Inbound delivery for subcontracting PO with BOM explosion

Hi all
The requirement is like this
Normal subcontracting cycle - Subcon PO and then 541
After that i did inbound delivery in VL31N for the subcon PO , Here iam getting the finished goods line item so that i can enter the delivery qty and serial number for the finished componenet
My query is , Is there any possibility of exploding the BOM and entering the serial number for the assembly level materials in the inbound delivery itself.
After that based on inbound delivery i can do GR , Your inputs pls
Regards
Amuthan M

Hi M.
You can do that using MIGO but not through VL31N.
For that you have to set the serial profile for component before.
IMG -> Logistic Execution -> Shipping -> Basic Shipping Functions -> Serial Numbers -> Central Control Parameters for Serial Numbers
IMG -> Logistic Execution -> Shipping -> Basic Shipping Functions -> Serial Numbers -> Determine Serial Number Profiles
After that you have to set the serial profile for the component.
Hope this help
Regards.

Similar Messages

Create inbound delivery for same material with multiple batches

Hi Experts,
An ASN( advanced shipping notification) contains multiple batch numbers for same material or line item.An IDOC has different segments with batch numbers but in SAP while creating Inbound delivery(VL31N) only batch number ( segment) get posted automatically in SAP other batches are need to post manuaaly.
I am using IDoc type : Delivery03 ,Message type: DESADV
How to resolve this problem?
Thanks,
Anil

Hi Anil,
Welcome to SCN for your first post. Did you check with your functional people about this.
Regards,
Madhu.

Inbound Delivery for Subcontracting Stock

Hello Experts,
I have some material supplied to the subcontractor via outbound delivery and material document is posted through 543 mvt type. Now, there are some quantity which is left during the subcontracting process and I want this material back to our unrestricted stock using INBOUND DELIVERY. (I can do it using MB04 without inbound delivery). Any suggestion?
Thanks in advance.
Regards
Arif

Hi,
Check on it:-
How to do 543 for the sub-contracting components in HUM storage location
Schedule agreement & Inbound delivery
http://help.sap.com/saphelp_dimp50/helpdata/en/bc/5bba42a75fc611e10000000a1550b0/content.htm
pherasath

How to create inbound delivery for items with no confirmation control key.

hi Please help me with this..
are there any user exits to create an inbound delivery for scheduling agreement items with no confirmation control key.
my req is
i have 12 items (me33 transaction) of them three have confirmation control key populated and out of those three 2 will be deleted so only one item is left for inbound delivery creation, but i need to have all this possible for all items with or without confirmation control key.
thank you

hi
for inbound delivery there is BAdi called LE_SHP_DELIVERY_PROC... in there is method called ITEM_DELETION... in this u can flag the item to delete or not..
this will be triggered for inbound as well as oubound delivery..
you can check confirmation status for the PO in the table EKES... in this table there is filed called EBTYP.. using this field u can check the PO item confirmation status..
I hope above information is helpuful for u

Inbound Delivery For Scheduling Agreement Lines using LSMW

Hi,
We need to create inbound deliveries for scheduling agreements. Our scheduling Agreements are too big with 200 lines. But the vendor used to send only few discrete lines in his ASN. Is it possible to create inbound deliveries for the Scheduling agreement using LSMW? Is there any standard BAPI or IDOC available to handle this in LSMW? Has anyone done this before?
Our requirement is as follows.
1. Create Inbound Delivery for few lines of the Scheduling Agreement
2. The delivery quantity of the inbound delivery will be a partial quantity of the Scheduling Agreement
3. Materials are batch managed and the batch number for each inbound delivery item need to be captured.
4. Vendor's ASN Number and its item number need to be captured at inbound delivery header and item level respectively.
Note: Delivery Schedule of the Scheduling Agreement is not used in the above scenario.
If you have any input, it will be really appreciated.
Regards,
SP0526

Hi,
You can give your scheduling agreement number in the field Purchase Order.
If you want select from the list, you can click on PO tree (just under create inbound delivery). There selet document category as "L". You will get the scheduling agreement list.
Regards,
Prabu

How to create one inbound delivery for multiple purchase order?

Hi Experts,
Please let me know how can I create one inbound delivery for multiple purchasing documents(PO or SA)?
Is there a configuration needed for this? If yes, please let me know the configuration to make this happen.
Appreciate your help on this. Right answers will be rewarded.
Thank you.
with regards,
Muthu Ganapathy.

Hi,
my situation is:
- a WM managed warehouse, society A;
- a HU managed warehouse (without WM), society B;
- a purchasing process of HU from society A towards society B.
Society B have a scheduling agreement; when a delivery schedule appears, in society A born a sales order and a delivery. After the registration of the delivery good issue, an idoc transfer information for inbound delivery creation.
This process is ok without WM, but with a WM managed warehouse the idoc has the following problem:
"V51VP - item was not found - process cancelled".
Can you help me to transfer these HU?

