Inactive Transformations and DSO

Dear All,
After recent system patching ,i see lot of Transformations and DSO's gone inactive ,this is weird.
Could anyone tell is there any standard program to activate inactive DSO's.
Thanks in Advance
con

Hi Diogo,
    Thanks for your immediate response and for the right solution.
   I can activate it now,thanks again.
   Keep in touch .
Regards
Con

Similar Messages

Inactive transformations and DTPs after running BDLS

Hi Experts
I ran the BDLS job, Restored , Activated and Replicated the S.S.
Some of my transformations and DTPs got inactivated . Does any body have any clue of why this happened.
My observations was when i restored it gave an error message " Error 2 in RFC_VERIFY_DESTINATION " although the S.S check says OK and i am able to do loads and during replication process of S.S it was saying " Function module /SDF/AL_MAP_TRANSID_LOGH does not exist." I am not sure if the above errors/observations have any link to some of Transformations and DTPs getting inactivated while the rest of DTPs are active.
Please advice
Thanks
PK

Prabu,
have you solved this issue?
I am also faceing same issue after BDLS - source system change to BIQ, All DTP's are still assined to OLD-Logical system.
Please let us know how you solved it.
Appreciate your response
Shashi
Update:
Note# 1142908 fixed my issue..
Shashi
Edited by: Shashi on Sep 10, 2008 7:22 PM

Inactive Transformations and DataSources in Production System.

Hi Experts
We are working on BI 7.0 engine within Solution Manager.
We had some issues with DataSources initially while transporting BI Objects from Devp to Prod. We logged it into OSS and followed their procedure to redo the transports.
In the process, the issue was resolved but 2 New Transformations are created one for each Data Model (since I have only 2 InfoCubes) automatically and is the working model now.
Actual Transformations from Devp became Inactive in Prod and also there are 2 Inactive DataSources which are also from Devp. 2 New DataSources are again from Devp.
When I tried to Delete these unwanted Objects from Prod (I asked the Basis to Open Prod for me though this is not the best practice), it is asking for a Request ID. Also, since the Project has Gone Live already, I am scared if I might disturb the Production System.
Kindly, advise what best could and needs to be done.
Thanks,
Chandu

Initially, we implemented BI-HR module with standard content, which 3.x content (transfer / update rules)... in parallel we also did transformations & DTPs (BI 7.0 model).
Since, client wasn't sure with conversation of transfer rules (has lots of routines) to transformations & DTPs . So we transported both the models to prod sys... We created daily load process chains with transformations & DTPs... The actual plan was, if PC loads fails, then to go for manual loads of 3.x model...Fortunately 7.0 models was successful...
Then one month later, we deleted those transfer / update rules and 3.x datasources from prod sys, on the weekend (process chains runs only week days) without any issues...
We captured those deletion requests and deleted them from SE09 by unlocking them in SE03.

Change of Infoarea causes inactive transformations & DTPs!?

Hi all,
what I'm trying to do is simple to move one DSO object from one InfoArea to another one. The result is that I do get inactive transformations and DTPs from and to this DSO object in the following system!
Is this a system bug? Did anybody also encounter this problem? (I guess I once had this issue with another customer and we opened up an OSS message at SAP but it's some time ago and I'm not anymore aware of what the result has been...SAP OSS doesnt provide any notes so far...)
I'm happy to receive your comments,
Best regards,
bivision

what I'm trying to do is simple to move one DSO object from one InfoArea to another one. The result is that I do get inactive transformations and DTPs from and to this DSO object in the following system!
What do u mean by in the following system ? After moving DSO to another infoarea, if u transport that DSO alone, then the related transformations and DTPs become inactive. Its quite common.
U should collect related transformations and DTP along with DSO/Cube.
Moving ODS from 1 AC to another AC ?
Edited by: Mr. V on Feb 4, 2010 4:48 PM

