Inbound calls getting answered automatically in Cisco CME
Hi All....
Please advise me the reason, why the inbound calls to CME got answered automatically.?
I am mentioning the call handling scenario here with..
Trunk Type : FXO
Connection PLAR to physical extension(200)
timeouts call-disconnect 1
timeouts wait-release 1
voice-port 0/0/0
trunk-group FXO
cptone AE
timeouts call-disconnect 1
timeouts wait-release 1
connection plar 200
caller-id enable
More over I tried with the below configuration also!!!!!!!!!!!! Bad luck !!
voice class custom-cptone UAE-TONE
dualtone disconnect
frequency 400
cadence 400 350 225 525
voice-port 0/1/0
supervisory disconnect dualtone mid-call
supervisory custom-cptone UAE-TONE
timeouts call-disconnect 1
timeouts wait-release 1
dial-peer voice 202 pots
incoming called-number .
direct-inward-dial
The command connection plar 200 under voice port 0/0/0 directs the H323 gateway to automatically answer the inbound call on that FXO port and to attempt to transfer the call to DN 200.
If that is not what you want, then you need to remove the connection plar command and replace it with the command "secondary dialtone"
Similar Messages
-
Incoming calls are answered automatically
Hi all,
Please help with a following issue:
I have purchased a Curve 3G about a month ago.
Keep encountering the same problem: My phone calls are being auto answered without ringing (basically the phone connects the caller without any prompt from me). After taking a battery out and restarting, the blackberry works the way it is supposed to. After a while it switches to autoanswering calls. Can not be rebooting this silly phone all the time. I did check all the settings when it switches to autoanswering - Auto Answer Calls is on "Never" in General Options and I have changed all profiles to "Always play sound".
Is there a shortcut key I am pressing accidentally to connect automatically?
Or is it a software/hardware issue?That is the way the iPhone is supposed to function. The slide is what is used to answer the call. There is no other setting you can use to function in the manner you describe.
-
Cant join group call, gets kicked automatically.
Hey guys.
So just today, I was in a skype call, then we left to another call, but for some reason I couldnt join, they had added me, I was in the call but whenever I clicked the Join Call button, I got kicked almost straight away
I have tried...
Going to %appdata% and renaming Skype to Skype_old, this didnt work.
I tried deleting the DB file, this also didnt work.
Could someone please help me as I would love to skype in a group with some friends again.same thing happened and still is happening.
-
7920 Unable to answer with two inbound calls ringing
I have a CME customer reporting that when their 7920s have two inbound calls ringing at the same time they are unable to answer either call.
The 7920s are a shared extension, on Dual Line DNs, with their desktop phones.
CME is 4.0(2), and the 7920 phone load is 4.0-03-00.
Has anyone else experienced this problem, or have any idea what might cause it?
Thanks,
MikeWhat type of ap are you using? Controller or autonomous?
If controller is pre-4.0.217.0 version then would want to set the 802.1p tag for the platinum QoS profile to 7 vs 6 or upgrade to 4.0.217.0.
Also would advise to upgrade the 7920 to 03-02.
http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser-crypto
You may be hitting CSCsi02523?
Release notes @ http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/wip7920/relnotes/rn302.htm#wp98206. -
Login to cisco CME as Administrator failed check your call manager express
Hi Experts
CME and CUE in one router. when i access the CUE from the IE , i put the CUE username and password and i get in. After that it asks me to enter CME username and password to run the wizard. whenever i put the password i get this crappy message "Login to cisco CME as Administrator failed. check your call manager express config" i have cheked my config many times. Please let me know if someone has faced this problem or any suggestion on this. today is the 2nd time i have faced this problem , last time I cud not solve it and end up wasting 6 hours...
please helpHi friend,
Here is the Prerequisites for Installing Cisco Unity Express Software. As David describes, may be the CME admin account is missing:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel3_1/installation/guide/prereq31.html#wpmkr1112912
Try this, and let us know.
Best regards,
- Adrián. -
Configure Cisco CME auto-attendant to forward call after ext is dialed
I am trying to configure my CME if the auto attendant picks up and a users extension is dialed after hours to forward that call to the number configured for that extension, currently if the extension is dialed the call is not forwarded.
Thank you,
-TomHi,
I have same or similar issue, when a person call my company and press option 3 for example (after hour) the call get forward to a manager mobile number, my question is how can I disable the forwarding from CUCM? the OS i use is
8.6.2.22900-9
Many thanks -
Cisco CME and Calls through SIP provider
Hello, friends.
There are Cisco (C2801-ADVENTERPRISEK9_IVS-M), Version 15.1 (4) M7.
Telephones connected to SCCP, registered SIP from the provider.
