INBOUND AND OUTBOUND DETAILS SAME: Problem

Hi Guys
I am facing problem regarding the inbound and outbound details. My scenario is bypass scenario, sender is JMS and receiver is R/3 system. Both the sender structure and the receiver structure are same. It has two SWC one for sender n one for the receiver. we r importing the idoc and using taht as External Defination. In the document , i am seeing the OUTBOUNd and Inbound details are same, such as the SWC which is being used for the receiver is being used for the outbound details, also the namespace and name of service  interafce and the message type are being given the same here(all these are the IDOC name i.e IDOCMSGtype.IDOCname). 
i have been asked to follow the document for my refrence.
please help me out. is it the correct process or any changes have to be made???
thanx in advance
Edited by: VArjun86 on Mar 4, 2010 7:37 AM

answered

Similar Messages

  • Re:integration testing inbound and outbound details

    Hi Gurus,
                I am been asked to provide the Inbound and outbound details of BI for the sake of Integration testing.Can anyone please advise me what type of details we need to provide as being  BI consultant .In our case source is CRM.Please share your valuable  knowledge or documents with me..that would be much appriciable.
    Regards
    Kranthi

    answered

  • SAP inbound and outbound delivey in single shipment document

    Hi
    We are doing outbound and inbound delivery creation in SAP. These are dropped to OTM(oracle transport management system). OTM will create orders for deliveries and groups multiple deliveries into one shipment. This is sent back to SAP for shipment creation. Problem we have is SAP can have either inbound deliveries Or outbound deliveires in a shipment. Based on inbound shipment or outbound shipment in shipment document type. OTM does not has this restriction and can bundle both outbound and inound in single shipment.
    Business scenario we have is multi pick and multi drop, where there is possibility that 1) inbound del from vendor for PO            2) Outbound del to customer for SO and 3) outbound/inbound del for STO from RDC to DC in a single sipment.
    Please advice ow this can be achieved in SAP.
    Best Regards
    Edited by: M.N. Phani Sai on Oct 28, 2010 10:34 AM

    It is not possible to involve both inbound and outbound deliveries in the same shipment. SAP has its deficiencies...
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/inbound-and-outbound-delivery-in-the-same-shipment-3512217
    http://help.sap.com/saphelp_erp60/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
    You cannot place outbound deliveries and inbound deliveries together in the same shipment document. Nor is it possible to assign Items from a delivery or an inbound delivery to different shipment documents. You must decide at the delivery stage whether order items can be shipped together in one delivery and therefore require only one shipment.
    Edited by: Csaba Szommer on Oct 28, 2010 11:05 AM

  • Sharing Handling Units between Inbound and Outbound Delveries?

    Hello-
    I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
    1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
    2.) Purchase Order is sent to supplier.
    3.) Shipping Label is generated in SAP and is assigned a Handling Unit.  Label is sent to supplier.
    4.) Supplier affixes this label to product and ships it to our warehouse.
    5.) Goods Receipt is performed via Purchase Order (MIGO). 
    6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
    We would like to do a few new things with this process.
    A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it. 
    B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer. 
    Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery? 
    Is EWM Cross Docking the best way to accomplish this? 
    Are there other proven approaches?
    Thanks for your time and help.
    -Ron

    hi friend
    Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the  material
    like FG  material and tray
    identification number controlling the handling unit numbers.
    with regards
    dinesh

  • Seeking recommendations for handling large binary documents with security(preferable) for inbound and outbound scenarios from OSB- SOA and SOA- OSB

    Hi,
    I am currently working on a project with the following requirements
    1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
    2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
    In otherwords, a inbound and outbound integration.
    What I have tried so far and my results:
    Scenario A
    1. Enabled MTOM on SOA composite by attaching wsmtom policy
    2. Created an OSB business service and consumed the SOA composite application
    3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
    Scenario B
    1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
    2. Created an OSB business service and consumed the SOA composite application
    3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
    I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
    Result for Scenario A with file size less than 1 MB:
    Flawless execution with sub-second response times
    Result for Scenario A with file size of 8MB
    First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
    Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
    Result for Scenario B:
    The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
    I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
    I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
    Thanks
    regards,
    Johnny

    I think this is due to the underlying mechanism of weblogic classloading..
    You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
    1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
    2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
    3- Get the oracle support admins at your client site to approve your request for support access.
    4-Once they approve , you can access the support site and raise service requests.