Transformation between DS and DSO missing Non-cumulative KYF

Hi SDN,
I installed the business content for CML, and am working with 0CML_DELTA_CAP datasource. I would like to create a transformation between this datasource and DSO 0CML_O03.
By default, when you install the CML business content, the datasources use the 3.x dataflow concept (transfer rules, infosources, and update rules).
I would like to use the 7.x dataflow concept and created a transformation between the 0CML_DELTA_CAP datasource and the 0CML_O03 DSO. In the transformation, it is missing the fields 0CML_B330, 0CML_B340, 0CML_B360, 0CML_B380 in the datatarget. These key figures are non-cumulative with NCum Value change (0CML_B330 uses 0CML_B331 as value change). The value change key figures show up in the transformation, but the non-culmulative key figures do not.
Does anyone have any ideas why the non-cuml. kyf are not showing up in the transformation?
Thanks,

Hi Brendon,
The non- cumulative key figures are not mapped in the transformation. Only the 'Inflow' and 'Outflow' key figures for the non- cumulative key figure are mapped.
You can check the property for the non- *** KF in RSD1, where you would find the corresponding inflow and outflow kf. If both of these are mapped in the transformation, the non- *** kf would calculate the value in the report in which it is included as:
Non-*** KF value = Inflow value - Outflow value.
Hope this helps.
Regards,
Abhishek.

Active vs. Inactive Transformations

HI,
Just wondering the reason for inactive transformations (white ribbon)? Why would you have inactive transformations? Do inactive transformations get executed, or only active transformations? Also, I'm seeing an inactive transformation based on a data source that no longer exists. Why would someone keep this as part of the data structure in RSA1?
Thanks,
Kevin

Hello,
Just wondering the reason for inactive transformations (white ribbon)? Why would you have inactive transformations? Do inactive transformations get executed, or only active transformations? Also, I'm seeing an inactive transformation based on a data source that no longer exists. Why would someone keep this as part of the data structure in RSA1?
1. Inactive Transformations:
     There are many reasons, to have inactive transformations -
     If the target infoProvider (either DSO, InfoCube or master data attr , text) has been changed, meaning if you add any new field to any data target and activate the target. This will result in inactivation of transformation and also DTP will be inactive.
2. I'm seeing an inactive transformation based on a data source that no longer exists?
     This should not happen, when you delete the source (in your case the DataSource) then the transformation is automatically removed.. since there is no connection between the two (source and target). However, I shall advice you to verify the DataSource and check if it is still in use. If not, then you can delete the transformation and also DTP associated with the same.
Hope this helps.

SPM Transformation and Routine are missing in Delivered

Hi All,
        During the transport(From Devlopment to Quality) we received an error message as 'Transformation and Routine are not available in A Version'. Hence the transport has got failed.
I tried searching this Object(DSO - 0ASA_DS00) in RSOR - Business content, but all these objects are missing in the Delivered content itself. The Object and System details are as follows,
Object : DSO - 0ASA_DS00
             TRFN - The TRFN 0E2R8KR45M0H68POUF6JWA5J7TNA4DS9 is not available in Delivered content
             TRFN - The TRFN 0MM70WOQSHKX3SSQEDTOL7UAK90H15G8 is available in Delivered content, but the corresponding Routine is not available in delivered content
             TRFN - The TRFN 0E2R8KR45M0H68POUF6JWA5J7TNA4DS9 is not available in Delivered content
SAP_ABA          701          0008     SAPKA70108
SAP_BASIS                          701          0008     SAPKB70108
PI_BASIS                           701          0008     SAPK-70108INPIBASIS
ST-PI                                  2008_1_700                                                0003     SAPKITLRD3
SAP_BW          701          0008     SAPKW70108
ANAXSA          210          0005     SAPK-21005INANAXSA
BI_CONT          704          0009     SAPK-70409INBICONT
OPMFND          210          0005     SAPK-21005INOPMFND
ST-A/PI          01M_BCO700     0001     SAPKITAB7F
When I tried collecting object (DSO - 0ASA_DS00) with 'Only necessary object', I am not facing this error, but with 'In DataFlow before & After', we are facing this issue.
We also found 3 objects (TRFN's & Routines) are missing for PO & Invoice Process chains in the delivered content itself.
We need to transport this object at the earliest, can anyone please guide me, how to proceed on this?
Thanks..
Regards
Santhosh Kumar N