When I try to call to test number 4444 through sip in debug I see:
*Feb 10 01:51:25.317: //53363/2739DFE79696/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 407 Proxy Authentication Required
Via: SIP/2.0/UDP XXXXXXXXXXX:5060;branch=z9hG4bK100D02077;rport=5060
From: "TEST" <sip:[email protected]>;tag=131CC60C-1D40
To: <sip:[email protected]>;tag=b638310eda6e4a73cf10b7fe3c94c572.bef7
Call-ID: [email protected]
CSeq: 101 INVITE
Proxy-Authenticate: Digest realm="sip.zadarma.com", nonce="Uvf1OFL39Awnou/oMiaFQrf9jyybhFmf", qop="auth"
Server: kamailio (4.0.3 (x86_64/linux))
Content-Length: 0
*Feb 10 01:51:25.325: //53363/2739DFE79696/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP XXXXXXXXXX:5060;branch=z9hG4bK100D02077
From: "TEST" <sip:[email protected]>;tag=131CC60C-1D40
To: <sip:[email protected]>;tag=b638310eda6e4a73cf10b7fe3c94c572.bef7
Date: Sun, 09 Feb 2014 21:51:25 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
Cisco при этом зарегана у провайдера SIP
DC#show sip-ua register status
Line peer expires(sec) registered P-Associ-URI
Configuration:
voice service voip
ip address trusted list
ipv4 178.16.26.122 255.255.255.255
ipv4 144.76.42.108 255.255.255.255
ipv4 176.9.145.115 255.255.255.255
ipv4 5.9.108.25 255.255.255.255
ipv4 78.46.95.118 255.255.255.255
ipv4 89.249.23.194 255.255.255.255
ipv4 178.16.26.124 255.255.255.255
ipv4 176.9.85.133 255.255.255.255
ipv4 46.4.53.86 255.255.255.255
ipv4 5.9.84.165 255.255.255.255
ipv4 78.16.26.122 255.255.255.255
ipv4 77.235.62.222 255.255.255.255
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
registrar server
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
codec preference 3 g711alaw
voice register global
max-dn 10
max-pool 10
voice register dn 1
number 150
voice register dn 2
number 151
voice translation-rule 9
rule 1 /^95/ //
voice translation-rule 1020
rule 1 /^.$/ /40232/
voice translation-profile outgoing
translate calling 1020
translate called 9
mgcp fax t38 ecm
mgcp profile default
dial-peer voice 2 voip
translation-profile outgoing outgoing
destination-pattern 95....
session protocol sipv2
session target sip-server
voice-class codec 1
no voice-class sip outbound-proxy
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay rtp-nte
no vad
sip-ua
credentials username 40232 password 7 XXXXXXXXXX realm sip.zadarma.com
authentication username 40232 password 7 XXXXXXXXXXXX realm sip.zadarma.com
registrar dns:sip.zadarma.com:5060 expires 3600
sip-server dns:sip.zadarma.com:5060
connection-reuse
host-registrar
DC#show sip-ua register status
Line peer expires(sec) registered P-Associ-URI
================================ ========== ============ ========== ============
150 40001 12 no
40232 -1 550 yes
SIP provider says cisco trying to call with the internal call number, and it is necessary in order that have an SIP provider:
Wrong Remote-Party-ID: "Vankuver" <sip:61@<my ip>>;party=calling;
Should be so sip:40232@<my ip>
Please help me!Yes, I behind nat.
*Feb 10 18:11:53.425: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/TCP 192.168.11.14:42294;branch=z9hG4bK-d8754z-e645887cf7416a27-1---d8754z-;rport
Max-Forwards: 70
Contact:
To: "954444"
From: "150";tag=7b409f06
Call-ID: ZjUzNjkwMWMyZDAyYmY1OWU2NjgzYzQwZjYyZWM5ZGU.
CSeq: 1 INVITE
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO
Content-Type: application/sdp
User-Agent: X-Lite release 1104o stamp 56125
Content-Length: 314
v=0
o=- 2 2 IN IP4 192.168.11.14
s=CounterPath X-Lite 3.0
c=IN IP4 192.168.11.14
t=0 0
m=audio 5724 RTP/AVP 107 0 8 101
a=alt:1 2 : gNONJ/Dj BaLJhmb/ 10.200.16.55 5724
a=alt:2 1 : DQ3e8qud c1qVrWui 192.168.11.14 5724
a=fmtp:101 0-15
a=rtpmap:107 BV32/16000
a=rtpmap:101 telephone-event/8000
a=sendrecv
*Feb 10 18:11:53.477: //54341/204C30429C0D/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK1038E7FF
From: "" >;tag=169E6BC4-1E16
To: [email protected]>
Date: Mon, 10 Feb 2014 14:11:53 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 0541864002-2442400227-2618163141-2285537806
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Timestamp: 1392041513
Contact: outside ip cisco cme:5060>
Expires: 180
Allow-Events: telephone-event
Max-Forwards: 69
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 262
v=0
o=CiscoSystemsSIP-GW-UserAgent 8076 2450 IN IP4 92.63.108.115
s=SIP Call
c=IN IP4 92.63.108.115
t=0 0
m=audio 18534 RTP/AVP 0 8 101
c=IN IP4 92.63.108.115
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
*Feb 10 18:11:53.481: //54340/204C30429C0D/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/TCP 192.168.11.14:42294;branch=z9hG4bK-d8754z-e645887cf7416a27-1---d8754z-;rport
From: "150";tag=7b409f06
To: "954444"
Date: Mon, 10 Feb 2014 14:11:53 GMT
Call-ID: ZjUzNjkwMWMyZDAyYmY1OWU2NjgzYzQwZjYyZWM5ZGU.