  • To Monitor inbound and outbound messages for ECC 6.0 business system

    Hi Guys,
    I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
    XI server is on a different system.
    I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
    And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
    When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
    Thanks,
    James.

    James,
    Go to SXMB_MONI in your sending system.
    Here you will find a message ID fro your Message.
    Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
    Likeiwse it can be traced in the target system as well.
    The basic point,  The messages will have same Message Id on your R3 and on XI.
    Regards
    Bhavesh

  • Regarding Inbound and outbound interfaces in ABAP HR

    Hi,
    Iam new to SAP. Can you send the document related to Inbound and Outbound Interfaces in detail.
    i.e What these interfaces comes under and steps to develop these inerfaces.
    Thanks&Regards,
    B.Thulasi.

    Hi,
    Iam new to SAP. Can you send the document related to Inbound and Outbound Interfaces in detail.
    i.e What these interfaces comes under and steps to develop these inerfaces.
    Thanks&Regards,
    B.Thulasi.

  • Degugging Inbound and Outbound idocs

    Hi friends,
    Can any one help me in debugging Inbound and outbound IDocs?
    1.I found the inbound FM using Tcode we19,clicked the inbound FM button and called it in the debugging mode.
      While debugging the Inbound FM iam nt able to figure out the actual problem.Is there any way to reach out the exact problem?
    2.How to find out the outbound Idoc FM and debug it?
    Your help is appreciated.
    Thanks in Advance.

    Hi,
    Inbound or Outbound IDoc processing FM can be found iin partner profiles(WE20).
    for Outbound: WE20 --> choose partner type --> Outbound parameters --> choose message type --> Message control Tab --> Double click on Process code to get the FM assigned.
    for inbound: WE20 --> choose partner type --> Inbound parameters --> choose message type --> inbound options --> Double click on Process code to get the FM assigned.
    For debugging, use Tcode WE15 for outbound, But before that u need to set the output type dispatch time as 1 (Send with periodically scheduled Job). Go to Output type assignment screen --> assign the output type --> choose further processing --> Set Dispatch time as 1 --> Save.
    Note: U need to keep the break point in the Outbound FM or exit if any before going to WE15 to debug from that point.
    Hope it helps,
    SG.

  • Gl balance inbound and outbound

    Hi sap gurus,
    We are having legacy systems that should interact with sap.I need to know the following for the GL balances through inbound and outbound
    1.How data will flow parallely into sap.what steps i have to follow to do this.
    2.what user exits or idocs or interfaces i have to use.
    3.how the GL balances data will trigger into sap.
    Plz help.This is most urgent for me.
    Thanks in advance
    Kiranmayi

    Hi Vijay,
    I am assuming that you are asking about inbound and outbound process.
    These process comes under SAP Electronic Data Interchange (EDI)
    Outbound process--> When a document is sent from SAP system to any other system (to business partners say bank or vendors).
    eg sending a quotation to vendor.
    Steps:
    1. Application doc is created
    2. IDoc is generated
    3. IDoc transferred from SAP to the Operating System layer
    4. IDoc is converted to EDI standards
    5. IDoc transmission to business partners
    6. Status report sent to SAP system.
    Inbound process is reverse of Outbound process-->When a document is sent from business partner to SAP system.
    eg Bank sending account statement.
    Steps:
    1. EDI transmission received
    2. EDI Doc is converted into IDoc
    3. IDoc transferred to SAP layer
    4. Appication document creation
    5. View appliation doc.
    ALE (Application Link Enabling) method uses tRFC (Transactional Remote Functional Call) port for communication and refer to same concept mostly.
    Hope it helps.