Hi Rajesh,
            Thanks for the guidance. I have checked the TRFN's & Routines in the Business content, but they are missing in the Delivered Version itself.
When we tried transporting the Spend Process chains for PO & Invoices, we are facing this issue.
Please let me know, if we need exclude this missing objects and start transporting Or Is there any other options to get these missing objects in?
Please find below the missing object details,
1. The TRFN 0E2R8KR45M0H68POUF6JWA5J7TNA4DS9 is not available in Delivered content
2. The TRFN 0MM70WOQSHKX3SSQEDTOL7UAK90H15G8 is available in Delivered content, but the corresponding Routine is not available in delivered content.
3. The TRFN 0E2R8KR45M0H68POUF6JWA5J7TNA4DS9 is not available in Delivered content.
4. The Object '8CXV3JV4FQR295IVBCHN69QBU' of type 'Routine' is not available in Delivered content.
Thanks
Regards
Santhosh Kumar N

Error while creating transformation for DSO in SAP BI

While creating a transformation for DSO in SAP BI, I got an error "Data source xxx (FS_xxx) does not exist in version A". I would like to know what this error is all about and how to resolve this issue.
Thanks.
Bhusan

Hi Bhusan,
You have to activate your datasoure to make it as an ACTIVE version.
SO in RSA1>Modelling>Datasouces--> find your datasource name and activate it first.
Then create your transformation and continue with other steps.
Hop it helps
Regards,
Arun.M.D

Errors While Transporting Transformations and DTPs

Hi Experts,
Iu2019m trying to transport transformations and DTPs from DEV to QA and am getting the following error messages. Does anyone know whatu2019s happening and how I can fix this?
Thanks,
Janice
The following are excepts from the log of the transport organizer with further SAP supplied information on the error messages.
Transformations:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
Activation of Objects with Type Transformation
Checking Objects with Type Transformation
Checking Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4
No rule exists
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Target RSDS 0ACCOUNT_TEXT QA1CLNT400 is not allowed
Message no. RSTRAN802
No rule exists
Message no. RSTRAN514
DTPs:
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Conversion of T version from DTP DTP_4FG5GXT9OLNN3YM3QFMW9V3W5 to M version...
Conversion of T version from DTP DTP_4FK894515QD0O9UM4JSJPIB91 to M version...
Activation of Objects with Type Data Transfer Process
Saving Objects with Type Data Transfer Process
Saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (cannot be executed)
Message no. RSTRAN715
Diagnosis
The transformation 06C3WE26JQY0VSZPNMOZFKD0W416PRU4 is inactive (not executable).
This can be caused, for example, by a change made to the source object or target object of the transformation.
The transformation connects the source to the target .
Procedure
The transformation must be reactivated.
Error saving Data Transfer Process DTP_4FKN7KAKCOLQ3ROIB7U7DV13A
Message no. RSO843

Thanks so much everyone for your suggestions. Iu2019ve tried them all and hereu2019s what I now have:
Anil u2013 Active datasources were included in the original transport. I tried retransporting and got the same error messages.
Voodi u2013 0ACCOUNT_TEXT was resident in the Q system as a 3x datasource. I replicated it as a 70 datasource in D and this is what was transported to Q. It is a 7.0 datasource in Q. I got the same error messages when I tried transporting just the transformations.
Jayaram - 0ACCOUNT is active in the Q system and is currently being used in transformations other than the one Iu2019m trying to import.
Godhuli u2013 I not only re-replicated the datasource in D, I reactivated the transformations and DTPs and resaved the InfoPackages. I tried retransporting with a new transport request and it failed with the same error messages.
Is there anything else anyone can think of?
Thanks,
Janice

TRANSFORMATION AND DTP

Hi all,
I have two questions:
1. If I have a 3x datasource..can i still use Transformations and DTP's with it in BI 7.0?
2. I have a cube and know the datasources. Could some one give me the modelling steps that come next... i am using BI 7.0 and want to use Transformations and DTP.
Thanks