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
*Feb 10 18:11:53.625: //54341/204C30429C0D/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 407 Proxy Authentication Required
Via: SIP/2.0/UDP outside ip cisco cme:5060;branch=z9hG4bK1038E7FF;rport=5060
From: "" ;tag=169E6BC4-1E16
To: [email protected]>;tag=9fedfddccf3bcc4a1975d2cdb2a664b8.7066
Call-ID: [email protected]
CSeq: 101 INVITE
Proxy-Authenticate: Digest realm="sip.zadarma.com", nonce="Uvja/1L42dNbKQpCc2GzgagslkjyE1Pn", qop="auth"
Server: kamailio (4.0.3 (x86_64/linux))
Content-Length: 0
*Feb 10 18:11:53.633: //54341/204C30429C0D/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDPoutside ip cisco cme:5060;branch=z9hG4bK1038E7FF
From: "150" [email protected]>;tag=169E6BC4-1E16
To: [email protected]>;tag=9fedfddccf3bcc4a1975d2cdb2a664b8.7066
Date: Mon, 10 Feb 2014 14:11:53 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
*Feb 10 18:11:53.637: //54341/204C30429C0D/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDPoutside ip cisco cme:5060;branch=z9hG4bK1038F25FC
From: "" ;tag=169E6BC4-1E16
To: [email protected]>
Date: Mon, 10 Feb 2014 14:11:53 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 0541864002-2442400227-2618163141-2285537806
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Timestamp: 1392041513
Contact: :5060>
Expires: 180
Allow-Events: telephone-event
Proxy-Authorization: Digest username="40232",realm="sip.zadarma.com",uri="sip:[email protected]:5060",response="df38cd7f4af8e4a808fbbfdf5a7dd6a1",nonce="Uvja/1L42dNbKQpCc2GzgagslkjyE1Pn",cnonce="E701683F",qop=auth,algorithm=md5,nc=00000001
Max-Forwards: 69
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 262
v=0
o=CiscoSystemsSIP-GW-UserAgent 8076 2450 IN IP4 92.63.108.115
s=SIP Call
c=IN IP4 92.63.108.115
t=0 0
m=audio 18534 RTP/AVP 0 8 101
c=IN IP4 92.63.108.115
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
*Feb 10 18:11:53.981: //54341/204C30429C0D/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 100 trying -- your call is important to us
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK1038F25FC;rport=5060
From: "" ;tag=169E6BC4-1E16
To: [email protected]>
Call-ID: [email protected]
CSeq: 102 INVITE
Server: kamailio (4.0.3 (x86_64/linux))
Content-Length: 0
*Feb 10 18:11:54.385: //54341/204C30429C0D/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 92.63.X:5060;rport=5060;branch=z9hG4bK1038F25FC
Record-Route:
From: "k40232" ;tag=169E6BC4-1E16
To: [email protected]>;tag=as7e8de8e5
Call-ID: [email protected]
CSeq: 102 INVITE
Server: Zadarma Voip
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Contact:
Content-Type: application/sdp
Content-Length: 281
v=0
o=root 1942395501 1942395501 IN IP4 178.16.26.124
s=Asterisk PBX
c=IN IP4 178.16.26.124
t=0 0
m=audio 12164 RTP/AVP 8 0 101
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -
a=ptime:20
a=sendrecv
*Feb 10 18:11:54.409: //54341/204C30429C0D/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.xxxx.xxxx:5060;branch=z9hG4bK10390E63
From: "150" [email protected]>;tag=169E6BC4-1E16
To: [email protected]>;tag=as7e8de8e5
Date: Mon, 10 Feb 2014 14:11:53 GMT
Call-ID: [email protected]
Route:
Max-Forwards: 70
CSeq: 102 ACK
Proxy-Authorization: Digest username="40232",realm="sip.zadarma.com",uri="sip:[email protected]:5060",response="df38cd7f4af8e4a808fbbfdf5a7dd6a1",nonce="Uvja/1L42dNbKQpCc2GzgagslkjyE1Pn",cnonce="E701683F",qop=auth,algorithm=md5,nc=00000001
Allow-Events: telephone-event
Content-Length: 0
*Feb 10 18:11:54.429: //54340/204C30429C0D/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 200 OK
Via: SIP/2.0/TCP 192.168.11.14:42294;branch=z9hG4bK-d8754z-e645887cf7416a27-1---d8754z-;rport
From: "150";tag=7b409f06
To: "954444";tag=169E6F78-88E
Date: Mon, 10 Feb 2014 14:11:53 GMT
Call-ID: ZjUzNjkwMWMyZDAyYmY1OWU2NjgzYzQwZjYyZWM5ZGU.
CSeq: 1 INVITE
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
Allow-Events: telephone-event
Contact: :5060;transport=tcp>
Supported: replaces
Server: Cisco-SIPGateway/IOS-12.x
Supported: timer
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 193
v=0
o=CiscoSystemsSIP-GW-UserAgent 149 3396 IN IP4 92.63.108.115
s=SIP Call
c=IN IP4 92.63.108.115
t=0 0
m=audio 17190 RTP/AVP 8
c=IN IP4 92.63.108.115
a=rtpmap:8 PCMA/8000
a=ptime:20
*Feb 10 18:11:54.653: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060;transport=tcp SIP/2.0
Via: SIP/2.0/TCP 91.231.141.230:42294;branch=z9hG4bK-d8754z-95374017c126c928-1---d8754z-;rport
Max-Forwards: 70
Contact:
To: "954444";tag=169E6F78-88E
From: "150";tag=7b409f06
Call-ID: ZjUzNjkwMWMyZDAyYmY1OWU2NjgzYzQwZjYyZWM5ZGU.
CSeq: 1 ACK
User-Agent: X-Lite release 1104o stamp 56125
Content-Length: 0 -
Cisco CME: calls through SIP-provider again
Hello,friends!
I have already published a discussion here https://supportforums.cisco.com/discussion/12089656/cisco-cme-and-calls-through-sip-provider and you helped me, everything works well for Russian numbers.
When I tried to add the configuration for calls to Belarus, again, there was a problem. I do not understand why, although the configuration ideintichnaya.