Goods receipt through Inbound delivery for Sub-Contracting Purchase order

Hi
I am trying to do goods receipt for the inbound delivery /shipping notification created for a sub -contracting Purchase order. The Finished product and the component part are batch managed, When I try to perform PGR in VL32N , I am getting a blank screen as error message and Goods receipt is not getting triggered . I checked for OSS note and found 645119 close to my issue but not an exact match . We are in ECC 6.0 with EHP 4. Can some one clarify whether it is possible to post GR through inbound delivery for a Subcon Purchase order .
Thanks in advance for your immediate response.
with regards,
Joseph Anand B

Hi, The issue may be due to this - the component is batch managed but the batch data is blank in the component list of the Purchase Order Item. Or a batch is maintained in the PO item component list but the stock for the same batch is not available with Vendor, i.e. stock with some other batch may be available.
In a receipt for Sub-cont PO, 101 happens for FG and 543 happens for component. But there is no option to provide the component details in a delivery. So in standard system, when 101 happens via a delivery, 543 will be posted in the background. So any error in posting 543 will result in a blank screen without any error message.
You can fix this by maintaining correct batch in the PO component list.
But there is another issue - you cannot do 'cancel posting' and 'return delivery' for this receipt. Only you can reverse the inbound delivery and you should know that the recevied stock shouldn't have been processed to do reversal of inbound delivery.

GR to be done against only Inbound delivery for selected vendors

GR to be done against only Inbound delivery for selected vendors. If the user putsthe combination " Goods Receipt+ Purchase Order+ Purchase Order Number " in MIGO , the error should be displayed as "Create MIGO with Ref to ASN"
     At the time of MIGO, when user put the combination of Goods Receipt+ Purchase Order and purchase order number, BADI will activate.
     BADI will search the vendor code from the entered purchase order in the Z table in which user maintain the vendor codes.
     If BADI finds the vendor code in the Z table then, will give error as u201CPlease create inbound delivery firstu201D.
     If BADI does not find the vendor code in Z table then it will inactive.
     In short we are restricting the selected vendor for MIGO with reference to PO.

Hi,
If u had used confirmation control key (0001) - In Item details of PO, as per standard SAP u cannot proceed for GR without inbound delivery. Otherwise use MB_MIGO_BADI. Thanking you

Without MRP, with BOM explosion

Hi,
I'm new to SAP and learning SAP SCM. I would like someone to brief me on what the following lines imply, especially 'without MRP, with BOM explosion'.
"dependent requirements must be determined for materials that are planned in SAP ECC. So, you assign the MRP type X0 with MRP procedure X (without MRP, with BOM explosion) to the materials planned in SAP SCM."
Thanks,
Krish

Hi,
Without MRP , with BOM explosion - means the dependent requiremens are created for this materials from APO.
The MRP will not run in APO. Only the dependent requirements will be created from APO. The MRP for this materials will be executed the ECC or R/3 system to create planned order anb purchase requisitions.
Thanks and regards
Murugesan

Inbound delivery for a STO ??

Hi
What are the steps to do a Inbound delivery for a STO so that I can do Goods Receipt using that Inbound delivery in receiving plant.??
Pls tell me the configuration steps involved and other relevant steps involved.
Also give me any SAP help link too.
Thanks
Maruthi Ram

Hi,
You have to do Replenishment delivery (Outbound) at the issuing plant and goods receipt in the receiving plant with respect to the same.
Process Flow (Stock Transport Order with Delivery and Billing Document/Invoice ):
Creating a stock transport order in the receiving plant
Purchasing also determines the price for the materials.
Posting a delivery in the issuing plant
The issuing plant enters a replenishment delivery in Sales and Distribution. Unlike a stock transfer without a billing document, no stock in transit is created.
Creating a billing document in the issuing plant
The issuing plant creates the billing document for the delivery. SD also determines the price for the delivery
Posting a goods receipt in the receiving plant
The receiving plant posts a goods receipt for the delivery. The goods are posted to unrestricted-use stock
Posting an invoice in the receiving plant
The invoice referring to the billing document is entered in the receiving plant.
Please refer to link: http://help.sap.com/saphelp_47x200/helpdata/en/4d/4b9036dfe4b703e10000009b38f889/frameset.htm
for further details.
Regards,
Narayana.

Creating inbound delivery for the purchase order line items

Hi Experts,
Please let me know how can I create inbound delivery for the purchase order line items? Say, I have a purchase order with 5 line items in it. I wanted to create an inbound delivery for only 2 line items at this point of time. Which SAP Standard transaction I have to use and what all data I need to populate? I would appreciate any help on this and will reward the right answer. Please let me know.
Thank you in advance.
with regards,
Muthu Ganapathy.

