"Inadmissible movement type-acceptance at vendor set for PO item"

Hi,
Can any body tell me how I could solve message in MIGO"Inadmissible movement type-acceptance at vendor set for PO item"
Regards,
Anil

Go into your PO detail delivery tab, there you will find origin accept indicator ticked.
Inadmissible movement type -Message no. M7429

Similar Messages

  • While making 103 mvt for PO error'Aceptance at vendor set for po Item'

    Dear Sir,
    While making 103 mvt for PO, we are getting error 'Acceptance at vendor set for PO item'
    Rgs
    Kumar

    Hi
    Check the PO delivery tab. Origin acceptance will be flagged. It means material is accepted at vendor's premises. You need to use movement type 107 which will take stock to valuated GR blocked stock.It means once you do 107 material is valuted in your books. Then 109 to bring to your stock. You should not do 103 and 105 if the origin acceptance is flaged in GR.
    Regards
    Antony

  • Inadmissible movement type -Message no. M7429

    Hello
    While doing the PGR for Inbound Delivery
    We are getting the following error
    Inadmissible movement type  - Acceptance at vendor set for PO item
        Message no. M7429
    What could be the possible reasons
    Regards
    Niti Narayan

    Please check in PO line item,
    in Address details. it might be ticked at vendor adress check box with vendor address no.
    is ur scenario is while GR , stock should be increased at vendors end ?
    regards,
    sujit

  • Field selection for movement type 601 account 894025 differs for cutomer

    While posting goods after saving delivery merror message
    Field selection for movement type 601/aact 894025 differs for customer goods movement
    I tried OMJJ>Mvtmt Type>601>Field selection enjoy>601  KONTO  Optional field
    Now this is only happening in the cases where I have assigned free goods Inclusive 10MT. If the order is less than 10MT (that is if no free goods attached) posting is accepted & billing & account determination is processed successfully.
    I am unable to identify the reason though I have worked a lot on MM/Fico on the system.
    Please provide your valued inputs why this is happening?
    Thanks for your time.
    Rajiv

    Hi Raja,
    Thanks for prompt reply.
    I shall appreciate if you elaborate how to check
    check the Field selection goup in control tab for that GL 
    I tried OBC$--> (Is this correct?)
    I checked cost center field G004 -->Addl Act assignemtn -->Cost center which is Optional entry. Should I check any other items on the screen as I am unable to understand which field is applicable on a/c field.
    Profit center, cost object are  in G004 as supressed field.
    So should I make optional? So thing will work.
    Other Q should I also consider G025 Inventory adjustment account? As per error this a/c is not shown. So pl advise me steps or heading which I should consider.
    Thanks for yr time.
    Rajiv

  • Fld selection for movement type 601/ act 425000 differs for customer goods

    hi all
    When i try to do PGI for delivery, i am getting given below error.
    "Fld selection for movement type 601/ act 425000 differs for customer goods movement (015)" Please guide me to solve this issue. Rgds
    Madhavan
    Edited by: Madhavan SR on Apr 14, 2010 3:09 AM

    Hi,
    Please run report RM07CUFA for the movement type and account, and check the field selection for
    "Customer goods movement" if the setting is consistent or not.
    Thanks and regards,
    Polly

  • Recall process movement type configuration and account assignment for 671

    Hi Gurus-
    We have a retail recall business scenario.
    1. Create STO from Distribution Center and receive goods with 671 at DC from the store. If the store moving average price is $1.10 and at DC Mov. Avg. Price is $1.00. GL account for Inventory posting at DC is updated with store Mov. Avg. Price and the difference is posted at the Proce Difference account (PRD) account. In other words DC account gets updated with $1.00 and $0.10 is posted in PRD account.
    The problem-
    1. Is there any configuration to configure the movement type or recall document type to post to DC account at Store Retail moving average price ($1.10) without posting the PRD account? If not, any user exit that we can diploy to take the store mov. avg. price ($1.10) at the time of posting against delivery for 671?
    2. Also, if we are able to post the delivery with Store mov. avg. Price, the moving avg price at DC is likely to get updated with $1.10. How we can avoid that? Leave the moving avg. price at $1.00 at DC
    Please help! Reps for sure.
    Thanks!

    Hi Gurus-
    Can someone please shed some light on this?
    Thanks in advance!

  • Make movement type 201 as follow on for 311

    Would like to know if it is possible to make movement type 201 as a follow on for 311. The requirement is to first transfer an item from one storgae location to another location and then issue it in the receiving location.
    Thanks and regards,
    Jon

    Hi,
    I think any option that you follow to do this will require some form of ABAP. Either you could create a bespoke screen which will complete both movements, or you could investigate the option of adding an output to the first movement to automatically complete a 201 movement. It depends on the info you need to complete the 201 movement and where you are going to source this information from.
    Steph.