My config:
voice service voip
ip address trusted list
ipv4 178.16.26.122 255.255.255.255
ipv4 144.76.42.108 255.255.255.255
ipv4 176.9.145.115 255.255.255.255
ipv4 5.9.108.25 255.255.255.255
ipv4 78.46.95.118 255.255.255.255
ipv4 89.249.23.194 255.255.255.255
ipv4 178.16.26.124 255.255.255.255
ipv4 176.9.85.133 255.255.255.255
ipv4 46.4.53.86 255.255.255.255
ipv4 5.9.84.165 255.255.255.255
ipv4 78.16.26.122 255.255.255.255
ipv4 77.235.62.222 255.255.255.255
ipv4 81.88.86.11 255.255.255.255
ipv4 192.168.1.50 255.255.255.255
ipv4 217.150.198.44 255.255.255.255
ipv4 178.63.96.3 255.255.255.255
ipv4 178.63.96.28 255.255.255.255
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
sip
registrar server
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
codec preference 3 g711alaw
voice class sip-profiles 20
request INVITE sip-header From modify "\"(.*)\" <sip:(.*)@(.*)>" "\"\" <sip:[email protected]>"
voice translation-rule 9
rule 1 /^98/ /7/
voice translation-rule 10
rule 1 /^9/ //
voice translation-rule 1020
rule 1 /^.*$/ /141756/
voice translation-rule 1030
rule 1 /^.*/ /141756/
voice translation-rule 1040
rule 1 /^.*$/ /21/
voice translation-profile incoming
translate called 1040
voice translation-profile outgoing
translate calling 1030
translate called 9
voice translation-profile outgoing-mezhdunarod
translate calling 1030
translate called 10
voice-card 0
dial-peer voice 2 voip
description TO-RUSSIA
translation-profile outgoing outgoing
preference 1
destination-pattern 98..........
session protocol sipv2
session target sip-server
voice-class codec 1
no voice-class sip outbound-proxy
voice-class sip profiles 20
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay rtp-nte sip-notify
no vad
dial-peer voice 3 voip
translation-profile incoming incoming
incoming called-number 141756
voice-class codec 1
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay rtp-nte
no vad
dial-peer voice 4 voip
description To-Belarus
translation-profile outgoing outgoing-mezhdunarod
destination-pattern 9375.........
session protocol sipv2
session target sip-server
voice-class codec 1
no voice-class sip outbound-proxy
voice-class sip profiles 20
voice-class sip bind control source-interface FastEthernet0/0
voice-class sip bind media source-interface FastEthernet0/0
dtmf-relay rtp-nte sip-notify
no vad
sip-ua
credentials username 141756 password 7<pass> realm sip.zadarma.com
authentication username 141756 password 7 <pass>
no remote-party-id
registrar 1 dns:sip.zadarma.com expires 3600
sip-server dns:sip.zadarma.com
connection-reuse
host-registrar
DEBUG ccsip message:
Jun 17 14:23:09.033: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK36571F65
From: "" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>
Date: Tue, 17 Jun 2014 09:23:09 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3536040247-4114026979-2924673736-0741251102
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 101 INVITE
Max-Forwards: 70
Timestamp: 1402996989
Contact: <sip:[email protected]:5060>
Call-Info: <sip:92.63.108.115:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 309
v=0
o=CiscoSystemsSIP-GW-UserAgent 6656 8059 IN IP4 92.63.108.115
s=SIP Call
c=IN IP4 92.63.108.115
t=0 0
m=audio 18252 RTP/AVP 0 18 8 101
c=IN IP4 92.63.108.115
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
Jun 17 14:23:09.089: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Received:
SIP/2.0 407 Proxy Authentication Required
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK36571F65;rport=5060
From: "" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>;tag=b638310eda6e4a73cf10b7fe3c94c572.6d40
Call-ID: [email protected]
CSeq: 101 INVITE
Proxy-Authenticate: Digest realm="sip.zadarma.com", nonce="U6AYAFOgFtT86kmu2Fr5tYxLYGEexIl1", qop="auth"
Server: kamailio (4.1.2 (x86_64/linux))
Content-Length: 0
Jun 17 14:23:09.169: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Sent:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK36571F65
From: "Vankuver" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>;tag=b638310eda6e4a73cf10b7fe3c94c572.6d40
Date: Tue, 17 Jun 2014 09:23:09 GMT
Call-ID: [email protected]
Max-Forwards: 70
CSeq: 101 ACK
Allow-Events: telephone-event
Content-Length: 0
Jun 17 14:23:09.169: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK365820F2
From: "" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>
Date: Tue, 17 Jun 2014 09:23:09 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3536040247-4114026979-2924673736-0741251102
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Max-Forwards: 70
Timestamp: 1402996989
Contact: <sip:[email protected]:5060>
Call-Info: <sip:92.63.108.115:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Proxy-Authorization: Digest username="141756",realm="sip.zadarma.com",uri="sip:[email protected]:5060",response="9534322838cbf2e265b2004bc0aa240e",nonce="U6AYAFOgFtT86kmu2Fr5tYxLYGEexIl1",cnonce="FFF9A231",qop=auth,algorithm=md5,nc=00000001
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 309
