INBOUND_BINDING_ERROR

HI all,
later a did a client copy from 001 to 200 am getting this error at sender CC, in my case JDBC.
2008-04-10 08:52:12     Success     The message status set to DLNG.
2008-04-10 08:52:14     Error     Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText:   ErrorStack: Error in sender agreement for party , service BS_ORAC_K, interface namespace urn:repsol.com:xi:orac:oraclebi, interface MI_oa_oraclebi No sender agreement found for , , , , ,
2008-04-10 08:52:14     Error     Transmitting the message to endpoint http://suarbulxd1d01:8001/sap/xi/engine?type=receiver using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:.
2008-04-10 08:52:14     Success     The message status set to WAIT.
as a saw in other similar threads, the SICF services were re-activated and the SAP_BASIS (tpz) was re-imported.
i dont have problem with CPA Cache and the connectivity with SLD works fine.
any suggest??
Thanks in advice
Rodrigo

Hi
check the following threads
File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Communciation Channel monitoring : missing adapter in XI 3.0
regards
krishna

Similar Messages

INBOUND_BINDING_ERROR in File Sender Adapter scenario

Hello,
In my file scenario file is picked up by Adapter Engine but I am not able to see in
SXMB_MONI. When i checked in message monitoring it is giving
"com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:"
Pls suggest.
Regards

have a look @ this thread...
File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Re: sxmb_moni says "no messages"
Re: File picked but not find in Integration Server sxmb_moni

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)

File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Hi all,
im having some troubles after the installation of SP19 (from SP16 in NW04) with File Adapter (File->Idoc scenario).
In message monitoring (Adapter Engine), I have several messages with status "System Error". The error text is :
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR
ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace 'http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
Im sure that the Integration Directory settings have not been changed. So I tried the following, but the problem persists:
- Deactivation/Activation of File Adapter channel
- check that user XIISUSER is not locked
- checked SXI_CACHE (it seems ok)
- Many CPA full refresh
- Dummy modifications of File Adapter channels (a dummy modification of the description)
- Reboot J2EE
I've seen that someone else had problems after upgrading to SP19. I'd really appreciate any suggestion of how to solve my issue.
Thank you
Manuel

Hi Prabhu,
I've already tried to restart server, but nothing happened. (Before update to SP19, the interface worked well).
This is the error log from message monitoring:
 2007-01-16 16:37:34 Success Channel cc_File_Snd_Bolle: Entire file content converted to XML format
2007-01-16 16:37:34 Success Send binary file "BOLLE_20061229142059.CSV" from FTP server "AS810T:/sapinbound", size 8733 bytes with QoS EOIO
2007-01-16 16:37:34 Success Application attempting to send an XI message asynchronously using connection AFW.
2007-01-16 16:37:34 Success Trying to put the message into the send queue.
2007-01-16 16:37:35 Success Message successfully put into the queue.
2007-01-16 16:37:35 Success The application sent the message asynchronously using connection AFW. Returning to application.
2007-01-16 16:37:35 Success The message was successfully retrieved from the send queue.
2007-01-16 16:37:35 Success File "BOLLE_20061229142059.CSV" successfully archived on FTP server "AS810T" as "/sapinbound/bolle/20070116-163735-245_BOLLE_20061229142059.CSV"
2007-01-16 16:37:35 Success The message status set to DLNG.
2007-01-16 16:37:35 Error Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party '', service 'LEGACY_DEV', interface namespace http://XXXXX.com/XXXXXX', interface 'INTERFACE_OB' No sender agreement found for , , , , ,
2007-01-16 16:37:35 Error Transmitting the message to endpoint http://SERVERNAME:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:. 
2007-01-16 16:37:35 Success The asynchronous message was successfully scheduled to be delivered at Tue Jan 16 16:42:35 CET 2007.
2007-01-16 16:37:35 Success The message status set to WAIT.
2007-01-16 16:42:35 Success Retrying to send message. Retry: 1
After this, the system try to resend the message, and the same error appears several times.
Ty,
Manuel