  • Monitoring of inbound and outbound messages for business system ECC 6.0

    Hi Guys,
    I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
    XI server is on a different system.
    I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
    And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
    When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
    Thanks,
    James.

    James,
    Go to SXMB_MONI in your sending system.
    Here you will find a message ID fro your Message.
    Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
    Likeiwse it can be traced in the target system as well.
    The basic point,  The messages will have same Message Id on your R3 and on XI.
    Regards
    Bhavesh

  • EJB - inbound and outbound proxy

    I have implemented inbound and outbound proxy to transfer file. In proxyFTPClientREQIB method of ProxyFTPClientREQIB_PortTypeImpl class I want to invoke outbound proxy that sends structure to XI. I have a problem with context, because after invoking outbound proxy method from inbound proxy there is an incorrect context (concatenation of EJB inbound context and EJB outbound context: ejbContexts/bcc.com.pl/MonaApp/bcc.com.pl/MonaApp/ProxyFTPClientREQIB_PortTypeBean and localejbs/bcc.com.pl/MonaApp/ProxyFTPClientRESOB_PortTypeBean)
    Context ctx = new InitialContext();
    proxyFTPClientRESOB_PortTypeLocalHome = ProxyFTPClientRESOB_PortTypeLocalHome) ctx.lookup("localejbs/bcc.com.pl/MonaApp/ProxyFTPClientRESOB_PortTypeBean");
    proxyFTPClientRESOB_PortTypeLocal = proxyFTPClientRESOB_PortTypeLocalHome.create();
    Error:
    Path to object does not exist at localejbs, the whole lookup name is ejbContexts/bcc.com.pl/MonaApp/bcc.com.pl/MonaApp/ProxyFTPClientREQIB_PortTypeBean/localejbs/bcc.com.pl/MonaApp/ProxyFTPClientRESOB_PortTypeBean.
    What should I do to avoid concatenation of contexts?

    Hi Julia,
    the correct call is:
    ... ctx.lookup("java:comp/env/ejb/ProxyFTPClientRESOB_PortTypeBean");
    The Reference to the JNDI name is done in the ejb-jar.xml:
    <ejb-local-ref>
      <ejb-ref-name>ejb/ProxyFTPClientRESOB_PortTypeBean</ejb-ref-name>
      <ejb-ref-type>Session</ejb-ref-type>
      <local-home>YourLocalHomeInterface</local-home>
      <local>YourLocalInterface</local>
      <ejb-link>ProxyFTPClientRESOB_PortTypeBean</ejb-link>
      </ejb-local-ref>
    Hope that helps,
    Stefan

  • In WM is it possible to have a TR's for Inbound and Outbound deliveries?

    Hi All,
    In WM is it possible to have a TR's for Inbound and Outbound deliveries?
    In WM is possible to create a TO without TR being created?
    Please let me know the configuration for the same!
    Thanks in advance,
    Kumar

    The delivery itself is treated as transport request, hence you cannot get an extra TR.
    Using LT01 with movement type 999 will create a TO without needing any TR.

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • How to add Total Quantity in Inbound and Outbound Delivery screen

    Hi,
    I want to add Total quantity field in Inbound and Outbound Delivery screens.
    In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
    in Change Layout--> Display, i didn't see any totals displayed.
    Please help me on this?
    Regards
    Bhuvana

    Hi
    If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
    Regards
    Eduardo

  • I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I can't send emails from Mail. I have three different accounts set up and have the same problem with all. The mail just sits in my outbox. All worked fine until Yosemite upgrade. Recent update has not fixed problem.

    I have been experiencing the same problem. My mail app won't even open on my Late 2011 Macbook Pro. It will show as open, but the app will never actually show up.

Maybe you are looking for