v=0
o=CiscoSystemsSIP-GW-UserAgent 6656 8059 IN IP4 92.63.108.115
s=SIP Call
c=IN IP4 92.63.108.115
t=0 0
m=audio 18252 RTP/AVP 0 18 8 101
c=IN IP4 92.63.108.115
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
Jun 17 14:23:09.637: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK365820F2
From: "" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>
Date: Tue, 17 Jun 2014 09:23:09 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3536040247-4114026979-2924673736-0741251102
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Max-Forwards: 70
Timestamp: 1402996989
Contact: <sip:[email protected]:5060>
Call-Info: <sip:92.63.108.115:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Proxy-Authorization: Digest username="141756",realm="sip.zadarma.com",uri="sip:[email protected]:5060",response="9534322838cbf2e265b2004bc0aa240e",nonce="U6AYAFOgFtT86kmu2Fr5tYxLYGEexIl1",cnonce="FFF9A231",qop=auth,algorithm=md5,nc=00000001
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 309
v=0
o=CiscoSystemsSIP-GW-UserAgent 6656 8059 IN IP4 92.63.108.115
s=SIP Call
c=IN IP4 92.63.108.115
t=0 0
m=audio 18252 RTP/AVP 0 18 8 101
c=IN IP4 92.63.108.115
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
Jun 17 14:23:10.621: //14293/D2C3B137AE52/SIP/Msg/ccsipDisplayMsg:
Sent:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 92.63.108.115:5060;branch=z9hG4bK365820F2
From: "" <sip:[email protected]>;tag=40FCB218-23D7
To: <sip:[email protected]>
Date: Tue, 17 Jun 2014 09:23:10 GMT
Call-ID: [email protected]
Supported: 100rel,timer,resource-priority,replaces,sdp-anat
Min-SE: 1800
Cisco-Guid: 3536040247-4114026979-2924673736-0741251102
User-Agent: Cisco-SIPGateway/IOS-12.x
Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, SUBSCRIBE, NOTIFY, INFO, REGISTER
CSeq: 102 INVITE
Max-Forwards: 70
Timestamp: 1402996990
Contact: <sip:[email protected]:5060>
Call-Info: <sip:92.63.108.115:5060>;method="NOTIFY;Event=telephone-event;Duration=2000"
Expires: 180
Allow-Events: telephone-event
Proxy-Authorization: Digest username="141756",realm="sip.zadarma.com",uri="sip:[email protected]:5060",response="9534322838cbf2e265b2004bc0aa240e",nonce="U6AYAFOgFtT86kmu2Fr5tYxLYGEexIl1",cnonce="FFF9A
All possible debugging has been turned off
DC#231",qop=auth,algorithm=md5,nc=00000001
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 309
v=0
o=CiscoSystemsSIP-GW-UserAgent 6656 8059 IN IP4 92.63.108.115
s=SIP Call
c=IN IP4 92.63.108.115
t=0 0
m=audio 18252 RTP/AVP 0 18 8 101
c=IN IP4 92.63.108.115
a=rtpmap:0 PCMU/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
Debug voice ccapi inout:
Destination Pattern=9375........., Called Number=375298911396, Digit Strip=FALSE
Jun 17 15:22:13.073: //14425/13366763AF35/CCAPI/ccCallSetupRequest:
Calling Number=141756(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=375298911396(TON=Unknown, NPI=Unknown),
Redirect Number=, Display Info=Vankuver
Account Number=, Final Destination Flag=FALSE,
Guid=13366763-F540-11E3-AF35-FAC82C2E981E, Outgoing Dial-peer=4
Jun 17 15:22:13.073: //14425/13366763AF35/CCAPI/cc_api_display_ie_subfields:
ccCallSetupRequest:
cisco-username=
----- ccCallInfo IE subfields -----
cisco-ani=141756
cisco-anitype=0
cisco-aniplan=0
cisco-anipi=0
cisco-anisi=0
dest=375298911396
cisco-desttype=0
cisco-destplan=0
cisco-rdie=FFFFFFFF
cisco-rdn=
cisco-rdntype=0
cisco-rdnplan=0
cisco-rdnpi=0
cisco-rdnsi=0
cisco-redirectreason=0 fwd_final_type =0
final_redirectNumber =
hunt_group_timeout =0
Jun 17 15:22:13.073: //14425/13366763AF35/CCAPI/ccIFCallSetupRequestPrivate:
Interface=0x6968AA04, Interface Type=3, Destination=, Mode=0x0,
Call Params(Calling Number=141756,(Calling Name=Vankuver)(TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed),
Called Number=375298911396(TON=Unknown, NPI=Unknown), Calling Translated=FALSE,
Subscriber Type Str=RegularLine, FinalDestinationFlag=FALSE, Outgoing Dial-peer=4, Call Count On=FALSE,
Source Trkgrp Route Label=, Target Trkgrp Route Label=, tg_label_flag=0, Application Call Id=)
Jun 17 15:22:13.073: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Jun 17 15:22:13.073: :cc_get_feature_vsa malloc success
Jun 17 15:22:13.073: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Jun 17 15:22:13.077: cc_get_feature_vsa count is 2
Jun 17 15:22:13.077: //-1/xxxxxxxxxxxx/CCAPI/cc_get_feature_vsa:
Jun 17 15:22:13.077: :FEATURE_VSA attributes are: feature_name:0,feature_time:1819298856,feature_id:3371
Jun 17 15:22:13.077: //14427/13366763AF35/CCAPI/ccIFCallSetupRequestPrivate:
SPI Call Setup Request Is Success; Interface Type=3, FlowMode=1
Jun 17 15:22:13.077: //14427/13366763AF35/CCAPI/ccCallSetContext:
Context=0x6C726BF4
Jun 17 15:22:13.077: //14425/13366763AF35/CCAPI/ccSaveDialpeerTag:
Outgoing Dial-peer=4
Jun 17 15:22:13.085: //14427/13366763AF35/CCAPI/cc_api_call_proceeding:
Please help me... I don't know what to do!You need to contact service provider for this , after authentication challenge your sip provider is not sending any response.