INBOUND_BINDING_ERROR in SXMB_MONI

Hi Experts,
we are using JMS to IDoc scenario.
The interface is running in the production perfectly every day and we have upgraded the patch level and there are many messages are recievd in XI and failed with the below error
<Code area="SECURITY">INBOUND_BINDING_ERROR</code>
<Stack>Error in sender agreement for party, service <servicename>,interface namespace http://abc.com/xi/sdm,interface <receiver interfacename> no sender agreement found for,,,,,</stack>
these messages are came into the system at the time of reastart or some time, after completing the upgrade XI received many of the messages and successfully processed, but the messages which is in the failure status are still showing the same error even if we restart the messages it is showing the same error.
Can anybody suggest how can we reprocess all the failed messages in system.
Thanks in Advance.
Neeru

Hi,
you can only reprocess it if the sender agreement will be correct
1. my suggestion would be to remove the sender agreement and recreate it
2. then test it with the test ID configuration test in the Integration Directory
3. then test the flow
if this will not work then you need to check letter by letter the data in the error
here for example you have "," instead of the "." in the namespace:
>>>http://abc.com/xi/sdm,interface
check if those are correct too
Regards,
Michal Krawczyk

SOAPFault received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR

Hi Experts,
we are testing file to RFC scenario. file adapter picked the file but not moving to Integration engine.we are getting below error someone can help us to resolve the issue. already we tested same one in development there it was works fine. but we are facing this problem in Quality.
we have done below checks also..
1. cache refresh (ESR, ID, Delta and full cache)
2.tested configurations in ID its working fine.
3. checked SXMB_ADM and and pipeline url and business systems in SLD. everything is fine.
4. when i checked in messaging system there i find something error like.
Transmitting the message to endpoint http://...sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during Sender Agreement Determination
SOAPFault received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BC_xxxx, http://xxx//xxxx,; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BC_xxxx, interface namespace http://xxx//xx, interface xxxx
No sender agreement found for , , , ,
can someone help us....
Regards,
vengal.

Hi Vengal,
The error is only in one FTP scenario or all FTP scenario? Please check the below discussion
SOAPFault received from Integration Server. ErrorCode/Category: XIServer/IN
regards,
Harish

Error RWB: Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR

hello,
i've a interface RFC to JDBC,
in RWB only one message 'Adapter Engine' with the follow error:
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party , service bs_rfc_int, interface namespace urn:sap-com:document:sap:rfc:functions, interface Z_SDC No sender agreement found for , , , , ,
The sender agreement exist, ii had changed (can activate) and activate the sender agreement, refresh caché,..however the error continue...
It's occurs in production, after transporting..
thank very much

Hi Silvia,
Please perform full CPACache refresh using below URL
http://<host name>:<http port>/CPACache/refresh?mode=full
Also, have a look on SLD config....ECC properly pointing to PI or not..
Regds,
Pinangshuk.

ERROR in PI : No sender agreement found for , , , , ,

Hello everybody,
i'm working with SAP PI 7.1
it's a new installation.
I created the first easy interface JDBC-Pi-File.
when i activate the CC i don't see any message in SXMB_MONI but in RWM i see the messages in Waiting status and when i look inside i see the follow error:
SOAPFAULT received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BS_CSIS_DEV, http://xxxx.com/test, SI_DB2SP_DOCUMENTS_AA_02; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BS_CSIS_DEV, interface namespace http://xxx.com/test interface SI_DB2SP_DOCUMENTS_AA_02 No sender agreement found for , , , , ,
1-Configuration is ok. I create all steps and sender Agreement exist
2-end point http://yyyyy:50100/sap/xi/engine?type=entry is correct and the same in SLD and sxmb_adm -> Integration Engine Configuration
3-i suppose 50100 port is correct because when i try to use 8010 port i have a different error.
4- i alreadi used CPA cache refresh and SXI_CACHE.
Any suggestion?
thanks

after 20 minuts i retry.
Now the error message is changed:
Transmitting the message to endpoint http://yyyyyy:8010/sap/xi/engine?type=entry using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection refused.
Edited by: apederiva on Aug 25, 2010 11:35 AM

