and how do I fix it? Also how do I find people with Skype?

did this fix itself? i have the same problem on 2 new kindle fire hd's.

Number ranges are in the Inactive mode.

Hi friends,
I am getting a problem with number ranges. When I am at Number ranges screen the options display only in active mode. change intervals and enter intervals are not in the active mode. How can I set this number ranges to be active and can be used. The same problem I am facing with the document number ranges. Please anybody help me in this regard. Thank you in-advance

Hello,
It would be authorisation issue. please use TCode SU22 and find if you have authorisation for object "S_NUMBER"
Regards
Lavanya

Delete Position with an Inactive Personnel Number

I have a position active in OM. The pernr tied to the A 008 relationship does not exist. How this happened is unsure, but I need to remove the position or the A 008 relationship as it is affecting reporting.
I've tried a PO13 to simply delete the relationship and have also tried program RHRHDL00 to remove the relationship, and the position object itself.
I'm given the error that "Personnel Number does not exist" when I try all methods of deletion.
Thoughts?
Cheers,
Stephen

I thought of that too, but there is no maintenance dialog for HRP1001 or did I miss something?
If your referring to get an ABAPer or a DBA to do it I could of course got that route.
I was trying to solve this functionally.
Thanks.
Stephen

Inactive number

Similar Messages

Maybe you are looking for