Contact them and ask whether they had received INVITE with proxy authentication details or not. -
E 72 Call logs getting deleted automatically
Hi,
I am using e72 since 1 month. My phone call logs gets deleted automatically as the day starts. I have set the call log duration to 30 days. My phone software version is 031.023 date31/03/2010. Please provide the solutionI'm in a huge problem... My E72 is set to log 30 days but it only logs 1000 entries which is not enough for me so my oldest entries get deleted after approximately 22-23 days...
Can anyone from Nokia confirm this? Is S60v3 log limited to 1000 entries? It happened before and it happens also with the newest 051.xxx firmware.
How to resolve this? Cut back on phone usage?! -
While making a call or answering a call the speaker automatically on
while making a call or answering a call the speaker is automatically on?can u suggest remidy
The iPhone is designed to have the screen go dark during a phone call, since the phone is normally up to your ear and you would not want to be touching the screen with your ear and possibly touching random buttons. This is done by the proximity sensor, which is located near the ear speaker on the phone. When you are reaching to turn on the speaker, it is possible that you are crossing this sensor light and it turns off the screen. I have done this before. If you try reaching from the bottom of the screen, does this still happen? Try to keep your hand away from the top front portion of the phone and see if that helps.
-
not able to make outgoing calls in iphone4. Regularly i face this problem, at the same time i receive incoming call, can do net surfing, can access email and sms, only outgoing calls get failed every time. please answer to solve this problem
Good day Sidharth Namrta,
It sounds like you are unable to make any calls, but you can recieve them, and everything else seems to work fine. I recommend you use the troubleshooting in the following article to help you get that resolved, named:
iPhone: Troubleshooting issues making or receiving calls
Follow the steps below to resolve this issue. Please test after each step.
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Check your phone settings:
Check your Do Not Disturb settings: Tap Settings > Do Not Disturb.
Check for any blocked phone numbers: Tap Settings > Phone > Blocked.
See if Call Forwarding is turned on: Tap Settings > Phone > Call Forwarding.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
HI.
I'm running CME on a 2851.
My issue is with inbound calls not failing totally, but then requiring the extension to be dialed. This only happens for calls where the calling number is unknown.
So all calls inbound work if the inbound calling number is known. Calls route nicely.
If the calling number is unknown the caller gets a tone, whereby they need to then dial the extension.
Ideally I'd like to have unknown calling numbers simply route the call the same way as with a known calling number.
FYI when i debug q931 caller id (if off) is shown as Calling Party Number i = 0x00A3, N/A
Appreciate any help as this is causing some problems!!!
Configuration attachedTimothy,
When the calls come in, a dial-peer match is made, and in this case, where the calling number is known, the dial-peer whose destination-pattern command matches the calling number is selected, and the call is routed.
For calls where the calling number is not available, there is no dial-peer matched, so the default dial-peer (dial-peer 0) is used, and two stage dialing is then required.
To resolve, a quick solution would be to create a new dial-peer that has the incoming called-number command (which matches on the called number), so that this dial-peer will always be used for all incoming calls regardless of whether the calling number is available or not.
Use the direct-inward-dial command as well in this dial-peer to force one stage dialing.
dial-peer voice 90 pots
incoming called-number .
direct-inward-dial
port 0/0/0:15.
See also
* http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#topic3
* http://www.cisco.com/en/US/tech/tk652/tk698/technologies_tech_note09186a00800e00d0.shtml
Hope this helps.
Regards,
Michael. -
Agents state getting changed automatically from NotReady to Ready
Agents state getting changed automatically from NotReady to Ready on random position during break time. Can some help me out?
UCCE version 8.5Hello Ahmad,
Bug below describes a scenario where the agent is transitioned to the Ready state without manually changing it.
Also effects 8.5.
CSCty97770
Save Bug
UCCX: Agent Incorrectly Set To Ready After RNA On ICD Extension
Symptom:
A Unified Contact Center Express (UCCX) agent may transition to the Ready state without manual intervention.
Conditions:
This occurs when, while on a call on the personal line, the agent receives a consult transfer from another agent on the ICD line, does not answer this call and the call is disconnected by the calling agent. When processing this disconnect, the agent state is incorrectly transitioned to Ready even though the call is still in progress ...more
Details
Known Affected Releases: (2)
8.5(1)SU2 | 8.0(2)SU4
Known Fixed Releases: (1)
9.0(.96000.398)
Product: Cisco Unified Contact Center Express
Hope this helps,
Please rate helpful posts.
Thanks. -
Calls in queue drop when first call is answered
When all agents are busy and there are multiple calls in queue, at the point a call gets routed to an agent and answered from queue, the other calls in queue hear the disconnect prompt.
This is CME 9.1 on Version 15.0(1r)M16
application
service queue flash:app-b-acd-2.1.2.3.tcl
param queue-len 30
param aa-hunt1 7426701
param queue-manager-debugs 1
param number-of-hunt-grps 1
service KCC flash:app-b-acd-aa-2.1.2.3.tcl
paramspace english index 1
param handoff-string KCC
paramspace english language en
param call-retry-timer 15
param service-name queue
param drop-through-option 1
param second-greeting-time 60
paramspace english location flash:
param drop-through-prompt _TYFC.au
param send-account true
param max-time-vm-retry 3
param voice-mail 1426900
param max-time-call-retry 1400
param aa-pilot 7427701
param number-of-hunt-grps 1
Thanks in advance.