Bad adapter engine configuration - File Sender scenery doesn't work

In file sender scenery, the adapter doesnu2019t pass any message to the Integration Engine.
When I take a look to the communication channel monitoring it shows the channel with status OK (Green). But when I look into the audit log of the incoming message I see the following error:
Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party , service VLTEST, interface namespace urn:damm.es:vialactea:logistica, interface oa_SimpleLine No sender agreement found for , , , , ,
The sender agreement exists in the Directory and the status of the cache is OK.
But in the Message Data I see this End Point URL: http://asrmd:8082/sap/xi/engine/?type=entry
This is adapter is attached to a development system instance number 80 and the port of the above URL is a reference to the TEST system instance number 82. I investigate this issue but I canu2019t find where the miss-configuration is causing this bad End Point.
Have anybody an idea about this problem. Itu2019s the first time I found this kind of miss-configuration.
All other adapters are working fine. The file receiver adapter is working fine too.
Thanks in advanced.

Hi Sergi,
Now is clear. Sorry but I didn´t see your posts properly. I didn't move the cross bar until the final.
So now I change my point of view.
Go to Runtime Workbech --> Component Monitoring --> Integration Engine --> Test Message. Which URL is displayed here? is it right?
If don't, effectively you have wrong configured your URL of the Integration Engine.
Go to SLD --> Business Systems --> Select your XI business System. At the Integration Configuration tag check the URL, if it is wrong, change it and save the changes. Remember that the rol must be Integration Server.
Refresh the caches.
Hope it is usefull.
Carlos

File Sender CC Error ?

Hi Experts
I got error for file to file senario , at sender communication channel monitoring. adapters are green but when i check detialed monitoring i saw this error . can any body help me .
First Error
SOAPFault received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BS_FileSenderServer, http://nsfiletofile, OB_FiletoFile; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BS_FileSenderServer, interface namespace http://nsfiletofile interface OB_FiletoFile No sender agreement found for
Second Error
Transmitting the message to endpoint http://SAPxxxx:80000/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during Sender Agreement Determination.\
Status is showing green and shotlog showing fucnctioning
Edited by: praveen.tecnics on Apr 15, 2009 11:46 PM

Hi!
It may sound stupid or even mad. But a few days ago I had a similar problem with a SOAP inbound adapter scenario in a PI 7.1 system. What did I do to solve this issue?
I deleted all objects in the ID
I activated the deletions
Then I started from scratch using the configuration Wizard
... and then ... suddenly it worked.
By the way: Obvioisly there is a big difference between Party '*' and Party ' ' ...
Regards,
Volker

SOAP Sender Adapter

i work with some sender SOAP adapter in my xi project.
After installing SP19 all Communication channell gets error when i send message:
the error (in adapter monitoring) is following :
2006-12-15 15:29:01 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: INBOUND_BINDING_ERROR:
2006-12-15 15:29:01 Error SOAP: call failed: com.sap.aii.af.ra.ms.api.DeliveryException: INBOUND_BINDING_ERROR:
2006-12-15 15:29:01 Error SOAP: call failed: com.sap.aii.af.ra.ms.api.DeliveryException: INBOUND_BINDING_ERROR:
Any suggestion?
Alessandro p.
Message was edited by:
Alessandro Pederiva

Hi,
1) Check out the XI pipeline url in the SLD>Business System><your integration server> and it should be http://<XI server>:8xxx/sap/xi/engine/?type=entry
Here port should be http port.
2) Also make sure that, all the Sender Agreement, Receiver Agreement are active.. otherwise change it and activate
3) Check put that XIISUSER is not locked ...
4) Refresh the cache- Go to XI homepage(Intgertaion Builder)>Administration>Cache Overview and refresh the all caches.. Also do the CPACache Refresh..
5) Restrating the Adapter engine from the visual admin may help u.
Hope this helps,
Regards,
Moorthy

