INACTIVE USERS

Hi gurus,
its urgent, pls help me.
i have to create a report on bw statistics (i know the procedure and using bw statistic standard reports also) i have to find out
1. Inactive users (Never Access the system).
2. Reports that failed
3. Cube Sizes, Growth trends and Free disk space
Thanks in advance for your help
regards
mahi

Hi Mahesh,
The BW Statistics OLAP InfoCube (Technical name: 0BWTC_C02) contains data arising from the
execution of queries.
Reporting on this InfoCube enables you to see how often a particular InfoCube or query is used.
Detailed information is also available, about run times, data volumes and users.
Refer this link for information on the Characteristics and Key Figures of this Infocube.
http://help.sap.com/saphelp_nw04/helpdata/en/52/e91c3b85e6e939e10000000a11402f/frameset.htm
You can refer TBW10 - Data Warehousing.
It contains detailed information on BW Statistics and BW Data slice.
Most BW Statistics queries are assigned to the BW Statistics MultiProvider.
Some other queries are assigned to the InfoCube BW Statistics - OLAP,
Detail Navigation and to the InfoCube BW Metadata.
At user level, you can analyse
1) Which users are currently working in the system?
2) Which departments or users have used BW within a particular time period?
You can get information about Inactive users from this.
You can get information about queries, whose runtime has overshot a specified value for
online-processing.
BW Statistics: Workbook
The 'BW Statistics' workbook is also delivered with Technical Content which contains
many queries and charts for analysis.
You can analyze Usage(By users/By Day, By Queries/ By Run time/ By Infocubes etc),
Data Volumes and Load etc.
Hope this helps.
Regards
Hari
Message was edited by: Hari Krishnan K
Message was edited by: Hari Krishnan K

Similar Messages

Bonjour + Fast User switching = messages going to the wrong (inactive) user

We use iChat for Bonjour in our office– fast file transfers etc.
If a user is one of 2 or more logged in on a machine– through the use of fast user switching, we've noticed that incoming messages (initiated by another user on the network) will often go to the switched user (i.e. the inactive user) not the user we're currently logged in as.
We've been able to repeat the issue.
1. Log in as user 1, fast user switch to user 2 (leaving user 1 logged in but inactive)
2. Go to new machine, log in as user 3
3. Send message from user 3 to user 2
4. Look at user 2 screen. No messages
5. Send message from user 2 to user 3. User 3 will receive message, and will be able to send message successfully back to user 2.
6. Log out use 2
7. Log in as user 1
8. Notice all the messages that were going to the 'inactive' user profile.
Has anyone else seen this type of behavior?

HI MAtthew,
Welcome to the Apple Discussion Pages.
I have not seen this (I only have one Mac).
However there is an item in IChat Preferences > General section that can set the staus of the Users account to Offline or Away when using Fast User Switching.
What is yur set to and does it make any difference when changing it ?
Away in normal circumstance menas someone can still Invite you to chats (or Text you)
Ralph

How can I delete old & inactive user account datawith a script?

there is a mac 10.4 server that has many old user folders. too many to delete one by one. there is no grouping of users. all of them are in the /user folder
I want a script that will check the folders in the /user direcotry against the OD users. If a user for that folder does not exist then it will rm or move to trash or an /inactive users or /olduser folder.
thanks for any help
it is the same question in this thread but was not answered really well at all
http://discussions.apple.com/thread.jspa?threadID=1081185&tstart=0

Well, the problem with rm the folder is that it still leaves data hanging around (profile, home drive, etc.) I was really hoping for something that would sweep up everything from people that are no longer in the OpenDirectory database.
Anyway, I'll close this question by saying thanks for trying.
Later...
Richard

How to restrict attachment of inactive user IDs for forwarding document.

Dear All,
We have some temporary IDs in the system which is now inactive in the system. Now in some applications where users select user IDs at their own for forwarding certain document to someone. Erroneously the sometime select the in active IDs. Which result in non delivery of the document.
Is it possible to rectrict selection of inactive user IDs?
Regards,
Abdullah

Hi
Try to look at infotype 0105 subtype 0001 for getting active users.
Ideally all these ID should be active
if not then they should be another check for Employment Status '3' from Infotype 0000
Thanks
RAjdeep

'Created by' column in SM37 contains inactive users - audit issue?

Hi,
Most of the jobs in sm37 in our systems have been created by staff who had already left. So under the 'created by' column in SM37 we can see jobs running under users who have been locked/deleted. But it's only the 'created by' column. All the 'steps' run under a system user called 'BATCHUSER', that's why the jobs run fine.
Is it a problem to have inactive users under the 'created by' column in SM37? Is it an audit issue? I've thought that as long as the steps run as a system user then it shouldn't be an audit issue but having discussing about it in my team.
Any comments will be very welcome!
Thank you
Marcia

Yes,
This is purely depends on your org understandness, As in system there won't be any issue as long as the jobs run.
In SAP there is no such way to change the owner (Created by) of background job, we only can change the step owner.
If you feel that there will be an issue, my suggestion is to copy the jobs to BATCHUSER and delete all old jobs created by inactive users.
Regards,
Nick Loy

Finding Inactive users in 30 minutes.

