INBOUND_BINDING_ERROR in SXMB_MONI

Hi Experts,
we are using JMS to IDoc scenario.
The interface is running in the production perfectly every day and we have upgraded the patch level and there are many messages are recievd in XI and failed with the below error
<Code area="SECURITY">INBOUND_BINDING_ERROR</code>
<Stack>Error in sender agreement for party, service <servicename>,interface namespace http://abc.com/xi/sdm,interface <receiver interfacename> no sender agreement found for,,,,,</stack>
these messages are came into the system at the time of reastart or some time, after completing the upgrade XI received many of the messages and successfully processed, but the messages which is in the failure status are still showing the same error even if we restart the messages it is showing the same error.
Can anybody suggest how can we reprocess all the failed messages in system.
Thanks in Advance.
Neeru

Hi,
you can only reprocess it if the sender agreement will be correct
1. my suggestion would be to remove the sender agreement and recreate it
2. then test it with the test ID configuration test in the Integration Directory
3. then test the flow
if this will not work then you need to check letter by letter the data in the error
here for example you have "," instead of the "." in the namespace:
>>>http://abc.com/xi/sdm,interface
check if those are correct too
Regards,
Michal Krawczyk

Similar Messages

INBOUND_BINDING_ERROR in File Sender Adapter scenario

Hello,
In my file scenario file is picked up by Adapter Engine but I am not able to see in
SXMB_MONI. When i checked in message monitoring it is giving
"com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:"
Pls suggest.
Regards

have a look @ this thread...
File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Re: sxmb_moni says "no messages"
Re: File picked but not find in Integration Server sxmb_moni

Sxmb_moni says "no messages"

Hi all,
I have done a file to RFC scenario in PI 7.0 sp12. The file sender picks the file from the FTP server but it is not updating the Table in R/3. In communication monitoring it gives a success message but in sxmb_moni it says thr r no messages to be displayed..
PLZ help..very urgent
Regards
Arun

The audit log says error as follows
2007-07-16 12:59:45 Error SAPEngine_Application_Thread[impl:3]_53 1184570985862 Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party , service BS_Timeevent, interface namespace http://hrinterface, interface HR_MI No sender agreement found for , , , , ,
2007-07-16 12:59:45 Error SAPEngine_Application_Thread[impl:3]_53 1184570985862 Transmitting the message to endpoint http://mbixidev:8021/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:.

I can not find the messages in sxmb_moni in http to rfc scenarion

hi i'm using http client tool when i send the message its working fine i'm getting the response, but i can not find that message in sxmb_moni in http to rfc scenario
can anyone help me

Hi lnaki vila
I'm using pi 7.0 version
i can see the other scenarios like SOAP to RFC, SOAP to IDOC,FILEto IDOC
in sender side i'm not using any communication channel and adapter engine i'm just using http client tool for testing purpose
i'm getting the response that's fine because its a synchronous communication
i checked sxmb_adm in that -->integration configuration LOGGING parameter of category RUNTIME is set to ENGINE_TYPE and current value is HUB(Integration server)
thanks in advance
regards
Satish

Can not see messages in SXMB_MONI of ECC

Hi Friends,
             Here I am facing some problem with SXMB_MONI of ECC. I am doing an XI upgrade from XI3.0 to PI 7.1.
when I am doing my interface upgrade I am unable to see messages in SXMB_MONI of ECC. As ECC is also got upgraded now BASIS is very confused about configuration.
             when I went through some blogs I came across some suggestions like configuration in SXMB_ADM. In ECC the integration engine configuration what I did is
               Role of Business System         : Application System.
               Corresponding Integ. Server    : dest://<HTTP DEST>
              One of my doubts:: Is <HTTP DEST> is the one which we are giving in XI/PI or the new one created for ECC. First BASIS set up <HTTP DEST> as the same one which was configured in PI. Then I went back to BASIS and tell them that ECC is having its own local Integration Engine, so we need to create <HTTP DEST> which connects to integration engine of ECC.
               Then they created one <HTTP DEST> for ECC. but when I am doing connection test, Http response is coming as 400 BAD HTTP Response :: protocol error. I have no idea why it is behaving like that.
               After when I go through some more blogs they are dealing with RFC destinations LCRSAPRFC and SAPSLDAPI. when I check it in ECC I didn't found RFC destination LCRSAPRFC but SAPSLDAPI is existing in ECC.
               more over some blogs deal with the configuration in Transaction SLDAPICUST. when I check it in ECC no configuration was done in SLDAPICUST.
               I already configured ENGINE_TYPE, IS_URL, LOGGING, LOGGING_PROPAGATION, LOGGING_SYNC under specific configuration data of SXMB_ADM of ECC.
               Please let me know what needs to be done and let me out of this confusion. As I am a PI developer I am unaware of all these configurations. expecting replies from gurus....
Regards,
DASARI

Hi Friends,
             Looking at some more blogs I got a doubt.
            Actually my scenario is File - XI - RFC.
            Now my doubt is whether we can see the messages which were going to ECC by RFC adapter ?
            Looking at a thread I got confused whether SXMB_MONI can capture messages only if they are coming from Proxy or IDOC . please clarify me.
Regards,
Dasari.