Hi,
While creating the inbound delivery (VL31N), intially all the items will be shown, see the advance shipping notfication - from the vendor for which he has send confirmation & rest items you can delete simply & save. & next time when the vendor sends rest advance shipping notifcation (confirmation), you can receive them.
Hope this answers your query.
Regards
Irfan.

How to create inbound delivery (for ASN)?

Hi,
I am looking for a Bapi or a FM to create an inbound delivery for Advance shipment notification (ASN). This function module for creating will be called in the user-exit in the invoice posting idoc program. The manual way to create this inbound delivery is by VL31N. Any help and there experience will be appreciated.
Thanks
Ramesh

Hi,
I am calling this FM after creating a PO with BAPI PO_CREATE1 and it works. I also get the delivery number.
Only create if there were no errors with the po
read table return with key type = 'E' transporting no fields.
check sy-subrc <> 0 and testrun <> 'X'.
read table poschedule into ls_schedule index 1.
ls_del_header-delivery   = lv_del_no.
call function 'CONVERT_DATE_TO_INTERNAL'
    exporting
      date_external            = ls_schedule-delivery_date
    importing
      date_internal            = ls_del_header-deliv_date
    exceptions
      date_external_is_invalid = 1
      others                   = 2.
if sy-subrc <> 0.
    clear ls_ret2.
    ls_ret2-message = 'Anlieferung Fehler bei Datumskonvertierung!'.
    append ls_ret2 to return.
endif.
ls_del_header-deliv_time = sy-uzeit.
For each position create single delivery
loop at poitem into ls_po_item.
    clear: ls_del_item.
    ls_del_item-delivery   = lv_del_no.
    ls_del_item-deliv_item = ls_po_item-po_item.
    ls_del_item-deliv_qty = ls_po_item-quantity.
    ls_del_item-unit      = ls_po_item-po_unit.
    ls_del_item-po_number = poheader-po_number.
    ls_del_item-po_item   = ls_po_item-po_item.
    ls_del_item-po_number = LV_EXPPURCHASEORDER.
    insert ls_del_item into table lt_del_items.
endloop.
Create delivery
call function 'BBP_INB_DELIVERY_CREATE'
    exporting
      is_inb_delivery_header = ls_del_header
    importing
      ef_delivery            = ls_likp-vbeln
    tables
      it_inb_delivery_detail = lt_del_items
      return                 = lt_return.
loop at lt_return into ls_return.
Convert return table to bapiret2
    call function 'BALW_RETURN_TO_RET2'
      exporting
        return_in = ls_return
      importing
        return_ou = ls_ret2.
    append ls_ret2 to return.
endloop.
commit work and wait.

Can we have a single inbound delivery for multiple po???

Hi
can we have a single inbound delivery for multiple po??? what are the steps to do it?
how to do spro settings??
please help me out.
regards
Arya

Yes you can have and for that you don't need any config.
just go to VL31N and from header hit the purchase order button and either enter the PO numbers or let system pulls the PO based on the selection adn than select all the POs adn hit adopt selected button and save.
this will create one inbound delivery

Creation of delivery for subcontract Purchase Order

Hi All,
I am trying to create delivery for subcontract PO. ME2O transaction creates delivery but doesn't link PO to delivery . Is there any SAP table where we can see link of subcontract PO to delivery created throug ME2O?
Business don't want to use MB1B transaction because it doesn't create delivery inturn doesn't create any paper work(Pick list or Packing list).
Is there any way to create delivery based on subcontract PO?
Thanks in advance.
Sonali.

You have to do Sub con PO setup in Img customization. You can be able to print all ur required documents during MB1B also. Presently I am doing exact the same setting for my present project. Complete Configuration required under
Img->MM->IM and PI->Output Determination.ABAP help will be required to design the layout for pick list and packing list.Let me know if you need more information.
Cheers!

Post GR against inbound delivery for purchase order

Hi All ,
I am trying to post goods receipt against inbound delivery for PO and using BAPI_GOODSMVT_CREATE .
But the BAPI is not posting GR.Is there any other way to do it ??
Regards,
Shital.

u can pass
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
         EXPORTING
              GOODSMVT_HEADER = GOODSMVT_HEADER
              GOODSMVT_CODE    = GOODSMVT_CODE
              TESTRUN          = TESTRUN
         IMPORTING
              MATERIALDOCUMENT = MATERIALDOCUMENT
         TABLES
              GOODSMVT_ITEM    = L_GOODSMVT_ITEM
              RETURN           = RETURN.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
              WAIT = 'X'.
and u also refer following link
http://www.sap-img.com/abap/bapi-goodsmvt-create-to-post-goods-movement.htm
Edited by: Krupaji on Dec 1, 2010 9:29 AM

Inbound delivery for subcontracting PO with BOM explosion

Similar Messages

Maybe you are looking for