HHeTry this , see if that helps...
param queue-len number
Router(config-app-param)# param queue-len 15
Sets the maximum number of calls allowed in each ephone hunt group's call queue used by Cisco Unified CME B-ACD.
•number—Number of calls that can be waiting in the call queue for each ephone hunt group. The range is from 1 to 30. The default is 10. -
SIP Trunk not accepting inbound calls
I have a CME setup using Engin as a SIP provider
I am able to dial out with no issue, however my inbound calls do not work, they divert to the Engin voicemail
My SIP registration is OK and the number is configured as the primary DN on one of my phones
Router#sh sip-ua register status
Line peer expires(sec) registered P-Associ-URI
================================ ========== ============ ========== ============
038682XXXX -1 1124 yes
101 20001 45 no
102 20003 18 no
103 20005 45 no
104 20006 45 no
I do see the call come in if I debug the dial peer, but it only seems to match an outgoing dp
I am seeing a couple of disconnect cause codes that I cant seem to find any relavent information on in the CCSIP debugs
Router#
Sep 8 18:15:15.009: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_REQ
Sep 8 18:15:15.009: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: dir:2, method:102, resp_code:0, container:4F947560
Sep 8 18:15:15.009: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLPrintTDContainer: Peer-Event: E_STSL_PASS_ST_PARAMS, SE Value:1800, SE Refresher:uas, Min-SE Value:1800, flags:2001
Sep 8 18:15:15.017: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_RESP
Sep 8 18:15:15.017: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: dir:1, method:102, resp_code:100, container:4F947DF8
Sep 8 18:15:15.025: //-1/xxxxxxxxxxxx/SIP/Event/sipSPIEventInfo: Queued event from SIP SPI : SIPSPI_EV_CC_CALL_DISCONNECT
Sep 8 18:15:15.025: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: Event: E_STSL_SESSION_REFRESH_RESP
Sep 8 18:15:15.025: //156/83D9548A803F/SIP/Event/Session-Timer/sipSTSLMain: dir:1, method:102, resp_code:403, container:4F947B38
Sep 8 18:15:15.061: //156/83D9548A803F/SIP/Call/sipSPICallInfo:
The Call Setup Information is:
Call Control Block (CCB) : 0x4C39C570
State of The Call : STATE_DEAD
TCP Sockets Used : NO
Calling Number : 0417XXXXXX
Called Number : 038682XXXX
Source IP Address (Sig ): 211.30.48.136
Destn SIP Req Addr:Port : 203.161.164.69:5060
Destn SIP Resp Addr:Port : 203.161.164.69:5060
Destination Name : 203.161.164.69
Sep 8 18:15:15.061: //156/83D9548A803F/SIP/Call/sipSPIMediaCallInfo:
Number of Media Streams: 1
Media Stream : 1
Negotiated Codec : g711ulaw
Negotiated Codec Bytes : 160
Nego. Codec payload : 0 (tx), 0 (rx)
Negotiated Dtmf-relay : 0
Dtmf-relay Payload : 0 (tx), 0 (rx)
Source IP Address (Media): 211.30.48.136
Source IP Port (Media): 17768
Destn IP Address (Media): 203.161.164.69
Destn IP Port (Media): 18314
Orig Destn IP Address:Port (Media): [ - ]:0
Sep 8 18:15:15.061: //156/83D9548A803F/SIP/Call/sipSPICallInfo:
Disconnect Cause (CC) : 21
Disconnect Cause (SIP) : 403
Any Ideas
DougHi Tapan,
Firstly the topology is as follows
ISP/VOIP provider - Internet - Cable modem - 2800 CME router - IP Phone
The VM is provided by the ISP
debug ccsip messages
Sep 9 10:21:41.488: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
INVITE sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
CSeq: 633854439 INVITE
Contact:
Supported: 100rel,timer
Allow: ACK,BYE,CANCEL,INFO,INVITE,OPTIONS,PRACK,REFER,NOTIFY,UPDATE
Accept: multipart/mixed,application/media_control+xml,application/sdp
Min-SE: 60
Session-Expires: 1800;refresher=uas
Max-Forwards: 9
Content-Type: application/sdp
Content-Disposition: session;handling=required
Content-Length: 317
v=0
o=BroadWorks 18275729 1 IN IP4 203.161.164.69
s=-
c=IN IP4 203.161.164.69
t=0 0
m=audio 18128 RTP/AVP 18 8 0 101
c=IN IP4 203.161.164.69
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=yes
a=rtpmap:8 PCMA/8000
a=rtpmap:0 PCMU/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=bsoft: 1 image udptl t38
Sep 9 10:21:41.508: //4375/867C64EB8067/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>
Date: Fri, 09 Sep 2011 00:21:41 GMT
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
CSeq: 633854439 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
Sep 9 10:21:41.516: //4375/867C64EB8067/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 403 Forbidden
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>;tag=39373A4-586
Date: Fri, 09 Sep 2011 00:21:41 GMT
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
CSeq: 633854439 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=21
Content-Length: 0
Sep 9 10:21:41.544: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected]:5060 SIP/2.0
Via: SIP/2.0/UDP 203.161.164.69:5060;branch=z9hG4bKv0hlbo2030i1c85sm7b0.1
CSeq: 633854439 ACK
From: "0417XXXXXX"[email protected];user=phone>;tag=SD1uttd01-353510938-1315527701453-
To: "Doug Goding"[email protected]>;tag=39373A4-586
Call-ID: SD1uttd01-c27fdbf3f1de4ad1f0f2e1342b210494-au418e3
Max-Forwards: 9
Content-Length: 0
Voice Config
Router#
voice service voip
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
sip
registrar server expires max 3600 min 3600
localhost dns:mel.byo.engin.com.au
no call service stop
voice class codec 1
codec preference 1 g711ulaw
voice translation-rule 10
rule 1 /^0/ //
voice translation-rule 11
rule 1 /^.*/ /0386821234/
voice translation-profile PSTN_Outgoing
translate calling 11
voice-card 0
dsp services dspfarm
mgcp profile default
sccp local Vlan100
sccp ccm 10.1.100.1 identifier 1 version 7.0
sccp
sccp ccm group 1
bind interface Vlan100
associate ccm 1 priority 1
associate profile 1 register confdsp
dspfarm profile 1 conference
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 4
associate application SCCP
dial-peer voice 99 voip
translation-profile outgoing PSTN_Outgoing
destination-pattern .T
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 100 voip
session protocol sipv2
session target dns:mel.byo.engin.com.au
incoming called-number 0386821234
dtmf-relay sip-notify
codec g711ulaw
no vad
dial-peer voice 110 voip
description ** Incoming call from SIP trunk (Generic SIP Trunk Provider) **
session protocol sipv2
session target dns:mel.byo.engin.com.au
incoming called-number .%
dtmf-relay rtp-nte
no vad
dial-peer voice 90 voip
description Melbourne 03 Numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern [89].......