SOAPFault received from Integration Server. ErrorCode/Category: XIServer/IN

Hello All,
I work on PI 7.1 and needed to create an interface using a simple File-to-File scenario. I created this without using any IR/ESR Objects as per a technical article on the website saptechnical dot com /Tutorials/XI/File2File/Demo1.htm
This worked perfectly fine in my dev environment. However, when I moved it to Test environment, I am having issues. Error message shown in RWB for Adapter engine is
SOAPFault received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BS_ECC100, http://abc, ecc-to-external; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BS_ECC100, interface namespace http://abc interface ecc-to-external No sender agreement found for , , , , ,
Error Transmitting the message to endpoint http://piq.uk.rweutil.net/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Received HTTP response code 500 : Error during Sender Agreement Determination.
I checked the Sender agreement. It seems fine. All other components are also active, however I do not see the sender agreement in SXI_CACHE transaction. Any clues what could be wrong ?
Many thanks in advance .
Regards
Rajiv

Hi Rajiv,
Please perform below tasks
1. Logon Integration Directory
2. Click on 'Modification' icon, put a 'dummy' change (may a space) in the description field
3. Save the change
4. Active the changed objects
5. Repeat 2, 3, 4 steps for all those objects you moved to Test environment.
All the above steps, eventually leads to have forceble cache refresh, if this won't helps resolve, Please perform full CPACache refresh using below URl
http://<host name>:<http port>/CPACache/refresh?mode=full
I presume these instructions will help to resolve the issue.
Regards
Sekhar

No message in runtime work bench and message monitoring

hi all,
we have done one simple file to file scenario.file is not being picked up.
there is no message in sxmb_moni and runtime workbench.
In communication channel monitoring also we r not getting any adapter.
(XI installed recently).
Is there any problem with installation?
Please let me know.
Thanks,
sreedhar.

Hi,
Please check if your Adapter Engine is working fine
Please can you look at this thread. The same issue is resolved here
Unable to find an associated SLD element
Also see if your SLDCHECK is fine?
No Adpater Engine available in Communication Channel creation
File adapter error after updating to SP19 (INBOUND_BINDING_ERROR)
Also check as per below steps
0) Go to RWB-->Cache Connectivity Test and check the status.. and run the refresh over there
1) execute SLDCHECK in XI box
2) Go to SXI_CACHE and refresh the cache also delete the Adapter metadata
3) Check the SAP BASIS SWCV is imported into IntegratioN Repository
4) Refersh the Adapter Metadata cache in SLD>Adminisration>Cache Overview ->Adapter Metadata Cache Refresh
this doc may help u :https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39fe8fa0446
thanks
Swarup

Sxmb_moni says "no messages"

Hi all,
I have done a file to RFC scenario in PI 7.0 sp12. The file sender picks the file from the FTP server but it is not updating the Table in R/3. In communication monitoring it gives a success message but in sxmb_moni it says thr r no messages to be displayed..
PLZ help..very urgent
Regards
Arun

The audit log says error as follows
2007-07-16 12:59:45 Error SAPEngine_Application_Thread[impl:3]_53 1184570985862 Received XI System Error. ErrorCode: INBOUND_BINDING_ERROR ErrorText: ErrorStack: Error in sender agreement for party , service BS_Timeevent, interface namespace http://hrinterface, interface HR_MI No sender agreement found for , , , , ,
2007-07-16 12:59:45 Error SAPEngine_Application_Thread[impl:3]_53 1184570985862 Transmitting the message to endpoint http://mbixidev:8021/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: INBOUND_BINDING_ERROR:.

INBOUND_BINDING_ERROR

Similar Messages

Maybe you are looking for