1. If I have a 3x datasource..can i still use Transformations and DTP's with it in BI 7.0?
Yes - you can.
2. I have a cube and know the datasources. Could some one give me the modelling steps that come next... i am using BI 7.0 and want to use Transformations and DTP.
data loading in BI 7.0 from fla file extraction.
fisrt create one Cube or DSO with the same structure which you have in flatfile..
and activate it..
->now comes to Datasource tab> create one Datasource here you need to select type of data for example.. select Transactional data --> and menntion your flatfile name in extraction tab- and file type and eneter your info object names in FIELDS tab --> and load preview data Activate it..
now select your datasource and create info package and schedule it.. now your data will loded in to PSA level...
> and now comes to info provider select your cube.. and right clcik it.. and create transformations.,. and activate it..
> and create DTP -- Activate it.. and Execute it..
1)Create datasource. Here u can set/check the Soucre System fields.
2)Create Transformation for that datasource. (no more update rules/transfer rules)
2.1) While creating transformation for DS it will ask you for data target name, so just assign where u want to update ur data.
DataSource -> Transformation -> (DTP)-->Data Target
Now if you want to load data into data target from Source System Datasource:
1) Create infopackage for that data source. If you are creating infopackage for new datasources, it will only allow you update upto PSA, all other options u can see as disabled.
2)Now Create DTP (Data Transfer Process) for that data source.
3) NOw schdule the Infopackage, once the data is loaded to PSA, you can execute your DTP which will load data to data target.
Data Transfer Process (DTP) is now used to load data using the dataflow created by the Transformation. Here's how the DTP data load works:
1) Load InfoPackage
2) Data gets loaded into PSA (hence why PSA only is selected)
3) DTP gets "executed"
4) Data gets loaded from PSA into the data target once the DTP has executed
Hope it helps..

How to Activate Transformations and DTP in PRODUCTION

Hi Experts,
I Have done some modifications in datasource in R/3 when i treid to run the Infopacakge in BI, I see the Datasource is inactivate.
So I have activated the DS through the program in se38 rsds_datasource_activate_all, after that i see the transformations and DTP is inactivate.
In 3.5 we have program to activate the transfer rules and updates though rsds_transtru_activate_all i dont have idea for update rules program to activate.
*Is there any program to activate the transformations and DTP in Production.Rather than re-transport entire thing.*
Regards.

There is no activation program for Transformations. In order to do that in production, you would have to have the client opened for modification and manually activate the Transformation(s) that are in a deactivated state. This isn't advisable however. The best approach to activate deactivated Transformations is to capture on a transport in the development environment and move that transport throughout the landscape to production.
The SAP delivered ABAP program RSDKDTPREPAIR is available for activating DTPs. There is no selection screen for this program, however, and therefore it would try to activate all DTPs. This program should only be executed in background.
Here are the other activation programs in case you need them or are interested (I realize that you mentioned or more already):
RSDG_CUBE_ACTIVATE (InfoCube)
RSDG_IOBJ_ACTIVATE (InfoObject)
RSDG_MPRO_ACTIVATE (MultiProvider)
RSDG_ODSO_ACTIVATE (DSO)
RSQ_ISET_MASS_OPERATIONS (InfoSet - Requires client to be opened)
RSDS_DATASOURCE_ACTIVATE_ALL (DataSource)
SAP delivered program RSDS_TRANSTU_ACTIVATE_ALL is for activating Transfer Structures, which aren't relevant for 7.x DataSources.