  • Transaction/Movement type on the vendor line item

    When we post to a vendor using F-43 (or FB01) using posting key 31. We want the field Transaction type to be available for input in the vendor line item. But this is not happening. note: In the FSG of vendor recon account and Posting key 31 this field is optional. On the other hand, this field is available in the GL line item. Please also note that I am not talking here the transaction type available for asset posting
    Please advice
    Thanks
    Ranjit
    Edited by: Ron on May 14, 2010 2:39 PM

    Hi Ranjit,
    Perhaps it was hidden. Please check System -> Status. Double click the screen number. You will get to the next screen. Goto -> Layout or click the layout icon. You will see the screen layout that being used in F-43. To modify this, please get the ABAPer to assist.
    Regards
    Fauzi

  • Movement Type 351 against scheduling agreement for future dates

    Dear Gurus,
    For stock transfer orders(Inter Plant Transfers), if the schedules in receiving plants are available only in future(say after 15 days), the sending plant is able to make 351 against such scheduling agreements today itself.
    Is there any way to control 351 movements against these scheduling agreements.
    Please reply.
    Points would be awarded.
    Regards
    Shankar

    Hi,
    we are taking multiple GR against Scheduling Agreement hence for Parking Invoice we are using "Delivery Note" as reference.
    but when we maintain delivery note system is not showing multiple GRs against Scheduling Agreement
    Invoice Parking is not done against these Invoice
    Please advce

  • Fixed and desired vendor setting for PR - PO

    Hi friends ,
    In my PR I have entered vendor no in Fixed vendor column still ini PO its asking for vendor .
    This is the case in my sanbox
    and when I am testing in Quality , I have entered value only in desired vendor still the vendor field in PO is greyed out .
    Is there any seeting for this .
    regards
    AM

    Hi,
    1st fix the vendor in source list(ME01) and also maintain the info record(ME11).During PR creation(ME51N) select check box of Source Determination.
    Regards,
    Biju K

  • Goods receipt indicator is PO is not set for Stock -item

    Hi Gurus,
    I have created PO for a raw material but it is so strange that the Goods receipt indicator in Delivery tab is not set (it is greyed out also). Then, I cannot do Goods receipt for PO anymore.
    Normally, this Goods receipt indicator is set automatically if material is stock-item.
    Can anyone help me find out the reason?
    Thanks,
    Hong

    Hi,
    For the material type RAW MATERIAL ,  aganist your plant ( Which is given in the PO) have you activated QTY UPDATE check box?
    Check in the transcation OMS2
    Select your material type and click on the Qty update / Value update ( Which is in the left hand side window).
    Check QTY UPDATE check box aganist ur plant code. If not activated, check / activate check box.
    If this check box is activated, then only GR checkbox is activated in the PO - Delivery screen
    Regards
    KRK

  • Setting for new item category

    Hi friends,
    Company's requirement is to Create new Item Category and respective settings for normal business process.
    please let me know, what all the mandetory setting which i need to do for normal business process.
    As i know , item category determination in VOV4.
    please tell me, the main mandetory setting which should be maintained.
    thanks in advance.
    VARMA

    Dear Ravi Varma,
    Please copy the standard ITEM CATEGORY based on your scenario and then save in VOV6.
    Assign the same for your document type in VOV4.
    Another important thing you have to keep in mind is you have to include this NEW ITEM CATEGORY in the copy controls as well.
    (in VTLA & VTFL)
    Please check and revert back.
    Thanks & Regards,
    Hegal K Charles

  • Is it possible auto TO for movement type 561? if so, how ?

    Hello,
    Could  any one suggest whether auto TO possible or not for movement type 561?
    regards
    rk

    Hello,
    when a transfer requirement or a posting change notice is created from the movement type,the transfer orders are created by batch input using the report RLAUTA10 (for transfer requirements) or RLAUTA11 (for posting change notices).
    You post the document using 561 movement type. If related setting for auto TR creation (T-code OMKX) is done then TR will be created in the background. You can create the TO automatically from this TR using  report RLAUTA10. Refer T-code OMKZ for Auto creation setting. You can also proceed for immidiate creation of TO.
    Thanks
    Milind

  • GR/GI slip print option to be set as default  for movement type 311

    HI,
    I am required to do transfer posting by using tcode MIGO . In this the slip(GR/GI) print indicator is currently not checked  . I need to check  it every time to get the print .
    PLease tell me how can i set this option to be always set as checked as default setting . I need to do this movement type 311 specific.
    Waiting for your reply
    Thanks
    Rohit Chavan

    Hi
    If you are looking at having the print checkbox selected automatically when you goto MIGO, set the parameter ID NDR in your user master record as X.
    Regards
    Prasad

  • How to stop Accounting Entries for certain Movement Types

    Hello,
    We are using Movement Type 511 to record free of charge receipts from vendors. Still it is generating Accounting Entries with Standard Material Price.
    Is there any way to stop Accounting Entries for 511 and other Movement Types, where external business partners are involved ?
    I tried IMG Setting "Define Account Grouping for Movement Types", where I did not tick in the field "Value Updates". But it did not work.
    I believe, Account Grouping settings at the level of combination of Plant and Material Type takes precedence. There I have ticked in the field "Value Updates". So even if create a new Movement Type, with no tick in the field "Value Updates", it creates Accounting Entries for free of charge receipts from vendors.
    Is there any way to stop any accounting entries in such cases ?
    Basically I want 311-like movement type, but where external business partners are involved.
    Thanks and Regards

    Hello,
    Thanks to you all for your quick reply.
    I created a new Movement Type - copied it from 511 and made the changes as per your suggestions  - disabled field "Value Update" in "Update Control / WM Movement Types".
    Using MIGO when I try to receive the material, it gives me error "Update Control of Movement Type is Incorrect"
    Any reason for this error ? I have disabled even "Check Account Assignment" in Account Grouping
    Thanks and Regards

Maybe you are looking for