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 91 voip
description National Numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 0[278]........
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 92 voip
description Vic/Tas 03 numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern [56].......
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 93 voip
description Mobile numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 04........
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 94 voip
description 13XXXX numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 13[1-9]...
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 96 voip
description 1300/1800 numbers
translation-profile outgoing PSTN_Outgoing
destination-pattern 1[38]00......
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 98 voip
description Emergency 000
translation-profile outgoing PSTN_Outgoing
destination-pattern 000
session protocol sipv2
session target sip-server
dtmf-relay rtp-nte
codec g711ulaw
no vad
sip-ua
credentials username 0386821234 password 7 XXXX realm voice.mibroadband.com.au
authentication username 0386821234 password 7 XXXX
nat symmetric role active
nat symmetric check-media-src
no remote-party-id
retry invite 2
retry register 10
timers connect 100
mwi-server dns:mel.byo.engin.com.au expires 3600 port 5060 transport udp unsolicited
registrar dns:mel.byo.engin.com.au expires 3600
sip-server dns:mel.byo.engin.com.au
connection-reuse
telephony-service
sdspfarm conference mute-on #1 mute-off #2
sdspfarm units 2
sdspfarm tag 1 confdsp
conference hardware
max-ephones 42
max-dn 144
ip source-address 10.1.100.1 port 2000
calling-number initiator
service phone videoCapability 1
service phone displayOnDuration 00:01
service phone displayOnTime 08:30
service phone displayOffTime 17:30
service phone displayIdleTimeout 00:01
service phone displayOnWhenIncomingCall 1
system message Cisco CME
load 7941 SCCP41.8-4-2S
load 7942 SCCP42.8-4-2S
load 7945 SCCP45.8-4-2S
load 7961 SCCP41.8-4-2S
load 7962 SCCP42.8-4-2S
load 7965 SCCP45.8-4-2S
load ata ATA030204SCCP090202A
time-zone 48
date-format dd-mm-yy
voicemail 90125200
mwi relay
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh music-on-hold.au
web admin system name cisco secret 5 $1$d8/H$glhLiCCWXmFSUp6BtwGho0
dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern 0.T
create cnf-files version-stamp 7960 Jul 06 2011 10:32:45
ephone-dn 1 dual-line
number 038682XXXX
label 101
name 7965
mwi sip
ephone-dn 2 dual-line
number 102
label 102
name 7941
ephone-dn 3 dual-line
number 103
label 103
name 7920
ephone 1
device-security-mode none
video
mac-address 0023.5EB8.6E4E
type 7965
button 1:2 2:1
ephone 3
device-security-mode none
mac-address 0019.0633.A933
max-calls-per-button 2
type 7920
button 1:3
ephone 10
device-security-mode none
mac-address 0019.E7B7.BAB3
max-calls-per-button 2
type ata
button 1:1
Maybe you are looking for
-
Traveling to the Philippines soon. How to use my iPhone ther?
I have a iPhone and an iPad. I plan on visiting the Philippines next year. Do I need a different charger than I have now, or will e chargers for both work there, without any difficulties? . Also, I have AT&T. Should I bury a SIM card there or us
-
Is there any field on waste packaging information in MM03
Please help me in finding any field on waste packaging information in MM03. If it is there please let me know in which view we can find it, if not let me know where else i can find information on Waste packaging.
-
Adobe Illustrator preview icons changed since upgrade to Snow Leopard
all of my Illustrator files preview icons have changed since upgrading to snow leopard. They use to have the Ai logo. Now they have what looks like the Postscript icon. I believe preview icons are controlled by the OS so not sure what to do. Have don
-
My screen is dimming after 5 minutes. I've read through the forums and found a few answers, but I have my display set to never sleep, and I do not have the option of "automatically reduce brightness before display goes to sleep" like my iMac and Mac
-
WLC 4402 Web Authentication, Mac Filtering and Layer 2 Seciruty
Hi All, I have configured web authentication and Mac filtering on WLC 4402 for my wireless network and its working fine. I wants to configure layer 2 security for the same Wireless network without pre shared key. Could you please advice how to config