Reg: Inactive transformations

Hi All,
Some times while transporting objects into Productions, transformations getting inactive.
In that case to activate transformations, we will retransport inactive transformations or we will open the Client ( very rare cases) and makes the inactive transformation to active in the system.
For this shall we write a progarm to make inactive transformation to active version in production.
Can you please provide ideas how to start this.
Thx,
Raj

Hi reddy,
i think might be the order of objects are not moving in sequence. while moving objects please make sure the order and this can be avoided.
transport sequence:
Info objects, data targets/info providers, data sources , transformations,infopackages etc
mahesh

Inactive transformations

Hi
We have few inactive transformations in prod due to some other reasons.Is there any way where we can activate them through a program or function module in production itself without client open.
Thanks
Pratap.

hi,
i think there is no tool to activate transformations.
Better activate them in Dev and transport into Production.
Hope this helps....
Reg
Pra

Transformation and DTP for upgraded 3.5 objects in BI 7.0

Dear Experts,
When I do a upgrade from bw 3.5 to BI 7.0, How do I create transformation and DTP for the upgraded objects. Do I need to create new transformation and DTP for these objects?.
Thanks,
Varun

If only needed nw2004s data flow(DTP,Transformation..) then migration required else you can stay with old 3.x dataflow.
Follow below links patiently it has wealth of information embedded.
For nw2004s data flow
Pre-requisite - 3.x datasource to be replicated as 7.0
and migrate datasource with "export datasource option" so that you can later revert back to OLD if needed.
nw2004s Concepts
new NW2004s Data flow
R/3---->PSA only (using Infopackage) for all the Loads -Mandatory
PSA -
>ODS/Cube -->load using DTP ,create transformation first
no Datamart architecture in NW2004s
so ODS -
>Cube load using DTP ,creating transformation first
Once loaded to PSA in DTP you have the option of FULL or DELTA ,full loads all the data from PSA and DELTA loads only the last load of PSA.
Go through the links for Lucid explainations
Infopackage -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/03808225cf5167e10000000a1553f6/content.htm
DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f98e07cc483255e10000000a1553f7/frameset.htm
Creating DTP
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fa50e40f501a77e10000000a422035/content.htm
Pre-requisite-
You have used transformations to define the data flow between the source and target object.
Creating transformations-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f8/7913426e48db2ce10000000a1550b0/content.htm
ODS to Cube -
http://help.sap.com/saphelp_nw2004s/helpdata/en/ce/dc87c1d711f846b34e0e42ede5ebb7/content.htm
Migrating update rules/transfer rules routines to Transformations - Trick
On the InfoSource Tab (Note- Ensure DataSource and Infosource have not been migrated)
1. Right Click > Additional Functions > Create Transfer Rules
2. Activate Transfer Rules
3. Right Click > Additional Functions > Transformation erzeugen
On the DataSource Tab
4. Create Transformation (Map to DSO, should map automatically)
5. Migrate DataSource
6. Create InfoPackage
7. Create DTP
Recover 3.x data source migration transformation
Transformation Rules
Hope it Helps
Chetan
@CP..

How do I "Init without data transfer' using 7.0 transformations and DTP's?

I have a data-mart situation where I have a standard DSO object that sends deltas up to a standard cube. This data flow is created with 7.0 transformation and a delta type DTP and has been running fine.
I now have a new single activated request loaded to the DSO object but I DO NOT want this request to delta update to the cube. In 3.x, I used to go into the init infopackage, manually delete the initialization pointer, and run a 'Initialize Without Data Transfer' to make this work. Deltas could then continue as before.
I do not see a way to do this using 7.0 transformations and DTP's. I want to reset the init from DSO to cube so this request does not get updated. Does anyone have step by step ideas on how this can be accomplished?
Thanks in advance for any help on this issue.

Hi,
delete the data in the cube by using oprtion selective deletion based on request number.
(if delta request is deleted from cube, with next load last delta records will also come)
in this scenario there is no need to delete initiaizations option.
in BI 7.0, initialization load is not there.
see below documentation on DTP in SAP help.
"On the Extraction tab page, specify the parameters:
a. Choose Extraction Mode.
You can choose Delta or Full mode.
In contrast to a delta transfer with an InfoPackage, an explicit initialization of the delta process is not necessary for the delta transfer with a DTP. When the data transfer process is executed in delta mode for the first time, all existing requests are retrieved from the source and the delta status is initialized. "
Link: [http://help.sap.com/saphelp_nw70/helpdata/EN/42/f98e07cc483255e10000000a1553f7/frameset.htm]
Regards
Daya Sagar

Inactive Transformations and DSO

Similar Messages

Maybe you are looking for