PI 7.11 - How to create a System Error in SXMB_MONI using a Java Mapping

Hi
We ve go a Java Mapping in a File-to-HTTP Scenario. It works perfect except of one error case: if an empty source file or a source file with the wrong structure is delivered. In this case our Java Mapping forwards an empty payload to the HTTP channel. So, for PI is the mapping successful.
I'd like to recognize this case and invoke a system error in the SXMB_MONI, so that this mapping will be stopped and our alerting concept informs the users. I know, how to recognize the case in Java but need to know how to create the System Error Status in the PI System.
Thanks in advance
Michael

Hi Michael,
Please refer here for the mapping API description:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/package-summary.html
You can use the StreamTransformationException exception describet there to raise an error from your Java mapping. Direct link:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/StreamTransformationException.html
You might also consider using the "Empty-File Handling" option in sender file CC to avoid processing empty files by PI.
Hope this helps,
Greg

Unable to see pipe line steps in the SXMB_MONI

HI,
i have done the development and quality work for my p i7.1
i was testing the messages in the Quality System.
So i went to SXMB_MONI to see the messages.
After double clicking on the successfully processed message, it shows
pipe line steps.
in that I am able to see
1.inbound message(CENTRAL)
2.XML Validation inbound channel Request
3. call adapter
4. Response
but i am unable to see
1. Receiver Determination
2. Interface Determination
3. Receiver Grouping
4. Request Message Mapping
5. Technical Routing
whereas in the develoment system i am able to see the above all.
is there any configuration i have to do in the SXMB_ADM?

can i know that Configuration objects were created/ imported by using transport mechanisum?
if created ,
check the cache status and re activated those objects whatever u r posted in thread.
if transported :
u ll follow ,whatever posted by Earlier

What is Difference between SXMB_MONI and SXMB_MONITOR?

what is Difference between SXMB_MONI and SXMB_MONITOR?
Can any explain to this question.please?

Hello,
Both are same.
SXMB_MONI is area menu which will contain all multiple transactions pertaining to monitoring.
SXMB_MONI contains some functions viz monitoring for Bridging, Archived Msgs, Job overview, persistence layer analysis.
SXI_monitor directly leads to the message monitoring for the IS, which is part of the SXMB_MONI.
SXI_MONITOR directly executes the monitoring report.
Thanks,
Satya

Message in sxmb_moni is getting cancelled in 3 mins

Hi Experts,
Few messages for synchronous interfaces are going in to error status in sxmb_moni after 3 minutes even when a timeout parameter of 5mins is maintained in the module tabe of receiver SOAP adapter. Sender is ECC system. Please help resolve the issue.
Thanks and Regards,
Krish

Hello Krish,
Can you check if you can implement the note #1899735 - XI runtime: Trace of HTTP timeouts. This then writes which configuration parameter determines the timeout within the trace of the message in SXMB_MONI.
Regards
Eoin Kierans

How to delete the messages from SXMB_MONI which are already cancelled .

Hi All,
The messages were earlier in System error(Red flag) state so i cancelled it manually.
I want to know how to delete the messages from sxmb_moni which are already cancelled manually using ctrl+f8.
if not possible , then i want to see them in earlier state i.e.., in System error(Red flag).
can any tell me the procedure of doing it.
thanks
Sai.

Hi AmitSri,
Thanks for u r reply,
What is retention period, where can i find this option.
And i don't have authorizations to sxmb_adm --> configure delete procedure
--> Define interfaces for archiving and retention period.
and to RSXMB_DELETE_MESSAGES in se38 , i don't have authorizations to run
Is there any way to delete the messages or make them to System error( Red flag) which are manually cancelled.
Thanks
Sai.
Edited by: sai_SHA on Aug 17, 2011 12:29 AM