I use this technique to find iplanet 5.x inactive users.
NOTE: In each mailbox root there is a file store.idx which get update everytime a new message recieved.
find /your/path/to/store/partition/primary/=user -mtime +45 -name store.idx -type f > inactive
this will put all inatcive mailboxes paths which are inactive from last 45 days in a new file "inactive"
the result will similer to
/your/path/to/store/partition/primary/=user/57/21/=aliejaz1/store.idx
then i use these commands to remove useless lines which refer to Sent, Draft and Trash folders.
grep -v Sent inactive > SentRemoved
grep -v Draft SentRemoved > DraftRemoved
grep -v Trash DraftRemoved > TrashRemoved
grep -v + TrashRemoved > CustomFoldersRemoved
Then I also manualy remove all those lines which refer to remaining Custom Folders.
Then by using Find and Replace I replace /your/path/to/store/partition/primary/=user/ with space.
Now it becomes like 57/21/=aliejaz1/store.idx
then I also replace store.idx with space and result become like 57/21/=aliejaz1
Now I replace = with comma i-e , and results become 57/21/,aliejaz1
then I use Excel and open final file as csv.
It will paste 57/21/ in first column and aliejaz1 in second column.
Delete the whole first column.
Now the excel file only contains inactive userids.
That way I found my inactive users.
Good Luck.
Note that if a user still recieving email or spam then it cannot be find this way but there is a chance that his mailbox 100% filled along time ago due to inactivity
I found 90% inactive users by using this mechanism.
For remaining else users check your logs.

Hi,
I would highly recommend against other customers using this approach for a few reasons:
1. A 'find' across the entire store can impact the inode-cache and overall disk performance substantially. A better approach would be to parse the "last msg date" out of the output of "./mboxutil -l" or even "./mboxutil -lp user/%/INBOX" if you just cared about the INBOX. This will cater for users who haven't had a new email for 45 days in their INBOX.
2. Doesn't cater for the case where a user is forwarding their email; the mailbox/account is 'active' just that the contents may not have changed.
3. Doesn't cater for accounts that haven't received new email in 45 days but the user is still reading the old emails - reading an email only updates the store.usr file, the store.idx is only changed if the email is deleted/expunged.
4. Doesn't cater for accounts that are used as 'public shared folders' where emails may only be delivered to very occasionally and not deleted.
In MS6.3 there is another mechanism to monitor when a customer last accessed their account; the ./imsconnutil command e.g.
# ./imsconnutil -a -u shjorth
UID IMAP last access HTTP last access POP last access
===================================================================================================
shjorth 07/Nov/2007:11:42:57 ----NOT-RECORDED---- ----NOT-RECORDED----Given that iMS5.2 is now in limited support you should be upgrading to MS6.3 anyway.
Regards,
Shane.

Logon inactive user without disabling switch user

Is it possible to logoff inactive users on a Windows 7 pc, which are logged on but as a result of switch user aren't active any more.
Example:
I have user 1 to 10 and all users are logged in but every time teh new users logs on with the switch user option. Because the last user locked the station.
I want to switch of or log off these inactive users after a certain time of inactivity.

Hi,
To force an inactive user to log off may result in a data lose. However we may consider to use some scripts to log off the idle Windows session (the inactive users), or consider to use screen saver.
A similar thread for reference:
Automatically log off users when logon time expires
For the scripts, we may consider seek help in some scripts forum.
Best regards
Michael Shao
TechNet Community Support

Reactivate inactive user in CLM sourcing buyer

Hello,
We are using CLM 9.0 and need to reactivate an inactive. The user does not showup in the search list for unchecking the "inactive" checkbox and we are not able to recreate the user either.
Thanks
Vijaya

Hi Vijaya,
By default the inactive user does not show up in the list of Internal User Accounts. You will need to modify the search criteria by clicking on 'Modify Search'. Once the search criteria screen is displayed select the 'Inactive' field from the drop down, set it to true and hit search. It will list all the inactive users in the system.
Hope this helps.
Thanks,
Arijeet

How to find inactive users

Dear All
We want to create a report so that we can find out who are no more employees of our organization.
The purpose is to remove thier usernames from the shared folders.
Is there any way to find out inactive users so that we can go ahead and create an ibot to monitor it on timely basis?
Your help is much appreciated.
Regds
Mano

DS Command is going to be your friend. Here are some exmaples
http://social.technet.microsoft.com/wiki/contents/articles/3537.active-directory-active-directory-domain-services-ad-ds-commands-and-scripts.aspx
User DSQUERY USER instead or COMPUTER
http://portal.sivarajan.com/2010/03/delete-stale-or-inactive-computer.html
Santhosh Sivarajan | Houston, TX
Windows 2012 Book - Migrating from 2008 to Windows Server 2012
http://www.sivarajan.com/
This post is provided ASIS with no warran

Total number of active and inactive users

Hi All,
i have to count
The total number of users.
Total number of active and inactive users.
Total number of users after 90 days of inactivity:
I have gone through the below thread, but it is showing the user info. but not count.
http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_esb_techref/maxl/ddl/statements/dispuser.htm
Please let me know how to write MaxL command or some other way to count the users.
Thanks,
Prathap

I doubt whether you are going to get the count using maxl, if the command you are using is producing information you can use then you might have to spool to a file and then parse the file and get the count values e.g. excel, scripting.
Cheers
John
http://john-goodwin.blogspot.com/

Diminishes timeout of the inactive user in the portal

Hi
Please, which parameter that diminishes timeout of the inactive user in the portal to netweaver 7.0?

Hi Saurabh,
you can do this by modifing the headerIview.jsp by using session variables.
when a user logs into portal you have to keep his details in a session and check them everytime when he tries to login again.if it is not the first time then throw and error message
you need to change the par file. code will be something like this
session.setAttribute("user",request.getUser());
if(session.getAttribute("user")!=null)
And for preventing from backend -
By changing the parameter - login/disable_multi_gui_login you can do this.
Check below sap link - http://help.sap.com/saphelp_erp2004/helpdata/en/22/41c43ac23cef2fe10000000a114084/frameset.htm
Regards,
Sen
Edited by: prodyut kumar sen on Dec 20, 2010 1:22 PM

Os x server disconnect inactive user

i have an OS X Server 10.6 and one with 10.7.
i'm thinking of getting an OS X Server Mavericks.
Now my Question:
On the old Server there was an option to disconnect inactive user after an certain ammount of time.
i can't find this option an the 10.7 server and heard about this option is lost on 10.9 too.
Is this right and why should apple reduce the options to configure a server.
Best regards from germany, Frank Kueper.

Hi Linc,
thx, this solves my problem, but why aren't these options in the GUI any more?
To make settings in the commandline is so oldschool and not userfriendly.
Why?

90 day inactive user report

Hi Folks,
1. want to generate the list of AD user accounts are inactive for the past 90 days and export the report to a .csv file.
PS: I have more than 100 OUs in the DC and i want the export .csv file should be contain like below format.
OU Name|first name|last name|Display Name|user logon name|lastlogondate|passwordlastset.
2. I want to generate a report for Active Directory user accounts that have not logged in for 90 days and export the report to a .csv file.
Any help would be appreciated. Thanks.

I would recommend Joe Richards' free oldcmp tool. It can search for (and cleanup if desired) inactive computer or user accounts.
http://www.joeware.net/freetools/tools/oldcmp/index.htm
Richard Mueller - MVP Directory Services

Inactive user list

Hi,
I'm trying to create enterprise list. i've added add.jsp file from the SAP note 1401058. It throws exception error in jsp.
I tried to run in the query builder and it threw error for one user. I've deleted that user and ran the same URL given in the note. The error popped out for the other user saying that particular user is not available in the given domain.
Could i please get a query to find out the list of all inactivy users?
Thanks,
Dilip

Hi Ankit
The same thing, there is no standard report. Use SQVI for that, the field is NPAT-INACT
Here is an article where you could learn about SQVI and Sap query
http://allaboutsap.blogspot.com/2007/09/sap-query-step-by-step.html
With best regards
Matías

Report of Inactive users

Hi
How to extract the users list who are inactive in the month of Nov,Jan and Feb. Have to filter the users month wise of the past month.how is it possible..
Thanks in Advance!

Hi Naveen,
Julius has told you the correct transaction / report, but to get such a specific set of users that haven't used SAP in a particular month seems a strange query. You can get such information if you run RSUSR200 on a monthly basis, but if you are not doing such monthly checks then there is no easy way of doing this.
We have some bespoke code on our systems, that track user usage by date, so we can see if a user has been active in a specific month, but that was for a specific audit requirement and it also underpins our fire fight system (which we developed before the Virsa / SAP solution came along).
Going back to Julius' original point, RSUSR200 will show you every user and when they were last active on a system, so running this at the end of each month, will show you who didn't access SAP in that month - but it will also show you everyone else who also had not accessed SAP in previous months too.
If someone is not using SAP, surely the month they are not using it is not really important. If it is you might have to develop some monthly processing, which you can use going forward.

INACTIVE USERS

Similar Messages

Maybe you are looking for