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

Unable to view the messages in sxmb_moni - Quality System

Hi,
We have got a strange problem in the diaplay view for TCode - sxmb_moni for our Quality system.
We have different scenarios - Idoc to Web Service (synchronous using BPM), Proxy to Web Service both inbound and outbound etc all to the same Webservice.
Whenever a scenario executes in the Development system, we are able to view the WSDL data that is sent to the Web Service along with the response given by the Web Service in all the cases successfull or unsuccessful.
But if the scenario is executed in the Quality system there are a few different cases for the display view in sxmb_moni :
Case 1 ) Incase of IDoc to Webservice "Successfull " (ECC -> PI-> Webservice)Scenario we are able to see only the data that is sent to the Webservice. We are not able to view the WSDL sent to the Webservice and the Response received.
Case 2) Incase of IDoc to Webservice " Unsuccessfull / Error " (ECC -> PI-> Webservice) Scenario We are able to view all the data that is sent to the Webservice right from the Idoc to BPM, the WSDL, the response received.
Case 3) In case of Proxy scenarios both inbound and outbound "Successfull ", we are neither able to view the data that is sent to the Webservice or the response received from the Web Service.
Case 4 ) In case of Proxy scenarios both inbound and outbound "Unsuccessfull ", we are able to view only the error and not the data that is exchanged between both the systems.
The point to be noted is that in case of Successfull executions the data is well received at the Web Service end.
What could be possibly missing between the two systems Development and Quality due to which we are not able to view messages in the T-Code SXMB_MONI
Thanks a lot for all the inputs!

Hi Lalit,
In sxmb_ad transaction, go to configuration integration engine (edit) and set Trace Level = 3.
See that:
The specified item was not found.
Regards,
Carme.

How to clear outbound Queue in SXMB_MONI

HI Experts,
Unable to process the file in SXMB_MONI as a result the files are getting strucked with the QUEUE and now how to clear this queues for processsing the file...
and another i have configure the server with 611 client but while executing the client of the server is showing 001 and we didn't observe initially as it is working fine but when we observed now it is found
is this has an impact..
do we need to do any other certain configurations at the Server end..
regards,
Kishore

> There is no URL in SXMB_ADM, how to provide an url there, and even before we didn't get this problem as the files are successfully processsing for the past 3 months in PDN, and now we are getting this problem.
>
Hello,
I have understood your problem but you are not following the steps which we are mentioning here.
For your above problem you need to follow ONLY step no1 & 2 mentioned in the blog since steps are common for acitvating the proxy and thats way you are getting confused that why I am asking you to follow that blog.
In the blog step 1 will simply help you creat the RFC destination.
Step 2 will help you to use the above RFC destinaiton as an url.
In opionion if you resolve this problem first then it will be easier to solve your queue problem.
Please let me know if you need more help/clarification in this regard i will help you.
Regards,
Sarvesh

System Error in Message Monitoring while it shows checked flag in SXMB_MONI

Hia,
We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario).
(ECC -> PI -> Legacy CRM)
I have following queries:
1. While sending messge across to Legacy system, we can see CHECKED flag in SXMB_MONI but there is System Error in Message Monitoring. When checked legacy system is unable to receive any message. Cannot understand the issue.
2. Is there any way to check in PI system whether the message has reached Legacy System other than making scneario synchronous?
Regards

System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous error:
2010-05-10 13:15:05     Information     Delivering to channel: CC_SOAP_SOReject_Out
2010-05-10 13:15:05     Information     SOAP: request message entering the adapter with user J2EE_GUEST
2010-05-10 13:15:05     Information     SOAP: completed the processing
2010-05-10 13:15:05     Information     SOAP: continuing to response message f33caa90-5c07-11df-c659-96d147c2ff0f
2010-05-10 13:15:05     Error     SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.
2010-05-10 13:15:05     Error     Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Server was unable to process request. ---> Object reference not set to an instance of an object.. Setting message to status failed.
2010-05-10 13:15:06     Error     The message status was set to FAIL.
I have already checked Data Structure and it is fine.
Regards
In this scenarios we are using XSLT mapping using CDATA.
Please suggest solution.

Error in SXMB_MONI

Hi,
I created a scenario in my XI development scenario.i tested it and it worked there correctly.but once i put all these scenarios into my XI production i get the following error in the transaction sxmb_moni
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="T">Party normalization: sender</Trace>
<Trace level="1" type="T">Sender scheme external =</Trace>
<Trace level="1" type="T">Sender agency external =</Trace>
<Trace level="1" type="T">Sender party external =</Trace>
<Trace level="1" type="T">Sender party normalized =</Trace>
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- 
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- 
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = XIP</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2005-10-12T10:39:28Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- 
<Trace level="1" type="T">Message-GUID = 4349D7D080A900FE00000000AC15012C</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="1" type="T">Queue name : XBTI0011</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0011</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- 
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="1" type="T">system-ID = XIP</Trace>
<Trace level="1" type="T">client = 200</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = XIAPPLUSER</Trace>
<Trace level="1" type="Timestamp">2005-10-12T10:39:28Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- 
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION" />
- 
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- 
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="1" type="T">No Relation found - accept given receivers.</Trace>
</Trace>
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Application-Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- 
</SAP:Trace>
Thanks and Regards,
Jishi

Hi Jishi
Not enough information in the trace.
Boost up ur trace level as Manish said, also check the entry for your pipeline url as well in your SLD for the business system you are using.
It should be something like this,
http://XIServer:8000/sap/xi/engine?type=entry
cheers
Sameer

INBOUND_BINDING_ERROR in SXMB_MONI

Similar Messages

Maybe you are looking for